Professional Documents
Culture Documents
Product Overview
Super Jack IV
Super Jack III
Multi Handler
Wheel Handler
Super Jack IV
Lift
Multi120 tons safely and efficiently
Handler
Designed specifically for use with the over 300 short
ton haulage trucks, the Super Jack IV, has adapters for
different types of heavy equipment to match either front
or rear lift points. Easily maneuverable by one person, the
Super Jack IV has a safety lock formed by two pawls on
the lift carriage that engages two racks on the jack frame
for a positive mechanical lock.
Note:
The Liebherr Super Jack IV is intended for use inside a
maintenance shop with a smooth, level hard-surfaced
floor. Rough surfaces or grades over 1% may limit
performances or stability.
55” (1.40 m)
36”
(0.91 m)
122 3/4” (3.11 m)
101” (2.57 m)
SUPER JACK IV
37 1/2” (0.95 m)
2
Super Jack III
Lift 90 tons easier, faster and safer
The versatile Liebherr self propelled Super Jack III has
adapters to lift different types of heavy equipment. The
Super Jack III provides unequaled stability, through a
straight line vertical lift to a mechanically locked position.
The superior load distribution and massive construction
of the jack, reduce stress in the lift area. Wheels, power
steering and a ride on platform save time by allowing one
person to precisely position the all hydraulic jack.
Note:
The Liebherr Super Jack III is intended for use inside a
maintenance shop with a smooth, level hard-surfaced
floor. Rough surfaces or grades over 1% may limit
performances or stability.
62 1/4” (1.58 m)
30 1/4”
(0.77 m)
109 3/4” (2.79 m)
73 3/4” (1.87 m)
58” (1.47 m)
87 1/4” (2.21 m) 12” (0.30 m) 119 7/8” (3.04 m)
Fully Retracted
91 3/8” (2.32 m)
3
Multi Handler
Designed specifically for lifting and positioning large
components. The Liebherr MH-4500 Multi Handler
is a hydrostatically, self propelled tool for lifting and
positioning of large components during maintenance or
repair. Equipped with a ride-on platform, one person can
easily maneuver the Multi Handler into tight working areas
with the replacement component safely secured.
4
131 1/4” (3.33 m) Turret Rotation 270
82 3/4” (2.10 m)
94” (2.39 m) 45
90
88” (2.23 m)
20 3/4” (0.53 m)
Horizontal Range Head Tilt
29
96” (2.44 m)
19” (0.48 m)
110” (2.79 m)
5
Wheel Handler
4.5 9.5
4.5 9.5
6
Liebherr’s self propelled Wheel Handler handles heavy Two different adapters are available for use with the Wheel
components up to 44,000 lbs/19,960 kg for dismounting, Handler as optional equipment:
transporting and remounting a variety of heavy • Front Suspension Module Adapter
components, including large wheel motors. With front • Suspension Removal Tool
and rear raise/lower, tilt, rotate and side-shift features the
unit easily aids in installation or removal of wheel motors. The Liebherr Wheel Handler is intended for use inside a
Auxiliary hydraulic power ports and optional attachments maintenance shop with a smooth, level, hard-surfaced
allow the Wheel Handler to be used in handling other floor. Rough surfaces or grades over 1% may limit
heavy equipment components such as suspensions, and performance or mobility.
front wheel assemblies.
7
Liebherr Maintenance Tools – In use World wide
Printed in Germany by BVD BK-RP LME 8434208-2-08.04 Subject to change without notice.