Professional Documents
Culture Documents
interface
no shut GigabitEthernet 0/1
interface
system-view
ip add 192.168.20.1 24
[H3C-GigabitEthernet0/1]
<H3C>ip
interface
add 192.168.20.1
GigabitEthernet
24 0/1
no shut
system-view
System View: return to User View with Ctrl+Z.
[H3C]ospf
[H3C-ospf-1]?
Ospf protocol view commands:
area OSPF area parameters
asbr-summary Configure aggregate addresses for OSPF(only for
ASBR)
bandwidth-reference Use reference bandwidth method to assign OSPF cost
default Set default value
default-route-advertise Control distribution of default information
description Specify OSPF Process description
dialer Dialer disconnect
display Display current system information
enable Enable OSPF specific features
filter-policy Filtering networks in routing updates
graceful-restart Graceful Restart
import-route Redistribute information from another routing
protocol
log-peer-change Output notification information of neighbor state
changes
logfile Specify log file configuration
lsa-arrival-interval LSA arrival interval
lsa-generation-interval LSA generation interval
lsdb-overflow-limit Set the OSPF link-state database overflow limit
maximum Forward packets over multiple paths
maximum-routes Set the maximum number of OSPF routes in routing
---- More ---- table
mtracert Trace route to multicast source
opaque-capability Specify capability of supporting Opaque LSA
peer Specify a neighbor router
ping Ping function
preference OSPF protocol route preference
quit Exit from current command view
return Exit to User View
rfc1583 Compatible with RFC 1583
route-tag Tag for OSPF external routes
save Save current configuration
silent-interface Suppress routing updates on interfaces
spf-schedule-interval SPF schedule Interval
stub-router Specify a stub router
tracert Trace route function
transmit-pacing OSPF update transmit timer
undo Cancel current setting
[H3C-ospf-1]
<H3C>ospf
system-view
System View: return to User View with Ctrl+Z.
[H3C]ospf /?
INTEGER<1-65535> Process ID
mib-binding Mib Process Binding
packet-process Processing OSPF packets
router-id OSPF Private router ID
<cr>
[H3C]ospf 1
[H3C-ospf-1]?
Ospf protocol view commands:
area OSPF area parameters
asbr-summary Configure aggregate addresses for OSPF(only for
ASBR)
bandwidth-reference Use reference bandwidth method to assign OSPF cost
default Set default value
default-route-advertise Control distribution of default information
description Specify OSPF Process description
dialer Dialer disconnect
display Display current system information
enable Enable OSPF specific features
filter-policy Filtering networks in routing updates
graceful-restart Graceful Restart
import-route Redistribute information from another routing
protocol
log-peer-change Output notification information of neighbor state
changes
logfile Specify log file configuration
lsa-arrival-interval LSA arrival interval
lsa-generation-interval LSA generation interval
lsdb-overflow-limit Set the OSPF link-state database overflow limit
maximum Forward packets over multiple paths
maximum-routes Set the maximum number of OSPF routes in routing
---- More ---- table
mtracert Trace route to multicast source
opaque-capability Specify capability of supporting Opaque LSA
peer Specify a neighbor router
ping Ping function
preference OSPF protocol route preference
quit Exit from current command view
return Exit to User View
rfc1583 Compatible with RFC 1583
route-tag Tag for OSPF external routes
save Save current configuration
silent-interface Suppress routing updates on interfaces
spf-schedule-interval SPF schedule Interval
stub-router Specify a stub router
tracert Trace route function
transmit-pacing OSPF update transmit timer
undo Cancel current setting
[H3C-ospf-1]r
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C]rip ?
INTEGER<1-65535> Process ID
mib-binding RIP MIB binding process
<cr>
[H3C]rip 1
[H3C-rip-1]?
Rip protocol view commands:
checkzero Perform the checkzero operation in the zero fields
of RIP-1 packets
default Specify default metric for imported routes
default-route Enable advertisement of default routes
dialer Dialer disconnect
display Display current system information
filter-policy Specify route filtering policy
host-route Enable receiving host-routes
import-route Import routes from other protocols into RIP
logfile Specify log file configuration
maximum Set maximum number of balanced paths
mtracert Trace route to multicast source
network Enable the routing protocol on the related network
or interface
output-delay Set interval between sending update packets
peer Specify a peer router
ping Ping function
preference Specify RIP route preference
quit Exit from current command view
return Exit to User View
save Save current configuration
silent-interface Suppress RIP packets from being sent on the
---- More ---- specified interface
---- More ----
summary Enable route summariz
ation
---- More ----
timers Adjust the protocol t
imers
---- More ----
tracert Trace route function
---- More ----
trip Specify TRIP(Triggere
d RIP) configuration
---- More ---- information
---- More ----
undo Cancel current settin
g
---- More ----
validate-source-address Validate the source I
P address of received RIP
---- More ---- updates
---- More ----
version Specify RIP version
---- More ----
[H3C-rip-1]
[H3C-rip-1]
[H3C-rip-1]
[H3C-rip-1]
[H3C-rip-1]
[H3C-rip-1]
<H3C>ssystem-view
ospf
rip 11
System View: return to User View with Ctrl+Z.
[H3C]ospf 1
[H3C-ospf-1]network ?
^
% Unrecognized command found at '^' position.
[H3C-ospf-1]network
^
% Unrecognized command found at '^' position.
[H3C-ospf-1]?
Ospf protocol view commands:
area OSPF area parameters
asbr-summary Configure aggregate addresses for OSPF(only for
ASBR)
bandwidth-reference Use reference bandwidth method to assign OSPF cost
default Set default value
default-route-advertise Control distribution of default information
description Specify OSPF Process description
dialer Dialer disconnect
display Display current system information
enable Enable OSPF specific features
filter-policy Filtering networks in routing updates
graceful-restart Graceful Restart
import-route Redistribute information from another routing
protocol
log-peer-change Output notification information of neighbor state
changes
logfile Specify log file configuration
lsa-arrival-interval LSA arrival interval
lsa-generation-interval LSA generation interval
lsdb-overflow-limit Set the OSPF link-state database overflow limit
maximum Forward packets over multiple paths
maximum-routes Set the maximum number of OSPF routes in routing
---- More ----
[H3C-ospf-1]
******************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface con0 is available.
[H3C]display
display interface
ospf interface
GigabitEthe
GigabitEthern
rnet 0/0
et 0/0
GigabitEthernet0/0 current state: UP
Line protocol current state: UP
Description: GigabitEthernet0/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 192.168.10.5/24 Primary
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0023-89a5-4a20
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0023-89a5-4a20
Media type is twisted pair, loopback not set, promiscuous mode not set
100Mb/s, Full-duplex, link type is autonegotiation
Output flow-control is disabled, input flow-control is disabled
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate 9.06 bytes/sec, 72 bits/sec, 0.12 packets/sec
Last 300 seconds output rate 8.69 bytes/sec, 69 bits/sec, 0.11 packets/sec
Input: 788 packets, 71250 bytes, 788 buffers
110 broadcasts, 554 multicasts, 0 pauses
0 errors, 0 runts, 0 giants
0 crc, 0 align errors, 0 overruns
0 dribbles, 0 drops, 0 no buffers
Output:545 packets, 109601 bytes, 545 buffers
13 broadcasts, 393 multicasts, 0 pauses
---- More0----
errors, 0 underruns, 0 collisions
---- More0----
deferred, 0 lost carriers
---- More ----
[H3C]
[H3C]
[H3C]
[H3C]ping 192.168.10.1
PING 192.168.10.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.10.1: bytes=56 Sequence=1 ttl=64 time=2 ms
Reply from 192.168.10.1: bytes=56 Sequence=2 ttl=64 time=1 ms
Reply from 192.168.10.1: bytes=56 Sequence=3 ttl=64 time=1 ms
Reply from 192.168.10.1: bytes=56 Sequence=4 ttl=64 time=1 ms
Reply from 192.168.10.1: bytes=56 Sequence=5 ttl=64 time=1 ms
--- 192.168.10.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
[H3C]ping
display
192.168.10.1
interface GigabitEthernet 0/0
ping 192.168.10.1
1.1
PING 192.168.1.1: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out
--- 192.168.1.1 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
[H3C]conf t
^
% Ambiguous command found at '^' position.
[H3C]ospf
[H3C-ospf-1]?
Ospf protocol view commands:
area OSPF area parameters
asbr-summary Configure aggregate addresses for OSPF(only for
ASBR)
bandwidth-reference Use reference bandwidth method to assign OSPF cost
default Set default value
default-route-advertise Control distribution of default information
description Specify OSPF Process description
dialer Dialer disconnect
display Display current system information
enable Enable OSPF specific features
filter-policy Filtering networks in routing updates
graceful-restart Graceful Restart
import-route Redistribute information from another routing
protocol
log-peer-change Output notification information of neighbor state
changes
logfile Specify log file configuration
lsa-arrival-interval LSA arrival interval
lsa-generation-interval LSA generation interval
lsdb-overflow-limit Set the OSPF link-state database overflow limit
maximum Forward packets over multiple paths
maximum-routes Set the maximum number of OSPF routes in routing
---- More ---- table
---- More ----
mtracert Trace route to multic
ast source
opaque-capability Specify capability of supporting Opaque LSA
peer Specify a neighbor router
ping Ping function
preference OSPF protocol route preference
quit Exit from current command view
return Exit to User View
rfc1583 Compatible with RFC 1583
route-tag Tag for OSPF external routes
save Save current configuration
silent-interface Suppress routing updates on interfaces
spf-schedule-interval SPF schedule Interval
stub-router Specify a stub router
tracert Trace route function
transmit-pacing OSPF update transmit timer
undo Cancel current setting
[H3C-ospf-1]
<H3C>ospf
conf 192.168.10.1
ping t
192.168.1.1
display interface GigabitEthernet 0/0
e
abitEthe
rnet 0/0
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C]interface ?ether
Aux Aux interface
Bridge-Aggregation Bridge-Aggregation interface
Bridge-template Bridge template interface
Cellular Cellular interface
Dialer Dialer interface
GigabitEthernet GigabitEthernet interface
LoopBack LoopBack interface
MFR MFR interface
Mp-group Mp-group interface
NULL NULL interface
Serial Serial interface
Tunnel Tunnel interface
Virtual-Ethernet Virtual Ethernet interface
Virtual-Template Virtual template interface
Vlan-interface VLAN interface
[H3C]interface giga
[H3C]interface GigabitEthernet ?
<0-0> Adapter number
[H3C]interface GigabitEthernet 0/0
[H3C-GigabitEthernet0/0]?
Gigabitethernet_l3 interface view commands:
arp Configure ARP for the interface
attack-defense Specify attack defense policy configuration information
bridge Config interface of bridge set
bridge-set Config bridge set
dar Specify DAR configuration information
description Describe the interface
dhcp DHCP configuration subcommands
dialer Dialer disconnect
display Display current system information
duplex Status of duplex
enable Enable function
firewall Specify firewall function
flow-control Flow control command
flow-statistics Specify flow statistics configuration information
igmp Specify parameters for IGMP
ip Interface IP configuration commands
ipsec Specify IPSec(IP Security) configuration information
ipv6 IPv6 interface subcommands
llc2 Specify LLC2(Logical Link Control Class 2) configure
information
load-bandwidth Set load-sharing bandwidth
local-proxy-arp Local Proxy ARP function for same interface
---- More ---- Specify log file configuratio
logfile
n
loopback Specify loopback of current port
mac-address Configure MAC address
mirroring-group Specify mirroring-group
mirroring-port Specify mirroring port
mld Specify parameters for MLD
monitor-port Specify monitor port
mtracert Trace route to multicast source
mtu Specify Maximum Transmission Unit(MTU) of the interface
multicast Multicast information
nat Specify NAT(Network Address Translation) configuration
information
ntp-service Specify NTP(Network Time Protocol) configuration information
ospf OSPF interface commands
pim Specify interface parameters for PIM
ping Ping function
port Specify Port characteristics
portal Portal protocol
pppoe-client PPPoE Client Settings
pppoe-server Specify PPPoE(PPP over Ethernet) server configuration
information
proxy-arp Proxy ARP function
qos Command of QoS(Quality of Service)
---- More ----
quit Exit from current command vie
w
return Exit to User View
rip Specify interface parameters for RIP
rmon Specify RMON
save Save current configuration
shutdown Shut down this interface
speed Specify speed of current port
standby Specify interface-standby configuration information
tcp Specify TCP parameters of the interface
timer Specify hold timer
tracert Trace route function
udp-helper UDP HELPER module
undo Cancel current setting
vrrp Specify configuration information of VRRP
[H3C-GigabitEthernet0/0]timer ?
hold Hold timer
[H3C-GigabitEthernet0/0]timer hold ?
INTEGER<0-32767> The value of hold timer (in second)
[H3C-GigabitEthernet0/0]timer hold
<H3C>syatem-v
<H3C>syatem-v
^
% Unrecognized command found at '^' position.
<H3C>syatem-v
stem-v
tem-v
System View: return to User View with Ctrl+Z.
[H3C]display ospf ?
INTEGER<1-65535> Process ID
abr-asbr Information of the OSPF ABR and ASBR
asbr-summary Information of aggregate addresses for OSPF(only for ASBR)
brief brief information of OSPF processes
cumulative Statistics information
error Error information
interface Interface information
lsdb Link state database
nexthop Nexthop information
peer Specify a neighbor router
request-queue Link state request list
retrans-queue Link state retransmission list
routing OSPF route table
vlink Virtual link information
[H3C]display ospf erroer
OSPF Process 1 with Router ID 192.168.20.1
OSPF Packet Error Statistics
0 : OSPF Router ID confusion 0 : OSPF bad packet
0 : OSPF bad version 0 : OSPF bad checksum
0 : OSPF bad area ID 0 : OSPF drop on unnumbered interface
0 : OSPF bad virtual link 0 : OSPF bad authentication type
0 : OSPF bad authentication key 0 : OSPF packet too small
0 : OSPF Neighbor state low 0 : OSPF transmit error
4 : OSPF interface down 0 : OSPF unknown neighbor
0 : HELLO: Netmask mismatch 0 : HELLO: Hello timer mismatch
0 : HELLO: Dead timer mismatch 0 : HELLO: Extern option mismatch
0 : HELLO: Neighbor unknown 0 : DD: MTU option mismatch
0 : DD: Unknown LSA type 0 : DD: Extern option mismatch
0 : LS ACK: Bad ack 0 : LS ACK: Unknown LSA type
0 : LS REQ: Empty request 0 : LS REQ: Bad request
0 : LS UPD: LSA checksum bad 0 : LS UPD: Received less recent LSA
0 : LS UPD: Unknown LSA type
[H3C]odspf ?
INTEGER<1-65535> Process ID
mib-binding Mib Process Binding
packet-process Processing OSPF packets
router-id OSPF Private router ID
<cr>
display ospf ?
[H3C]ospf
INTEGER<1-65535> Process ID
abr-asbr Information of the OSPF ABR and ASBR
asbr-summary Information of aggregate addresses for OSPF(only for ASBR)
brief brief information of OSPF processes
cumulative Statistics information
error Error information
interface Interface information
lsdb Link state database
nexthop Nexthop information
peer Specify a neighbor router
request-queue Link state request list
retrans-queue Link state retransmission list
routing OSPF route table
vlink Virtual link information
[H3C]display ospf 21 ?
abr-asbr Information of the OSPF ABR and ASBR
asbr-summary Information of aggregate addresses for OSPF(only for ASBR)
brief brief information of OSPF processes
cumulative Statistics information
error Error information
interface Interface information
lsdb Link state database
nexthop Nexthop information
peer Specify a neighbor router
request-queue Link state request list
retrans-queue Link state retransmission list
routing OSPF route table
vlink Virtual link information
[H3C]display ospf 1 lsdb
OSPF Process 1 with Router ID 192.168.20.1
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 192.168.20.1 192.168.20.1 973 48 8000000D 0
[H3C]interface giga
[H3C]interface GigabitEthernet 0/0
[H3C-GigabitEthernet0/0]ospf ?
authentication-mode Specify an authentication mode
cost Interface link cost
dr-priority Router priority
mtu-enable Enable checking MTU on DD packets
network-type Specify OSPF network type
timer Specify timer interval
trans-delay Link state transmit delay
[H3C-GigabitEthernet0/0]ospf hello ?
^
% Unrecognized command found at '^' position.
[H3C-GigabitEthernet0/0]ospf hello
timer ?
dead Interval after which a neighbor is declared dead
hello Hello Interval
poll Poll Interval (on NBMA network)
retransmit Retransmit Interval
[H3C-GigabitEthernet0/0]ospf timer hello ?
INTEGER<1-65535> Second(s)
[H3C-GigabitEthernet0/0]ospf timer hello 30
%Oct 25 17:23:35:274 2010 H3C RM/3/RMLOG:OSPF-NBRCHANGE: Process 1, Neighbor 192
.168.10.1(GigabitEthernet0/0) from Init to Down
[H3C-GigabitEthernet0/0]ospf
interface
timerGigabitE
hello 30
mer hello 530thernet 0/0
[H3C-GigabitEthernet0/0]ospf timer hello
de55a5d55205 ?
<cr>
[H3C-GigabitEthernet0/0]ospf timer dead 20
[H3C-GigabitEthernet0/0]save
The current configuration will be written to the device. Are you sure? [Y/N]:
Before pressing ENTER you must choose 'YES' or 'NO'[Y/N]:y
Please input the file name(*.cfg)[cfa0:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
cfa0:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait....
Configuration is saved to device successfully.
[H3C-GigabitEthernet0/0]save ospf timer dead 20
<H3C>ospf
iospf timer hello 30
5
display
nterfaceospf GigabitEthernet
1 lsdb 0/0
display ospf error
syatem-v
system-v
syatem-v
system-v
System View: return to User View with Ctrl+Z.
[H3C]system-v
save timer hell
ospf dead 20
rface
timerGigabitEthe
helloo 530
pf 1 lsdb rnet 0/0
disp
system-v
syatem-v
ay ospf error
display
interface
lay ospf 1error
lsdb
display ospfGigabitEthernet
1 lsdb 0/0
splay ospf error
stem-v
atem-v
display ospf 1error
lsdb
interfaceospf
display GigabitEthernet
1 lsdb 0/0
OSPF Process 1 with Router ID 192.168.20.1
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 192.168.20.1 192.168.20.1 124 48 80000011 0
dpisplay
[H3C]display
system-v
ing ospf 1 lsdb
[H3C]display ?
acl Acl status and configuration information
acsei Specify ACSEI(a method for exchanging information
between ACFP client and ACFP server) configuration
information
archive Display archive information
arp Display ARP information
aspf ASPF status and configuration information
atm ATM status and configuration information
attack-defense Specify attack defense policy configuration
information
bgp BGP information
blacklist Specify blacklist configuration information
boot-loader Display boot loader information
bootp BOOTstrap Protocol
bridge Bridge information
brief Brief information of status and configuration for
interface(s)
cellular Cellular Information
channel Informational channel status and configuration
information
clipboard Clipboard status and configuration information
clock Clock status and configuration information
component All registered component information
---- More ----
configure-user User currently editing
the configuration
connection Display connection information
connection-limit Specify connection limit configuration information
controller Specify controller
cpu-usage Cpu usage information
current-configuration Current configuration
dar DAR status and configuration information
debugging Current setting of debugging switches
device Display device information
dhcp Dynamic Host Configuration Protocol and BOOTP
debugging functions
diagnostic-information System information for diagnosis
dialer DCC status and configuration information
dlsw DLSw status and configuration information
dns DNS status and configuration information
domain Display domain configuration
dot1x 802.1x configuration information
dsl DSL status and configuration information
environment Display environment information
etofr EtoFR translate table information
etoppp EtoPPP translate table information
fan Display fan status
fe1 Interface FE1 status and configuration information
---- More ----
[H3C]display route
[H3C]display ip
route
route
^
% Unrecognized command found at '^' position.
[H3C]display ?ip route
acl Acl status and configuration information
acsei Specify ACSEI(a method for exchanging information
between ACFP client and ACFP server) configuration
information
archive Display archive information
arp Display ARP information
aspf ASPF status and configuration information
atm ATM status and configuration information
attack-defense Specify attack defense policy configuration
information
bgp BGP information
blacklist Specify blacklist configuration information
boot-loader Display boot loader information
bootp BOOTstrap Protocol
bridge Bridge information
brief Brief information of status and configuration for
interface(s)
cellular Cellular Information
channel Informational channel status and configuration
information
clipboard Clipboard status and configuration information
clock Clock status and configuration information
component All registered component information
---- More ----
configure-user User currently editing
the configuration
connection Display connection information
connection-limit Specify connection limit configuration information
controller Specify controller
cpu-usage Cpu usage information
current-configuration Current configuration
dar DAR status and configuration information
debugging Current setting of debugging switches
device Display device information
dhcp Dynamic Host Configuration Protocol and BOOTP
debugging functions
diagnostic-information System information for diagnosis
dialer DCC status and configuration information
dlsw DLSw status and configuration information
dns DNS status and configuration information
domain Display domain configuration
dot1x 802.1x configuration information
dsl DSL status and configuration information
environment Display environment information
etofr EtoFR translate table information
etoppp EtoPPP translate table information
fan Display fan status
fe1 Interface FE1 status and configuration information
---- More ----
fib FIB status and configu
ration information
firewall Specify firewall configuration information
firewall-statistics Firewall status and configuration information
flow-statistics Specify flow statistics configuration information
fr FR status and configuration information
ft1 Interface FT1 status and configuration information
ftp FTP client status and configuration information
ftp-server FTP server status and configuration information
ftp-user FTP users status and configuration information
history-command The historical command information
hotkey Hotkey status and configuration information
hwtacacs HWTACACS server information
icmp ICMP information
igmp IGMP status and configuration information
ike IKE status and configuration information
info-center Show information center configuration and contents
interface Status and configuration information for the
interface
ip Specify IP(Internet Protocol) configuration
information
ipsec IPSec module status or configuration information
ipv6 IPv6 status and configuration information
isdn ISDN status and configuration information
---- More ----
job Schedule a system task
l2tp L2TP status and configuration information
llc2 LLC2 status and configuration information
load-sharing Load-sharing information
local-proxy-arp Display Local proxy ARP information
local-user Local user(s) information
logbuffer Logbuffer status and configuration information
logfile Display log file information
loopback-detection Detect if loopback exists
mac-address MAC address information
memory Display memory information
mfr Multilink FR configuration information
mib-style MIB style
mirroring-group Specify mirroring-group
mld MLD status and configuration information
msdp MSDP status and configuration information
multicast Multicast configuration
nat NAT status and configuration information
nqa Display NQA information
ntp-service NTP(Network Time Protocol) service
ospf Open Shortest Path First (OSPF)
patch Display patch configuration information
pim PIM status and configuration information
---- More ----
pki Display PKI informatio
n
policy-based-route Policy-based Route status and configuration
information
port Display port information
port-group Port group
port-isolate Port-isolate group information
port-security Display port-security configuration
portal Portal protocol
power Display power status
ppp PPP status and configuration information
pppoe-client PPPoE Client status and configuration information
pppoe-server PPPoE server status and configuration information
proxy-arp Display proxy ARP information
public-key Specify public-key module configuration information
qos QoS status and configuration information
radius Display RADIUS configuration information
reboot-type Display reboot type
rip RIP status and configuration information
rmon RMON information
route-policy Display configured route-maps
router Configure Router information
rps Display Redundant Power System status
sampler Display sampler information
---- More ----
saved-configuration The saved configuratio
n information
schedule Schedule system task
sftp Display the source specified
snmp-agent SNMP status and configuration information
ssh SSH status and configuration information
standby Standby-interface status and configuration
information
startup Display the configuration for startup
stop-accounting-buffer No response acct-stop packet buffered in local memory
stp Spanning tree protocol
system-failure System failure handling method
tcp TCP status and configuration information
telnet TELNET status and configuration information
tftp TFTP client status and configuration information
this This view's current configuration
time-range Time range status and configuration information
track Display track information
traffic Traffic configuration information
transceiver Transceiver information
trapbuffer Trapbuffer status and configuration information
udp UDP status and configuration information
udp-helper UDP HELPER module
user-group Display user group(s) configuration information
---- More ----
user-interface Terminal user interfac
e status and configuration
information
userlog Userlog feature
users Login users status and configuration information
version System hardware and software version information
virtual-access Virtual-access interface status and configuration
information
vlan VLAN configuration information
voice Voice
vrrp VRRP status and configuration information
web Web
x25 X.25 status and configuration information
[H3C]display router ?
id Config router ID
[H3C]display ospf
router
^
% Incomplete command found at '^' position.
[H3C]display ospf 1 ?
abr-asbr Information of the OSPF ABR and ASBR
asbr-summary Information of aggregate addresses for OSPF(only for ASBR)
brief brief information of OSPF processes
cumulative Statistics information
error Error information
interface Interface information
lsdb Link state database
nexthop Nexthop information
peer Specify a neighbor router
request-queue Link state request list
retrans-queue Link state retransmission list
routing OSPF route table
vlink Virtual link information
[H3C]display ospf 1 brief
OSPF Process 1 with Router ID 192.168.20.1
OSPF Protocol Information
RouterID: 192.168.20.1 Border Router:
Route Tag: 0
Multi-VPN-Instance is not enabled
SPF-schedule-interval: 5
LSA generation interval: 5
LSA arrival interval: 1000
Transmit pacing: Interval: 20 Count: 3
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
Route Preference: 10
ASE Route Preference: 150
SPF Computation Count: 14
RFC 1583 Compatible
Graceful restart interval: 120
Area Count: 1 Nssa Area Count: 0
ExChange/Loading Neighbors: 0