You are on page 1of 72

Proposal for EOD Vehicle

*Note: The budgetory cost of the offer enclosed is approx Rs 3 Crores inclusive of Customs Duty &
VAT. Please note that the warranty period is for 3 years.

Totem International Limited,

#6, Totem House, Panjagutta, Dwarakapuri Colony, Hyderabad - 500 082, AP, INDIA,

PH: +91 40 23350097 / 23350199, Fax: +91 40 23350082, Mobile: +91 96186 21234

Email: firoze@totemint.com www.totemint.com

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Proposal for EOD Vehicle

We are proposing a vehicle Equipped with following items :

1. Hand held Explosive Detector: Hardened Mobile Trace - Morpho


2. Itemiser - Morpho
3. Night Vision Device IGen 20/20
4. Thermal Imager
5. Bomb Blanket
6. Forensic Voice Stress Analyzer - ITVT
7. Maxvision BPAC Biometric Tough Pocket Notebook
8. Cobra e Software
9. Bomb Suit
10. Render Safe Procedure ( RSP ) Tool Kit
11. Real Time Viewing System
12. Car Remote Tool Opening kit
13. Drilling Machine
14. Thermal Cutter
15. Water Jet Disruptor
16. Hook & Line Set
17. Portable generator
18. NLJD
19. Deep search Metal detector
20. Swat Boots & FR Dungaree
21. Endoscope
22. UPS GE Digital Energy
Personal Protective Equipment
23. BP Helmet - IA
24. Bomb Basket SM Group
25. RSDL Chemical Wipes
Optional accessories inorder to made EOD into NBC Cruiser.
26. Street Lab Mobile - Morpho
27. Ground penetrating Radar ( can be used in EOD Vehicle also )
28. Idaho Biological detector
29. Portable Air filter cabinets - Respirex
30. Radiation Monitor Coleparmer
31. CBRN Suits Respirex
32. CBRNE software upgrade Full scale versions

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Please find the options for the vehicles as follows:

1. FORCE MOTORS Traveller 3350 WB, DV Long BS-III


2. FORCE MOTORS Traveller 3050 MM WB DV Short (HR) BS-III
3. TATA 407

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Specifications of Force Traveller:

• Engine: Engine Description - 2.6L 75bhp DI TCIC


• Engine Displacement - 2,596 cc
• No. of Cylinders 4
• Fuel Sup ply Syste m- Direct Injection
• Maximum Po wer - 76 @ 3,200 (PS@rpm)
• Maximum Torque - 20 @ 1,800-2,000 (kgm@rpm)
• Turbocharger No
• Supercharger - No
• Transmission
• Transmission Type Manual
• Gearbox - 5 Speed
• Suspension System
• Front Suspensi on- Parabolic leaf spring wit h anti roll bar
• Rear Suspension - Parabolic leaf spring anti roll bar
• Shock Absorbers Type Telescopic
• Steering
• Steering Type Power
• Turning Radius (wheel base) - 6.5 m
• Brake System
• Front Brake Type- Disc
• Rear Brake Type Drum
• Fuel
• Fuel Type Diesel
• Fuel Tank Capacity - 70 litres
• Mileage - 16.1 kmpl
• Emission Norm Compliance - Bha rat Stage III
• Tyres
• Tyre Size - 215/80 R 14 (f ront ) 215/75 R 15 (re ar)
• Wheel Size - 14 & 15 (rear)
• Exterior Dimensions
• Length - 5, 415 mm, W idth - 1,902 m m, Height - 2,550 mm

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• Ground Clearance 190 mm
• Wheelbase - 3,350 mm
• Gross Weight - 3,510 kg
• Kerb Weight - 2,020 kg
• Other Specifications
• Seating Capacity - 13 or 14
• No. of Doors - 3

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


TATA 407:

Tata 407 (4x4)

Manufacturer : TATA.

Role :Cross Country Operations with 1 ton payload.

Engine :Tata 4SP Turbo.

Clutch :Single Plate Dry friction type.

Gear Box :Synchromesh.

Axles : Both live axle and differential lo ck provided.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Brakes :Vacuum assisted independent Hydraulic brakes.

Electrical : 12 Volts.

Steering : Mechanical
.............Optional - Hydraulic Power Assisted Steering.

Gradeability :57º

Variant : GS role, Hard To p Troop Carrier.

Side view of the Vehicle

13 6
2

9 4 5 12 3 1

8 11 10

Proposal for EO D Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


1. Hand held Explosive Detector: Hardened Mobile Trace
2. Itemiser
3. Night Vision Device
4. Thermal Imager
5. Bomb Blanket
6. Forensic Voice Stress Analyzer - ITVT
7. Finger print recognition BPAC
8. Radiation Meter Cole Parmer
9. CBRN Software COBRA
10. Bomb Suit
11. Render Safe Procedure ( RSP ) Tool Kit

Vehicle Equipped for EOD


Hand held Explosive Detector: Hardened Mobile Trace

Hardened Mobile Trace - Morpho:

Rugged, P ortable, Tested


Detects CWAs, TICs, explosives, precursors, narcotics and taggants
Designed for challenging environments: extreme temperature, dust, moisture,salt fog, and rain
Physical shock- and vibration-resistant
Tested to MIL-STD-810-Gand IP54 rated
100% Buy American Act compliant

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Military
Designed for rigors of military use
Detects most common and emerging explosive threa ts including peroxides, CWAsand TICs
Portable checkpoint screening
Temperature range -20°C to 55°C (-4°F to 131°F)
Dust resistant
Accurate, specific, reliable

Ruggedized
Tested to MIL-STD-810-G
IP54 Rated
Temper atures range: -20°C to 55°C (-4°F to 131°F)
Humidity range: 0- 95% rH noncondensi ng
Sal t fog resistant
Drop- and vi bration-tested

Expanded Substance Detection


Tested and verified at government and third-party labs
CWAs library: bl ood, bl ister, nerve
TICs library: incl udi ng chlorides, cyani des, aci ds and ammonias

Ease of Use
Daylight readable touch screen (800 NIT)
Simpl e user interface and intuitive menus
Phone, e-mail, and field service engineer techni cal support and troubleshooting 2 4/7
Ergonomi cally designed for PPE operation

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82


Environmental:
IP54, MIL STD 810G: resi stant to blowi ng dust, rain, salt fog, vibration, physical shock

Detection Modes:
Expl osives, narcotics, TICs, CWAs

Operating Temperature: -20°C to 55°C (-4°F to 131°F)

Detector Type: Ion Trap Mobility Spectr ometer; Nickel 63, 10 millicurie (370 MBq) strength
Analysis Time:
Less than 12 seconds
Sample Acquisition:
Parti cle and/or vapor
Warmup Time (initial/daily):
24 hours/30 minutes

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Itemiser - Morpho

Morpho Detection s flexible, lightweight desktop detector simultaneously analyzes both positive and negative
ions, allowing for advanced explosive and narcotic contraband detection.
The Itemiser is the first trace detector in the world to simultaneously detect positive and negative ions, enabling
the detection of a broad range of explosives and narcotics. Detection of both positive and negative ions allows
for effective identification from a single sample. It delivers fast, simultaneous explosives and narcotics detection
in a package that is ergonomic and portable.
Simultaneous Dual-mode Detection
In recent years, the arsenal of explosives used by terrorist groups has expanded beyond the range of substances
easily detected by instruments utilizing traditional Ion Mobility Spectrometry (IMS) technology. Traditional IMS
instruments operate in either positive or negative mode, but not both modes simultaneously.
While negative mode opera tion detects the majority of explosives, certain explosives are detected in positive
mode. Therefore to rule out the presence of all explosives, conventional IMS detectors require operators to
sample and test in one mode, then switch modes and test again.

Easy-to-Use Operator Inter face


Results can require minimal interpretation, so operators may concentrate on obtaining a good sample.
Itemiser s onboard computer automatically handles all data logging, including time, date, and sample analysis
for each alarm. A complete history of saved data and alarm files can be recalled and printed at any time

Sensitivity/Selectivity
Patented ITMS technology helps increase ion population, enabling detection of microscopic traces of
explosives and narcotics Patented switching mechanism simultaneously detects positive and negative ions,
enabling the detection of a broad range of explosives, while also detecting narcotics

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Data Transfer Capability:
Two USB 2.0 ports Ethernet port
Detection Modes : Explosives (optimized negative ion mode)
Narcotics (optimized positive ion mode)
Dual (positive and negative ion mode) for later analysis

Dimensions Itemiser (with display opened)


Height 14.9 in (38 cm)
Display Clearance 16.3 in (41 cm)
Width 18.9 in (48 cm)
Depth 19.8 in (50 cm)
Weight 26.5 lbs (12.02 kg)

Itemiser (with display closed)


Height 7.1 in (18 cm), Width 18.9 in (48 cm), Depth 18.0 in (46 cm)

Handwand
Length 11 in (28 cm)
Diameter 1.1 in (2.8 cm)
Weight 2.3 oz (65 g)
Night Vision Device Igen

Worlds only night scope that takes pictures too!


Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• Captures black and white images on standard secure digital memory card

• Images saved in JPEG & TIFF Format

• Images easily transferred to a computer

• No special software needed

• Ambient light amplification adjustable up to 10,000X

• Variable frame rate (2fps to 30 fps)

• Work s day or night

Thermal Imager Delopt Thermo Plus

Features and Benefits


• New-generation high performance IR detector

• Intuitive detachable touch screen and remote control handle

• High thermal sensitivity and precise temperature measurement

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• High- resolution image presentation

• Real-time radiometric recording and JPEG image storage

• High speed data transfer via USB2.0

• Synchronous video output on VGALCD screen

• OLED view finder, VGAdisplay device &TV display device

• Ultra-large-capacity 2GB SD memory card

• Compact architecture and intuitive touch screen control

• Robust post-processing software

• License free and rapid delivery

Applications

• Predictive and preventative maintenance

• Electricity inspections, Building diagnostics

• Technical diagnostics

• Veterinarian helper

• Portable law enforcement

Specifications

• Temperature Range: Filter 1: -20 °C- +250°C; (Down to -40°C optional)

• Filter 2: 200°C- +600°C (up to +2000°C optional)


Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• Accuracy: Filter 1: ±1°C or±1%of reading;

• Filter 2: ±2°C or±2%of reading

• OperatingTemperature: -20°C- +60°C

• StorageTemperature: -20°C- +60°C

• Humidity: Operating and storing10%to 95%, non- condensing

• Tripod interface: 1/4 20

• Size: 186mm×106mm×83mm(Standard Model)

Bomb Blanket SM Group , CARAPACE

What is a Bomb Blanket?


The Bomb Blanket has been designed for use by both unskilled personn el as well as by skilled Explosive
Ordnance Disposal (EOD) operators when confronted with a suspect explosive device in a public area.
Bomb Blankets are made o f multiple layers of treated KEVLAR fabric and enclosed in a durable, water
resistant, flame retardant nylon cover. Four heavy-du ty nylon webbing loop handles make it easy to
carry the blankets.

Proposal for EO D Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Where can they be used?
Bomb blankets p rovide a portable, flexible, lightweight and multi-purpose means of b allistic
protectio n. These are quite effective against shrapnel and fragments from hand grenade, bombs, IEDs
etc. These are also particularly u seful during d e-mining operations and by bo mb disposal squads. This
blanket is very versatile and can even be adapted to be used as a ballistic blanket during different
modes of operation.

How should a Bomb Blanket be used?


Th e exact method of use of Bomb Blankets varies depending upon the place of use, threat type, size of
the bomb, terrain, etc. One of the suggested ways of use is as following:

• Bomb Blanket, wh ich has four heavy-duty webbing carrying handles, is then carefully placed
surrounding the bomb.
• Th is provides a safe en vironment fo r its examination and disposal.
• Th e damage to personnel or property in the area is thus con siderably reduced.
• It provides prompt and effective method for dealing with suspected packages
• Two or more safety Blankets can be used together to contain larger bomb devices

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H yderabad 82.


Forensic Voice Stress Analyzer

FUNCTION SPECIFICATIO NS COMMENTS


• The FVSA ru ns on Windows XP, Vista & most other operating systems
• The latest computers are used via major leading brands (i.e. Toshiba, Dell,
panasonic etc), with up-to-date advanced hardware available .User friendly
software
• No need for special printer / paper / computer etc.
• No need for attachments to th e subject
• Different test types provided for the Analyst to suit the needs,pertaining to
the subject
• No delay in responses as everything is Real Time
• Sound capturing with a microphone. Can be captured from any source eg:
Digital or Analog recording, Telephone etc Computerized, digital screen
display of the captured response / pattern
• Security of each pattern / file, so it can never be altered
• Screen display and / or printed hard copy of the interv iew (including
patterns and questions)
• Advanced display modes (Sampling Mode One & Two) for easier pattern
displays
• Time saver, with only interviews taking an average of only 45 minutes to
complete

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• A visib le Question Counter showing the number of times a question is
asked. Adding Integrity for the Analyst. Dedicated Template saving mode
TECHNALIFICATIONS COMMENTS
Computer information:
• Intel based CPU, 1.5 to 3.0ghz (Increases with Technology)
• TFT active matrix XGA display (1024 x 768)
• Minimum 40gb Hard Drive (Increases with Technology)
• Minimum 512mb RAM, expandable to 6gb (Increases with technology)
• Optical drive, CD / DVD / CD-RW / DVD-R-RW
• Modem (Data & Fax) V.90 / V.92
• Netwo rk LAN 10 / 100 TX Ethernet
• Diskette Drive
• 2x USB ports
• Optical Mouse (USB) and mouse pad
• AC 97 Software Sounds (Stereo Speakers).Microphon e included
• Battery life up to 4 hours life (Power supply, with 60w worldwide Adapter)
• Windo ws XP or Vista (Plus additional software)
• Weight from only 2.7 kg
• 4 year warranty (Total Replacement )
• Carry case included
• Free Shipping for Initial Orders
• ECURITY SPECIFICATIONS COMMENTS
Security Specifications
• To ensure security from any unauthorized users, ITVT/FVSA
• has included protection internally through the program itself
• and the Operating Sy stem.
• Any tampering from ANY source will possibly cause the
• program to stop work ing and void warran ty.
• Saved files from Interviews are also protected and cannot be
• Tampered with, keeping the Integrity of the Analyst intact.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


SPECIFICATIONS COMMENTS
Training Specifications TRAINING

• Intense 5 day course (Monday to Friday)


• A Diploma as a Certified Analyst will be awarded once the
• Trainee is competent and has passed the final exam. Recertification is
needed every three (3) y ears.
• Course content covered (Manual Supplied)
Maxvision BPAC Biometric Tough Pocket Notebook

FBI CERTIFIED!

Handheld Rugged Computer with Built in Biometrics Feature rich, fully


functional, no-compromise rugged Ultra Mobile Personal Computer (UMPC) for every
industry. MaxVision s BPac uses a rugged aluminum package that fits in a BDU pant
pocket and can collect and process biometric and other relevant in-the-field
information. The BPac includes a 5.6 touch sunlight readable LCD, FIPS 201.1 compliant
fingerprint scanner, Iris camera with IR illuminator, face/barcod e/video camera, GPS,
IEEE 802.11 b & g, Choice of 3G cellular radio (GSM or CDMA), digital voice recorde
co ntact/contactless Smart card reader and easy-to-use biometric software or SDK
support for porting users own application in Windows, all in a handheld package
weighing approximately 3.5 lbs.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H yderabad 82.


Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82


Cobra e Software

CoBRA Software is a design support tool for the full spectrum of CBRNE
incident management. CoBRA software supports national standards
such as NIMS and ICS to quickly establish an incident command
structure and is easily customized to include your own local
procedures, resources and checklists. CoBRA software enhances the
military and civilian first responders ability to identify hazards, isolate
the area, follow the best procedure and organize additional resources

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


CoBRA Command Post:

• Setup a fast and mobile command center in a vehicle or structure

• Stay informed with all incident areas and people

• Utilize all CoBRA software benefits in the field

• Receive electronic reports, track field operations

• Send emergency notifications and updates

• Mak e better decisions with the time you save

• Preplanning, training, exercises and response.

Package Includes

• Latest version o f CoBRA Software prelo aded and a one year CoBRA support
subscription

• Microsoft Windows XP professional / vista capable

• Rugged computer and carrying case

Rugged computer

• 1.83 GHZ Intel Core Du o ( T2400) Processor, FSB 667 MHZ

• 1024 MB, 80GB HDD

• 12.1 outdoor viewable transmissive XGA display comes with built in touch screen
capability

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


BOMB SUIT - Lotus

• The suit consist of the following items, which collectively make a complete
garment :

• (a) Jacket with attached collar.

• (b) Trousers adjustable.

• (c) Breastp late.

• (d) Groin plate.

• (e) Helmet and Visor.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• (f) Neck protector plate.

• (g) Air-cooling blower and charger.

• (h) Transit/carrying bag.

• (i) Integral radio earphones and microphone in helmet (preferably wireless


operation).

• (j) Supersedes.

2. The protection performance figures should be for the Stanag 17 grain (NATO)

• fragment simulator ty pe 2V 50-

• (a) Jacket Front, Ch est - 1800 M/Sec.

• (b) Jacket Front Groin - 1800 M/Sec.

• (c) Sleeves - 560 M/Sec.

• (d) Collar Fron t Centre - 850 M/Sec.

• (e) Collar Side - 600 M/Sec.

• (f) IGP Front - 600 M/Sec.

• (g) Trousers Front Thighs - 690 M/Sec.

• (h) Trousers Front Shines - 620 M/Sec.

• (i) Trouser Knee - 850 M/Sec.

• (j) Bool Cover - 450 M/Sec.

3. The protection matrix consists of : Kevlar, Nomex

• Blend fabric, Nomex thread, Nylon webbing, layered around fibre, etc.
Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Cooling suit :

• (a) The suit is wearable with commercially available equipment.

• (b) Pockets is able to accommodate the power pack and controls.

• (c) The ice reservoir is provided on the back of the suit.

• (d) The cooling suit is designed to offer a safe and cool environment.

• (e) The system is ideally suited for persons involved in bomb disposal &
surveillance operations.

• (f) The cooling system is able to use ice water to remove body heal.

• (g) The suit dose not use hazardous pressurized canister or toxic cooling agents.

• (h) The fabric is made of machine washable, fire retardant kermel.

• (i) Th e suit also offer protection against heat and flesh fireballs.

• (j) The suit Is suitable for use under bomb suits, chemical suits & many other
applications where body heat removal is desirable.

• (k) The kit is self contained , include a long sleeved shirt with cooling on trunk and
arms, long legged pants with cooling on legs, a

• close fitting open faced hood for coo ling of head, a cooling unit and pouch, two
water bottles, battery pack and carrying bag.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Specification of Cooling Suit :

• (a) The heat removal rate is minimum 270 watts (full suit) or better.

• (b) Endurance : min levels to be supported - 45 min at 35 degree C (95 d egree F).

• (c) Cooling Unit Control is operated on a toggle button : On/Off.

• (d) The Pump is operable by a rech argeable battery of 6V/9V.

• (e) The cooling source consist of ice cubes and water.

• (f) The weight of the Cooling Suit and Cooling Unit without ice is max 2.2 kg.

6. The Bomb Suit is made up of the materials shown as under.

(a) The Helmet is made.

• 1. High performance composite material.

• 2. Anti-ballistic visor made from harden ed acrylic/polycarbonate laminate.

• 3. Suspension harness webbing and ballistic nylon.

• 4. Weight with visor not more than 6 kg.

• 5. V50 (helmet) 600 m/s or better.

• 6. V50 (visor) 750 m/s or better.

• 7. Protection for visor while in storage is provided.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


The Blast Plates is made of

• 1. Polycarbonate, steel, foam, ultra high molecular weigh t poly ethylene.

• 2. Weight.

• 3. Suit without up Armor Blast Plates not more than 16 kg.

• 4. Suit with up Armor Blast Plates not more than 30 kg.

• (c) Power Pack : A 12V rechargeable or alkaline power pack is provided with

• the suit, which should have a special pocket to accommodate it

• The power pack has battery status indicator.

• Recharging : mains charger should be provided.

• (d) Search light and mount on helmet is provided.

• (e) The jacket and trouser materials are as specified below :

• 1. Outer cover Nomex / Nomex Blend Fabric, Nomex Thread.

• 2. Protective inserts soft components : Layered Aramid Fibre, contained in


water repellent nylon.

• 3. Colour Olive Drab.

• (f) The Cooling Suit Material is:-

• 1. Germent Kermel.

• 2. Sizing Small 150-175 cm; 40-70 kg, Medium 170-185 cm; 70-85 kg,

• Large 175-193 cm; 85-110 kg.

• 3. Compatibility should be able to be worn next to skin under any clothing.


Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• 4. A second water/ice bottle should be supplied for stand by.

• 7. Ballistic EOD helmet with fan and canister configuration :

• (a) The EOD helmet is made from a sand wich construction system & adjustable by
means of a three/four point suspension.

• (b) The helmet is provided with a facility for a communication set consisting of
two headphones with one microphone and extension lead for attachment to any
VHF/UHF radio transceiver. It should have auto gain controller to protect the ear
drum.

• (c) The helmet has an air ventilation system, which directs the flow of, forced
fresh air over the top of the helmet liner, across the visor

• and down over the operator s face ensuring efficient demisting and clear view
with adjustable air flow.

• (d) The system is able to be used in conjunction with a canister (NBC)


configuration.

• Ventilation and Demisting :

• (a) A helmet mount fan has a capacity 100 litres/min.

• (b) The controls are ( preferably _ on the hand for easy operation with variable
speed.

• 9. Communications : The helmet has built in speaker and microphone. An external


socket is be provided for connection a wireless or hardwire system.

• 10. The following features are optional :

• (a) Wireless Duplex hand held radios (two) VHF/UHF.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• (b) Hardwire A 100 m range.

• Jacket

• (a) The jacket is a long sleeved, side opening design filled with flexible Kevlar
Ballistics.

• (b) Provision is made on the front for the attachment of rigid chest and groin blast
plates b y means of integral packets with webbing and Velcro securing straps.

• (c) Pouches for working tools, air b lower and radio is attached to the front and
back of outer cover.

• (d) Immediate removal of the jack et is achieved by use of the quick release straps
attached to the side and shoulder.

• Trousers :

• (a) The trousers has fully adjustable supporting braces an d wide Velcro waistband
catering fo r small, medium and large sizes.

• (b) The rear of the legs have a full length Velcro strip/Brass Zipper which is used in
co njuction with the retaining strap to fix articulated flexible armour in position.

• (c) The ov er boots is changeable and is held in position by Velcro, leather and
webbing straps.

• 13. Misc. following is supplied along with the equipment :

• Cleaning kit.

• (b) SMT (Special Maint Tools).

• (c) Training aggregate charts, slides, trg brochure, trg work model, blow up
diagram, video films etc.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• (d) Physical Training

• (e) Proof schedule to include details of testing and acceptance criteria.

• (f) Technical Manual giving full description of the item.

• (g) User s Hand Book.

• (h) Literature on preservation/maint.

• (i) Specification for packing, handling/transportation/storage.


(j) Details regarding periodical inspection by the user .

Radar Safe procedure (RSP) Tool Kit

• All in two suitcase TOOLS for immediate major operation on an improvised


Explosive Device. It is an ideal Bomb Technicians tool kit. Tools have been
assembled after detailed study of all kind of requirements of Bomb
Technicians when handling a Bomb . All tools high quality/ ISI marked .
Cleaning kit provided.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Fully Meeting MHA Specifications

• 1. Doctors Stethoscope : 01pc

• 2. BP Handle 6 + 1 with BP Blade set : 01pc

• 3. Scissors 6 , 7 , 8 : 01(each)

• 4. Den al Mirrors Length 6 +1, 10 +1 Mirror Dia:0.75 +0.25 : 01(each)

• 5. Scalpel Length : 8 : 01

• 6. Artery Forceps Length: 6 , 7 , 8 , 9 : 01(each)

• 7. LED Torch with two pencil cells (1 LED Spare incorporated in Torch). : 01

• 8. Torch medium with two cells with Krypton Lamps (1Spare Lamp
incorporated in Torch), : 01

• 9. Hammer sledge (2 Kg), ball peen, claw Hammer : 01(each)

• 10. Pipe wrench 10 : 01

• 11. Hand vice Grip 6 : 01

• 12. Magnifying Glass : 01

• 13. Nipper cutter : 01

• 14. Tin cutter : 01

• 15. Nose pliers : 01

• 16. Stainless Steel Knife 80mm Blade : 01

• 17. C Clamp 4 , 6 , 12 : 01(each)

• 18. Spanner Adjustable 15+5, 30+5 mm : 01(each)


Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• 19. Hack saw 6 with Blade set. : 01

• 20. One Screw Driver set consisting of- : 01

• a. Flat 2 +1, 4+1, 6+1, 8+1, 10+1 mm blade width : 01(each)

• b. Flat offset 6+1, 7+1, 10+1 mm Blade width. : 01(each)

• C. Cross point 150+5, 200+5, 250+5, 75+5 mm : 01(each)

• 21. Hand drill with drill bit set. : 01

• 22. Spanner 10 piece metric set. : 01

• 23. Spanner 10 piece imperial set. : 01

• 24. Soldering iron 6 with soldering flux & solder wire 50 gms. : 01

• 25. Sponge holder 10 : 01

• 26. Can opener 6 : 01

• 27. Tape Packaging 3 /50m and Electric Insulation Tape : 01

• 28. Duct Tape 3 /50m : 01

• 29. Nylon Strapping Tape 1 /50 : 01

• 30. Punch 5 : 01

• 31. Cold chisel 6 : 01

• 32. Cold chisel 8 : 01

• 33. Screw driver set (watch maker) : 01

• 34. Screw driver alignment : 01

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• 35. Super glue adhesive : 01

• 36. Pliers cutter with grip long point nose : 01

• 37. Pliers cutter / grip combination : 01

• 38. Pliers flat jaw : 01

• 39. Pliers round jaw : 01

• 40. Cutter side 120+5, 150+5 mm : 01(each)

• 41. Fish line (50m) with hook (various sizes) : 01(each)

• 42. Tweezers 6 : 01

• 43. Probe (Straight & angular) : 01

• 44. Wire brush : 01

• 45. EOD multitool with crimp er (Material High Strength Aluminum)

• 46. Tape measuring 4+1 mtr. : 01

• 47. Non Metallic probe : 01

• 48. Kevlar hand gloves : 01

• 49. CO2 Portable Fire extinguisher 600 gm. : 01

• 50. Bar lever spike & cranked chisel ends 445 mm : 01

• 51. Bar lever cranked form & wedge ends 260 mm : 01

• 52. Square driver socket set. : 01

• 53. Pick 560 mm head : 01

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• 54. Pry bar : 01

• 55. Hand Held Self Ignited Propane Gas Torch : 01

• 56. Plastic tweezers 6 : 01

• 57. Scriber double ended : 01

• 58. Glass Cutter : 01

• 59. Measuring tape spool -30m : 01

• 60. Brush Pain ting Nylon Bristles -1 ,2 , 4 : 01(each)

• 61. Tin/sheet metal Snips / cutter 2.5 blade : 01

• 62. Nylon cord 0.04 / 30m : 01

• 63. Plastic knife 6 blade : 01

• 64. Knitting needle plastic : 01

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


REAL TIME VIEWING SYSTEM (RTVS):
• The Real Time Viewing System should be lightweight. The
system shall be compact and easy to set up.

• All compo nentssh all be portable.

• The system shall be able to function with both pulsed and


continuous X-ray source.

• Real time measurement of any object on screen shall be


possible.

• The system shall have a laptop based control and display unit
along with a compatible video camera unit.

• X-Ray generator shall be light in weight and capable of being


operated remotely.

• The RTVS should be mountable/ suspendable from the ROV and


Mini ROV and the mounts shall be included in the equipment.

• To facilitate the offsite study, the system shall be supported by


a hardware and software capable of image recording o n a
storage media i.e. CD, Pen Drive etc.

• The software shall be menu driven and shall facilitate the


operato r to choose from the wide range of functions provided
by the software.

• The software shall have the facility of zooming the image along
with the ability to scroll the full image (200 to 400%).

• The system shall b e able to store minimum 1000 images in its

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


database library with the capability of annotation.

• The software shall provide image enhancement facilities as


under:

(a) Polarity and pseudo coloring facility

(b ) Brightness & contrast control

(c) Split screen capability

(d) Sharpening of images

(e) 3D effect of image

(f) Tilting/rotation of an image

(g) On screen measurement facility (both inches and mm)

(h) Overlay capability should be supported

(i) Multiple undo/redo and restore original function s

• The system shall have an option for wireless operation.

• For easy field u se, the system shall be op rated with


rechargeable battery and should also have facility of operating
with AC power supply.

• The system shall have a battery low-level indicator.

• The system should have anti-virus software to protect stored


data.

• The system shall be capable of operating in the temperature


range of -50C to +500C.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


• Exposure time for X-ray (1-99 pulses or better) shall be
adjustable depending on type of object to be viewed o n X-ray
and these controls shall be available in the software as well as
X-ray generator. Accumulation of pulses on Image Capture Unit
should be possible.

• The laptop should be configured with the latest version of


software.

• Audio and visual warning during the X-ray activation shall be


available.

• Image Capture Unit (ICU) should be available in different sizes


i.e. small/ medium/ large (ranging from 150mm to 330mm x
110mm to 440mm).

• All types of accessories and consumable items required for


functioning of the equipment shall be easily available in the
market.

• The laptop should be of standard make and have following


minimum specifications or as specified by purchaser.

(a) Screen at least 14 TFT with 1366 x 768 resolution

(b) Processor: Intel dual core, 2.20 GHz or Higher with 2 MB Cache.

(c) Hard Disk: 320 GB or Higher

(d) Drives: DVD, CD R/W or higher, Card Slot, USB 2.0 slots x 2

(e) Operating System: Windows XP Professional o r later version.

(f) Visual Database : Storage capacity of at least 10,000 images

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


including data, user name, date, time, category, place, filename, project
name, type of ICU, type of X- ray and description, capability for backup and
restore the database, quick save an d project functions.

(g) Split screen with synchronized scrolling capabilities.

(h) Built in email access.

(i) Audible and visual warning during X-ray activation, incorrect setup.

• Original Equipment Manufacturer o r their authorized


distributors should be able to provide the following as
applicable along with the equipment

(a) Technical Manual giving full description of the item.

(b) User s Hand Book.

(c) Literature on preservation technique, as applicable.

(d) Specification for packing, handling/transportation/storage.

(e) Details regarding proof/ periodical inspection by the user.

• Real Time Viewing System with accessories should be packed in


a pelican casewith wheels and the equipment should fit into
space provided inside.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


CAR REMOTE TOOL OPENING TOOL KIT:
• Car remote tool opening tool kit shall consist of following
minimum equipments:

• Vice grip pliers with ring (25 mm/Max.jaw gap 115 mm) 01

• Hook single (50 mm gap ) 01

• S hook (25 mm gap) 01

• Hook single with ring (25 mm) 01

• Hook double with ring (50mm) 01

• Ring Large (50 mm) 01

• Ring small (25 mm) 01

• Bonnet cover opener 01

• Trunk lid opener screw clamp 01

• Door opener all types of cars 01

• Door opener clamp all types of cars/remote window breaker 01

• Door handle lifter 01

• Door button p usher 01

• Multi purpose clamp 01

• Ignition key holder screw type 01

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• Ignition key holder with magnet 01

• Key /handle clamp 02

• Spring clip hook double with ring (50 mm) 01

• Spring clip with ring (25 mm) 01

• Triangular wind ow opener 01

• Rope nylon 2 mm dia, 10m (200 kg load ) 01

• Rope nylon 2 mm dia, 15m (200 kg load ) 01

• Rope nylon 6 mm dia, 30m with hook (600 kg load) 01

• Stand held lifting assembly 01

• Pulley snatch (strength 400 kg) 04

• Hub cup opener with ring 01

• Screw driver set 01

• Double end spanner set (5/7 to 22/27) 01

• Rivet opener screw type x 01 and rivet opener punch type 01

• Hammer ball pane/claw 01

• Cutter knife 01

• Special lead for self starter 01

• Pliers side cutting 01

• Karabiner type hook 23 mm/2700 kg 01

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• Special clamp for bonnet cover opener with vice grip pliers 01

• Suction pad anchors 01

• Self adhesive anchors 05

• Telescopic tripod with top eye (capacity 750 kg) having overall
01 height at least 2000 mm, steel anchor pegs for stability,
minimum pitch circle diameter of 2000 mm at maximum
extension.

• Pelican Carrying Case with rubberized foam insets to 01


accommodate the tools.

• Original Equipment Manufacturer o r their authorized


distributors should be able to provide the following as
applicable along with the equipment

(a) Cleaning kit, if any.

(b) Technical Manual giving full description of the items (including


parts catalogue where applicable).

(c) User s Hand Book

(d) Literature on preservation technique as applicable.

(e) Details regarding proof/periodical inspection by the user.

(f) Spares and tool kit where applicable.

(g) Operator training/demon stration

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


DRILLING MACHINE:
• Motor of drilling machine should b e DC operated having voltage range of 6 volts

to 24 volts. The drill should be supplied with two batteries, a battery charger

with charging, full charged & low battery indications.

• It should have hammer drill 10 mm with rubber hand grip.

• Drilling machine should have minimum dual speed settings, 0-300/450 and 0-

1100/1500 RPM.

• Drilling machine should be of compact size and light weight allowing user to get

into tight spaces while performing application s.

Weight should not more than 2.7 kg

• Power consumption should be less than 400 W.

• It should also operate with AC supply.

• Total numbers of bits should be10 (preferably double ended) with one set and

kit b ox.

• Power should be at least 450 lbs of max torque.

• Drilling:

(a) Chuck Single sleeve key less ratchet chuck, at least 15 chuck setting, chuck

size 3/8 1/2 .

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


(b) Drilling ability

(i) Up to 20 mm diameter in concrete

(ii) Up to 10 mm diameter in steel

(iii) Up to 20 mm diameter in wood.

• Firm should be able to provide the following as applicable, along with the

equipment

(a) Cleaning kit

(b) MRLS (Manufacturer Recommended List of Spares)

(c) Technical documentation

(d) Technical manual giving full description of the item.

(e) User Hand Book

(f) Specification for packing, handling/transportation/storage

(g) Details regarding proof/periodical inspection by the user

Thermal Cutter
• The Thermal cutter shall be employed in situations where entry hole is to
Be made on the IED to gain access to the contents. The typical use of this
equipment would be against soft skinned IED containers like plastic, rexene,

cloth, etc. The aim is to melt the outer surface b y employing heat on the skin of

these containers thereby removing a triangular section creating an opening.

• The equipment should have quick heating and should achieve its peak

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


temperature in less than 10 minutes.

• The edges of the tools should be thin and sharp.

• It should be able to cut the plastic materials of thick ness of minimum 5 mm. For
this, it should be able to attain at least a minimum of 5000 C.

• The equipment should have a heating element head in the shape of


equilateral triangle of 4 size.

• It should be operable with both AC and DC.

• It should be provided with a light weight stand which can be positioned in


3600 sphere. The stand should be modular in design and should have a
maximum height of 6 ft.

• The cutter should be remotely operable, The equipment should be


compatible ROVs and should have fitments in the stand for this purpose.

• The equipment should be supplied packed in pelican carrying case with


insets in rubberized foam.

• Firm should be able to provide the following as applicable, along with the
equipment

• (a) Technical manual giving full description of the item.

• (b) User s Hand Book

• (c) Literature on preservation technique, if applicable

• (d) Specification for packing, handling/transportation/storage

• (e) Details regarding proof/periodical inspection by the user

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


WATER JET DISRUPTOR:
• It should be capable of performing both to disarm and to disrupt.

• It should have recoilless operation.

• It should have capability of stand-off operation.

• The mounting should be stable and should permit movement of the disrupter in

all angles.

• It should have flexibility in selection of velocities of low and high velocity


jets.

• It should have an aiming device for stand-off operation with laser and
telescopic sights.

• It should be light weight and not more 15 kgs.

• Its operating temperature should be -50C + 550C.

• Its body should be of metallic rust proof material.

• It should be capable of firing at least following projectiles:

(a) Blade projectile

(b) Bloster projectile

(c) Chisel projectile

(d) Fin/Spin projectile

(e) Fork projectile

• Accessories:

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


(a) Operators Manual

(b) Carrying Case with harness

(c) Training material/aid

HOOK AND LINE SET


• Essential Qualitative Requirement:

• It should be capable of being launched by a man portable launcher/crossbow so

as to achieve range up to 100 meters.

• It should have pull setting for various ranges on the launcher.

• The launcher should have an accuracy of 45 cm radius at the target end.

• It should have 60 ropes. The qualitative requirement for the ropes shall be as

follows:

a. Type of Rope -Nylon

b. Length of Rope -75 meters.

c. Weight of Rope -1.7 Kg to 1.8 Kg. (23 - 25 gms per meter)

• The book/prong should preferably be light and sturdy so as to sustain repeated

blast of launch and at least 50 impacts at target end.

• It should have 12 numbers of hook/prongs with the set.

• It should be used friendly .

• It should be made of non-reflective material.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• Total weight of launcher with one projectile should not exceed 4 K gs.

• Preferable Qualitative Requirements:

• Noise level during operation should be low.

• It should have a sight system with graticulam for various ranges.

• It should have optical and open sights.

PORTABLE GENERATOR
Portable single phase 220V 50 Hz. Petrol start, Kerosene run AC generating set

• Rated VA output Starting Type AC/DC output


• (at unity pf)
• Starting Type: Recoil
• AC/DC Output: AC and 12V, 6 Amp. min DC

Schedule : Portable AC Generating set 220 Volts, 50 Hz Petrol start, Kerosene run
co mprising of air cooled 4 stroke single cylinder engine and alternator. The Gen
set should have low lubricating oil alert system. The Generating set shall be fitted
with fuel tank of a capacity to give continuous operation for minimum 5 hours at
rated full load an d fuel should not spill out of the lid of the tank due to the
vibration. In case of electric start Generating Sets shall have maintenance free
battery and battery charger with suitable starter.

General Technical specifications

1. Portable Gen. Sets shall meet the requirements of the provision of environmental
protection rule 1986 vide notification No.GSR 742(E) dt.17.05.2002 and SL. No. 91
dt. 25.09.2000 and its amendment vide GSR No.628(E) dt.30.08.2001 In respect of
noise level norms and Provision of Environment protection Rule 1999 for

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


emission Standard for Generator set as per rule 88 (B) effective from 01.06.2001
vide notification No.GSR 682 (E) dt.05.10.1999 issued by Min. of Environment &
Forest, Govt. of India.

2. Gen. Set shall be capable to operate satisfactorily under the following site
conditions:

i) Altitude: Height above sea level not exceeding 1000 meters.

ii) Ambient temp.: Ambient temp. at operating site does not exceed 40
degree C.

iii) At other site conditions derating shall apply as per IS:7347-1974 with amdt.
No 1 &2(reaffirmed 2006).

NOTE:-The firm shall establish through calculation that the Gen. Sets are suitable for the
worst condition, mentioned above .

3. For Electric Start Genset :

a) The battery and battery charging unit o f suitable rating should be provided, duly
mounted on Gen. set.

b) Motor Starter of suitable rating shall be provided.

c) The tenderers shall justify the compatibility of battery ratings and motor starters
with the respective engines.

d) The Battery shall be maintenance free.

NOTE:-Firm shall furnish the calculation for the suitability of the battery rating for each
model/ rating of Gen. Sets.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


4. The Genset shall meet the requirement of Duty Type S1 (Continuous running duty
)as per IS:12824/1989 (reaffirmed 2004).

5. The Winding temperature rise of the Alternator at rated load shall meet the
requirements of IS 4722:2001.

6. The windings of the Alternator sh all withstand the Dielectric test and Insulation
Resistance test as per IS 4722/2001(Re affirmed 2006).

7. The generator shall be fuel efficient and shall give specific fuel con sumption
measured at rated load and frequency as under:

a) Up to Rated output of 1 KVA ------1150 gms /KVA/Hr(max.).

b) Above Rated output of 1 KVA ---- 900 gms / KVA/Hr(max.).

8. The Voltage output shall be maintained within 220V +/-6% and frequency at 50
+/-1 Hz at rated load. The voltage regulation from No load to fu ll load shall be
within 15%.

9. All electric (self start) Gen sets shall have in built recoil system to start the engine
in case of battery discharge.

10. Suppliers shall furnish the type test certificates of the Engine and Alternators and
inspection, from any Gov t. laboratory. And the requirements given in clause 4 to
8 of GTR

11. The suppliers shall have adequate testing facilities for all the tests as per cl. 4 to 9
of General Technical Requirements, and will demonstrate the tests during
inspection.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Non Linear Junction Detector :

A Non Linear Junction Detector may be used to identify:

Active or Live Bugs


Inactive Bugs
Turned On Bugs
Turned Off Bugs
Burned Out Bugs
Dead Bugs
Covert or Concealed Video Cameras
Microwave Transmitters
Remote Control or Remote Powered Bugs
Resonant Cavity Dev ices
Concealed Cellular, PCS, and GSM Telephones
Electronic Timers for Hidden Bombs
Wireless Microphones
Hidden Tape Recorders (even broken o nes)
Covert Eavesdropping Devices

Proposal for EO D Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


A Non Linear Junction Detector is nothing more than an instrument which detects
harmonic anomalies, nothing more. Any positive indication must be verified with
a metal detector, X-Ray examination, thermal viewer, and a physical inspection to
confirm the actual presence or absence of an eavesdropping device. While the
NLJD is not a "magic wand" it is much less destructive then a sledgehammer and a
number 14 screen
Deep Search Metal Detector
Our micro controller based DSMD / mine detector is based on pulse
induction technology, which is most suitable for deep
penetration underground search. The product has unique
features, parameters that exploits the inherent advantages of
pulse introduction technique to fullest user friendly menu
driven operator interface, making it easy to use in the field with
minimal operator training.

Sailient featutres

• Micro controller based


• Detect small metal near large metal
• Detects both ferrous / non ferrous metal under ground in
water through bricks walls etc
• Deep penetration range upto 5 ft or large object
• IP67 Grade
• Operates on dry battery
• Convenient packing for easy portability

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


• Rough & tough to use
• Suitable for under water operation
• Light weight
• Canvas carrying case for field operation
• Rugged metallic case for transportation
Specifications:
• Detection principle pulse indication
• Control unit aluminium box 220X 120X45 mm
• Search coil Oval shape 8 X 10
• Telescopic Rod: min 700 mm , max 1700 mm
• Power 1.5v x 8 Nos dry cells
• Operating temperature - -20 deg C to +55 Deg C
• Humidity 95% RH Non condensing
Indications
• Audio : variable audio to indicate size of metal detected
and depth at which metal detected> head phone
provided.
• Visual: LED s for ON/Metal/ Low Bty/ Mode/ Coil
connectivity
• Carrying case: canvas carrying case for field use.
• Packing & Storage Light weight aluminium box with
cushioning

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Swat Boots FR Dungaree:
Specifications
Full Grain leather Toe, durability uniform code, polishable,

1000 denier nylon, highly breathable,

Slip resistant, oil resistant logo outside,

Compression molded orthotic footbed, allows for custom fit,

To ugh and durable moisture wicking lining, comfort, moisture away from feet

Riveted steel shank sand witched between 2 flexible lasting boards, Torsional strength

Hot metal heel cou nter, retains boots shape, holds foot in place

Arch ladder tread, special design for extra grip on the rope rappel,

Rust proof hard ware, Rear h eel kick plate

Endoscope

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


GE Digital Energy UPS

General data
Topology VFI, on line double conversion
Nominal output rating 6000/4200 10000/7000
(kVA/kW)
Overall efficiency at nominal 92%
load (%)
Heat dissipation at nominal 365 609
load (W)

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Cooling air (m3/s) 100
Audible noise level (dB(A)) <55 (load and temperature dependent)
Operating temperature range 0-40 (15-25 recommended for batteries)
(°C)
Relative humidity 90% (non condensing)
Protection degree IP20
Safety IEC/EN 62040-1-1
EMC IEC/EN 62040 -2 Category C2 (Class A)
Surge capacity IEC/EN 61000-4-5, Level 4, 2kV line-line / 4kV line-earth
Electrostatic discharge IEC/EN 61000-4-2, Level 4, 8kV contact / 15kV air
immunity discharge
Colour RAL 9005 (black)
Input converter
Nominal AC input voltage (V) 230
Input Voltage Range (V) 175-276 (84-276 for load <30%)
Minimum Start-up voltage (V) 176
Input Frequency Range (Hz) 40-70
Power factor >0.97
Nominal input current (A) 20.6 34.6
Inrush current (A) 60
Input current waveform sinusoidal
THDi (%) <5 (full load)
Output converter (inverter)
Power factor 0.7
Nominal AC output voltage (V) 220 / 230 / 240 (selectable)
Output voltage tolerance (%) ± 2% (static)

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Recovery Time (ms) 50
Output frequency (Hz) 50 / 60 (selectable)
Output frequency tolerance (%) ± 0.1 Hz (on battery)
Output current waveform sinusoidal
THDu (%) < 3% with linear load, < 5% with non linear full
load
Crest factor handling 3:1
Overload capability 125% 1min, 150% 10 s, >150% <2s
Short circuit capability (A) 110 160
Bypass
Bypass voltage range (V) ± 10% no minal
Frequency slew rate (Hz/s) 1
Frequency track ing range ± 5% selected
Transfer Time (ms) 0.5 typ
Overload capacity Depending on thermal circuit breaker
characteristic but typically:
125% TC B size for 50-700s
200%TCB size for 10-150s
300% TCB size for 3-40s
Battery type* sealed lead acid mainten ance free, 5 years lifetime
Capacity (Ah)* 8
Nr. of blocks 20
Standard backup time at nominal 12 5
loads (mins)
End o f discharging voltage 1.66
(Vdc/cell)
Recharging current (Adc) 1.2

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Recharge Time 5 hrs to 90% of capacity

Controls, signals and alarms


Front Rear
On / Off Push buttons Input circuit break er
Buzzer (resettable) Output circuit breaker
Alarm led (red) Input/Output terminals
Runtime led bar Output socket(s)
Load level led bar DC connector for batteries
4 Statu s led: - Mains present RS232 communication port
- On battery Parallel Board
- UPS on Remote Power Off Contact (RPO)
- On bypass SNMP Card* plug
*option

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Personal protective Equipment
BP Helmet - IA :
The Indian armour PASGT Helmets ( US Personal Armour System ground Troops) Helmet is
designed to protect against fragments / shrapnel and other ballistic threats with improved
comfort. Used by special forces, police, military, an d swat teams

Feautures: High b allistic performance with low weight usin g high tenacity ballistic aramid fiber.
Unique processing method and perfect fit suspension system

Suspension systems

3 different suspension systems

All have a 4 point chin strap harness, with an integrated nape pad

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H Hyderabad 82.


Crown mesh crown mesh with cross straps with plastic chin cup

Leather ring shock absorption harness, with leather webbing and leather split chin strap

Pad : 7 EVA foam pad s with webbing split chin strap

Bomb Basket SM Group

• Bomb basket shall be made of non-fragmentation ballistic composite material

wit h a minimum of 24 diameter and 36 height.

• It shall have a nylon holding net suspended inside the basket to hold the IED in

upright position. It should have facility for easy removal/placement.

• It shall withstand a blast of 200 gm of RDX with one detonator or equivalent

high explosive and high explosive with splinters and shall not have major

delimitation and penetration.

• Its weight should be less than 50 kgs.


• Provision of detachable base plate shall be provided.
• Marking of datum points on the exterior of t he basket shall be provided to allow

X-rays to be taken at specific points.

• Facility of rolling the basket without damaging its exterior (Rubber Rings) shall

be available.

• Glowing colour shall be provided for clear visibility to all personnel (red/orange).
• Original Equipment Manufacturer or their authorized distributors should be able

to provide the f ollowing as applicable along with the equipment

(a) Technical Manual giving full description of the item.

(b) User s Hand Book.

(c) Literature on preservation technique, as applicable.

(d) Specification for packing, handling/transportation/ storage.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


(e) Details regarding proof/periodical inspection by the user.

RSDL Chemical Wipes

The only skin decontamination lotion


Designed to be carried by war fighters & first responders world wide
Tested & Proven effective by the US DOD & Multiple NATO militaries
Cleared as SAFE by the US FDA, European CE and Australian TGA
Decontaminates ALL known chemical warfare agents in < 2 mins
Leaves a Non toxic residue on the skin
Fielded by the US & NATO Militaries
Individual & Multi packets available

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Proposal for EOD Vehi cle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H yderabad 82.


Optional Accessories in order to make EOD
vehicle into NBC Cruiser
Street Lab Mobile - Morpho

Identify Chemical and Biological Threats with One Fast, Rugged Tool
Built to quickly and accurately identify threats in the field, Morpho Detection s Street Lab® Mobile delivers
breakthrough 2-in-1 chemical and biological identification capabilities in a go-anywhere, user-friendly handheld
unit. Street Lab Mobile can identify chemical and biological substances in a wide range of environments using
Raman spectroscopy. Rugged, yet ergonomic and lightweight, Street Lab Mobile reliably identifies liquids,
powders, and solids without subjective interpretation.
Flexibility in the Field
Designed with input from the hazmat community, Street Lab Mobile is ergonomically optimized for ease-of-use
in Level A gear, with large buttons, simple on-board LCD screen readouts, joystick function and pointand-
shoot one-handed operation. Made of highly durable and fully decontaminable LEXAN®, it s ready to perform
in the most challenging environments even in the hot zone.
Benefits
Single unit detects chemical (including explosives and drugs) and biological threats using Raman technology
Water tight and toughened to IP67 ratings for extreme conditions and dunkable
Decontamination
Wireless remote operation with up to 500m range line of sight
One-hand operation for true hot zone use in Level A gear
Simple and clear substance identification of solids, liquids and powders

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Breakthrough 2-in-1 Technology
Street Lab Mobile identifies both chemical and biological substances using Raman spectroscopy, which permits
samples to be analyzed with lasers and can be used to identify a wide range of substances including toxic
industrial chemicals, explosives, narcotics and biologicals. Results are clear, repeatable and completed with
minimal operator interaction.
Chemical Identification using Raman
Direct Measurement evaluates the molecular activities of chemicals
Analyzes frequency shifts in laser light as it scatters off a sample to identify sample s unique spectral
fingerprint
Recognizes substances in the bulk phase Raman spectrum effective only with substances tha t have a Ra man
spectrum
Versatile
Identifies broad range of substances, i.e., toxic industrial chemicals (TICs), toxic industrial materials (TIMs),
explosives, chemical warfare agents (CWAs), narcotics, precursors, white powders and biological pathogens
Samples chemicals through glass, plastic, transparent and even some translucent materials
Analyzes pills, powders, liquids and solids
Fast
No sample preparation required for chemical identification
Chemical identification results: < 2 minute analysis for most compounds
Biological identification results: a. Initial test results: sample preparation 15 minutes; analysis time: 3 minutes
b. Parallel processing enables subsequent test results every 3 minutes
Accurate
Rapid automated calibration to ensure operational accuracy
Minimal sample preparation and test interpretation minimizes human error
Standardized libraries provide precise results
Reliable pathogen-antibody binding ensures MDI s unique SERS Tags enable consistent biological identification
results
Sample/Process
Automatically saves test results, preventing intentional or accidental modification or deletions
Integrated sample vial holder allows for added sampling flexibility
Non-destructive chemical testing preserves samples for additional test and/or for use as evidence
Requires limited biological sample material

Rugged, Go-Anywhere Design


Large buttons, trigger activation and joystick enables operation in Level A gear
LEXAN® EXL fabrication with rubber molding for strength, durability and resistance to corrosive chemicals
Submersible for full post-use decontamination, meets IP67 rating
Extended Wireless Capability
Remote control operation to safely interrogate samples from a distance
Transmit results quickly to remote computer
Maximized urban line-of-sight: ~1,500 ft (500 m)

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Ground Penetrating Radar ( Can be used in EOD also)

SYSTEM ADVANTAGES:
TIME RANGE : user selected from 1 ns to 2000 ns with 1 ns step
SCAN RATE : 80 scans per second for DOUBLE CHANNEL, 56 scans per second for
SINGLE CHANNEL
RESOLUTION: 16 bit
GAIN:up to 10 points digital function
DATA TRANSFER: through Ethernet
DATA ACQUISITION: in original shape
DATA OUTPUT: colored
ACCESSORIES: Battery 12 V @ 3.2 A*h, Shoulder bag, Charger,
Power cable, 3 & 20 m antenna cables, Straps, Spare fuses, Strong case
WEIGHT: 2 k g to 7 kg (depends on frequency)
POWER:0.35 A @ 12 V DC by cable from control unit
TRANSMITTER OUTPUT: 200 V
RECEIVER SENSITIVITY: 50 mV
PERFORMANCE: separated transmitting and receiving
DIMENSION: 93x65x21 cm each WEIGHT: 13 kg each
POWER:0.35 A @ 12 V DC by cable from control unit
TRANSMITTER OUTPUT: 400 V
RECEIVER SENSITIVITY : 50 mV

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H derabad 82.


DATA COLLEC TION:
Colored or grayscale acquisition mode
Continuos profile or stepped mode
Digital gain function applying
Record of current coordinates from GPS receiver
Distance measurement from wheel
DISPLAY M ODE:
- user selected colour or grey scale line scan, wiggle plot
- integrated multi-windows environment
- user-friendly interface
- different data formats: SEG-Y, RadSys, GSSI
- spectra calculations
- output to printer supported by Windows
- velocities and depth evaluation via diffracting options
- 10 point digital gain function
- path finder tool for GPS coordinates
- stepped Zoom In & Zoom Out
Idaho Biological detector

RAZOR EX System

The RAZOR EX system detects and identifies


biological agents using cutting edge technology.
Made for field use, the RAZOR EX is compact,
lightweight, and easy to use. It is a field PCR unit
that is fast, with ultra-reliable DNA based
results. Created for first responders and front
line military troops, it is easily operated while
working in protective equipment under extreme
conditions. The new battery powered unit
includes Bluetooth capabilities, bar code reader,
and a bright, easy to read color screen. The
RAZOR EX uses Idaho Technology's patented pouch system integrated freeze-dried
reagents and special packaging for incomparable ease o f use. Idaho Technology has a

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


selection o f pre-formatted pouch configurations for the most common bioterror threats
as well as the ability to custom formulate the pouches for individual needs.

Ben efits from a Complete Product Solution

Instrument Chemistry

Simultaneously tests up to 12 real time


PCR samples Freeze-dried reagents; just add samplewater
and

Works in roughly 30 minutes Validated for sensitivity and specificity on


the RAZ OR EX System
Support Software

Obtain quick assistance through phone


and online help desks Simple wizard-based user interface

Approved product for Homeland Security Automated qualitativ e analysis and text
delineated exportable data

User Interface - Internal calibration and


diagnostics ensure the instrument is functioning
within tolerances before and during operation.
Automatic analysis software runs on-the-fly, with
raw data and software analysis presented
simultaneously.

• Designed for use in personal


protective equipment.
• Large intuitive push-buttons
• Bright Color screen
• Bar code reader for protocol and pouch
information uploads

Desktop Software

Proposal for EO D Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


The software is an additional tool to expand the
stand-alone RAZ OR EX capabilities to aid in post-
mission support and reachback.

Software features include:

• After incident data analysis


• Data archiving
• Report function

RAZOR EX System and Computer Specifications

The RAZOR system can test for the following targets

Hazmat Anthr ax, Brucella spp, Botulism A, Coxiella, E. coli 0157, Tularemia,
Ricin, Salmonella, Smallpox, and Plague
Food Safety Campylobac ter, L. monocytogenes, and Salmonella

Water Safety Cryptosporidium T arget 1, E. coli 0157, and Salmonella

Instrument Specifications
Size (w x d x h) 10" (25.4 cm) x 4.5" (11.4 cm) x 7.5" (19 cm)
Weight 11 lb / 4.9 kg
Instrument Power Supply Rechargeable battery pack inc luded with instrument
External Power Supply 24 V DC, 4 A Output, 110 220 V AC

Performance Parameters Instrument set-up time 5 minutes


Sample run time 30 minutes (average)

Proposal for EO D Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


Lower Heater: 56 °C to 64 °C / Upper Heater : 86 °C to 94 °C
Temperatur e Control Uniformity: 0.5 °C in single sample Intersample / 1.0 °C across
sample area Intersample
One-color optics modules
Excitation wavelength 470 ± 20 nm
Fluorescence Acquisition
Emission wavelength 530 ± 10 nm TaqMan®
Emission wavelength 690 ± 60 nm HybProbe
Certifications CE, CSA

Software and Training


RAZOR EX Windows® XP application, downloads data for real-time offline analysis,
Software intuitive navigation and after action reports.
The system comes with a training DVD with all the necessary multimedia
Training tools for sampling, pouch loading, machine operation, maintenance, and
software.
Portable Air Filter Cabinets - Respirex

A high visibility, robust, portable cabinet with a wide base for stability, a clear
polycarb onate front panel and a three stage filter system with four air supply outlets.
The cabinets are manufactured in lightweight Medium Density Polyethylene with a clear
polycarb onate front
panel complete with a sealing gasket which is easily remov able for servicing the filter
units and a hinged window for easy adjustmen t of the p ressure regulator. Product
Features
These portable units are fitted with a carrying handle allowing easy portability and
large base to provide stability on any surface.
Replacement filter elements are easily changed.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


All filter elements and spare parts are available from Respirex.
Large bore pipework an d pressu re regulator to allow maximum airflow.
Also available with six air supply outlets.
Rubber dust caps to protect inlets and outlets.
Top mou nted pressure gauge for easy visibility.
Internal low pressure alarm with an external whistle.
Weatherproof cabinet.
Air can be supplied from most suitably rated compressors.
The Filtration System Comprises of a Three-Stage Filter Set:
- Grade AO (First Stage) High Efficiency General Purpose Protection. For the removal of
particles down to 1 micron including coalesced liquid water and oil, providing a
maximum remaining oil aerosol content of 0.5mg/m3 @ 21°C Recommended filter life
6000 hours.
- Grade AA (Second Stage) High Efficiency Oil Removal Filtration. For the remov al of
particles down to 0.01 micron including water and oil aerosols, providing a maximum
remaining oil aero sol content of 0.01mg/m3 @ 21°C (preceded by Grade AO filter).
Recommended filter life 6000 hours.
- Grade ACS (Third Stage) Activated Carbon Filtration For the removal of oil vapour and
hydrocarbon odours giving a maximum remaining oil content of <0.003mg/m3
(0.003ppm) (excluding methane) @ 21°C (precede Grade ACSwith Grade AA filter).
Recommended filter life 1000 hours.
Benefits
- Manu factured in accordance with ISO 9001
- Long life Dominick Hunter filter elements
- Compatible with all compressor oils- AO & AA filter housings have sight glasses
allowing a visual check of liquid collection and drain function.
- AO & AA filter housings have automatic drain valves as standard so collected
condensate is always removed.
Important Notes - These units will not remove carbon monoxide, carbon dioxide
or other toxic gases or fumes.

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H yderabad 82.


Radiation Monitor Coleparmer

Data output and built-in timer let you document radiation activity over selected
sampling periods Set timer for periods of 1 to 10 minutes in one-minute increments,
10 to 50 minutes in ten-minute increments, or 1 to 24 hours in one hour in crements
the 4-digit LCD with auto-ranging bar graph updates readings every three seconds.
Monitors offer excellent sensitivity to low levels of alpha, beta, gamma, and X-rays.
Anti-saturation circuitry holds readout at full-scale in fields u p to 100 times the
maximum reading. Features dual miniature jack for 0 to 5 V output. Order Inspector
with internal probe or Inspector EXP for added versatility of external probe.
Select optional wipe-test plate for gross wipe counting. What s included: padded
carrying case (both models). Inspector EXP also includes external GM tube probe with
anodized aluminum or ABS plastic housing, black foam grip, and amphenol 31226 twin-
ax connectors. Operate on o ne 9 Valk aline battery (sold separately below).

Specifications
Display: 4-digit LCD
Detecto r: 2" dia pancake uncompensated GM tube with mica window
Window thickness: 13 4" (4.4 cm) dia
Accuracy: •}1.5% up to 20 mR/hr (130,000 cpm), •}20% above these v alues
Functions: adjustable timer, external calibration control
Output: dual miniature jack 0 to 5 V
Dimension s: 31 4"W x 6"H x 11 4"D

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, Hyderabad 82.


CBRN Suits - Respirex

The respirex PRPS powered respirator protective suit is intended to use by


emergency response personnel after a chemical or bio logical incident

• In a emergency, ready to use from the box.

• Fully visual head up display showing system condition

• Larger hood facilitating a hard hat and a greater vision

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H yderabad 82.


• Made from a high performance multi layer poly fabric

• High spec filter canisters specifically designed to protect against industrial


and military gases and vapours, solid particulates and biological agents

• Tested at DSTL portion down against chemical warfare agents

• 75 minute total duration

• Integral boot and tactical gloves, waist belt and foam packed pads for user
comfort

• Ergonomically designed in a range of 5 sizes

• Gas tight non permeable construction

• Light weight ensemble designed for comfort, mobility and ease of


movement

• Lower physiological loading

• Constant air flow for user comfort Enhanced CBRN filters

CBRNE software upgrade - Full scale version

Proposal for EOD Vehicle Dated 24 Nov - 2010

Totem International Ltd, #6, Totem House, Panjagutta, H yderabad 82.

You might also like