Professional Documents
Culture Documents
Gostaria de saber como faço o ajuste BI-direcional desta máquina? De acordo como o
manual de serviços, é necessário um diskete com o programa de ajuste.
AJUSTE DE IMPRESSÃO BIDIRECIONAL
Este ajuste deve ser executado toda vez que forem desmontado o mecanismo de impressão,
conjunto carro de impressão, troca de cabeça , eixo do carro ou alguma parte mecânica que
se relacione com o sistema de impressão.
O ajuste de impressão bidirecional para a impressora LX 300 está disponível somente para
Técnicos da rede Credenciada de Assistência Técnica. CCATs, pois é necessário o uso de um
programa de calibrações e teste ( Confidence Test Versão 4.8 ).
1 - Ligue a impressora e carregue o formulário continuo no tracionador.
2 - Execute o programa em modo DOS Ctest.4.8
3 - Selecione no menu de opões as impressoras de 9 pinos ( agulhas )
4 - Selecione no menu de opções a impressora LX 300
5 - Selecione o item do menu ( bidirecional Adjustment ) e pressione Enter.
Neste momento a impressora será resetada e aguardará um tempo de 20 segundos para que
termine sua incialização, Quando pronta pressione “ Y “ e enter.
Será impresso 21 padrões de impressão no modo Draft com variações de -10 a + 10 para
que seja escolhido a melhor opção dentre elas e digitado o valor do melhor padrão de
alinhamento
OBS.: Para rodar o ctest em PCs acima de 233MHz, é necessário um patch que está
disponível aqui
Para utiliza-lo, o programa ctest deverá estar exclusivamente em uma pasta
própria...quando rodar o programa (patchcrt.exe) o mesmo vai perguntar onde está o
programa (por ex: c:\ctest\ctest.exe), após vai perguntar se vc tem o programa original em
outro local (backup), após colocar "yes", pode rodar o ctest que vai abrir normalmente.
Esse patch funciona em quase todos os programas (dos) que apresentam a mensagem
"runtime error"
Boa sorte!
InkPlus®
A freeware utility, which patches some older MS-DOS EXE files, to permit them to run
on fast Pentium CPUs.
This speed problem applies only on CPUs which match or exceed the speed of a
Pentium 200 (approx), and applies only to some older versions of a specific software
module named CRT.ASM, which was part of the Turbo-Pascal offerings from Borland.
Be aware that this CRT.ASM module has been used in a variety of other products, and
it is often not initially obvious that some flawed CRT.ASM code is embedded in other
apps.
The symptom is a Divide-by-Zero error message when the app is run on a fast CPU, or a
Divide Overflow error message, or a Runtime Error 200 message, or similar.
Unfortunately, the error message usually won't simply say that the CPU is too fast !.
This program is freeware: use it at your own risk; take good backups first; test carefully
- the usual small print.
We'd appreciate feedback, if it works for you, and feedback if it does not !.
Note-1: Sometimes, EXE files are Compressed. PatchCRT does not include any de-
compression code, and therefore will not repair compressed EXE files. If PatchCRT
does not work for you, you might check if the EXE file is compressed, eg using
PKLITE, LZEXE, etc. (To do so, you'll probably need to analyse the internal structure
of the EXE file, which is WAY outside the scope of this brief note!!). If it's compressed,
identify the compressor that was used, run the appropriate de-compressor and retry
PatchCRT on the de-compressed file. If it works, you can probably re-compress the
updated file, or just use the de-compressed version.
Note-2: We think there is some other software product out there with the same name
(PatchCRT). We apologise if this is a source of confusion. We could change the name
of this utility, if needed, though it has been on Compuserve (and on this website!) for
some years, and it's probably now "late-in-the-day" to change it. Also, the need for this
utility is quite small, and a duplicate name is probably of little concern.