Professional Documents
Culture Documents
Drip Containment
fFitted with drain connection
Shaft Sleeves
fReplaceable bronze sleeves
fProtects shaft throughout
Stuffing Box
Bearings
f Easy removal with bearing nut
f Sealed, permanently greased
bearings
f Low Friction Lost Bearing
f Maintenance free
Suction and
Discharge on
same center line
Shaft
fMinimum deflection for long bearing life
fMinimum vibrations
f Identical shaft and parts for left and
right-hand drives
HSC Fire Pumps & Packaged Systems
JOCKEY
CONTROLLER FIRE PUMP
CONTROLLER
FUEL
TANK 2
8
4 3
12
3 1
10 9
M ST RONG
AR
11
6 7
1800 RPM
6 X 5 X 12
8 X 6 X 12.5
6 X 5 X 12 6 X 5 X 12 1500
200
1250
150 8 X 6 X 10
8 X 6 X 10 12 X 8 X 18
1000
6 X 5 X 10
5 X 4 X 10 5 X 4 X 10
12 X 8 X 18
8 X 6 X 15
12 X 8 X 18 750
100
8 X 6 X 15
6 X 5 X 15 10 X 8 X 14
6 X 5 X 15 10 X 8 X 14 500
6 X 5 X 12
50 5 X 4 X 12 8 X 6 X 12.5 8 X 6 X 12.5
275
Electrical 50 Hz
1500 RPM
6 X 5 X 15
1500
200 6 X 5 X 15
6 X 5 X 15
10 X 8 X 14
1250
10 X 8 X 14
6 X 5 X 12 6 X 5 X 12
150
8 X 6 X 12.5 1000
8 X 6 X 12.5
10 X 8 X 11
5 X 4 X 10 6 X 5 X 10 750
100 8 X 6 X 10
8 X 6 X 10
5 X 4 X 10 6 X 5 X 9.5 8 X 6 X 10
12x8x18 500
8 X 6 X 15 10 X 8 X 14
8 X 6 X 16 8 X 6 X 16
50 8 X 6 X 16
275
Bearings shall be mounted in cartridge type housing so that they shall be The automatic transfer switch shall be capable of automatic power transfer
replaceable without opening pump casing. Bearings shall be easily from normal to alternate_______________ [generator] / [second utility]
removable by rotating bearing removal nut. No special tools or bearing puller emergency power source in case of normal supply failure and automatically
are to be necessary. re-transfer after restoration of normal power conditions.
Each stuffing box shall be fitted with a three piece bronze gland. Stuffing box
6. JOCKEY PUMP
shall be fitted with a stuffing box extension to facilitate the packing rings
The jockey pump shall be manufactured by _____________
removal. Packing rings shall be removable without disturbing wetted parts or
Model______________ for a capacity of __________ USGPM and a pressure
the pump bearings. Water seal recirculation lines made from non-corroding
boost of ____________ PSIG. The jockey pump shall be driven by an [open
material shall be piped to pump volute.
drip proof] [totally enclosed fan cooled] electric motor of _______HP
2. ELECTRIC MOTOR ________ RPM __________ VOLT ______ PHASE________ CYCLE.
The fire pump shall be directly coupled through flexible coupling to a
7. JOCKEY PUMP CONTROLLER
horizontal electric motor with a maximum HP of_____________ at
The jockey pump shall be controlled by an automatic jockey pump
__________RPM, _________ VOLT , _______ PHASE _________ CYCLE.
controller model___________ as manufactured by ___________with
Motor shall be UL Listed for fire pump service, open drip proof, standard
efficiency with 1.15 service factor.
full voltage starter.