Professional Documents
Culture Documents
HZ2012
Product Manual
V1.1.0
SilverPAC 1mW ZigBee Module HZ2012 – Product Manual
Version Control
Copyright Notice
The information contained in this document is the proprietary information of Zhejiang
SilverPAC HEA Ltd. (hereinafter referred as SilverPAC). The contents are confidential and
any disclosure to persons other than the officers, employees, agents or subcontractors of
the owner or licensee of this document, without the prior written consent of SilverPAC, is
strictly prohibited.
Contact Us
Zhejiang SilverPAC HEA Limited
Add: 6/F, East Tower, Holley Technology Park, No.181 Wuchang Ave., Hangzhou, 310023,
P.R.C
Tel: +86-571-88471702
Fax: +86-571-88471702
Web: http://www.silverpachea.com
E-mail: marketing@silverpachea.com
Contents
1. Introduction
SilverPAC 1mW ZigBee Module (HZ2012) is a type of surface mounted module that enable
users to implement ZigBee/IEEE 802.15.4 compliant solution which satisfies the needs of
low-cost, low-power wireless sensor networks. The module is easy-to-use, save board
space and provide reliable delivery of data between devices.
SilverPAC 1mW ZigBee Module (HZ2012) operates within the ISM 2.4GHz frequency band.
The module’s default configuration supports a wide range of data system applications. The
module uses Ember’s EM250 wireless microcontroller to provide a comprehensive solution.
SilverPAC 1mW ZigBee Module (HZ2012) is designed for industrial use and it is ROHS, CE
and FCC compliant.
2. Product Features
State-of-art EM250 chip adopted
Stable and reliable Ember protocol stack embedded
Easy to implement ZigBee technology integration for hardware equipment
manufacturers
Wide communication range and high network reliability
ROHS, CE, FCC compliant *
Industrial class electric properties with up to ± 8KV ESD protection capability *
Items marked * are new features compared with previous model.
3. Specifications
Table 3-01: Specifications of 1mW EM250-Based ZigBee Module (HZ2012)
4. Pin Configurations
Module
Signal EM250 Pin Pin Description
Pin
GPIO2;
1 MSCLK 24 SPI Clock of SC2;
I2C Clock of SC2
GPIO0;
2 MOSI 21
SPI Master output slave input of SC2
GPIO3;
3 GPIO_3 25
SPI slave select of SC2
GPIO1;
4 MISO 22 SPI Master input slave output of SC2
I2C data of SC2
GPIO6;
5 GPIO_6 29
ADC input 2
GPIO12;
6 RTS 20
UART RTS handshake of SC1
GPIO7;
7 GPIO_7 30
ADC input 3
GPIO11;
UART CTS handshake of SC1;
8 CTS 19
SPI Clock of SC1
Module
Signal EM250 Pin Pin Description
Pin
GPIO16;
9 IRQD 40
External interrupt source D
10 RSTB 13 Active low chip reset (internal pull-up)
11 NC - -
GPIO4;
12 PTI_EN 26 ADC input 0;
Frame signal of Packet Trace Interface
13 VDD - DC3.3V supply
GPIO5;
14 PTI_DATA 27 ADC input 1;
Data signal of Packet Trace Interface PTI
15 VDD - DC3.3V supply
GPIO8;
16 GPIO_8 31 ADC reference output;
External interrupt source A
17 VDD - DC3.3V supply
GPIO9;
UART TXD of SC1;
18 TXD 32
SPI Master output of SC1;
I2C data of SC1
19 NC - -
GPIO10;
UART RXD of SC1;
20 RXD 33
SPI Master input of SC1;
I2C Clock of SC1
21 GND - Ground
Serial interface, clock
22 SIF_CLK 34
(internal pull-down)
23 GND - Ground
24 SIF_MISO 35 Serial interface, master in/slave out
25 GND - Ground
26 SIF_MOSI 36 Serial interface, master out/slave in
27 GND - Ground
Serial interface, load strobe
28 SIF_LOADB 37
(open-collector with internal pull-up)
5. Mechanical Drawings