You are on page 1of 2

PNEUMATIC CATAPULT LAUNCHER

M C2555LLR is a
versatile launcher and

part of the Robonic third

generation launcher

family.

Sagem DS Sperwer B being launched off Robonic MC2555LLR at RATUFC in Kemijärvi, Finland.

T he launcher is designed from the offset for both tactical


and target use. Its wide envelope in both speed and mass allow
Greatest advantages in the new MC2555LLR are in logistics: the
launchers small size and compactness compared to its capabilities
it to be used for both small and large UAV‚s as well as slow and and performance.
fast. Adjustable launching pressure allows the MC2555LLR to
launch various types of UAVs, both reconnaissance and target, The MC2555LLR can be mounted on a trailer to be towed or
propelled and jet engine powered. alternatively on an ISO container frame to be mounted on a truck
or trailer for mobility, ease of transport and storage. It can also
The MC2555LLR has been designed to be operated in varying be fitted in a standard ISO container for transport. It is easy to
weather conditions and temperatures with minimal maintenance transport on roads, by air or sea. All part of MC2555LRL launcher‚s
requirements. The launcher is equipped with its own power pack improved logistics capabilities.
that makes it self-sustaining for operations.
When all features above
The closed pneumatic system allows system pressures to recover are combined with minimum
quickly and enables the launcher to be launched again in a matter set up time of 5 minutes
on minutes. The MC2555L is easy to operate with minimal personnel MC2555LLR provides a
(one or two operators) depending on the conditions. reliable, fast and feasible
way to launch several
The launcher and launch process have been designed with the types UAVs.
operators‚ safety in mind and made safe by encompassing several
safety features in the launch process.
Robonic 3rd generation launcher
MC2555L deployed and the
MC2555LLR in transport condition
Elbit Hermes 450 being launched off Robonic MC2055L. and packaged in a 20” ISO container.
EADS DO-DT target drones on Robonic MC2555LLR launchers.

Robonic MC2555LLR launcher with


EADS DO-DT35 target drone.

Operating Range of Robonic Launcher MC2555LLR TECHNICAL DATA Catapult overall dimensions
Set up time ready for launch < 15 min Assembled for transport

Operating temperature -30ºC to +50ºC Length 5656 mm / 7144mm


Width 2270 mm
Launcher recovery time < 5 min Height 2100 - 2210 mm w/trailer

Transport speed on roads 80 km/h


Deployed
Launcher weight ~ 5000 kg
Length 16700 mm
Max. power 1.5 MW Width 2270 mm

Launch angle 8 - 15º

Acceleration depends on a UAV Launched

Envelope of UAV take-off speed (see chart)

Envelope of UAV mass (see chart)

Robonic Ltd, UAV Launching Systems

Pinninkatu 53 C, 3rd floor. FIN-33100 Tampere, Finland

Tel. +358 3 273 0586Fax. +358 3 273 0588

sales@robonic.fi www.robonic.fi

You might also like