Professional Documents
Culture Documents
Hydraulics
Solutions Guide
Mobile Hydraulics Solutions Guide
Introduction Valves
Parker Hannifin Corporation....................................... 1 Open-Center Directional Control.............................. 43
Market Leadership...................................................... 2 Load-Sense Directional Control................................ 44
Parker is Service........................................................ 4 Hydraulic................................................................... 45
Mobile Hydraulic Components.................................... 6 Threaded Cartridge.................................................. 52
Integrated Hydraulic Circuits.................................... 55
Product Range Rotary Actuators......................................... 56
Pumps
Piston......................................................................... 8 Accumulators. ............................................... 58
Vane......................................................................... 12 Fluid Analysis & Conditioning............ 60
Hybrid....................................................................... 14 Fluid Connectors
Gear Pumps/Motors.................................... 15 Rubber Hose Products............................................. 63
Thermoplastic Products............................................ 64
Hydrostatic Transmission..................... 21 Brass Products......................................................... 65
Power Take-Offs........................................... 22 Quick Couplings....................................................... 66
Motors Tube Fittings............................................................. 67
Low Speed High Torque........................................... 27 Information
Fixed Displacement Low Speed High Torque........... 28
Variable Displacement Axial Piston.......................... 31 Sales Offices............................................................ 68
Fixed Displacement Bent-Axis Piston....................... 32 Action Directory........................................................ 70
High Speed............................................................... 33
Calzoni Radial Piston LSHT..................................... 34
Vane......................................................................... 36
Compact Hydraulics. ................................ 37
Hydraguide™ Hydrostatic
Steering Units. .............................................. 38
Mobile Cylinders.......................................... 39
Control Systems
IQAN......................................................................... 40
Remote..................................................................... 42
Parker is Engineering
Consider Parker your extended
applications design team. Need
new systems designed? Existing
applications improved? Parker offers
unparalleled engineering expertise.
We’ll help you develop cost-saving,
high-performance solutions that
improve user comfort, lengthen
machine life, and get the job done.
We are your innovation partner and
one stop for mobile hydraulics. Our
Worldwide Supplier to engineers design, prototype, analyze
Mobile Markets and fabricate mobile systems using
cutting-edge methods that push the
Parker Hannifin is a global, Fortune
envelope for quality, performance
300 Company and the world’s most
and reliability.
dynamic supplier of motion control
products, systems and solutions to Parker components and systems
mobile markets. We are the indus- are rugged and reliable, offering
try’s leading vendor of motion complete solutions for:
control products, with extensive • Aerial Devices
product lines that provide single
sourcing opportunities with unlimited • Agriculture
possibilities. Our mobile solutions • Construction
range from state-of-the-art compo-
nents to complete systems, which we • Forestry
back up with superior application • Material Handling
engineering and technical support.
• Mining & Drilling
The Corporation posts sales
exceeding $10 billion and delivers • Turf Care
hydraulic, pneumatic, electrome- • Waste Handling
chanical, fluid-connector and
filtration technology to over 427,000
customers. With international head-
quarters in Cleveland, Ohio, 287
manufacturing plants, and 12,000
distribution/MRO outlets located
strategically throughout North
America, Europe, Asia and South
America, Parker is truly a global
partner. Parker is listed on the
NYSE as PH.
1
Market Leadership
Parker is Mobile
The mobile market is
the foundation of Parker’s
success. We are the only
major motion control
manufacturer offering
benefit-driven, end-to-end
mobile systems. Our
comprehensive mobile
product lines offer a
complete selection of Parker is Leadership
hydraulic pumps, motors, power Customers inspire us to take the lead
take offs, cylinders, accumulators, in design, manufacturing and imple-
rotary actuators, valves, integ- mentation processes. From initial
rated manifolds and hydrostatic concept, to system installation, to
steering units. Our fluid connectors, after-sale support, Parker works hard
filters, sensors and IQAN electron- to meet all your expectations and
ics complete the package. support your strategic goals.
As the world’s most responsive
supplier of mobile hydraulic systems
and solutions, Parker provides its
customers with an expansive prod-
uct line, engineering expertise and
value-added support services.
Making Sure We Get It Right... Together
Communication
Know application and plan scope
Determination
Baseline test and benchmark
Rationalization
Evaluate options
Optimization
Choose the right system Process Driven
Evaluation Support For Total
Prototype System Solutions
Qualification
Prove the benefits
Validation
Meet or exceed requirements
Implementation
Release design
Market Leadership
Parker is User-Friendly
• Are streamlined
and compact
• Use fewer components
• Require less space
• Offer faster cycle times
Parker is Quality • Are fuel and energy
Parker’s ISO-certified global manu- efficient
facturing facilities deliver quality
components and subsystems, quick • Reduce noise
turnaround and top-notch service.
Our experienced and knowledge-
able customer service team ensures
on-time, on-budget product deliv-
ery, and can develop customized
solutions to create additional value
in the supply chain.
Parker is Service
Centralized Order
Management (COM)
Parker’s Centralized Order Manage-
ment (COM) service provides easy
ordering, scheduling and logistic
solutions that expedite supply-chain
processes. With a single call, you
can order all the Parker motion
control products you need from
a representative who understands
your business requirements. Cus-
Parker is Service tomized kits deliver subassemblies
From field engineers to Mobile and components in one complete,
Technology Centers, from Cen- ready-to-install package.
tralized Order Management to
customer training and online
resources, Parker is at your service.
Parker is Service
Training
Parker leads the industry in techni-
cal training for mobile hydraulics.
We offer comprehensive
texts, hands-on classroom
instruction and web-
based seminars for our
employees, distributors
and customers.
Our state-of-the-art
training programs target
systems design, products
and field support. From
design engineers to service
Customer Service Priority personnel, we have the training
Parker’s additional customer ser- program for you. In fact, we’ll
vice programs help you work faster, bring our new Innovation In
better and more cost-effectively. Motion Technology Trailer to
your front door for advanced Your Partner for
• Our Tech Team experts training and hospitality. Mobile Hydraulics
specialize in developing leak- Learn more about Parker training As the most comprehensive sup-
free connector applications. at www.parker.com/training or call plier of hydraulics and motion
• Parker Stores offer walk-up 216-896-2495. control solutions worldwide, Parker
convenience and fast, local can meet all your mobile systems
service when you need requirements. For more informa-
parts quickly. tion on how to partner with us, call
Mobile Systems Website
• The Hose Doctor provides 1-800-CPARKER (272-7537).
hose and connector repair and Find the industry’s most
maintenance, keeping your comprehensive site for mobile
systems leak-free and your hydraulics product information,
machines moving. downloadable catalogs, training
materials, product selection
• Our 3-Year Extended software and RFQ capabilities at
Warranty covers mobile www.parker.com/mobilesystems.
hydraulic products installed Search by product
with properly maintained family, product
Parker hydraulic filters. type, Parker manu-
facturing Division
or keyword using
our new, user-
3
friendly interface.
Year Extended
Warranty
Parker extends its standard limited
warranty to 36 months on all
Hydraulics Group products if they
are protected by properly installed
and maintained Parker hydraulic
filters. This warranty applies to
systems supplied by Parker and/or
its authorized Mobile Hydraulic
Technology Centers.
Mobile Hydraulic Components
Parker offers one of the world’s most extensive Power Take-Offs (PTOs)
mobile hydraulic product lines. From pumps and Whether you’re pulling, pushing or lifting, you need
valves to motors and motion controllers, all of our performance you can count on everyday – perfor-
products share a common heritage of advanced mance and reliability you will get from Chelsea auxil-
technology for your applications. They incorporate iary power systems. Chelsea has served the auxiliary
electronic control for precise motion, innovative power market since 1945 with the broadest coverage
new designs to reduce size, and a greater choice of in the industry. This industry-leading engineering,
functions than ever before. Parker mobile hydraulic innovation and performance is now available from
components and systems are designed to deliver Parker, and offers value-added and premier customer
precise and reliable control. service. When you need a Power Take-Offs system,
you need Chelsea Products from Parker.
Pumps
Parker’s broad line of energy-efficient hydraulic Motors
pumps includes fixed or variable displacement Our full line of high and low speed motors provide
models of piston, vane and gear pumps. Designed to power ranging up to 15,000 inch-pounds of torque.
handle a wide range of applications, Parker pumps A complete range of sizes is offered in gear, gerotor
are available with a full complement of electronic and and piston style operating configurations. Fixed and
computer controls. Like all Parker products, these variable displacement motors are available. Parker
pumps are manufactured with the finest materials hydraulic motors deliver excellent performance with
under strict quality control. The result is a pump that high efficiency, true wear compensation
delivers high efficiency and low maintenance under and longer service life.
the toughest operating conditions.
Mobile Hydraulic Components
Pumps Piston
P3 P3 piston pumps are ideal for mo- cold weather and high pump
bile applications that require high drive speeds.
self-priming speed and operating • Sealed shaft bearing
pressure up to 4600 PSI. These • Compact packaging
high performance pumps are suited • Low noise level
for mobile applications where inlet • Easy to install
fill characteristics are not ideal;
• Flexible, reliable,
i.e. high altitudes, long inlet lines, service friendly
Frame size P3 -075 -105 -145
Displacement (cm3/rev) 75 105 145
(in3/rev) 4.6 6.4 8.8
Max continuous pressure (Bar) 317 317 317
(PSI) 4600 4600 4600
Self priming speed @ 1 Bar
3000 2600 2500
inlet pressure
Piston Pumps
PAVC PAVC piston pumps are ideal for • Cartridge bronze clad port plate
many industrial applications with • Airbleed standard for quick
operating pressure up to 3000 PSI. priming
These compact pumps feature • Hydrodynamic cylinder barrel
convenient cartridge style controls bearing
and carry a full pressure rating on • Thru-shaft (PAVC100 only)
most water glycol fluids. • Full pressure rating on water
• High strength cast-iron housing glycol fluids
• Built-in supercharger • Pump case and shaft seal - see
• High speed capability - 3000 inlet pressure only
RPM (2600 RPM PAVC100) • Filter and/or cool drain
• Sealed shaft bearing line (100 PSI Max.)
• Two piece design for ease of
service
PVP PVP piston pumps are ideal for • Replaceable bronze port plate
medium duty industrial applications • Replaceable piston slipper plate
with operating pressure up to 3600 • Low noise levels
PSI. These service friendly pumps • Fast response times
are quiet and respond quickly to • Metric pilot, shaft and ports
flow demand changes. available
• High strength cast-iron housing
• Optional inlet/outlet locations
Pumps Piston
H3 • Closed loop
• High strength aluminum housing
and endcap
• Forged trunnion shaft Frame size H3 -10
• Bi-metal bronze/steel valve plate Displacement (cm3/rev) 10.2
• Large area cooling fins (in3/rev) 0.62
Max continuous pressure (Bar) 69
(PSI) 1000
Max operating speed (RPM) 3600
Premier The open-loop Premier Series The Premier Series pumps have
pumps are variable displacement been designed to operate in a
piston pumps with emphasis wide range of industries where
on superior design with few variable flow, high pressure and/or
maintenance requirements. Low high speeds are required; such as:
inlet velocity requirements allow presses, construction machinery,
the pumps to run faster than injection molding, wood, aircraft,
competitive models without the drilling, mining, steel and cranes.
added expense of boosting the
inlet. Modified pistons that reduce
the amount of trapped fluid volume
result in improved efficiency.
10
Piston Pumps
VP1 The VP1 is the world’s first vari- • Variable, Load Sense Control
able displacement pump for truck • Low noise level
applications. It can be close-cou- • High power-to-weight ratio
pled to a gearbox PTO (power take- • Compact and lightweight
off) or to a coupling independent • Withstands low temperatures
PTO (e.g. an engine PTO) which
• Sturdy design
meets ISO standard 7653-1985.
• Highly efficient
F1/F2 F1 fixed displacement piston pumps • Pressures up to 350 Bar (5000 PSI)
are widely used on truck applica- • High power capability
tions with operating pressure up to • Twin flow version available
5000 PSI. These lightweight, ef- • High self-priming speed
ficient pumps were designed specifi- • Easy to install
cally for truck applications including
• Easy to
cargo cranes, hook loaders, forest service
cranes and concrete mixers.
Series F1 25 41 51 61 81 101
Displacement (cm3/rev) 25.6 40.9 51.1 59.5 81.6 102.9
(in3/rev) 1.59 2.50 3.11 3.66 5.00 6.29
Max. operating pressure (Bar) 350 350 350 350 350 350
(PSI) 5000 5000 5000 5000 5000 5000
Shaft speed (RPM): unloaded 2700 2700 2700 2700 2300 2300
at 350 Bar2 2600 2400 2200 2200 20003 18003
Torque1 at 350 Bar (Nm) 142 227 284 331 453 572
(lb-in) 1261 2016 2522 2939 4023 5079
Input power, continuous (kW) 31 46 52 61 76 86
(hp) 39 57 67 84 102 115
1 Theoretical value
2 Valid at an inlet pressure of 1.0 Bar (abs.) when operating on mineral oil at a viscosity of 30 mm2/s (cSt).
3 Valid with 2½" inlet (suction) line. With 2" suction line: F1-80 – max 1400 RPM. F1-101 – max 1200 RPM.
11
Pumps Vane
SDV Single The SDV Series includes fixed • Two compact frame sizes
displacement vane pump ideal for • Low noise
low to mid pressure applications. • 100% tested
Their compact design and low noise • Easy to convert
features make them well suited for or repair
filter carts, test stands and remote
pilot pumps.
Series SDV10 -1 -2 -3 -4 -5 -6 -7
Displacement (cm3/rev) 3.3 6.6 9.8 13.1 16.4 19.5 22.8
(in3/rev) 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Max. continuous pressure (bar) 175 175 175 175 175 150 140
(PSI) 2500 2500 2500 2500 2500 2200 2000
Max. speed (RPM) 1800 1800 1800 1800 1800 1800 1800
SDV Double The SDV Series includes fixed • Two compact frame sizes
displacement vane pumps ideal for • Low noise
low to mid-pressure applications. • 100% tested
A double pump provides the flex- • Easy to convert
ibility of two different displace- or repair
ments within one housing. Compact
design and low-noise features make
them well suited for filter carts, test
stands, remote pilot pumps, and
for hi/lo circuits.
12
Vane Pumps
13
Pumps Hybrid
Frame Size T6H*** T6H20B*** T6H20C*** T6H29B*** T6H29C*** T6H29D *** T6H29DB ***
Displacement* (cm3/rev) 5.7 - 92.9 10.8 - 142.9 5.7 - 111.9 10.8 - 161.9 47.5 - 219.9 53.2 - 269.9
(in3/rev) 2.97 - 5.67 3.28 - 8.72 4.13 - 6.83 4.44 - 9.88 6.68 - 13.42 7.03 - 16.47
Max pressure** (Bar) 241 241 207 207 207 207
(PSI) 3500 3500 3000 3000 3000 3000
Max speed** (RPM) 2600 2600 2400 2400 2400 2400
*Piston pump at full displacement
**Lower for larger displacements. See catalog
***See catalog on CD for complete information
14
Gear Pumps/Motors
Gerotor Pump and Motor • Gerotor design (HSLT- • Roller bearings for long life and
www.parker.com/hyd/mgg High Speed/Low Torque) high OHL capacity
www. parker.com/hyd/pgg • Aluminum construction for • Buna-N Seals are standard for
optimum power to weight ratio petroleum and glycol based fluids
• Bi-directional – designed for fan • MGG-Motor – Shaft speeds
drive and cut off applications to 5000 RPM
• High-pressure mechanical seals • PGG-Pump – Shaft speeds to
available for series application to 3500 RPM
1000 PSI back pressure • Up to 17 HP output
for motors
Frame size P16 -45 -65 -85 -100 -115 -150 -180 -200
Displacement (cm3/rev) 14.4 20.8 27.3 32.1 36.7 48.1 57.4 63.9
(in3/rev) 0.88 1.27 1.67 1.96 2.24 2.93 3.51 3.90
Max continuous pressure (Bar) 207 207 207 207 207 207 152 138
(PSI) 3000 3000 3000 3000 3000 3000 2200 2000
Max speed (RPM) 3600 3600 3400 3300 3100 2800 2500 2200
15
Pumps/Motors Gear
20 Series
www.parker.com/hyd/20series • Aluminum or cast iron • Available with fluorocarbon seals
construction • Available in tandem and piggy-
• Clockwise or counter- back configurations
clockwise rotation • Available with integral logic valves
• Flows to 98 GPM per section
• Journal bearings
Frame size 25 -300 -350 -400 -450 -500 -550 -660 -770 -950
Displacement (cm3/rev) 99.1 115.9 132.4 149.1 164.7 181.22 219.9 254.4 315.0
(in3/rev) 6.05 7.07 8.08 9.10 10.05 11.06 13.42 15.50 19.22
Max continuous pressure (Bar) 207 207 207 207 172 172 172* 172* 172*
(PSI) 3000 3000 3000 3000 2500 2500 2500* 2500* 2500*
Max speed (RPM) 2500 2500 2500 2500 2500 2500 2500 2500 2500
*Consult factory
16
Gear Pumps/Motors
Frame size HP7 -250 -300 -350 -400 -450 -500 -550
Displacement (cm3/rev) 82.9 99.1 115.9 128.3 143.4 159.8 176.0
(in3/rev) 5.06 6.05 7.07 7.83 8.75 9.75 10.74
Max continuous pressure (Bar) 276 276 276 276 255 228 207
(PSI) 4000 4000 4000 4000 3700 3300 3000
Max speed (RPM) 2500 2500 2500 2500 2500 2500 2500
Frame size HP8 -400 -450 -500 -550 -600 -660 -770 -850
Displacement (cm3/rev) 128.3 143.4 159.8 176.0 193.0 213.9 246.0 268.3
(in3/rev) 7.83 8.75 9.75 10.74 11.78 13.05 15.01 16.38
Max continuous pressure (Bar) 276 276 276 276 276 248 228 207
(PSI) 4000 4000 4000 4000 4000 3600 3300 3000
Max speed* (RPM) 2500 2500 2500 2500 2500 2500 2500 2500
*Speeds above 2000 RPM require the suction to be pressurized to 5 PSI minimum.
17
Pumps/Motors Gear
Frame size PGP511/PGM511 -6 -7 -8 -10 -11 -14 -16 -18 -19 -21 -23 -27 -28 -31
Displacement (cm3/rev) 6 7 8 10 11 14 16 18 19 21 23 27 28 31
(in3/rev) .37 .43 .49 .61 .67 .85 .98 1.10 1.16 1.28 1.40 1.65 1.71 1.89
Max continuous pressure (Bar) 275 275 275 275 275 275 275 260 260 235 235 200 190 170
(PSI) 3988 3988 3988 3988 3988 3988 3988 3770 3770 3408 3408 2900 2705 2465
Max speed at 0 inlet & max
4000 4000 4000 3600 3600 3300 3000 3000 3000 2800 2800 2400 2300 2300
outlet pressure (RPM)
Frame size PGP517/PGM517 -14 -16 -19 -23 -25 -28 -33 -36 -38 -44 -52
Displacement (cm3/rev) 14 16 19 23 25 28 33 36 38 44 52
(in3/rev) .85 .98 1.16 1.40 1.53 1.71 2.01 2.20 2.32 2.68 3.17
Max continuous pressure (Bar) 250 250 250 250 250 250 250 250 250 220 200
(PSI) 3625 3625 3625 3625 3625 3625 3625 3625 3625 3190 2900
Max speed at 0 inlet & max
3400 3400 3300 3300 3100 3100 3100 3000 3000 2800 2600
outlet pressure (RPM)
18
Gear Pumps/Motors
PGP/PGM620 • Patented, interlocking body design • Pressure balanced design for high
www.parker.com/hyd/pgp-pgm620 • 12 tooth gears, bronze thrust plates efficiency
• Tandem, triple and cross-frame • Reduced system noise levels
pumps available compared to earlier models and
• Common inlets available for competitor’s pumps
tandem and triple pumps • High power through-drive capability
• Continuous operating pressures up • Wide range of integral valves for
to 275 bar power steering, power brakes, fan
• Production run-in available to suit drives and implement hydraulics
OEM application conditions and • Load-sense and solenoid-
to provide optimized volumetric operated unloading valves
efficiencies
Frame Size PGP/PGM620 0160 0190 0210 0230 0260 0290 0330
Displacement (cm3/rev) 16.0 19.0 21.0 23.0 26.0 29.0 33.0
(in3/rev) .98 1.16 1.28 1.04 1.6 1.8 2.01
Max. continuous pressure
(Bar) 275 275 275 275 275 275 275
(PSI) 3988 3988 3988 3988 3988 3988 3988
Frame Size PGP/PGM620 0360 0370 0410 0440 0460 0500 0520
Displacement (cm3/rev) 36.0 37.0 41.0 44.0 46.0 50.0 52.0
(in3/rev) 2.2 2.3 2.5 2.7 2.8 3.1 3.2
Max. continuous pressure
(Bar) 250 250 220 210 210 210 210
(PSI) 3625 3625 3190 3045 3045 3045 3045
19
Pumps/Motors Gear
Frame size PGP315/PGM315 -05 -06 -07 -08 -10 -11 -12 -13 -15 -16 -17 -18 -20
Displacement (cm3/rev) 10.2 12.7 15.2 17.8 20.3 22.9 25.9 27.9 30.5 33.0 35.6 38.1 40.6
(in3/rev) .620 .775 .930 1.09 1.24 1.40 1.55 1.71 1.86 2.02 2.17 2.33 2.48
Max continuous pressure (Bar) 245 245 245 245 245 245 245 245 225 215 200 190 175
(PSI) 3500 3500 3500 3500 3500 3500 3500 3500 3300 3100 2900 2700 2500
Max speed (RPM) 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000
Frame size PGP330/PGM330 -05 -07 -10 -12 -15 -17 -20
Displacement (cm3/rev) 16.1 24.2 32.3 40.4 48.4 56.5 64.6
(in3/rev) .985 1.47 1.97 2.46 2.95 3.44 3.94
Max continuous pressure (Bar) 245 245 245 245 245 225 210
(PSI) 3500 3500 3500 3500 3500 3250 3000
Max speed (RPM) 3000 3000 3000 3000 3000 3000 3000
Frame size PGP350/PGM350 -05 -07 -10 -12 -15 -17 -20 -22 -25
Displacement (cm3/rev) 20.9 31.3 41.8 52.2 62.7 73.1 83.6 94.0 104.5
(in3/rev) 1.28 1.91 2.55 3.19 3.82 4.46 5.10 5.73 6.38
Max continuous pressure (Bar) 245 245 245 245 245 225 210 190 175
(PSI) 3500 3500 3500 3500 3500 3250 3000 2750 2500
Max speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400 2400
Frame size PGP365/PGM365 -07 -10 -12 -15 -17 -20 -22 -25
Displacement (cm3/rev) 44.3 59.0 73.8 88.5 103.3 118.0 132.8 147.5
(in3/rev) 2.70 3.60 4.50 5.40 6.30 7.20 8.10 9.00
Max continuous pressure (Bar) 245 245 245 245 245 245 225 210
(PSI) 3500 *Functioning
3500as motor 3500 3500 3500 3500 3250 3000
Max speed (RPM) 2400 2400 2400 2400 2400 2400 2400 2400
20
Hydrostatic Transmission
Gold Cup and also has digital (Flow/Pressure) • Auxiliary pump can be changed
capability for the most difficult of without disassembling the
control requirements. transmission
The Gold Cup Series has been • Standard SAE keyed or splined
designed to operate in a wide range drive shafts are available
of industries needing closed-loop • High pressure mechanical shaft
control, high pressure, high power seals can be changed without
density such as Blast Hole Drill disassembling the transmission.
Double lip seals are also available
Rigs, Shredding, Cranes, Mining,
Hydraulic Test Stands, Pulp and • One piece stroking vane/cam
means no lost motion, zero
Paper, Military, Marine, and
backlash, better control, and no
Power Generation. linkages to wear out
• Quick change valve block – easy • Stroking vane seals are pressure
The Gold Cup Hydrostatic to service or replace loaded for longer life
Transmission pumps are variable • Modular controls – easy to • Standard compensator vent ports
displacement piston pumps of an service and change allow for a wide variety of con-
unparalleled rugged design. Rated • Versatile controls – can be located trols (See applications manual)
to 5000 PSI continuous pressure on either side of pump or motor • Rocker cam displacement indica-
and continuous duty, the Gold Cup for maximum freedom of design tor helps troubleshoot the system
design has the unique feature of • Dampened low inertia rocker cam • Modulated servo pressure saves
an internal servo/replenish and the – more stable, quieter and faster power
ability to utilize system over pres- than other designs
• Standard Code 62 SAE split
sure to directly control the stroking • Exclusive zero-backlash rotary flange connections
chambers. This affords the fastest servo design – lifetime accuracy
• Conforms to SAE mounting
and most stable control strategy • Field adjustable compensator standards. These products are
available. override – easily adjusted without qualified to meet Military speci-
The controls are completely modu- removing from machinery fications MIL-P-17869A and
lar in design and can be configured • Precision barrel bearing, a distinc- MIL-S-901-C Grade A
to meet most any system require- tive Parker Denison Hydraulics • Fastest compensator response:
ments with standard factory options. feature for over 30 years – Gives maximum of 10%
permits high speeds, high pressure overshoot at rated
All internal wear surfaces are pressure and provides long life
hydrostatically balanced and/or conditions (guaranteed times
• Patented ring style replenishing under all conditions; faster
hydraulically linked allowing for a checks fastest operation with no response times possible
long and serviceable life. The Gold sliding poppets or parts and low depending upon application)
Cup pump also has the ability to pressure drop
run in many open loop applications • Hot oil shuttle available – fast,
reliable operation
21
Power Take Off
22
Power Take Off
23
Power Take Off
24
Power Take Off
25
Power Take Off
26
Low Speed High Torque Motors
110A
716
700
Series 700 072 108 142 176 212 258
Geometric displacement
Series (cm3/rev) 59 88 116 144 174 211
(in3/rev) 3.6 5.4 7.1 8.8 10.6 12.9
Parallel (cm3/rev) 118 177 233 288 347 423
(in3/rev) 7.2 10.8 14.2 17.6 21.2 25.8
Max cont. differential pressure
Series (Bar) 170 170 170 170 155 155
(PSI) 2500 2500 2500 2500 2250 2250
Parallel (Bar) 170 170 170 170 155 155
(PSI) 2500 2500 2500 2500 2250 2250
Max operating speed
Series (rev/min) 890 843 695 688 580 440
Parallel (rev/min) 782 656 481 419 352 268
Series 110A 036 054 071 088 106 129 164 189 241
Geometric displacement (cm3/rev) 49 89 116 144 174 211 269 310 395
(in3/rev) 3.6 5.4 7.1 8.8 10.6 12.9 16.4 18.9 24.1
Max Continuous pressure (Bar) 170 170 170 170 155 155 140 140 120
(PSI) 2500 2500 2500 2500 2250 2250 2000 2000 1750
Max operating speed (rev/min) 858 740 684 622 519 437 415 350 279
27
Fixed Displacement
Motors Low Speed High Torque
Frame size TB -0036 -0045 -0050 -0065 -0080 -0100 -0130 -0165 -0195 -0230 -0260 -0295 -0330 -0365 -0390
Displacement (cm3/rev) 36 41 49 65 82 98 130 163 195 228 260 293 328 370 392
(in3/rev) 2.2 2.5 3.0 4.0 5.0 6.0 8.0 10.0 11.9 13.9 15.9 17.9 20.0 22.6 24.0
Max cont pressure (Bar) 124 124 124 124 124 124 124 124 124 103 100 97 93 86 83
(PSI) 1800 1800 1800 1800 1800 1800 1800 1800 1800 1500 1450 1400 1350 1250 1200
Max operating speed
932 785 678 511 409 454 430 343 287 246 216 191 171 151 143
(rpm)
Frame size TE -0036 -0045 -0050 -0065 -0080 -0100 -0130 -0165 -0195 -0230 -0260 -0295 -0330 -0365 -0390
Displacement (cm3/rev) 36 41 49 65 82 98 130 163 195 228 260 293 328 370 392
(in3/rev) 2.2 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.6 24.0
Max cont pressure (Bar) 140 140 140 140 140 140 140 140 140 123 116 109 102 93 88
(PSI) 2030 2000 2000 2000 2000 2000 2000 2000 2000 1750 1650 1550 1450 1325 1250
Max operating speed
1141 1024 1020 877 695 582 438 348 292 328 287 256 228 203 191
(rpm)
28
Fixed Displacement
Low Speed High Torque Motors
TK
TF TG
Frame size TF -0080 -0100 -0130 -0140 -0170 -0195 -0240 -0280 -0360 -0405 -0475
Displacement (cm3/rev) 81 100 128 141 169 197 238 280 364 405 477
(in3/rev) 4.9 6.1 7.8 8.6 10.3 12.0 14.5 17.1 22.2 24.7 29.1
Max cont pressure (Bar) 207 155 138 138 138 138 138 138 130 128 113
(PSI) 3000 2250 2000 2000 2000 2000 2000 2000 1880 1850 1645
Max operating speed
693 749 583 530 444 381 394 334 258 231 195
(rpm)
Frame size TG -0140 -0170 -0195 -0240 -0280 -0310 -0335 -0405 -0475 -0530 -0625 -0785 -0960
Displacement (cm/rev) 141 169 195 238 280 310 337 405 477 528 623 786 959
(in/rev) 8.6 10.3 11.9 14.5 17.1 18.9 20.6 24.7 29.1 32.3 38.0 48.0 58.5
Max cont pressure (Bar) 207 207 207 207 207 207 207 172 138 138 121 103 69
(PSI) 3000 3000 3000 3000 3000 3000 3000 2500 2000 2000 1750 1500 1000
Max operating speed
660 554 477 393 334 303 277 232 237 213 182 143 118
(rpm)
Frame size TH -0140 -0170 -0195 -0240 -0280 -0310 -0335 -0405 -0475 -0530 -0625 -0785 -0960
Displacement (cm/rev) 141 169 195 238 280 310 337 405 477 528 623 786 959
(in/rev) 8.6 10.3 11.9 14.5 17.1 18.9 20.6 24.7 29.1 32.3 38.0 48.0 58.5
Max cont pressure (Bar) 207 207 207 207 207 207 207 172 138 138 121 103 69
(PSI) 3000 3000 3000 3000 3000 3000 3000 2500 2000 2000 1750 1500 1000
Max operating speed
660 554 477 393 334 303 277 232 237 213 182 143 118
(rpm)
29
Fixed Displacement
Motors Low Speed High Torque
Mechanical Brakes
Frame size DF -0080 -0100 -0130 -0140 -0170 -0195 -0240 -0280 -0360 -0405 -0475
Displacement (cm3/rev) 81 100 128 141 169 197 238 280 364 405 477
(in3/rev) 4.9 6.1 7.8 8.6 10.3 12.0 14.5 17.1 22.2 24.7 29.1
Max cont pressure (Bar) 207 155 138 138 138 138 138 138 130 128 113
(PSI) 3000 2250 2000 2000 2000 2000 2000 2000 1880 1850 1645
Max operating speed
693 749 583 530 444 381 394 334 258 231 195
(rpm)
Max holding torque: 497 Nm (4400 in lbs)
Frame size DG -0140 -0170 -0195 -0240 -0280 -0310 -0335 -0405 -0475 -0530 -0625 -0785 -0960
Displacement (cm/rev) 141 169 195 238 280 310 337 405 477 528 623 786 959
(in/rev) 8.6 10.3 11.9 14.5 17.1 18.9 20.6 24.7 29.1 32.3 38.0 48.0 58.5
Max cont pressure (Bar) 207 207 207 207 207 207 207 172 138 138 121 103 69
(PSI) 3000 3000 3000 3000 3000 3000 3000 2500 2000 2000 1750 1500 1000
Max operating speed
660 554 477 393 334 303 277 232 237 213 182 143 118
(rpm)
Max holding torque: 497 Nm (4400 in lbs)
Frame size BH -0140 -0170 -0195 -0240 -0280 -0310 -0335 -0405 -0475 -0530 -0625 -0785 -0960
Displacement (cm/rev) 141 169 195 238 280 310 337 405 477 528 623 786 959
(in/rev) 8.6 10.3 11.9 14.5 17.1 18.9 20.6 24.7 29.1 32.3 38.0 48.0 58.5
Max cont pressure (Bar) 207 207 207 207 207 207 207 172 138 138 121 103 69
(PSI) 3000 3000 3000 3000 3000 3000 3000 2500 2000 2000 1750 1500 1000
Max operating speed
660 554 477 393 334 303 277 232 237 213 182 143 118
(rpm)
Rated holding capacity: 1800 Nm (16,000 in lbs)
30
Variable Displacement Axial Piston Motors
31
Motors Fixed Displacement Bent-Axis Piston
Frame size* F11 -05 -10 -12 -14 -19 -150 -250
Displacement (cm3/rev) 4.9 9.8 12.5 14.3 19.0 150.0 242.0
(in3/rev) 0.30 0.60 0.76 0.87 1.16 9.15 14.80
Max continuous pressure (Bar) 350 350 350 350 350 350 350
(PSI) 5000 5000 5000 5000 5000 5000 5000
Max operating speed** (RPM) 12,800 10,200 9400 9000 8100 3200 2700
*Use F12 for medium range displacement
**Functioning as motor
F12 Series F12 is the high performance • Laminated piston ring provides
bent-axis, fixed displacement low internal leakage and thermal
heavy-duty motor/pump series. shock resistance
They can be used in numerous • Accessory valves available
applications at unusually high • ISO, SAE and cartridge
shaft speeds. versions available
• Very high motor operating speeds • Proven reliability
• Pressures to 480 Bar (7000 PSI) • Easy to service with very few
• High starting torque moving parts
• Very high power capability • Super-shockless swing
• High overall efficiency relief valve
• Compact, lightweight motor
and pump
Frame size F12 -30 -40 -60 -80 -90 -110 -125
Displacement (cm3/rev) 30.0 40.0 59.8 80.4 93.0 110.1 125.0
(in3/rev) 1.83 2.44 3.65 4.90 5.7 6.72 7.6
Max continuous pressure (Bar) 420 420 420 420 420 420 420
(PSI) 6000 6000 6000 6000 6000 6000 6000
Max operating speed (RPM) 6700 6100 5300 4800 4600 4400 4200
32
High Speed Motors
33
Motors Calzoni Radial Piston LSHT
Calzoni Motors
The outstanding performance of for a smaller installed product
this robust product is the result of for the same displacement vs our
our original, patented design. Used competitors. Since there are no
widely in the mining, off shore internal connecting rods we have
drilling, oil field, and marine winch greatly reduced frictional drag as
markets; the Parker Calzoni motor well as most thrust loading. By
is produced in sizes from 32cc up creating a static balance on the shaft
to 6 gallons per revolution. The we have extended the expected
efficiency of our design allows lifetime as well.
Frame size MR/E* 33 57 73 93 110 125 160 190 200 250 300
Displacement (cm3/rev) 32.1 56.4 72.6 92.6 109.0 124.7 159.7 191.6 199.2 250.9 304.4
(in3/rev) 2.0 3.4 4.4 5.7 6.7 7.6 9.8 11.7 12.2 15.3 18.6
Max pressure (Bar) 300 300 300 300 300 300 300 300 300 300 300
(PSI) 4350 4350 4350 4350 4350 4350 4350 4350 4350 4350 4350
Max speed (rpm) 1400 1300 1200 1150 1100 900 900 850 800 800 750
Frame size MR/E* 330* 350 450 500* 600 700 800* 1100 1400* 1600 1800
Displacement (cm3/rev) 332.4 349.5 451.6 497.9 607.9 706.9 804.2 1125.8 1369.5 1598.4 1809.6
(in3/rev) 20.1 21.3 27.6 30.4 37.1 43.1 49.1 68.7 83.6 97.5 110.4
Max pressure (Bar) 250 300 300 250 300 300 250 300 250 300 300
(PSI) 3626 4350 4350 3626 4350 4350 3626 4350 3626 4350 4350
Max speed (rpm) 750 640 600 600 520 500 450 330 280 260 250
Frame size MR/E* 2100* 2400 2800 3100* 3600 4500 5400* 6500 7000* 8200
Displacement (cm3/rev) 2091.2 2393.1 2792.0 3103.7 3636.8 4502.7 5401.2 6460.5 6967.2 8226.4
(in3/rev) 127.6 139.9 170.4 189.4 221.9 274.8 329.6 394.2 408.7 502
Max pressure (Bar) 250 300 300 250 300 300 250 300 300 250
(PSI) 3626 4350 4350 3626 4350 4350 3626 4350 4350 3626
Max speed (rpm) 250 220 215 215 180 170 160 130 130 130
34
Calzoni Radial Piston LSHT Motors
Frame size MRT/E*/F** 7100 7800** 8500* 9000 9900** 10800* 14000 15500**
Displacement (cm3/rev) 7100.4 7808.4 8517.3 9005.4 9903.9 10802.4 14010 15276
(in3/rev) 433.5 476.5 519.8 549.5 604.4 659.2 854.9 932.3
Max pressure (Bar) 300 250 250 300 250 250 300 250
(PSI) 4350 3626 3626 4350 3626 3626 4350 3626
Max speed (rpm) 150 130 120 130 120 110 80 75
Frame size MRT/E*/F** 16500* 17000 18000** 19500 20000* 21500** 23000*
Displacement (cm3/rev) 16542 16759 18025 19508 19788 21271 23034
(in3/rev) 1009.5 1022.7 1100 1190.5 1207.5 1298 1405.6
Max pressure (Bar) 250 300 250 300 250 250 250
(PSI) 3626 4350 3626 4350 3626 3626 3626
Max speed (rpm) 70 70 65 60 60 55 50
Frame size MRV/E* 300 330* 450 500* 700 800* 1100 1400*
MRD/E* 450 700 800* 1100 1400*
Displacement (cm3/rev) 304.1 332.4 451.6 497.9 706.9 804.2 1125.8 1369.5
(in3/rev) 18.6 20.3 27.6 30.4 43.1 49.1 68.7 83.6
Max pressure (Bar) 300 250 300 250 300 250 300 250
(PSI) 4350 3626 4350 3626 4350 3626 4350 3626
Max speed (rpm) 1000 1000 850 800 700 650 580 550
35
Motors Vane
M4
M5AF
Series M 3B 4C 4SC 4D 4SD 4E 4SE
Displacement (cm3/rev) 9.2-37.1 24.4-80.1 24.4-80.1 65.1-144.4 65.1-144.4 158.5-222 158.5-222
(in3/rev) .5-2.3 1.4-4.9 1.4-4.9 3.9-8.8 3.9-8.8 9.6-13.6 9.6-13.6
Max pressure* (Bar) 210 175 230 175 230 175 190
(PSI) 3000 2535 3335 2535 3335 2535 2795
Max speed* (rpm) 4000 4000 4000 4000 4000 3600 3600
36
Compact Hydraulics
750-1
750-2
37
Hydraguide™ Hydrostatic Steering Units
HGF
www.parker.com/hyd/hgf
• Compact package size
• Patented pressure dams
• Removable upper column
• Full pressure shaft seal
• Internal relief valve
• Low noise option
• Manual emergency steering
38
Mobile Cylinders
Standard Build Our Standard Build program offers • Superior BTU rod seal increases
www.parker.com/hyd/standbuild the benefit of standard tube and the conformity of the seal to the
rod sizes with custom design op- rod. The second lip on the seal
tions to create a highly engineered, improves stability, limiting the
quality cylinder configurable to rocking motion of the seal to
provide quick delivery. Various reduce seepage
mounting options are available. The • Buffer ring acts as a primary seal
configurable menu provides same and pressure spike suppressor.
day assembly drawings and same The combination of rod seal and
day pricing. Bill of materials and buffer ring results in an excep-
manufacturing processes support a tionally dry rod for longer life
reduced lead time. • Piston includes 2 wear rings
Seal kits are available on same day and bronze filled PTFE seal
delivery for consistent quality and designed for leak-free
standardization in service needs. service life
Standard Build cylinders are manu- • 1045/1050 chrome plated,
factured with Parker “Zero Leak” induction hardened, 100K yield
sealing technology which offers the rod is more resistant to damage
following benefits: to rod and seal
• 1026 DOM cylinder tube bores
• Additional outside diameter lip are skived and roller burnished
that prevents contaminates from to provide precision finishes for
entering the system by bypassing extended seal life
the OD of the wiper body
39
Control Systems IQAN
Rugged Hardware
The wide range of outdoor modules with flexible
I/O available with IQAN ensures complete machine
management. The system offers a building-block
approach that simplifies component design and instal-
lation and reduces development time and expense.
IQAN hardware is tested for robust operation and
compatibility with mobile hydraulic equipment. In
addition, it meets all industry and government stan-
dards for operation in severe conditions that include
extremely high or low temperatures, vibrations,
mechanical impact, and electromagnetic interference.
IQANdesign
IQANdevelop
IQANdesign
Mobility
Rapidly develop complex functionality for your
mobile machinery using IQAN software platforms – IQANdevelop
the best tools for the job. Simplicity
IQAN’s graphical programming language and diag-
nostic tools allow for rapid application development
without any specialized knowledge or expertise.
40
IQAN Control Systems
www.parker.com/hyd/iqan
Simple Software
The IQAN software suites offer a complete set of
tools for the machine builder. The IQAN suites
provide tools that allow OEMs to address all aspects
of the machine life cycle, from design, through
production to field service. The IQAN software tools
offer graphical, drag and drop programming, software
simulation and customization tools.
IQANdesign is a high level graphical design
tool which dramatically simplifies application
development for any mobile machine and reduces
development time. IQANrun software is a user-
friendly service and production tool which includes
a powerful, graphical measure capability and
simplifies machine tuning for increased productivity.
IQANscript software is a script development tool
which enables quality assurance for machine start-ups
and controlled service procedures, which increase
manufacturing productivity and product quality.
IQANcustomize is a tool that enables customization
of the IQANrun software functions and appearance
to create a unique service and production tool.
IQANdesign IQANdesign
IQANdevelop IQANdevelop
41
Control Systems Remote
Pneumatic The VP04 is a pneumatic pilot All connections are furnished with
www.parker.com/hyd/vp04 valve for the proportional remote couplings of the plug-in type. The
control of directional valves, signal ports can be obtained for 6
positioning cylinders, etc. Either mm or 1/4" O.D. hoses. The primary
linear or coordinate-lever ver- ports and tank ports are available in
sions of the VP04 are available. 6 mm, 8 mm, 1/4" or 5/16" I.D.
Principal applications include the
proportional remote control of
pneumatic spool-actuators and
positioning cylinders in mobile
VP04 or industrial hydraulic systems.
42
Open-Center Directional Control Valves
MV3 Parker offers a wide range of open- Parker’s valve models come with a
www.parker.com/hyd/mv3 center directional control valves wide selection of special metering
for mobile markets that also can spools designed to optimize ma-
be used as closed-center, constant- chine control and enhance operator
pressure and constant-pressure comfort. Our market experience in
unloaded valves. Each valve machine control will direct you to
technology offers unique features the right solution.
for improved machine performance
A full line of pilot controllers
and cost.
with spring packs matched to our
Parker also provides machine remote-actuated directional con-
VA/VG20 designers with a broad choice of trol valves ensures predictable and
www.parker.com/hyd/va-vg20 circuitries, spool positioners and reliable machine performance. For
port accessories within each valve electrohydraulic operation, all of
model. Field-proven differential our valves are designed to interface
area and pilot-operated relief with our IQAN electronics package.
valves also are available.
Open-Center Technology
Max Max Work Max Max Constant
Input Flow Port Flow Pressure Pressure Open Closed Constant Pressure Load
Series LPM (GPM) LPM (GPM) PSI Bar Center Center Pressure Unloaded Sense
MV3 30 (8) 30 (8) 3000 207 X X
BV06-solenoid only 38 (10) 38 (10) 3000 207 X
V10 57 (15) 57 (15) 3500 240 X X
BV18 76 (20) 76 (20) 3500 241 X
P70CF, P70CP 76 (20) 76 (20) 4600 315 X X X X X
MD06-solenoid only 95 (25) 95 (25) 3000 207 X
V20 95 (25) 95 (25) 3500 240 X X X
VA20 2500 172 X
170 (45) 170 (45) X X
VG20 3500 240
VA35 2500 172
246 (65) 246 (65) X X X
VG35 3500 240
V70, V90 379 (100) 379 (100) 3500 240 X
VO40 40 (11) 40 (11) 4350 300 X X
43
Valves Load-Sense Directional Control
44
Hydraulic Valves
Medium Pressure
BV3D 3-Way (Diverter) 207 (3000) Z\v" - 2" Steel or Stainless Steel
BVAM 2-Way 138 (2000) 2½" - 4" Steel
V500CS 2-Way 138 (2000) Z\v" - 1" Steel
V502SS 2-Way 138 (2000) Z\v" - 2" Stainless Steel
Low Pressure
BVAL 2-Way (Suction) 28 (400) Z\v" - 4" Aluminum
V500P 2-Way 41 (600) Z\v" - 2" Brass
V590P 2-Way (Right Angle) 17 (250) Z\v" - ½" Brass
45
Valves Hydraulic
Mobile Accessories
www.parker.com/hyd/accessories
Valve Function Pressure Flow Pressure (SAE Porting) Pressure (NTPF Porting)
CFD Priority-type flow control 56 Liters/Min (15 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
CFDA P.C., Priority-type flow control 56 Liters/Min (15 GPM) 172 Bar (2500 PSI) 138 Bar (2000 PSI)
DC P.C., Priority-type flow control 98 Liters/Min (26 GPM) 241 Bar (3500 PSI) 138 Bar (2000 PSI)
PD/PDC Flow divider/combiner 75 Liters/Min (20 GPM) 172 Bar (2500 PSI) 138 Bar (2000 PSI)
LO Sgl./Dbl. pilot operated check 94 Liters/Min (25 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
LOA Sgl./Dbl. pilot operated check 38 Liters/Min (10 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
WJL Diff. area poppet relief 94 Liters/Min (25 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
RPJL Pilot operated relief 94 Liters/Min (25 GPM) 345 Bar (5000 PSI) 138 Bar (2000 PSI)
RPL P.O. poppet type relief 225 Liters/Min (60 GPM) 345 Bar (5000 PSI) 138 Bar (2000 PSI)
DXV Ball-type crossover relief 38 Liters/Min (10 GPM) 172 Bar (2500 PSI) 138 Bar (2000 PSI)
DWV Diff. area crossover relief 113 Liters/Min (30 GPM) 345 Bar (5000 PSI) 138 Bar (2000 PSI)
HP 20 Hydraulic pilot pressure 75 Liters/Min (20 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
HP 50 Hydraulic pilot pressure 188 Liters/Min (50 GPM) 345 Bar (5000 PSI) 138 Bar (2000 PSI)
S-50 75 Liters/Min (20 GPM)
S-75 Manual selector 113 Liters/Min (30 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
S-100 225 Liters/Min (60 GPM)
SM Manual selector 75 Liters/Min (20 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
HM Manual selector 38 Liters/Min (10 GPM) 172 Bar (2500 PSI) 138 Bar (2000 PSI)
DS12,71,75 Manual double selector valve 94 Liters/Min (25 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
CFQ Priority-type flow control 113 Liters/Min (30 GPM) 207 Bar (3000 PSI) 138 Bar (2000 PSI)
46
Hydraulic Valves
D1FW D3FW
47
Valves Hydraulic
Series R*M R*R RS*M RS*R PR*M S*M UR*M US*M VS VM VBY*A VB
Function
Relief X X X X X X
Sequence X X X
Pressure Reducer X
Unloader X
Max. Operating
Pressure
(Bar) 350 350 350 350 350 350 350 350 350 350 350 350
(PSI) 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000
Maximum Flow
NG06 LPM) 25 25 40 25
(GPM) (6.7) (6.7) (10.7) (6.7)
NG10 LPM) 150 250 150 250 150 150 150 150 60 160 60
(GPM) (40) (66.7) (40) (66.7) (40) (40) (40) (40) (16) (42.7) (16)
NG25 LPM) 300 500 300 500 350 350 350 350
(GPM) (80) (133.3) (80) (133.3) (80) (80) (80) (80)
NG32 LPM) 650 650 650 650 650 650 650 650
(GPM) (173.3) (173.3) (173.3) (173.3) (173.3) (173.3) (173.3) (173.3)
48
Hydraulic Valves
Max Pressure
Series Ports Max. Flow SAE 61 Flange SAE 62 Flange
C5V06 ¾" 26.4 GPM 5000 PSI 6000 PSI
C5V08 1" 52.8 GPM 5000 PSI 6000 PSI
C5V10 1¼" 105.7 GPM 4000 PSI 6000 PSI
C5V12 1½" 198.1 GPM 3000 PSI 6000 PSI
Check Valves • Hydraulic velocity fuse valves • Versions for high shock and high
• Low cost check valves velocity applications
• Restrictor and poppet-style check • Valves mount in a variety of
valves positions
• Double cylinder locking valves • Pilot operated types
• Military equivalent versions
available
49
Valves Hydraulic
50
Hydraulic Valves
Flow Control Valves • Pressure and temperature com- • Reverse flow checks optional on
pensated valves available several valves
• Controlled flow in one or both • Variety of metering needles
directions • Versions offered with tamper-
• Simple set screw locks valve proof option
settings
• Versions available with Color-
flow scales
Industrial Accessories • Valves isolate the gage from • Spring-loaded spool on specific
and Plug Valves damage and pressure surges valves drains fluid to reservoir
• Pressure snubber offers one-piece • No power source required for
construction; no maintenance double-acting, hand operated
• Some valves provide partial pumps
snubbing while delivering instant • Certain valves flange mount in
pressure any position
51
Valves Threaded Cartridge
Check/Shuttle Valves
www.parker.com/hyd/tcsv
Max Working Flow
Valve Type Pressure Capacity
Bar (PSI) Liters/Min (GPM)
207 (3000) 83 (22)
Check valves
345 (5000) 378 (100)
Ball type check valves 207 (3000) 757 (200)
4-Bolt flange check valves 207 (3000) 606 (160)
Single & dual P.O. check valves 207 (3000) 95 (25)
Decompression check valves 207 (3000) 189 (50)
Shuttle valves 207 (3000) 113 (30)
52
Threaded Cartridge Valves
Load/Motor Controls
www.parker.com/hyd/TLMV
Max Working Flow
Valve Type Pressure Capacity
Bar (PSI) Liters/Min (GPM)
Counterbalance valves 207 (3000) 113 (30)
345 (5000) 681 (180)
Motor control valves 207 (3000) 757 (200)
53
Valves Threaded Cartridge
54
Integrated Hydraulic Circuits Valves
Specialty Valves
www.parker.com/hyd/tspec
Valve Type Max Working Flow
Pressure Capacity
Bar (PSI) Liters/Min (GPM)
Flow Control Spreader Valve 172 (2500) 151 (40)
Filter Cartridge 241 (3500) 57 (15)
55
Rotary Actuators
HTR Series The HTR is a rack and pinion rotary integrated into the end user’s prod-
www.parker.com/hyd/htr actuator in a compact package, pro- uct. Heavy duty bearings support
viding high power at low rotational large externally applied shaft loads.
speed. The gearing and cylinders are Standard and custom rotations are
self-contained and protected against available with a variety of options.
contamination, all within a preci-
sion machined housing that can be
HTR Pressure Displacement Torque
Series Bar (PSI) cm3/rad (in3/rad) Newton Meter (lb-in)
.9 207 (3000) 6 (0.36) 102 (900)
LTR Series 1.8 207 (3000) 12 (0.7) 203 (1800)
www.parker.com/hyd/LTR
3.7 207 (3000) 25 (1.5) 418 (3700)
5 207 (3000) 33 (2.0) 565 (5000)
7.5 207 (3000) 51 (3.1) 847 (7500)
10 207 (3000) 65 (4.0) 1130 (10,000)
15 207 (3000) 93 (5.7) 1695 (15,000)
22 138 (2000) 145 (8.8) 1695 (15,000)
The LTR Series is suitable for low- 30 207 (3000) 186 (11.3) 3390 (30,000)
pressure applications. High strength
45 138 (2000) 290 (17.7) 3390 (30,000)
alloy steel rack and pinion gearing is
combined with lightweight aluminum 75 207 (3000) 480 (29.3) 8474 (75,000)
housings to provide an effective, 150 207 (3000) 960 (58.6) 16,948 (150,000)
compact solution over a wide range
300 207 (3000) 1856 (113.3) 33,896 (300,000)
of rotation and power needs. Three
positions of rotation available with 600 207 (3000) 3701 (226.0) 67,791 (600,000)
a full range of options. LTR Series
101 102 (1500) 7 (0.40) 67 (592)
M (Mill) Series
www.parker.com/hyd/mill 102 68 (1000) 13 (0.80) 67 (592)
151 102 (1500) 20 (1.20) 200 (1770)
152 102 (1500) 39 (2.41) 399 (3530)
201 102 (1500) 46 (2.81) 479 (4240)
251 102 (1500) 70 (4.30) 728 (6443)
202 102 (1500) 93 (5.67) 957 (8470)
252 102 (1500) 141 (8.59) 1456 (12,885)
321 68 (1000) 187 (11.40) 1289 (11,407)
322 68 (1000) 374 (22.80) 2578 (22,813)
M (Mill) Series
The Mill (M) Series is the non-
tierod version of the rack and pinion 75 207 (3000) 442 (27) 8474 (75,000)
actuator that provides dependability 150 207 (3000) 901 (55) 16,948 (150,000)
features, improved durability and
300 207 (3000) 1836 (112) 33,896 (300,000)
enhanced ease of maintenance.
Encompassing a wide range of 600 207 (3000) 3669 (224) 67,791 (600,000)
performance and special features, 1000 207 (3000) 5800 (354) 113,000 (1,000,000)
it offers custom configurations to 50000 207 (3000) 285,523 (17,423) 5,650,000 (50,000,000)
fit special needs for materials, and
performance provisions for power,
speed, and duty cycle.
56
Rotary Actuators
The Tork-Mor Series converts fluid S46 34 (500) 160.52 (9.8) 458 (4050)
pressure to rotational power using DS46 17 (250) 319.41 (19.5) 424 (3750)
vane actuator technology. Torque S74 68 (1000) 355.45 (21.7) 2260 (20,000)
output is provided within a limited
range of rotation, either 100 de- DS74 51 (750) 710.89 (43.4) 3344 (29,600)
grees on a double vane or 280 S77 51 (750) 624.08 (38.1) 2859 (25,300)
degrees on a single vane unit. The DS77 51 (750) 1764.11 (106.6) 3819 (33,800)
compact, cylindrically shaped
S105 68 (1000) 1092.55 (66.7) 6926 (61,300)
housing can be easily integrated.
Bearing capacity is limited and seal DS105 68 (1000) 2186.73 (133.5) 14,010 (124,000)
bypass leakage flow compensation S108 51 (750) 1746.11 (103.6) 8022 (71,000)
is required to hold position. Units DS108 51 (750) 3490.58 (213.1) 16,383 (145,000)
can be selected with a variety of
options for mounting, shaft configu- S1012 34 (500) 2617.52 (159.8) 7943 (70,300)
ration, seals, stops and switches. DS1012 34 (500) 5236.69 (319.7) 16,044 (142,000)
57
Accumulators
Piston Accumulators
www.parker.com/hyd/pistonaccum
• Over 50 standard capacities from • Patented five-bladed V-O-ring
5 cu. in. (.075 liters) to 50 gallons piston seals in five standard seal
(189 liters) compounds
• 2", 3", 4", 6", 7", 8", 9" and 12" • Accumulator and gas bottle
nominal bore sizes configurations
• 207, 276 and 350 Bar (3000, 4000 • ASME, CE and other
and 5000 PSI) operating pressures certifications available
58
Accumulators
Diaphragm Accumulators
www.parker.com/hyd/diaphragm
• Standard capacities from 5 cu. in. • Compact and lightweight
(.075 liters) to 170 cu. in. (2.8 liters) • Low-cost, non-repairable design
• Maximum operating pressures up • Quick responding diaphragms of
to 250 Bar (3600 PSI) nitrile or hydrin
Inline Pulse-Tone™
Shock Suppressors
www.parker.com/hyd/pulsetone
• Reduces pulsations and shock
• Compact size, inline mounting
• 207 and 345 Bar (3000 and
5000 PSI) models
• NPT, BSPP, SAE and split flange
connections
• Stainless steel model for water/
chemical service
59
Fluid Analysis & Conditioning Filtration
Low Pressure
www.parker.com/hyd/filterlow
Model Max Flow Max Pressure Mounting
LPM (GPM) Bar (PSI) Style
12AT 64 (17) 10.3 (150) Spin-on
50AT 136 (36) 10.3 (150) Spin-on
12AS 75 (20) 10.3 (150) Inline
50AS 190 (50) 10.3 (150) Inline
PT 190 (50) 10.3 (150) Tank top
• Various mounting configurations
KLT/KLS 452 (120) 10.3 (150) Tank top
• High capacity/high efficiency
RF7 1131 (300) 10.3 (150) Tank top
Microglass III media
• Visual and electrical indicators ILP, RFP 452 (120) 13.8 (200) Inline, In-tank
with several connector styles BGTS 2400 (640) 10.3 (150) Return in-tank
• Flange options for low profile,
easy mounting
Medium Pressure
www.parker.com/hyd/filtermed Model Max Flow Max Pressure Mounting
LPM (GPM) Bar (PSI) Style
15CN 94 (25) 69 (1000) Inline
40CN 302 (80) 69 (1000) Inline
80CN 452 (120) 69 (1000) Inline
MPD 581 (150) 82 (1200) Duplex
IL8 1609 (425) 34.5 (500) Inline, duplex, quadplex
60
Filtration Fluid Analysis & Conditioning
Portable/Offline Systems
www.parker.com/hyd/guardian
www.parker.com/hyd/filtercart
www.parker.com/hyd/pvs
• Provide flexibility for removing • Choice of two filter carts:
contaminants from hydraulic fluid – 18 LPM (5 GPM) flow;
• Guardian hand-held purification 1892 LPM (500 GPM)
Guardian SUS max; ¹⁄₂ HP motor
system with 15 LPM (4 GPM)
flow rate – 37 LPM (10 GPM) flow;
• Choice of five portable purifica- 11,356 LPM (3000 GPM)
tion systems including 18, 37, 75, SUS max; ³⁄₄ HP motor
113 and 170 LPM (5, 10, 20, 30
and 45 GPM) flow rates
PVS
Filtercart
Par Gel
www.parker.com/hyd/pargel
• Water removal elements filter
“free” water from mineral-base
and synthetic fluids
• Fits many Parker filters and the
Guardian filtration system
Par-Fit Elements
www.parker.com/hyd/parfit
• Extensive range of competitively • Provides proven Parker
priced Parker quality replacement performance in competitive
filter elements for any filter brand filter housings
• Over 6500 competitive inter-
change listings help consolidate
vendor base by allowing users to
acquire all replacement elements
from one source
Reservoir Accessories
www.parker.com/hyd/resacc
• Metallic and non-metallic • Diffusers
breathers and filler breathers • Fluid level/temperature gauges
• Triceptor™ desiccant breathers • Suction strainers
• Spin-on breathers
61
Fluid Analysis & Conditioning Filtration
Laser CM (LCM) The LCM laser particle counter is • On-line sampling up to 414 Bar
www.parker.com/hyd/LCM designed primarily for on-line (6000 PSI)
particle counting with a user- • RS232 serial port with data stor-
programmable automatic count age capacity up to 300 tests
feature with data storage for • Integral printer with data graph-
continuous monitoring. Additional ing and Windows-based software
features include:
• Particle count test cycle in
2 minutes reported in ISO
or NAS format
MS100 Moisture Sensor The MS100 Moisture Sensor • Simple LED’s provide local
www.parker.com/hyd/ms100 provides a compact, real-time Go/No-Go indication
solution to continuous water con- • Panel meter for local or remote
tamination monitoring. Designed display reports 0–100% saturation
to work well in petroleum/syn- • Meter scale is color coded for
thetic hydraulic and lubricating positive/easy identification
oil applications.
• 0–10 VDC analog and
120 VAC logic output
62
Rubber Hose Products Fluid Connectors
Nobody offers more hose and fit- With a wide variety of inner tubes,
tings in more variations than Parker. reinforcement and cover combina-
With over 750 end configurations, tions to meet your specific applica-
our yellow zinc-dichromate coated tion requirements, our hoses range
steel and our brass and stainless in size from ¹⁄₄" to 3" I.D. and have
fittings include: o-ring face seal, the same reputation for quality as
flare, straight thread, male pipe and our fittings do.
metric designs in both crimp and
field-attachable styles. All have
been tested and approved to meet
stringent worldwide standards such
as SAE, ISO, and DIN.
Low Pressure
Pneumatic, specialty, air condition- hoses, Parker manufactures Push-
ing, and heavy duty truck/mobile Lok hoses. They assemble in
equipment hose make up the bulk of seconds, without the need for
the low pressure market. In addition clamps and bands, using Parker 82
to diesel engine and return line Series fittings.
Medium Pressure
From SAE 100R1 and 100R2 to to meet or exceed your medium
compact and abrasion-resistant one pressure needs. Parker’s 43 Series
and two-wire braided hose, Parker fittings provide a broad offering of
offers a high performance product configurations and connection sizes.
High Pressure
The combination of Parker’s high utmost in leak protection. Abra-
pressure, spiral-reinforced no-skive sion-resistant covers and high nitrile
hoses, coupled with Monoblok™ inner tubes enhance many high
one-piece fittings, provides the pressure hoses in this category.
63
Fluid Connectors Thermoplastic Products
Thermoplastic Hydraulic,
Pneumatic and Hybrid Hose
• Low pressure: below 1000 PSI
• Medium pressure: 1000–3000 PSI
• High pressure: above 3000 PSI
• Specialty hose
64
Brass Products Fluid Connectors
Manifolds
• Multiple connections • Push-to-connect ports
• Composite body • Meets D.O.T. specifications
• Lightweight
Hose Barbs
• All brass construction • Viton O-ring standard
• SAE straight threads • Compact forged shapes
• Metric threads • Use with hose clamp
Ball Valves
• Available in brass, carbon steel, • Various handle options
stainless steel • Full flow available
• Sizes from ¹⁄₈"–3" • NPT, SAE straight threads, ISO
• Pressures from 200 – 6,000 PSI 6149 ports, BSPP threads
Pipe Fittings
• SAE standards • Threads made to dryseal
• Large range of sizes and styles standards
• Pre-applied sealant available • Extrusions and forgings available
Vibra-Lok
• Excellent vibration resistance • Simple to assemble
• Viton sleeve for higher • NPTF threads and SAE straight
temperatures threads standard
• Used with wide range of tubing • Optional threads available
65
Fluid Connectors Quick Couplings
CV
Check Valves
Check valves are available in • Standard inline configuration
several configurations, so they can • Sizes from ¹⁄₄" to 1-¹⁄₄"
be easily adapted to nearly any • Pressures to 5000 PSI
hydraulic application. Parker check
valves offer several unique features • Crack pressures:
that will ensure years of trouble- 5–200 PSI
DT
free operation.
66
Tube Fittings Fluid Connectors
68
Sales Offices
69
Action Directory
Parker Hannifin wants to keep you informed about For detailed product information Right Now!
Parker Hydraulics. Listed below are connection oppor- Use the enclosed:
tunities for you to resource additional information or One-click Zip URLs CD Codes
speak directly with the industry’s most knowledgeable
hydraulic valve professionals.
To order literature or locate a distributor by phone T Series Single
call 1800 C-PARKER (272-7537). www.parker.com/hyd/pfysingle
www.parker.com/mobilesystems
or call 847-821-1500.
“inPHorm” is an easy to
Bulletin
use product selection guide HY19-1004/US
that helps you choose the Bulletin
HY01-1000/US
correct Parker part for
your application. To obtain Parker also has Solution Guides available for the
this free CD, email Truck and Industrial markets, each paired with an
inPHorm@parker.com. interactive CD. To obtain call 800-CPARKER.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributor. This offer and its accepteance
are governed by the provisions stated in the detailed "Offer of Sale" elsewhere in this document.
70
CD Catalog
System Requirements • Search takes you to the search feature. When the
To view the CD, the following are required: search window opens, type a word(s) or code* and
• Pentium®-class processor press enter. A list of pages where that word appears
is shown. Select one and click the View button.
• Win® 95 OSR 2.0, Win 98 Sec. Ed., Win ME,
Repeat as needed.
Win NT 4.0 (with Service Pack 5 or 6), Win 2000
or Win XP • Contents takes you to the selection of catalogs and
products on the CD.
• 16 MB of RAM (32 recommended)
• Product Overview takes you to a .pdf file of this
• 20 MB of available hard-disk space
Mobile Hydraulics Product Range.
Acrobat Reader • Warning/Offer of Sale takes you to these legal
Catalog files are viewed using Adobe Acrobat Reader. documents.
If you do not have Acrobat Reader installed on your • Getting Started provides a summary of how to
PC, it will install from the CD. If you have Acrobat navigate using Acrobat Reader.
Reader but do not have the search plug-in, you will be • Contact Us provides you with phone, fax and
given the option to install Acrobat Reader 6.0 online information.
with search.
Text links are easily identified by blue type. The
You must have the search plug-in to take advantage of the catalog files are fully bookmarked to make navigation
search feature described in the next section. quick and easy. Each catalog also has a bookmark
To View the CD which will take you to the Parker web home page for
The CD is self-loading. Just place it in your CD drive. that division if you are online while you are viewing
Acrobat Reader will open (or install), and the opening the CD. You must first enter your web browser
page will appear on your monitor. From this page you information into the Acrobat preferences.
can navigate to the following sections. Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
Windows is a registered trademark of Microsoft Corp.
71
Parker Hannifin Corporation Bulletin HY19-1001/US
Hydraulics Group 10M 8/07 GL
595 Schelter Road
Lincolnshire, IL 60069
Tel: 847-821-1500
Fax: 847-821-7600
www.parker.com/mobilesystems
72