You are on page 1of 88

ordering information

What goes into a bushmaster®


is What makes it a bushmaster.
Hard-coated aluminum receivers Our highly efficient gas operating
are corrosion-proof, lightweight system delivers impeccably smooth,
and abrasion resistant. rapid cycling while significantly
reducing felt recoil.

All Bushmaster® barrels are


precision-machined from 4150
chrome moly-vanadium steel
and hardened to C26-33 on the
Rockwell scale for the utmost in Relentless testing with
accuracy and longevity. Barrels are
over 6 million rounds
also chrome lined for added fired each year.
corrosion resistance.

since 1978, the finest torture tested,


commercial ar-style battle proven
platform rifles in • Bushmaster® firearms and accessories undergo a
the World rigorous testing process to ensure the highest levels
• Bushmaster® is the leading supplier of AR-style rifles of ruggedness, longevity and precision
and accessories in the U.S. • Proved by 32 years of experience in law enforcement,
• Preferred choice of domestic, state and local foreign military service, competitive shooting and
law enforcement hunting worldwide
• Serving law-enforcement agencies and militaries
of more than 50 foreign nations consistency, accuracy
• A leading choice for competitive and recreational and quality control
shooters and hunters • Every Bushmaster® component is scrutinized and
precision-tuned to deliver unmatched accuracy
• Bushmaster® barrels are made exclusively from fine
4150 chrome moly-vanadium steel
• Unmatched quality control with the most stringent
series of inspections in the industry

2 phone orders: 1.800.998.7928


ANY PROBLEM,
ONE SOLUTION.

BUShMASTER® ACRTM TABLE Of CONTENTS


(AdAPTIvE COMBAT RIfLE). ACR™ .................................................................4
ThE wORLd’S MOST AdAPTIvE Large Bore Rifles...................................................6
MOdULAR RIfLE. Hunting Rifles.......................................................7
• The first of its kind, and designed to master Patrolman Rifles .................................................10
the extreme scenarios faced in the world of MOE™ Series Rifles ............................................12
law enforcement and personal defense
Competition Rifles ...............................................16
• Redefines the term “modular” with the extra­ Law Enforcement Rifles........................................19
ordinary ability to change calibers, barrel lengths
and stock configurations in minutes — without Price List............................................................20
the use of any tools Receivers ...........................................................22
• Born of a collaborative effort between Bushmaster,® Barrel Assemblies................................................27
Magpul® and Remington® to create the ultimate Muzzle Brakes ...................................................37
military combat weapons system Magazines .........................................................39
• Built specifically for law enforcement and Pistol Grips and Buttstocks ...................................45
tactical markets Hand Guards and Accessories ................................53
• Tested in the most brutal conditions on earth Gunsmithing Accessories ......................................56
• Now available in State Compliant, ORC, Sights, Scopes and Mounts ..................................67
Basic Folder, Enhanced and LE Apparel .............................................................82

www.BUShMASTER.COM 3
Bushmaster® aCrtm adaptive ComBat rifles
as mission-adaptaBle as the
professionals it’s Built to serve.

Bushmaster® ACRTM Basic ORC


(ACR SS 16M40RC B) (90836) Black
(ACR SS 16M40RC C) (90837) Coyote

Bushmaster® ACRTM A-TACS® Basic


(ACR SS 16M4 A) (90820)

one rifle for an infinite numBer


of extreme sCenarios
orC & BasiC aCrtm features
• 16 ½" cold hammer-forged barrel with melonite • Fully ambidextrous controls including magazine
coating for extreme long life release, bolt catch and release, fire selector and
• A2 birdcage-type hider to control muzzle flash non-reciprocating charging handle
• Adjustable, two-position, gas piston-driven system • High-impact composite hand guard with heat
for firing suppressed or unsuppressed, supported by shield — accepts rail inserts
hardened internal bearing rails • High-impact composite lower receiver with
• Tool-less, quick-change barrel system available in textured magazine well and modular grip storage
10.5", 14.5" and 16.5" and in multiple calibers • Fixed high-impact composite A-frame stock with rub-
• Multi-caliber bolt carrier assembly quickly and easily ber butt pad and sling mounts (ORC & A-TACS®)
changes from 223/5.56mm NATO to 6.8mm Rem • Folding and six-position telescoping high-impact
SPC (spec II chamber) polymer stock with rubber butt pad and sling
• Free-floating MIL-STD 1913 monolithic top rail for mount (basic folder only)
optic mounting • Magpul® MBUS front/rear flip sights (basic only)
• Ships in oversized hard case for accessory
storage, includes 30-round PMAG™

4 phone orders: 1.800.998.7928


Bushmaster® State-Compliant ACR™
(ACR SS 16M4 BP) (90720)
State-compliant acR™ FeatuReS

ptive CombAt Rifles


• Permanently pinned and welded Izzy • Free-floating MIL-STD 1913 monolithic top rail
muzzle brake for optic mounting
• Tool-less quick change-over barrel system • Two-point push-button sling front
available in multiple calibers

Bushmaster® Basic ACR™ Folder


(ACR SS 16M4BF B) (90838) Black
(ACR SS 16M4BF C) (90847) Coyote
• Folding and six-position telescoping
high-impact polymer stock with rubber butt
pad and sling mounts

Bushmaster® ACR™ Enhanced Configuration


(ACR FR 16M4 B) (90704)

AdAptive
Bushmaster® ACR™ Enhanced
Configuration
(ACR FR 16M4 C) (90705)
enhanced acR tm
FeatuReS
All the attributes of the basic ACR with these

• Folding and six-position telescoping
additional features: high-impact polymer stock with rubber
• AAC® blackout flash hider with exceptional butt pad and sling mounts
signature reduction • Two-point push-button sling front
• Three-sided aluminum hand guard with integral Complete listing of ACRTM parts
and accessories section on page 46.
MIL-STD 1913 rail for accessory mounting

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
ACR SS 16M4 BP 5.56mm/223 Rem. 8.2 lbs. 35" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,343
ACR SS 16M4 A 5.56mm/223 Rem. 8.2 lbs. 35" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,540
ACR FR 16M4 B 5.56mm/223 Rem. 8.2 lbs. 33"-36" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,699
ACR FR 16M4 C 5.56mm/223 Rem. 8.2 lbs. 35" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,699
ACR SS 16M4BF B 5.56mm/223 Rem. 8.2 lbs. 33"-36" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,490
ACR SS 16M4BF C 5.56mm/223 Rem. 8.2 lbs. 33"-36" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,490
ACR SS 16M4ORC B 5.56mm/223 Rem. 8.0 lbs. 35" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,343
ACR SS 16M4ORC C 5.56mm/223 Rem. 8.0 lbs. 35" 16.5" ½ x 28 4150 chrome-moly steel w/melonite-coated bore/chamber $2,343
www.buShmaSteR.com 5
Large BOre

The BushmasTer ® Ba50.


mOnsTrOus LOng-range pOwer meeTs LOng-range accuracy.

Bushmaster® BA50 Carbine


(BCW3M 22-50BMGLW) (90101)

Bushmaster® BA50 Rifle


(BCW3M 30-50BMGLW) (90102)

• Rifle (30" barrel) and carbine (22" barrel) versions • MIL-STD 1913 rail at 12 o’clock position on
• Rate of twist: 1 in 15" vented fore-end
• Barrel free-floated within vented fore-end • Lower receiver machined from T6-6061
aluminum billet
• Bolt action: bolt is on left side of receiver
• Steel bipod with folding legs
• Magpul® PRS adjustable buttstock with LimbSaver®
recoil pad • ErgoGrip Deluxe Tactical pistol grip
• High-efficiency recoil-reducing brake minimizes rearward • Manganese phosphate finish on steel parts
force comparable to 243 Win • Hard anodized black finish on aluminum parts
• Disassembles like an AR-type rifle for cleaning (mil. spec.)
and maintenance • Shipped with Storm hard case and two
10-round magazines

Big-BOre pOwer wiTh The speed and versaTiLiTy


Of ar-sTyLe rifLe.

450 Bushmaster® Rifle (shown)


(BCWVMS 20-45) (90431)
450 Bushmaster® Carbine
(BCWVMS 16-45) (90425)
• 20" barrel rifle or 16" barrel carbine with 1 in 24" twist • Izzy muzzle brake and gas-impingement system
• Upper and lower receivers made of mil. spec. aluminum reduce recoil to a moderate thump for optimum
multiple-shot control
• Barrels free-floated within fore-ends for peak accuracy
• Shipped with hard case, yellow safety block,
5-round magazine and manual

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCW3M 22-50BMGLW 50 BMG 30 lbs. 50" 22" 1"-14UNS-ZA Lothar Walther barrel, free-floating with vented fore-end $5,262
BCW3M 30-50BMGLW 50 BMG 30 lbs. 58" 30" 1"-14UNS-ZA Lothar Walther barrel, free-floating with vented fore-end $5,299
BCWVMS 20-45 450 Bushmaster 8.3 lbs. 39.5" 20" 11/16 x 24 4150 chrome-moly steel w/coated bore/chamber $1,441
BCWVMS 16-45 450 Bushmaster 8.1 lbs. 35.5" 16" 11/16 x 24 4150 chrome-moly steel w/coated bore/chamber $1,426
6 phOne
OrdersOrders: 1.800.998.7928
24 hOurs: 1.800.998.7928
308 HUNTING

308 hunter and 308 vista hunter.


Available in Camo

large bore/308 hunting


Bushmaster® 308 Hunter Rifle
(BCWVMS 30820F Hunter) (90821)

Bushmaster® 308 Vista Rifle


(BCWVMS 30820F Vista) (90822)

• 20" fluted 4150 chrome moly-vanadium • Standard A2 stock


barrel with crowned muzzle • Two ¾" mini-risers for optics mounting
• Mid-length gas system for smoother recoil • MOE™ trigger guard for gloved finger
• Free-floating, vented aluminum fore-end • Ships in lockable hard case, operator’s
• Hogue® rubberized pistol grip safety manual and 5-round magazine
• A2 grip on Vista

308 orc rIfle. for sHooTers wHo INTeNd To


ImmedIaTely add THIrd-parTy opTIcs.

Bushmaster® 308 ORC


(BCWVMF 30816ORCE) (90702)

• Caliber — 308 Win/7.62 NATO 18" • Heavy oval hand guards


heavy profile with mid-length gas system • Six-position telescoping stock – reduces
and A2 birdcage flash hider overall length by 4" when collapsed for
• Receiver length Picatinny optics rail with convenient carry
two ½" optics risers • Shipped in a lockable hard case with
• Milled gas block operator’s safety manual, 20-round
magazine and yellow safety block

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWVMS 30820F Hunter 308 WIN./7.62 NATO 8.2 lbs. 35" 16.5" 5/8 x 24 Chrome-moly steel w/coated bore/chamber $1,518
BCWVMS 30820F Vista 308 WIN./7.62 NATO 8.2 lbs. 35" 16.5" 5/8 x 24 Chrome-moly steel w/coated bore/chamber $1,618
BCWVMF 30816ORCE 308 WIN./7.62 NATO 7.75 lbs. 37.25" 16" 5/8 x 24 Chrome-moly steel w/coated bore/chamber $1,418
www.bUsHmasTer.com 7
Bushmaster® Predator rifles

Bushmaster® Predator Rifle


(PCWVMS 20FPRED8) (90629)

a slightly shorter, lighter Bushmaster ® — the quickest,


most deadly Predator in the food chain.

• 20" Bushmaster® barrel is fluted 4150 chrome moly- • Vented tubular aluminum free-floater fore-end with
vanadium steel (non-chrome-lined) with sharp 1 x 8" bipod stud
twist rifling for the heavier bullets typically used on bigger • Hogue® rubberized pistol grip
varmints and predators
• 5-round magazine (legal for hunting in most states)
• Features include a hybrid SAAMI spec. chamber
• Shipped with safety bock and operator’s manual in a
• Two-stage competition trigger (3 ½-lb. takeup, lockable, foam-padded hard case
1-lb. letoff)

Bushmaster® a-tacs® Predator rifles

Bushmaster® A-TACS® Predator Rifle


(PCWVMS 20FPRED8 A) (90823)

• Coated in A-TACS® digital camouflage for superior • Two-stage competition trigger (3 ½-lb. takeup,
concealment 1-lb. letoff)
• Fluted 20" extra-heavy Bushmaster® predator barrel • Shipped with 5-round magazine and manual
(1" dia. out to gas block) with 11" competition in a lockable, foam-padded hard case
muzzle crown
• 1 in 8" twist (non-chrome-lined) for the heavier bullets,
free-floated with a vented aluminum fore-end

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
PCWVMS 20FPRED8 5.56mm/223 Rem. 8 lbs. 38.25" 20" Crowned Fluted, chrome-moly steel (non-chrome-lined) $1,359
PCWVMS 20FPRED8 A 5.56mm/223 Rem. 8 lbs. 38.25" 20" Crowned Fluted, chrome-moly steel (non-chrome-lined) $1,459
8 Phone orders: 1.800.998.7928
Bushmaster® Varminter rifle

Bushmaster® Varminter Rifle


(PCWVMS 24FVAR9) (90641)

extended-range accuracy, rapid follow-ups,


light recoil and Bushmaster ® reliaBility —
Built specifically for Varmint hunters.

• 24" extra-heavy Bushmaster® varmint • Fluted barrel (non-chrome-lined) with a

223 HUNTING
barrel (1" dia. out to gas block) with 11° 1-in-9" rate of twist is free-floated within
competition crowned muzzle the vented fore-end
• Shipped with hard case, 5-round magazine • Competition two-stage trigger
and manual (3 ½-lb. takeup, 1-lb. letoff)

Bushmaster® a-tacs® Varminter rifle

Bushmaster® A-TACS® Varminter Rifle


(PCWVMS 24FVAR9 A) (90824)

• Coated in A-TACS® digital camouflage for • Two-stage competition trigger


superior concealment (3 ½-lb. takeup, 1-lb. letoff)
• Fluted 24" extra-heavy Bushmaster® varmint • Shipped with hard case, 5-round magazine
barrel (1" dia. out to gas block) with 11° and manual
competition muzzle crown
• 1-in-9" twist (non-chrome-lined) free-floated
with a vented aluminum fore-end

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
PCWVMS 24FVAR9 5.56mm/223 Rem. 8.4 lbs. 42.25" 24" Crowned Fluted, extra heavy profile/chrome-moly steel $1,374
PCWVMS 24FVAR9 A 5.56mm/223 Rem. 8.4 lbs. 42.25" 24" Crowned Chrome-moly steel w/coated bore/chamber $1,474
www.Bushmaster.com 9
M4-Type paTrolMan’s Carbines

M4 Type Patrolman’s Carbine (shown)


(BCWA3F 16M4) (90289)

M4 Type Patrolman’s Carbine


(BCWA2F 16M4) (90216)

ouT on paTrol, aT The range or even aT hoMe.


versaTiliTy for all of The above.

• 16" barrel is chrome-lined in both bore and chamber • A2 (fixed handle) features 1 MOA elevation and
• Features A2 birdcage-type suppressor to control ½ MOA windage adjustments
muzzle flash • A3 (removable handle) features ½ MOA
• Six-position telestock for light weight and quick handling elevation and ½ MOA windage adjustments

6.8MM spC & 7.62 x 39MM Carbines

6.8mm SPC Caliber (A3 – Removable Handle)


Rifle with Telestock (shown)
(BCWA3F 16M468) (90298)

7.62 x 39mm (A3 – Removable Handle)


Rifle with Telestock
(BCWA3F 16M439) (90297)
a powerful arguMenT
for versaTiliTy of The ar plaTforM.
• 6.8mm SPC (Special Purpose Cartridge) delivers the • 16" M4 profile barrel fitted with Izzy
added power and improved terminal energy of a 270 muzzle brake
cal.; over 2600 FPS velocity with 115-gr. bullets • Six-position telestock standard.
• 7.62 x 39mm delivers the added power and similar Other options available
performance of a 30-30 cal.; over 2300 FPS velocity • Shipped with hard case, sling, 26-round
with 122-gr. bullets magazine and manual

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 16M4 5.56mm/223 Rem. 6.7 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $1,224
BCWA2F 16M4 5.56mm/223 Rem. 6.7 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $1,150
BCWA3F 16M468 6.8mm SPC 6.57 lbs. 32.75" 16" 5/8 x 24 4150 chrome-moly steel w/chrome-lined bore/chamber $1,314
BCWA3F 16M439 7.62 x 39mm 6.57 lbs. 32.75" 16" 5/8 x 24 4150 chrome-moly steel w/chrome-lined bore/chamber $1,314
10 phone orders: 1.800.998.7928
quad rail patrolman’s carbine

Quad Rail A3
(BCWA3F 16M4 QR) (90831)

PATROLMAN’s cARbiNes
Quad Rail A2
(BCWA2F 16M4 QR) (90830)

• 16" 4150 chrome moly-vanadium barrel is • Six-position telestock for light weight and quick
chrome-lined in both bore and chamber with handling
A2 birdcage-type suppressor free-float quad • Ships with a lockable hard case, operator
rail fore-end safety manual, yellow safety block, sling and
• Free-float quad rail fore-end increases 30-round magazine
accuracy and enables accessory mounting

orc® carbines

ORC Carbine with Telestock


(BCWVMF 16M4ORC) (90391)

any optics, any purpose, anywhere.


the bushmaster ® orc ® (optics ready carbine).
• 16" M4 profile barrel is chrome-lined in both • Bushmaster® front flip-up sight can be mounted
bore and chamber over the milled gas block
• A2 (fixed handle) birdcage suppressor • Features heavy oval M4-type handguards
• Receiver-length Picatinny optics rail featuring • Six-position telestock reduces overall length by
two ½" optics riser blocks 4" when fully collapsed

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 16M4 QR 5.56mm/223 Rem. 8.2 lbs. 35" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $1,336
BCWA2F 16M4 QR 5.56mm/223 Rem. 8.2 lbs. 35" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $1,262
BCWVMF 16M4ORC 5.56mm/223 Rem 6 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $1,068
www.bushmaster.com 11
mOeTm m4-Type cARbiNe

Black
(BCWA3F 16M4 MOE) (90291)

Flat Dark Earth


(BCWA3F 16M4 MOED) (90687)

MOE™ A-TACS® Carbine OD Green


(BCWA3F 16M4 MOEA) (90826) (BCWA3F 16M4 MOEG) (90688)

The NO. 1 AR-STyle plATfORm


iN AmeRicA, eNhANced wiTh
mAgpul ® equipmeNT.
• 16" barrel is chrome lined in both bore and chamber
• Magpul® MBUS rear flip sight • Magpul® MOE™ pistol grip accepts MIAD storage cores;
• Magpul® MOE™ adjustable buttstock with strong 30-round PMAG™
A-frame design and rubber buttplate • Available in Black, OD Green, Flat Dark Earth and A-TACS®

mOeTm gAS piSTON cARbiNe

Flat Dark Earth


(BCWA3F 16M4 GP MOED) (90843)
MOE™ Gas Piston Carbine
(BCWA3F 16M4 GP MOE) (90825) OD Green
(BCWA3F 16M4 GP MOEG) (90844)

• 16" barrel is chrome-lined in both bore and chamber • Magpul® MOE™ adjustable stock with strong A-frame
with gas piston system design and rubber butt pad
• Magpul® MOE™ carbine handguard fits over gas piston • Magpul® MOE™ pistol grip, accepts MIAD storage cores
system and accepts rail sections • 30-round PMAG™ in Black (all SKUs)
• Magpul® MBUS rear flip sight • Available in Black, OD Green and Flat Dark Earth
• Magpul® MOE vertical grip

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 16M4 MOE 5.56mm/223 Rem. 6.42 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16M4 MOED 5.56mm/223 Rem. 6.42 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16M4 MOEG 5.56mm/223 Rem. 6.42 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16M4 MOEA 5.56mm/223 Rem. 6.42 lbs. 35.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,347
BCWA3F 16M4 GP MOE 5.56mm/223 Rem. 6.22 lbs. 35.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,396
BCWA3F 16M4 GP MOED 5.56mm/223 Rem. 6.22 lbs. 35.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,396
BCWA3F 16M4 GP MOEG 5.56mm/223 Rem. 6.22 lbs. 35.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,396

12 phONe ORdeRS: 1.800.998.7928


MOETM Mid-lEngTh

modular carbine / moe™ series


Flat Dark Earth (BCWA3F 16M4 ML MOED) (90839)

16" MOE™ MID-LENGTH BLACK


(BCWA3F 16M4 ML MOE) (90827)
OD Green (BCWA3F 16M4 ML MOEOD) (90840)
• 16" barrel is chrome-lined in both bore and • Magpul® MOE™ pistol grip, accepts MIAD
chamber storage cores
• Mid-length gas system for smoother recoil • Magpul® MOE™ vertical grip
• Magpul® MOE™ mid-length handguard, • Available in Black, Flat Dark Earth and
accepts rail sections OD Green
• Magpul® MBUS rear flip sight • Ships with a lockable hard case, operator
• Magpul® MOE™ adjustable stock with strong safety manual, yellow safety block sling and
A-design and rubber butt pad 30-round PMAG™ in Black (all SKUs)

MOETM 308 Mid-lEngTh

Flat Dark Earth


(BCWA3F 30816 ML MOED)
(90841)
16" MOE™ 308 OD Green
(BCWA3F 30816 ML MOE) (90828) (BCWA3F 30816 ML MOEG)
(90842)
• 308 Win./7.62 NATO 16" heavy profile • Magpul® ACS adjustable stock storage
barrel with chrome-lined bore and chamber compartments and rubber butt pad
• Mid-length gas system for smoother recoil • Magpul® MOE™ vertical grip
• Magpul® MOE™ handguard, accepts rail • 20-round MAG™ in Black (all SKUs)
sections • Available in Black, Flat Dark Earth and OD Green
• Magpul® MBUS rear flip sight • Ships with a lockable hard case, operator
• Magpul® MOE™ pistol grip, accepts MIAD safety manual, yellow safety block, sling and
storage cores 30-round PMAG™ in Black (all SKUs)

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 16M4 ML MOE 5.56mm/223 Rem. 5.9 lbs. 32-7/8" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16M4 ML MOED 5.56mm/223 Rem. 5.9 lbs. 32-7/8" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16M4 ML MOEOD 5.56mm/223 Rem. 5.9 lbs. 32-7/8" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 30816 ML MOE 308Win./7.62 Nato 6.10 lbs. 34" 16" 5/8 x 24 4150 chrome-moly steel w/coated bore/chamber $1,448
BCWA3F 30816 ML MOED 308Win./7.62 Nato 6.10 lbs. 34" 16" 5/8 x 24 4150 chrome-moly steel w/coated bore/chamber $1,448
BCWA3F 30816 ML MOEG 308Win./7.62 Nato 6.10 lbs. 34" 16" 5/8 x 24 4150 chrome-moly steel w/coated bore/chamber $1,448
www.bushMasTEr.cOM 13
MOE™ dissipatOr

Flat Dark Earth


(BCWA3F 16D MOED) (90845)

MOE™ Dissipator
(BCWA3F 16D MOE) (90829) OD Green
(BCWA3F 16D MOEG) (90846)

• 16" heavy profile barrel with chrome-lined bore and • Magpul® MOE™ pistol grip, accepts MIAD
chamber, rifle length sight radius storage cores
• Mid-length gas system for smoother recoil • Magpul® MOE™ vertical grip
• Magpul® MOE™ rifle length handguard, accepts rail • Available in Black, Flat Dark Earth and OD Green
sections • Ships with a lockable hard case, operator safety
• Magpul® MBUS rear flip sight manual, yellow safety block, sling and 30-round
• Magpul® ACS adjustable stock storage compartments PMAG™ in Black (all SKUs)
and rubber butt pad

a.r.M.s. M4-typE carbinE

ARMS M4-Type Carbine with Telestock


(BCWA3F 16M4 ARMS) (90290)

this M4-typE givEs yOu frOnt and rEar flip


sights, allOwing fOr Optics and irOn sights in
thE saME carbinE.
• 16" barrel is chrome-lined in both bore • Magpul® MOE™ adjustable buttstock with
and chamber strong A-frame design and streamlined look;
• A.R.M.S. 41-B front flip sight and A.R.M.S. 40 rear flip 30-round PMAG™
sight for instant conversion to optics mounting • Hogue® pistol grip for non-slip handling

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 16D MOE 5.56mm/223 Rem. 6.42 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16D MOED 5.56mm/223 Rem. 6.42 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16D MOEG 5.56mm/223 Rem. 6.42 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,247
BCWA3F 16M4 ARMS 5.56mm/223 Rem. 6.22 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/coated bore/chamber $1,568
14 phOnE OrdErs: 1.800.998.7928
a-tacs® m4-type carbine

A-TACS® M4-Type Carbine with Telestock


(BCWA3F 16M4-ATAC) (90694)

MOE™ SERIES/EnhancEd M4
the no. 1 ar-style platform in america,
enhanced with magpul ® original equipment.
• 16" 4150 chrome moly-vanadium barrel is • Receiver-length Picatinny optics rail
chrome-lined in both bore and chamber • A.R.M.S.® 40L low profile flip-up rear sight
• Features A2 birdcage-type suppressor to • Shipped in a lockable hard case with operator's
control muzzle flash safety manual, 30-round magazine, yellow safety
• A-TACS® coated upper/lower receivers, stock, block and black web sling
pistol grip, delta ring and hand guards • One-year Bushmaster® warranty
• Six-position telestock for light weight and
quick handling

gas piston orc

Bushmaster® Gas Piston ORC


(BCWA3F 16M4 GP NS) (90805)

this gas piston carbine was developed for


shooters who intend to add 3rd-party optics.
• Ultra-reliable, cool-operating gas piston • Easy cleaning of hard chrome-plated piston;
operating system access via detented plug in the gas block
• Accepts wider range of ammunition; less • 16" 4150 chrome moly-vanadium barrel is
gas pressure required to operate chrome-lined in both bore and chamber with
• Offers improved reliability with cleaner A2 birdcage-type suppressor
operation and reduced recoil • Six-position adjustable telestock
• Prevents fouling of the upper receiver and • Shipped with hard case, yellow safety block,
bolt carrier sling, 30-round magazine and manual

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 16M4-ATAC 5.56mm/223 Rem. 6.22 lbs. 35.5" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined/chamber $1,336
BCWA3F 16M4 GP NS 5.56mm/223 Rem. 6.6 lbs. 32.5" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined/chamber $1,336
www.bushmaster.com 15
COMPETITION/CarbON 15
TaC-drIvINg ar-sTylE aCCuraCy, MIlITary-PrOvEN PErfOrMaNCE.

DCM-XR (A3 – Removable Handle)


(PCWA3S 20DCM8XR) (90581)
DCM-XR (A2 – Fixed Handle) (shown)
(PCWA2S 20DCM8XR) (90543)

• Heavy 1", match-grade, button-rifled barrels with • Competition front sight available in either .052" or
1-in-8" twist .062" widths
• Stay StraightTM dual aperture rear sight modified to • Two-stage competition trigger, factory set for a
accept four sizes 3.5-lb. first stage and a 1-lb. letoff, per CMP/NRA
competition regulations
• Buttstock features a 3.62-lb. lead
counterbalance weight • Shipped with hard case, sling, two 10-round
magazines and manual
aMazINg ar-sTylE aCCuraCy IN yOur ChOICE Of ThrEE barrEls.

20" (A3 – Removable Handle) 24" (A3 – Removable Handle) 20" (A3 – Removable Handle)
Chrome-Lined Barrel (shown) Chrome-Lined Barrel Stainless Steel Barrel
(BCWA3S 20) (90325) (BCWA3S 24) (90333) (BCWA3S 20SS) (90331)
20" (A2 – Fixed Handle) 24" (A2 – Fixed Handle) 20" (A2 – Fixed Handle)
Chrome-Lined Barrel Chrome-Lined Barrel Stainless Steel Barrel
(BCWA2S 20) (90242) (BCWA2S 24) (90247) (BCWA2S 20SS) (90246)

• A2 (fixed handle) upper receiver features a • A3 (removable handle) upper receiver features a
300-800 meter rear sight system (with 1 MOA Picatinny mounting rail for easy attachment of
elevation and ½ MOA windage adjustments) most accessory sights, scopes or optic devices
• A3 (removable handle) upper receiver has a • 4150 Chrome-moly steel barrels available
300-600 meter rear sight system with ½ MOA in 20" and 24" lengths
elevation and windage adjustments • Available with optional polished stainless
• Shipped with hard case, sling, 30-round magazine steel barrel
and manual

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
PCWA3S 20DCM8XR 5.56mm/223 Rem. 13.85 lbs. 38.5" 20" Crowned 1" diameter competition, chrome-moly vanadium steel $1,381
PCWA2S 20DCM8XR 5.56mm/223 Rem. 13.5 lbs. 38.5" 20" Crowned 1" diameter competition, chrome-moly vanadium steel $1,306
BCWA3S 20 5.56mm/223 Rem. 8.78 lbs. 39.5" 20" ½ x 28 Heavy profile chrome-lined bore/chamber $1,187
BCWA2S 20 5.56mm/223 Rem. 8.43 lbs. 39.5" 20" ½ x 28 Heavy profile chrome-lined bore/ chamber $1,112
BCWA3S 24 5.56mm/223 Rem. 9.29 lbs. 43.5" 24" ½ x 28 Heavy profile chrome-lined bore/chamber $1,202
BCWA2S 24 5.56mm/223 Rem. 8.93 lbs. 43.5" 24" ½ x 28 Heavy profile chrome-lined bore/chamber $1,127
BCWA3S 20SS 5.56mm/223 Rem. 8.78 lbs. 39.5" 20" ½ x 28 Polished 416 stainless steel $1,187
BCWA2S 20SS 5.56mm/223 Rem. 8.43 lbs. 39.5" 20" ½ x 28 Polished 416 stainless steel $1,112
16 PhONE OrdErs: 1.800.998.7928
Carbon 15 Flat-top Carbine
Comes with a Flat top and Flat out-perForms
other Carbines.

Carbon 15 “Flat-Top” Carbine


(AZ-C1516M4FT) (90728)

competition/carbon 15
Carbon 15 SuperLight ORC Optic
(MAZ-C1516SLORC) (90689)
• Durable Carbon 15 composite receivers are
an amazing 40% lighter than comparable • AR-type front sight; dual aperture flip-up
aircraft aluminum receivers; includes rear sight
Picatinny rail for simple optics mounting • SuperLight 16" threaded 1x9 barrel twist
• 16" M4 profile barrel chambered for • 4-position fiberite telestock
5.56mm/.223 Rem. is chrome-lined • Shipped with optic hard case, sling, 30-round
• Muzzle fitted with Izzy flash suppressor magazine and manual

bushmaster® pistols
For durability, reliability and outstanding
Control, there are no rivals.

Carbon 15 Type 21S Carbon 15 (9mm) Pistol Type 21S


(AZ-C15P21S) (90735) (AZ9-C15P21S) (90744)

Pit Viper Pistol Type AP21


(AP-21) (90711)

• Receivers and other parts are molded • Bolt carrier is black oxide finished; other critical
of super-durable, water-resistant steel parts are manganese phosphate finished
Carbon 15 composite for superior corrosion and rust protection
• Stainless steel match grade barrel includes • Picatinny optics rail with integral dual
an A2 birdcage flash suppressor aperture rear sight and an A2-type square
post front sight

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
AZ-C1516M4FT 5.56mm/223 Rem. 5.77 lbs. 32.75" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $905
MAZ-C1516SLORC 5.56mm/223 Rem. 5.50 lbs. 32.75" 16" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $820
AZ-C15P21S 5.56mm/223 Rem. 3.25 lbs. 20" 7.25" ½ x 28 416 match-grade stainless steel $845
AZ9-C15P21S 9mm 2.88 lbs. 20" 7.25" ½ x 36 416 match-grade stainless steel $845
AP-21 5.56mm/223 Rem. 3.49 lbs. 23" 7.25" ½ x 28 4150 chrome-moly steel w/chrome-lined bore/chamber $874
www.bushmaster.Com 17
ACRTM PATRol

ACRTM Patrol Carbine


(ACRPSS 16M4 B) (90723)

WiTh A 16 ½” Cold hAMMeR-foRged bARRel And AAC


blACkouT flAsh suPPRessoR, This Rifle is PeRfeCT foR
The lAW enfoRCeMenT PRofessionAl.

• AAC Blackout flash hider with exceptional signature re- • Tool-less quick-change barrel system available in
duction, compatible with AAC ratchet-mount suppressors 10.5", 14.5", 16.5" and in multiple calibers
• Adjustable, two-position, gas piston-driven system for fir- • Ships in nylon soft case for law enforcement
ing suppressed or unsuppressed, supported by hardened use, includes 2-point push button sling and three
internal bearing rails 30-round PMAGs

ACRTM sPeCiAl PuRPose

ACRTM Special Purpose Carbine


(ACRPFR 14M4 B) (90721)
(ACRPFR 16M4 B) (90722)

The six-PosiTion TelesCoPing sToCk And 14 ½" bARRel effeCTively


AdAPTs To The MulTiTude of dynAMiC TACTiCAl enviRonMenTs.
All the attributes of the ACRTM Patrol model with these additional features:
• 14 ½" and 16 ½"cold hammer-forged barrel with an • Ships in nylon soft case for law enforcement use,
innovative coating for extremely long life includes single point sling and three 30-round
• Folding and six-position telescoping high-impact polymer PMAG™ magazines
stock with rubber butt pad and sling mounts

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
ACRPSS 16M4 B 5.56mm/223 Rem. 8.2 lbs. 35" 16.5" ½ x 28 Chrome-moly steel w/coated bore/chamber POR
ACRPFR 14M4 B 5.56mm/223 Rem. 8.3 lbs. 32-35" 14.5" ½ x 28 Chrome-moly steel w/coated bore/chamber POR
ACRPFR 16M4 B 5.56mm/223 Rem. 8.3 lbs. 32-35" 14.5" ½ x 28 Chrome-moly steel w/coated bore/chamber POR
18 Phone oRdeRs: 1.800.998.7928
Law enforcement

M4A3 Carbine with Telestock


(BCWA3F 14M4) (90274)

whether defending freedom or enforcing Law,

law enforcement
the m4-type has proven reLiabLe for both.

• 14.5" barrel is chrome-lined in both bore • Six-position telescoping buttstock for light
and chamber weight and quick handling
• A2 birdcage flash suppressor to control • Shipped with hard case, sling, magazine
muzzle flash and rise and manual
• Available in A2 (fixed handle) or A3
(removable handle)

11.5" Barrel
(A3 – Removable Handle)
Entry Carbine
(BCWA3F 11.5) (90260)

compact and powerfuL, the 11.5" barreL works


hard even in tight quarters.

• 11.5" barrel is chrome-lined in both bore • Six-position telescoping buttstock for light
and chamber weight and quick handling
• A2 birdcage flash suppressor to control • Shipped with hard case, sling, magazine
muzzle flash and rise and manual
• Available in A2 (fixed handle) or
A3 (removable handle)

Order # Caliber Weight w/o Overall Barrel Muzzle Barrel MSRP


Magazine Length Length
BCWA3F 14M4 5.56mm/223 Rem. 6.22 lbs. 31" 14.5" ½ x 28 Chrome-moly steel w/chrome-lined bore/chamber POR
BCWA3F 11.5 5.56mm/223 Rem. 6.11 lbs. 28" 11.5" ½ x 28 Chrome-moly steel w/chrome-lined bore/chamber POR
www.bushmaster.com 19
PRICE LIST
AddITIonAL fIREARmS noT Shown LISTEd bELow
Order No. SAP# Description MSRP
AZ-C15P97S 90737 7.25" Carbon 15 Type 97S Pistol w/Stainless Steel $875
BCWA2F 16M468 90217 16" 6.8mm SPC Carbine - A2 $1,239
BCWA2F 11.5/5.5 90198 11.5" Carbine - A2 $1,135
BCWA3F 11.5/5.5 90262 11.5" Carbine - A3 $1,209
BCWA2F 14M4IZ 90207 14.5" M4A2 Type Carbine $1,150
BCWA3F 14M4IZ 90275 14.5" M4A3 Type Carbine $1,224
BCWA2F 16 90212 16" Heavy Barrel Carbine - A2 $1,135
BCWA3F 16 90280 16" Heavy Barrel Carbine - A3 $1,209
BCWA2F 16SL 90218 16" SuperLight Carbine - A2 $1,135
BCWA3F 16SL 90304 16" SuperLight Carbine - A3 $1,209
BCWA2F 16D 90213 16" “Dissipator” Carbine - A2 $1,150
BCWA3F 16D 90281 16" “Dissipator” Carbine - A3 $1,224
BCWVMF 16FMC 90386 16" Modular Carbine w/Telestock $1,680
PCWVMS 16 90611 16" V Match Carbine $1,150
PCWVMS 20AH 90626 20" V Match Rifle $1,165
PCWVMS 24AH 90639 24" V Match Rifle $1,180
PCWVMS 24-9SS 90636 24" Stainless Varmint Special $1,374
AZ-C15M4PRE 90732 14.5" Carbon 15 Model 4 Carbine $905
AZC-C15RM4FT 90751 16" Carbon 15 “Top Loading” Carbine $905
AZ9-C15R16FT 90747 16" Carbon 15 9mm Carbine $905
AZ-C15P97 90736 7.25" Carbon 15 Type 97 Pistol $800

Magazines
Order # Description Caliber Capacity Materials Packaging Each UPC# MSRP Qty Per Ctn.
F1001693 AR15 Magazine AR15 .223 Cal. / 5.56mm 5 Stainless steel Clampack 604206116932 $23.90 10
F1001691 AR15 Magazine AR15 .223 Cal. / 5.56mm 10 Stainless steel Clampack 604206116925 $23.90 10
F1001692 AR15 Magazine AR15 .223 Cal. / 5.56mm 20 Stainless steel Clampack 604206116918 $25.90 10
F1001690 AR15 Magazine AR15 .223 Cal. / 5.56mm 30 Stainless steel Clampack 604206116901 $25.90 10
F1009066 Magazine Coupler AR15 .223 Cal. / 5.56mm 30 Polymer Clampack 604206129635 $26.20 10
Tools | Tool Kits
Order # Multi-tool Caliber Details Materials Packaging Each UPC# MSRP Qty Per Ctn.
10 AR specific tool bits, carbon scrapper, dental pick,
— Multi-tool Any AR Rifle 3/16" pin punch, flat blade screwdriver on pocket clip, Machined Steel Box — $80.00 10
A2 front sight adjustment tool, 8/32 threaded end
F1001694 Field Repair Kit AR15 .223 Cal. / 5.56mm Includes: High breakage and loss items for AR15 — Clampack 604206116895 $35.90 10
F1009976 Emergency Survival Kit w/ Sight tool AR15 .223 Cal. / 5.56mm Packed in a belt mountable carrying case — Clampack 604206129376 $105.60 10
F1009116 Lost Parts Kit AR15 .223 Cal. / 5.56mm Most critical springs, detents, inserts, pins — Clampack 604206129383 $11.80 10
F1009887 Bolt Carrier Assembly (with Key Staked On) AR15 .223 Cal. / 5.56mm Complete bolt & bolt carrier assembly Chrome-lined Clampack 604206129390 $177.00 10
F1009935 Bolt Assembly (complete) AR15 .223 Cal. / 5.56mm Bolt, extractor assb., pins, gas rings, ejector assb. — Clampack 604206129406 $69.50 10
F1009693 Lower Receiver Parts Kit AR15 .223 Cal. / 5.56mm Everything necessary to completely build up lower — Clampack 604206129413 $73.40 10
F1009974 Charging Handle Assembly AR15 .223 Cal. / 5.56mm Precision machined with spring loaded latch installed 7075T6 anodized aircraft aluminum, mil. spec. finish Clampack 604206129420 $37.00 10
F1009069 Izzy Flash Suppressor (Compensator) AR15 .223 Cal. / 5.56mm 3 gas ports, ribbed, closed bottom Gun steel/manganese phosphate finished Clampack 604206129444 $46.00 10
F1009497 Armorer's Wrench (for Newest Model Telestocks) AR15 .223 Cal. / 5.56mm Hvy combo wrench for 6 position tele & bbl nut — Clampack 604206129499 $60.80 10
F1009055 Drift 4 piece Punch Set AR15 .223 Cal. / 5.56mm 1/16", 3/32", 1/8", 5/32" Steel Clampack 604206129505 $51.70 10
F1009325 Hand Guard Tool AR15 .223 Cal. / 5.56mm Helps remove AR15/M16 two-piece handguards — Clampack 604206129529 $33.60 10
F1009333 IMP1 Receiver Push Pin Tool AR15 .223 Cal. / 5.56mm For installation & removal of pivot & takedown pins Black nylon Clampack 604206129536 $11.30 10
F1009056 Competition Trigger AR15 .223 Cal. / 5.56mm 3 ½ lb.(1st Stage) and 1 lb. (2nd Stage) — Clampack 604206129581 $78.00 10
F1009033 Single Point Tactical Harness AR15 .223 Cal. / 5.56mm — — Clampack 604206129642 $67.50 10
F1009022 STRAC Grip AR15 .223 Cal. / 5.56mm — Advanced polymer Clampack 604206129659 $52.50 10
Scope Mounts
Order # Description Caliber Capacity Materials Packaging Each UPC# MSRP Qty Per Ctn.
— Tactical Scope Mounts AR15 .223 Cal. / 5.56mm — Z2 Alloy & Steel Clampack — $87.30 10
F1009397 B.M.A.S. Mini Scope Risers (½" riser) AR15 .223 Cal. / 5.56mm 1 ¼" long x ½" tall Anodized aircraft aluminum Clampack 604206129574 $99.00 10
F1009433 B.M.A.S. Rear Flip Sight (Clamp On) AR15 .223 Cal. / 5.56mm Flip-up auxiliary sight, ½ MOA windage adjustment Aircraft aluminum, black oxide finish Clampack 604206129550 $151.40 10
F1009472 B.M.A.S. Rear Flip Sight (Low Profile) AR15 .223 Cal. / 5.56mm Flip-up sight, thumb screw, stem Steel base, aluminum stem Clampack 604206129567 $148.00 10
F1009416 B.M.A.S. Front Flip Sight (For V Match Rifles & Carbines) AR15 .223 Cal. / 5.56mm Sight clamps around milled sight bases/gas blocks Anodized aircraft aluminum Clampack 604206129475 $138.00 10
Stocks|Grips|Handguards|Stock Assb.
Order # Multi-tool Caliber Details Materials Packaging Each UPC# MSRP Qty Per Ctn.
F1009487 Pistol Grip (A2) AR15 .223 Cal. / 5.56mm Standard A2 hollow grip Molded black plastic Clampack 604206129543 $24.80 10
F1009538 Telestocks Butt Pad AR15 .223 Cal. / 5.56mm Fits ribbed-style 6 position telestocks Black rubber Clampack 604206129482 $22.40 10
F1009360 Telestock Assembly (Original Style Fiberite) AR15 .223 Cal. / 5.56mm 4 position Fiberite with aluminum extrusion extension tube Clampack 604206129437 $124.00 10
F1009471 4-Rail Split Handguards (Carbine) AR15 .223 Cal. / 5.56mm Position placement is 12,3,6,9 o'clock Anodized aircraft aluminum Clampack 604206129468 $254.00 10
F1009477 Handguard Rails (carbine) AR15 .223 Cal. / 5.56mm Fits AR15/M16 handguards, placement 12 & 6 o'clock Anodized aircraft aluminum Clampack 604206129451 $67.00 10
Cleaning Kits
Order # Description Size & Container Packaging Each UPC MSRP Qty Per Ctn.
F1001695 AR Starter Kit 13.5" x 5.5" x 2.5" Clampack 604206116888 $65.80 10
F1008999 Universal Cleaning System w/Squeeg- e 6" x 7.5" x 4" Clampack 604206129918 $59.90 5
F1008998 Military Cleaning System w/Squeeg-e 6" x 7.5" x 4" Clampack 604206129925 $45.90 5
F1008997 Shotgun Cleaning System w/Squeeg-e 6" x 7.5" x 4" Clampack 604206129932 $37.90 5
F1008996 Rifle Cleaning System w/Squeeg-e 6" x 7.5" x 4" Clampack 604206129949 $37.90 5
F1008995 Pistol Cleaning System w/Squeeg-e 6" x 7.5" x 4" Clampack 604206129956 $41.90 5
Chemicals
Order # Description Size & Container Packaging Each UPC MSRP Qty Per Ctn.
F1008994 Bore Cleaner/Polish 4 oz. bottle Bottle 604206129963 $5.00 6
F1008993 Bore Cleaner/ Polish ½ oz. bottle Bottle 604206129970 $2.50 12
F1008992 Bore Rinse 4 oz. bottle Bottle 604206129987 $5.60 6
F1008991 Bore Rinse 1 oz. bottle Bottle 604206129994 $3.70 12
F1008990 Premium Lubricant 4 oz. bottle Bottle 604206130006 $6.90 6
F1008989 Premium Lubricant ½ oz. bottle Bottle 604206130013 $2.90 12

Ask our sales representative about state-compliant rifles.


Bushmaster® Packaged Parts & Accessories (dealer sales only).

20 PhonE oRdERS: 1.800.998.7928


ACCESSORIES

price list/accessories

www.buShmAStER.COm 21
Lower receivers

stripped Lower receivers


A rock-soLid, reLiAbLe bAse: • Build a Bushmaster rifle from the ground up with
bushmAster moduLAr Lower our stripped lower receiver housings
receiver
• Receivers and components some of the most reliable on the • Machined from highest quality aircraft aluminum forgings
market • Requires a Bushmaster complete lower receiver parts kit and
• Modular design makes part replacement/maintenance simple your choice of buttstock
• Available as complete assemblies or as stripped housings, with • Bushmaster offers a complete rifle build-up video,
or without buttstocks or you may also reference the U.S. government
M16A2 technical manual
Lower Receiver Assembly with Pistol Grip
(A LOW W/O STK) ............................................. $285.00 Stripped Lower for 5.56mm (9349102-S)............. $200.00
Available for Multi-Caliber Stripped Lower for Multi-Caliber (9349102-S-MUL) . $200.00
(A LOW W/O STK-MUL) ...................................... $285.00

cArbon
rbon 15
six position teLestock And stripped Lower receivers
pistoL Grip Lower receivers • Molded of carbon fiber, these units are lightweight,
• Complete lower unit with all Bushmaster components, ready to snap durable and cooler
onto your upper receiver • They are solid color throughout — no finish to wear through
• FFL is required for purchase, or order through • These are the same receivers we use on our “flat-top” carbine
your FFL dealer and others
* Note: Assemblies with telestocks may still be illegal in some • Standard AR parts (like our lower receiver parts kit) are ready
states. Check your state and country statutes to determine to drop right in
legality. Also available — lower assembly with ATF-approved
fixed length tele-style stock. C15 M4 Type Receiver (AZ15780) ...................... $200.00
Lower w/Telestock (A LOW TELEP) ....................... $370.00 C15 R21/97/97S Receiver (AZ15180) ............... $200.00
Available for Multi-Caliber (A LOW TELE-MUL).......... $370.00 C15 P21/97 Pistol Receiver (AZ15179) .............. $200.00
Lower w/Fixed Telestock (A LOW PERMX) ............. $370.00

trApdoor And skeLeton stock Lower receivers


• Available in solid A2 buttstock with trapdoor storage compartment or sleek, lightweight skeleton stock
• Skeleton stock features a rubber butt pad, neoprene foam sleeve over extension tube
and multiple mounting points for the Q.D. sling swivel (included)

5.56mm/.223 Caliber (A LOW STD) .................... $345.00


Available for Multi-caliber (A LOW STD-MUL) ........... $345.00
Lower w/Ace Skeleton Stock (A LOW Skeleton) ..... $425.00

*Note: FFL required for purchase of any lower receiver.

22 Phone orders: 1.800.998.7928


upper receivers

v mAtch (FlAt top)


BushmAster A1 upper receiver
upper receivers • The A3 “flat-top” with its Picatinny rail allows virtually unlimited
• This version includes an elevation adjustment mounting of scopes, sights and optics
• Forward assist assembly available in either “teardrop” type • Carefully machined from 7075T6 aircraft aluminum forgings and
button or round type is complete as shown with ejection port cover and forward assist
• Aircraft quality aluminum forgings are used for superior strength, V Match (Flat Top) Upper Receiver (VUR-M2) ......... $190.00
and they include integral cartridge case deflector
• Finish is a mil. spec., non-reflective hard anodized with a baked
on dry film lube coating inside to ensure long wear and smooth
carrier operation
Complete A1 Upper Receiver Assembly (A1UR-M2 ... $160.00 stripped v mAtch (FlAt top)
upper receiver
Stripped A1 Upper Receiver Assembly
(8448524-M2) ................................................. $125.00 • Fully machined and hard anodize finished aircraft quality
aluminum forging ready for assembly
• Requires ejection port cover assembly and forward assist
assembly for completion
Stripped V Match (Flat Top) Upper Receiver
(8448524-V-M2)............................................... $155.00
complete A2 upper receiver
• Forged of 707 aircraft aluminum, units are machined to meet or
exceed mil. spec.
• Hard anodized to a dark gray non-reflective finish
• Includes an Integral brass deflector and a baked-on dry film lube
coating inside for long wear and smooth carrier operation
• Charging handle not included
Complete A2 Upper Receiver (A2UR-M2) ............... $195.00

cArBon 15 molded
upper receivers
• Tough yet lightweight, these upper receivers are molded
of carbon fiber composite originally developed for the
BushmAster Aster A2 stripped aerospace industry
upper receiver • Impervious to corrosion, they are solid color throughout — no
• Fully machined, hard anodize finished forging is dry-lubed and surface finish to wear off
ready to assemble • Use these receivers to build the lightest AR-type rifle around; no
• Ready to assemble with top Bushmaster quality parts ejection port covers or forward-assist assemblies required
• Requires a rear sight, forward assist assembly and ejection port Carbon 15 Flat-Top Upper Receiver (AZ15747)........ $155.00
cover assembly for completion Carbon 15 Flat-Top Upper Receiver
Bushmaster A2 Stripped Upper Receiver w/Forward Assist & Dust Cover (AZ15747FADC) .... $190.00
(9349063-M2) ................................................. $125.00 Carbon 15 Pistol Upper Receiver (AZ15067) ............. $139.95

www.bushmaster.com 23
Lower receiver Parts & Kits

two-stage trigger griP


As used in our Predator/Varmint rifles
(TR-TS) ............................................................. $129.95
comPLete Lower receiver Xm15/ar15-tyPe/m16
Parts Kit emergency survivaL Kit
• Everything necessary to completely build up your lower receiver • Survival kit is packed in a belt mountable Olive Drab carrying
case
• Kits available with either AR15-Type or M16* components
(lower receiver and auto sear are not included) • Specify with part numbers below: A1 Type (round front sight
post) or A2 Type (square front sight post) and AR15-Type (AR)
AR15-Type Lower Parts Kit or M16 (M) parts
(ALOW KIT) ......................................................... $69.50 Survival Kit w/A1 Sight Tool
M16 Lower Parts Kit AR-15(AR EMERG A1) M-16(M EMERG A1).............. $63.95
(MLOW KIT) ........................................................ $69.50 Survival Kit w/A2 Sight Tool
*NOTE: M16 parts require FFL or MG Tax Stamp. M16 parts are AR-15(AR EMERG A2) M-16(M EMERG A2).............. $63.95
NOT legal for sale in California.
Note: M16 parts require an FFL or Form 4 for purchase.
Dcm comPetition
comPLete comPLete ar15-
Lower receiver tyPe sPare
Parts Kit Parts Kit
• Parts shown above plus our adjust- • One “super-kit” that will take
able two-stage competition trigger care of all your AR15-Type rifle’s
spare parts needs
AR15-Type Lower Parts Kit
Complete AR15-Type Spare Parts
(ALOWKITCOMP) ................................................ $170.95
Kit w/Rifle Buffer Spring
fieLD rePair Kit (ARPARTSKIT) .............. $39.50
• High breakage and loss items in a Complete AR15-Type Spare Parts
heavy zip-lock bag Kit w/Carbine Buffer Spring
AR-15 (A FIELD) .......... $31.95 (ARPARTSKIT-C) ............$39.50
M-16 (M FIELD) .......... $31.95 Note: If you have our fixed length
telestock, please choose the rifle
*NOTE: M16 parts are NOT legal for sale in California. buffer spring package.

Bushmaster Ba50 fieLD rePair Kit ar15-tyPe sPring


PacKage
• All necessary parts for emergency field repairs on the new
Bushmaster BA50 .50 BMG caliber rifle and carbine • Normal wear springs in the gun,
including the buffer spring
Bushmaster BA50 Field Repair Kit
Telestock Carbine
(BMG FIELD) ....................................................... $74.95
(A COMP SPR PKG-C) ............................................ $10.50
Lost Parts Kit for ar15-tyPe rifLe Standard A2 Solid Stock
• Contains all the most critical (A COMP SPR PKG)............................................... $10.50
springs, detents, inserts and pins
— will get your gun back to full
function in short order
Competition Trigger magPuL enhanceD
(CP-KIT) ..................... $13.50 aLuminum trigger
guarD for ar15-
Bushmaster tyPe/m16
receiver • Drop-in oversized trigger guard that
sPring replaces the standard plastic or metal type
PacKage • Made in U.S.A. Instructions included.
• Top quality Bushmaster (MAG015) $19.95
Spring Kit
(SM SPRING PACK) ................................................. $2.95
24 Phone orders: 1.800.998.7928
ar15-tyPe or M16* offset Pin
aMbidextrous safety seLector
• Adapts a Colt lower receiver
• Installs easily into your lower receiver (with large hole) to M16 forward assist type upper receiver
• For the M16 part, an FFL or a copy of your Form 4 is required with smaller hole
for sale Offset Pin
AR15-Type (MMT-0007K) ...................................... $36.95 (NES-06) .............................................................. $6.50
M16* (MMT-0006K)............................................ $36.95
*M16 parts are NOT legal in California. individuaL Lower receiver Parts
ar15-tyPe/M16 accu-wedge for Late ModeL coLt ar15-tyPes
• Accu-Wedge eliminates play • These are the hard-to-find parts for the late model Colts requiring
between upper and lower the larger .172" diameter hammer and trigger pins
receivers for a more solid feel Hammer (8448612-SCK) ...................................... $23.50
• Easily installed, no modifications required Trigger (8448592-SC) .......................................... $21.50
• Buffers the cycling system to reduce wear on the Disconnector (8448635-SC) .................................... $7.50
impacting surfaces Hammer or Trigger Pin (8448609 C) ........................ $3.50
Accu-Wedge (ACU1B) .............................................. $6.50 All 5 parts in a kit (AR COLT KIT) ............................. $53.95
aMbidextrous
Magazine reLease M16*a2 three
• Release magazines from either side of the receiver shot burst set
• Uses stock button and spring • Installation of this set in your
• Made in U.S.A. M16A1 machine gun will
Ambidextrous Magazine Release give you a “three-shot-burst”
capability as in the M16A2
(8448638-ambi) ................................................. $95.95
• An FFL is required for sale,
ar15-tyPe boLt reLease or a copy of your Form 4.
extension Not legal for installation in
• A finely machined aluminum lever to help high anything but a licensed machine gun.
power competitors get back on target faster M16 A2 Three Shot Burst Set
by keeping the forearm hand in place (3SHOT BURST KIT) .............................................. $63.95
(SSP-1) ..................................... $47.95

QuicK-PuLL taKedown M16* fuLL auto


Pin for carbon 15 sear
toP Loading carbine • Includes pivot pin, bushing and
• Makes opening the receivers of the spring
top loading carbine easier and faster • Note: An FFL or Tax Stamp is
Quick-Pull Takedown Pin required for purchase
(AZC-15120) ......................................................... $3.95 M16 Full Auto Sear
(8448595)......................................................... $31.95
exPandabLe tensioning Pin f for
aLL ar15-tyPe rifLes
• Designed to cure a loose fit ar15-tyPe or
between older upper and M16* “re-hab” Kit
lower receivers • Hammer, trigger, safety selector
Expandable Tensioning Pins and disconnector
(ARTP) ................................................................ $36.95 • M16 kit must be used in a Title
II receiver for legality – an FFL
anti-waLK Pins or Tax Stamp is required for sale
for xM15, ar15- For Semi-Auto AR15-Type
tyPe and M16 (A REHAB) ........................................................... $35.95
• Designed to prevent trigger or sear pin walkout under rapid fire For Full-Auto M16
conditions
(M REHAB) .......................................................... $35.95
Set of Two Pins with Circlips
*Note: M16 parts are NOT legal for sale in California.
(WE-002) ............................................................. $6.50
www.bushmaster.com 25
Lower receiver parts & kits
Note the differeNces* betweeN the correspoNdiNg parts iN each drawiNg.

AR15-Type Parts M16 Parts


Hammer with J pin 8558612-SK Hammer with J pin 8558612-K

Safety Selec-
Safety tor Lever
Selector 9381367
Note “closed” area Lever Note “closed” area
Trigger 9381367-S
Trigger
8448592-S 8448592

Disconnector Disconnector
9349114-S 8448635
Bolt Carrier Bolt Carrier
8448507-S 8448507

Individual Parts for Lower Receivers


Bolt Catch Assembly (A BCAT ASS) ............................... $6.50 Pivot Pin Detent (8448585) ........................................ $ .55
Bolt Catch (8448628) ............................................... $5.50 Pivot Pin Spring (8448586) ........................................ $ .55
Bolt Catch Spring (8448633) ...................................... $ .55 AR15-Type Safety Selector (9381367-S) .................... $10.95
Bolt Catch Plunge (8448634)...................................... $ .55 M16 Safety Selector* (9381367) ............................ $10.95
Bolt Catch Pin (MS16562-119) ................................... $ .55 Safety Detent (8448631) .......................................... $1.00
Buffer Detent (8448582) .......................................... $1.60 Safety Detent Spring (8448516) ................................. $ .85
Buffer Detent Spring (8448583) .................................. $ .55 Take Down Pin — Rear (8448584) ........................... $4.20
AR15-Type Disconnector (9349114-S) ......................... $5.95 Take Down Pin Detent (8448585) ............................... $ .55
M16 Disconnector* (8448635) .................................. $5.95 Take Down Pin Spring (8448586) ................................ $ .55
Disconnector Spring (8448594) ................................... $ .55 Trigger for M16* (8448592) ................................... $11.95
AR15-Type Hammer w. J pin (8448612-SK) ............... $14.95 Trigger for AR15-Type (8448592-S) ........................... $11.95
M16 Hammer w. J pin* (8448612-K) ....................... $14.95 Trigger w. Spring for AR15-Type (9349115-S) ............. $12.95
Hammer Pin (8448609), Trigger Pin (8448609), Trigger Spring (8448593) .......................................... $1.00
or Sear Pin* (8448599) each .................................... $1.00 Trigger Guard (8448587)........................................... $5.50
Hammer Spring (8448611) ....................................... $1.00 Trigger Guard Roll Pin (MS16562-35) ........................... $ .55
Magazine Catch Assembly (A MC ASS) ......................... $4.95
Magazine Catch (8448638) ....................................... $3.50
Magazine Catch Button (8448636)............................. $1.50
Magazine Catch Spring (8448637) .............................. $ .55
Pistol Grip A2 (9349127) ........................................ $12.95
Pistol Grip Screw (AN501D416-18) .............................. $ .65
Pistol Grip Screw Washer (MS35335-61) ...................... $ .45
Pivot Pin — Front (8448621) ................................... $4.20

a statemeNt from bushmaster regardiNg machiNe guN parts


The position of the Bureau of Alcohol, Tobacco and Firearms (ATF) is that if your AR15-Type rifle contains even one M16 component, it is a
machine gun. If you own an AR15-Type from any manufacturer, check to make sure there are no M16 components in its assemblies. If there
are, remove them immediately. Machine them to AR configuration, or replace them and destroy the M16 components. Refer to the illustrations
below to determine if you have M16 components in your assemblies. If you have any questions about your parts, give us a call and we’ll be
glad to supply you with the legally acceptable parts.
Sales of M16 components by Bushmaster Firearms International, LLC will only be made to the following categories of customers: (1) Class 3 (NFA)
Dealer, (2) Individual who has a registered NFA weapon, (3) Federal Firearms Licensee with a customer who has a registered NFA weapon.

26 Phone orders: 1.800.998.7928


upper receiver/
barrel assemblies
precision-crafted, modular
design. bushmaster upper
receiver/barrel assemblies.
• Infinite configuration possibilities – the versatile Bushmaster
modular AR platform 7.62x39mm caliber
upper assembly
• Barreled upper receivers can be used on existing AR rifle or
carbine lower units • Same features as the 6.8mm SPC (below left)
• All receivers feature integral brass deflectors and hard anodized Bushmaster 7.62x39mm –
finish 16" Bbl A3 Rifle Upper Assembly
• Each assembly is factory headspaced, test-fired and ready to use
(BURA3B 16M439) ........................................... $785.00
Bushmaster 7.62x39mm –
• Bushmaster 4150 chrome moly-vanadium steel barrels
16" Bbl A2 Rifle Upper Assembly
feature hard chrome lining in both bore and chamber for
extended barrel life (BURA2B 16M439) ........................................... $685.00
• Optional stainless steel barrels offer exceptional durability and
weather resistance
• Threaded muzzles

5.56mm/.223 caliber gas


piston upper assembly
.450 caliber upper assembly
• Bushmaster Gas Piston system offers improved reliability and
• Add the hard-hitting punch of the 450 Bushmaster to your control to the already dependable AR-type rifle platform
Bushmaster lower receiver instantly
• Eliminates carbon buildup, gas leaks and heat within the upper
• AR-type gas operating system drastically reduces recoil for receiver
excellent second shot control
• Requires less gas pressure to operate – functions with a wider range
• Aluminum forearm free-floats the barrel for optimum accuracy of ammunition with reduced recoil
• Heavy barrel is hard-chrome lined in bore and chamber for • Includes A3 handle on flat-top upper, or solid handle on A2
exceptional durability and features 1 in 24" twist rifling, version
optimized for the .450 bullet
• B.M.A.S. flip-up front sight and birdcage suppressor
• Includes 5-round .450 specific magazine on both
Bushmaster .450 – 20" Bbl Rifle Upper Assembly Bushmaster 5.56mm/.223 Caliber A3 Gas Piston Upper
(BURVMB 20-45)............................................... $795.00 Assembly
Bushmaster .450 – 16" Bbl Carbine Upper Assembly (BURA3B 16M4-GP) ........................................ $1,130.00
(BURVMB 16-45)............................................... $785.00 Bushmaster 5.56mm/.223 Caliber A2 Gas Piston Upper
Assembly
(BURA2B 16M4-GP) ........................................ $1,030.00

6.8mm spc caliber


upper assembly varminter/predator .223 cal.
upper assembly
• 6.8mm SPC (Special Purpose Cartridge) was specifically devel-
oped for military applications and is now available commercially • Vented free-floating fore-end and scope risers on a flat-top upper
• Velocity averages 2600 FPS with 115-gr. bullets • 11˚ competition muzzle crown and milled gas block
• The 6.8mm SPC was specially adapted to fit the AR15-Type • Fluted, extra heavy, non-chrome-lined 20" barrel with 1 in 8"
magazine twist
• 16" M4-profile barrel is fitted with Izzy muzzle brake Bushmaster Predator Upper Assembly
• 26-round magazine included (PURVMB 20FPRED8) ......................................... $775.00
Bushmaster 6.8mm SPC – 16" Bbl A3 Rifle Upper Assembly • Fluted, extra heavy, non-chrome-lined 24" barrel with 1 in 9"
(BURA3B 16M468) ........................................... $785.00 twist
Bushmaster 6.8mm SPC – 16" Bbl A2 Rifle Upper Assembly Bushmaster Varminter Upper Assembly
(BURA2B 16M468) ........................................... $685.00 (PURVMB 24FVAR9)........................................... $785.00

www.bushmaster.com 27
upper receiver/
barrel assemblies
16" heavy carbine upper assembly
• 16” barrel carbines offer compact size, balanced swing weight, and
stainless varmint special .223 great accuracy called for in many tactical situations
cal. upper assembly • Standard issue for many law enforcement and military units
• Vented free-floating fore-end and scope risers on a flat-top upper • Available in both A3 and A2 versions, with or without bolt,
with milled gas block carrier, and charging handle
• Stainless steel, heavy, non-chrome-lined 24" barrel 16” Heavy A3 Carbine Upper Assembly
with 1 in 9" twist (BURA3B 16) .................................................... $685.00
Stainless Steel Varmint Special Same Heavy A3 Assembly Less Bolt, Carrier and Charging Handle
(PURVMB 24-9SS) ............................................. $785.00 (BURA3 16) ..................................................... $535.00
• Stainless steel, heavy, non-chrome-lined 24" barrel 16” Heavy A2 Carbine Upper Assembly
with 1 in 9" twist (BURA2B 16) .................................................... $585.00
Varmint Special Upper without Bolt, Carrier Assembly and Same Heavy A2 Assembly Less Bolt, Carrier and Charging Handle
Charging Handle (BURA2 16) ...................................................... $435.00
(PURVM 24-9SS) ............................................... $635.00

16” m4 patrolman’s carbine


upper assembly
• Similar to our M4-type carbines, but with additional barrel length
modular carbine (16”) to make them legal for sale to individual officers
upper assembly • Forged, lightweight 7075T6 aircraft-quality aluminum receivers
• Fluted, chrome-lined, chrome moly steel 16” barrel with 1 in incorporate all M16A2 design improvements including cartridge
9” twist case deflector, bolt catch assembly and raised ribs for protection
• Milled gas block, flip-up sights, 4-rail fore-end with rail covers against accidental magazine release
• Bipod/sling stud, flat-top upper receiver with bolt carrier, charg- • Available in both A3 and A2 versions, with or without bolt,
ing handle and forward assist carrier, and charging handle
Complete Upper Receiver 16” A3 Patrolman’s Carbine Upper Assembly
(BURVMB 16FMC) ............................................. $990.00 (BURA3B 16M4) ............................................... $695.00
Without Bayonet Lug or Suppressor Same A3 Assembly Less Bolt, Carrier and Charging Handle
(PURVMB 16FMC) ............................................. $990.00 (BURA3 16M4) ................................................ $545.00
16” A2 Patrolman’s Carbine Upper Assembly
(BURA2B 16M4) ............................................... $595.00
Same A2 Assembly Less Bolt, Carrier and Charging Handle
(BURA2 16M4) ................................................. $445.00
bushmaster 14.5" m4-type
upper assembly w/ izzy
suppressor
M4A3 .223 Caliber Upper Assembly bushmaster 16” dissipator
(BURA3B 14.5M4 IZ) ......................................... $725.00 carbine upper assembly
Same Assembly Less Bolt, Carrier and Charging Handle • Gas block located behind the front sight base and under the
(BURA3 14.5M4 IZ) ........................................... $575.00 full-length handguards to guard against heat buildup
M4A2 .223 Caliber Upper Assembly A3 Dissipator Carbine Upper Assembly
(BURA2B 14.5M4 IZ) ......................................... $625.00 (BURA3B 16D) .................................................. $705.00
Same Assembly Less Bolt, Carrier and Charging Handle Same A3 Assembly Less Bolt, Carrier and Charging Handle
(BURA2 14.5M4 IZ) ........................................... $475.00 (BURA3 16D) .................................................... $555.00
State-compliant uppers also available. A2 Dissipator Carbine Upper Assembly
(BURA2B 16D) .................................................. $605.00
Same A2 Assembly Less Bolt, Carrier and Charging Handle
(BURA2 16D) .................................................... $455.00

28 Phone orders: 1.800.998.7928


bushmaster 16” superlight bushmaster 11.5” barrel
upper assembly upper assembly with 5.5”
Superlight A3 Carbine Upper Assembly Flash suppressor
(BURA3B 16SL) ................................................. $695.00 A3 Carbine Assembly with 5.5” Flash Suppressor
Same Assembly Less Bolt, Carrier and Charging Handle (BURA3B 11.5/5.5) .......................................... $695.00
(BURA3 16SL) ................................................... $545.00 Same A3 Assembly Less Bolt, Carrier and Charging Handle
Superlight A2 Carbine Upper Assembly (BURA3 11.5/5.5) ............................................ $545.00
(BURA2B 16SL) ................................................. $595.00 A2 Carbine Assembly with 5.5” Suppressor
Same Assembly Less Bolt, Carrier and Charging Handle (BURA2B 11.5/5.5) .......................................... $595.00
(BURA2 16SL) ................................................... $445.00 Same A2 Assembly Less Bolt, Carrier and Charging Handle
(BURA2 11.5/5.5) ............................................ $445.00
bushmaster “v match”
16”/20”/24” upper assembly
16” V Match Carbine Upper Assembly upper receiver/barrel assemblies
(BURVMB 16) ................................................... $625.00 For NFa class 3 & pistols
Same Assembly Less Bolt, Carrier and Charging Handle Due to BATF regulations restricting barrel length, the upper
(BURVM 16) ..................................................... $475.00 receiver/barrel assemblies below are legal for installation
20” V Match Rifle Upper Assembly
only on weapons registered as short barreled rifles, full autos
or pistols, and cannot be sold to the general public without
(BURVMB 20AH)................................................ $625.00 proper paperwork and permitting. For any questions regarding
Same Assembly Less Bolt, Carrier and Charging Handle these uppers, please consult our sales professionals.
(BURVM 20AH) ................................................. $475.00
24” V Match Rifle Upper Assembly
(BURVMB 24AH)................................................ $635.00
Same Assembly Less Bolt, Carrier and Charging Handle
(BURVM 24AH) ................................................. $485.00
bushmaster 20”/24” NatioNal bushmaster 11.5” barrel
match target upper assembly upper assembly
20” A3 w/A3 Carry Handle A3 Carbine Upper Assembly
(BURA3B 20) .................................................... $685.00 (BURA3B 11.5) ................................................. $685.00
Same Assembly Less Bolt, Carrier and Charging Handle Same A3 Assembly Less Bolt, Carrier and Charging Handle
(BURA3 20) ...................................................... $535.00 (BURA3 11.5) ................................................... $535.00
20” A2 Solid Carry Handle A2 Carbine Upper Assembly
(BURA2B 20) .................................................... $585.00 (BURA2B 11.5) ................................................. $585.00
Same Assembly Less Bolt, Carrier and Charging Handle Same A2 Assembly Less Bolt, Carrier and Charging Handle
(BURA2 20) ...................................................... $435.00 (BURA2 11.5) ................................................... $435.00
24” A3 w/A3 Carry Handle
(BURA3B 24) .................................................... $695.00
Same Assembly Less Bolt, Carrier and Charging Handle bushmaster 14.5” m4 barrel
(BURA3 24) ...................................................... $545.00 upper assembly
24” A2 Solid Carry Handle M4A3 Carbine Upper Assembly
(BURA2B 24) .................................................... $595.00 (BURA3B 14.5M4) ............................................ $695.00
Same Assembly Less Bolt, Carrier and Charging Handle Same M4A3 Assembly Less Bolt, Carrier and
(BURA2 24) ...................................................... $445.00 Charging Handle
20” A3 Stainless w/A3 Handle (BURA3 14.5M4) .............................................. $545.00
(BURA3B 20SS) ................................................ $735.00 M4A2 Carbine Upper Assembly
Same Assembly Less Bolt, Carrier adn Charging Handle (BURA2B 14.5M4) ............................................ $595.00
(BURA3 20SS .................................................... $585.00 Same M4A2 Assembly Less Bolt, Carrier and
20” A2 Stainless Solid Carry Handle Charging Handle
(BURA2B 20SS .................................................. $635.00 (BURA2 14.5M4) .............................................. $445.00
Same Assembly Less Bolt, Carrier and Charging Handle 14.5” heavy barrel uppers also available.
(BURA2 20SS .................................................... $535.00
State-compliant uppers also available.
www.bushmaster.com 29
Upper receiver parts
BUshmaster complete Bolt & Bolt cam pin
Bolt carrier assemBly •..Machined.of.hardened.steel.to..
AR15-Type military.specs..or.better
(8448501-S)..................................................... $137.95 •..Manganese.phosphated.for..
M16 protection.against.rust.or.corrosion
.(8448501)....................................................... $137.95 Bolt.Cam.Pin
*NOTE:.M16.parts.are.NOT.legal.for.sale.in.California. (8448502)............................................................ $4.50

chrome steel Firing pin


ar15-type or m16 Bolt carrier
assemBly with Key staKed on •.A.standard,.mil..spec..firing.pin.for.the.AR15-Type.or.M16
•.Chrome-lined.for.smooth.bolt.functioning.and.long.life AR15-Type
AR15-Type (8448503-S)......................................................... $7.50
(8448505-S)....................................................... $92.50 M16
M16* .(8448503)........................................................... $7.50
(8448505).......................................................... $92.50
NOTE:..M16.bolt.carriers.must.be.used.in.Title.II.receivers.for.legality...
An.FFL.or.Tax.Stamp.is.required.for.purchase..
*M16.parts.are.NOT.legal.for.sale.in.California. titaniUm Um Firing pin
•..Titanium.is.40%.lighter.than.steel.for.faster.lock.time.and.
greater.accuracy
•..Patented,.precision.machined.pin.improves.safety.by.reducing.
the.possibility.of.a.“slam.fire”
AR15-Type
complete ar15-type (13-7015)........................................................... $42.50
Bolt assemBly
•..Includes.bolt,.extractor.assembly,.pins,.gas.rings,.ejector.
assembly
Complete.AR15-Type.Bolt.Assembly
(8448509).......................................................... $56.00

ar15-type or m16 Bolt carrier withoUt Key


•..Same.quality.chrome-lined.carrier,.but.without.the.carrier.key
AR15-Type
(8448507-S)....................................................... $78.95
M16*
(8448507).......................................................... $78.95
CAUTION:..Bolt.carrier.keys.must.be.“staked”.onto.the.carrier.for.safe.and.proper.functioning.in.your.rifle..For.information.on.this.procedure,.or.
any.AR15-Type.assembly/disassembly.work,.we.recommend.the.Bushmaster.video.or.the.U.S..government.M16.technical.manual.
(see.Gunsmithing.Section).
*M16.parts.are.NOT.legal.for.sale.in.California.

30 Phone orders: 1.800.998.7928


ar15-tyPe/m16 e/m16 Charging handle
taCtiCal latCh
Bolt Carrier reBuild Kit •  Sturdy steel construction – improves on the standard charging 
•  Includes all parts shown to rebuild your bolt and carrier handle latch and allows easy weapon charging, or left- handed 
operation when using a scope or other optics
AR15-Type
(A BC REBUILD) ................................................... $37.95 AR15-Type/M16 (Latch Only)
(1005-249-02) ................................................... $21.95
M16*
M BC REBUILD) .................................................... $37.95
*NOTE: M16 parts are NOT legal for sale in California.    enidine hydrauliC
WARNING: Key must be staked onto carrier. BuFFer –
rate reduCer
•  Drop-in replacement for  
standard buffers, with units designed for either rifles or carbines
designed for either rifles carbines
•  Quality alloy steels with a black oxide finish; action rod is nickel 
tion Port Cover assemBly
ejeCtion plated for smooth operation
•  Manganese phosphate finished in matte gray/black color to  •  Rear “bumper” is molded black polyurethane
match hard anodized uppers For Carbines
Ejection Port Cover Assembly (HB-1A) .............................................................. $89.95
(A EJ COV ASS) .................................................... $12.95 For Rifles
(HB-2A) .............................................................. $99.95

Forward assist
individual Parts
assemBlies —
For uPPer reCeivers
teardroP or
round style Bolt Cam Pin
• Machined from 4140   (8448502) ........................................................... $4.50
ordinance steel  Bolt Carrier Key with screws/must be staked
• Manganese phosphate finished  (AR BC KEY/SCREW) ............................................ $15.95
Teardrop Style Bolt Gas Rings (set of 3)
(9349086-TD KIT) ............................................... $21.50 (8448511K) ......................................................... $3.15
Round Style Ejector Assembly
(9349086 KIT) ................................................... $21.50 (A EJECT ASS) ........................................................ $3.50
Extractor Assembly
(A EXTRAC ASS) ................................................... $14.95
Extractor
(8448512) ......................................................... $13.95
Charging handle assemBly Extractor Pin
•  Precision machined from 7075T6 aircraft-quality aluminum forg- (8448513) ........................................................... $1.00
ings, they are hard anodize finished per U.S. mil. spec. — with  Extractor Spring
spring-loaded latch installed (8448755SP) ....................................................... $1.50
Charging Handle Assembly Extractor Spring Insert
(8448517) ......................................................... $26.50 (8448754) ............................................................ $ .80
AR15-Type/M16 (Charging Handle with Tactical Latch) Firing Pin
(8448517-TL) ..................................................... $42.95 (8448503-S) ........................................................ $7.50
Firing Pin Retaining Pin
(8448504) ........................................................... $1.00

www.bushmaster.com 31
Barrels
Bushmaster Barrels are the finest AR15-Type/M16-Type barrels made – machined from 4150
chrome moly-vanadium steel. We also offer 20"/24" heavy profile barrels machined from stainless steel. Most
Bushmaster barrels are hard chrome-lined (except the Stainless Steel, Varminter, Predator, DCM and 9mm) to offer
corrosion resistance in the bore and chamber. The chrome lining is much harder than barrel steel and effectively
doubles barrel life with proper care (exactly why the military specifies the process). Chrome’s lubricity (i.e.,
“slipperiness”) reduces friction, increases velocity, aids in chambering and extraction, and speeds barrel cleaning.
Bushmaster barrels are manganese phosphate finished (except the Stainless) to guard against exterior rust or
corrosion, and to provide the same matte black, non-reflective finish found on quality military-type arms.

Rifling. Bushmaster barrels have 6 grooves and lands, right hand Barrel Fluting Option. Fluting is the process of milling 6 grooves
twist, 1 turn in 9” (except for DCM & Predator barrels – 1 in 8”). into the barrel’s surface to increase cooling capability by increasing
The 1 in 9” twist offers optimal results for the widest variety of the barrel’s surface area. Depending upon barrel length, fluting
commercially available .223/5.56mm ammunition. increases surface area by as much as 180% and can reduce barrel
weight by as much as 20%. Because of the extensive machining
Forged Front Sights. Our standard front sights are machined from
involved, order fulfillment on fluted barrels can take longer. Ask
steel forgings to offer superior tensile strength. We do not use cast-
your sales representative about availability when ordering fluted
ings, which may crack or break if you accidentally drop your rifle.
barrels. To order a barrel with fluting, simply add $50.00 to the
Headspacing. Barrel assemblies are headspaced at the factory and price of the barrel (or assembly), and add an “F” to the end of the
are shipped ready for assembly and use. Barrel assemblies can part number. Note: Fluting is not available on some barrels, such
be ordered with either a stepped, crowned muzzle or a threaded as the A2 Gov’t. Profile, the M4-Type barrel and some Stainless
muzzle for attachment of a flash suppressor or muzzle brake. BATF Steel barrels. Fluting is included on Varminter and Predator barrels
rulings permit permanent factory installation of muzzle brakes/ (Predator shown below).
suppressors on barrels if the overall length (barrel & brake, etc.)
equals at least 16”. Ask your Bushmaster representative about
factory-installed muzzle brake/compensator/flash suppressor
options available, or see muzzle brakes/suppressors in this catalog.
Pre-ban/Post-ban. A caution for our customers: when the Assault
Purchase Two Ways. In the listings below, Bushmaster barrels can Weapons Ban of 1994 expired on Sept. 13th, 2004, it became
be purchased as “Complete Assemblies,” which include all parts legal to again offer features on the AR15-Type rifle such as flash
forward of the upper receiver: handguards; gas tube; delta ring kit; suppressors and bayonet lugs that had been deemed illegal for
etc. as shown here: those previous 10 years. Though that federal legislation has
expired, certain states have retained their own versions of assault
weapons ban statutes. Buyers should check their own state and
county laws to determine the local legality of rifles or parts such as
barrels with these features and accessories.

Bushmaster barrels can also be purchased as “Barrel Only,” which


includes the barrel, barrel nut, handguard cap and complete front
sight assembly (with sight post and sling swivel) as a savings
to those shooters who already have handguards. An example of
”Barrel Only” configuration is shown here:

Note: “Barrel Only” assemblies of 16” or longer length will not


include flash suppressors; order those separately from our Muzzle
Brakes/Suppressors/Compensators Section.

32 Phone orders: 1.800.998.7928


Barrel asseMBlies
223 reM/5.56MM CaliBer
stainless steel replaCeMent 14.5" M4 Barrel only with
Barrels for CarBon 15 rifles izzy CoMpensator
& pistols With Bayonet Lug
• Match Grade 416 Stainless Steel factory replacement barrels (A BBL-14M4 IZFH) ............................................ $240.00
—.223/5.56mm cal. — precision machined, polished and 1 Without Bayonet Lug
X 9” twist rifled, these barrels require factory installation (special (P BBL-14M4IZ) ................................................. $240.00
torqueing with a unique barrel wrench — no charge)
Carbon 15 R21 & Bushmaster Lady Rifle Barrel
(AZ15367) ....................................................... $159.95
Carbon 15 R97 Rifle Barrel
(AZ15368) ....................................................... $209.95
R97S & R97F Barrel 14.5” M4-type Barrel asseMBly
(AZ15368T) ...................................................... $209.95 • Chrome-lined, 1 x 9” twist barrel with birdcage
P21 Pistol Barrel suppressor – machined for the addition of the M203 grenade
(AZ15313) ....................................................... $139.95 launcher with the narrow “government” profile under the
P21S Pistol Barrel handguards for light weight like the original A1 rifle barrel
(AZ15313T) ...................................................... $139.95 14.5” M4-Type Barrel Assembly
P97 Pistol Barrel (A BBL-14M4A) ................................................. $235.00
(AZ15314) ....................................................... $179.95
P97S Pistol Barrel 14.5” M4-type Barrel only
(AZ15314T) ...................................................... $179.95 • Less handguards, gas tube, delta ring kit and
birdcage flash suppressor
14.5” M4 Barrel Only
(A BBL-14M4) ................................................... $205.00
BushMaster “short
Barrelled” asseMBlies
• These chrome-lined barrel assemblies (either 11.5” or 14.5”) 16” M4 “patrolMan’s
with A2 birdcage suppressors may only be used on registered CarBine” Barrel asseMBly
short barrelled rifles or full auto models for legality. Can be • 16” M4 profile chrome-lined barrel with A2 birdcage suppressor on
installed on pistols as well. threaded muzzle – one of our most popular configurations
11.5” Barrel Assembly With Bayonet Lug
(A BBL-11.5A) ................................................... $225.00 (A BBL-16M4A) ................................................. $235.00
11.5” Barrel Only Without Bayonet Lug or Threaded Muzzle
(A BBL-11.5) ..................................................... $195.00 (P BBL-16M4A).................................................. $235.00
14.5” Heavy Barrel Assembly
(A BBL-14.5A) ................................................... $225.00 16” M4 “patrolMan’s
14.5” Heavy Barrel Only CarBine” Barrel only
(A BBL-14.5) ..................................................... $195.00 • Less handguards, gas tube, delta ring kit and suppressor
NOTE: With a permanently installed Izzy compensator, or other 2 With Bayonet Lug
3/16” suppressor, the 14.5” heavy barrel assembly becomes (A BBL-16M4) ................................................... $205.00
a legal 16” barrel. Ask your Bushmaster salesperson for details. Without Bayonet Lug or Threaded Muzzle
(P BBL-16M4) ................................................... $205.00

16” heavy CarBine Barrel asseMBly


14.5" M4 Barrel asseMBly with
izzy CoMpensator • Heavy profile 16” chrome-lined barrel with A2
birdcage suppressor on threaded muzzle — many
• M4 profile chrome-lined barrel with pinned and welded Izzy
other suppressors & brake will screw on
compensator — is BATF legal for semi-auto rifles. Total length
is just over 16". With Bayonet Lug
With Bayonet Lug (A BBL-16A) ...................................................... $225.00
(A BBL-14M4 IZFHA) .......................................... $270.00 Without Bayonet Lug or Threaded Muzzle
Without Bayonet Lug (P BBL-16A........................................................ $225.00
(P BBL-14M4IZA) ............................................... $270.00
www.bushmaster.com 33
Barrel assemBlies
223 rem/5.56mm CaliBer
16” Heavy CarBine Barrel only 16” Dissipator m4 Barrel only
• Less handguards, gas tube, delta ring kit and suppressor • Less handguards, gas tube, delta ring kit and suppressor
With Bayonet Lug With Bayonet Lug
(A BBL-16) ........................................................ $195.00 (A BBL-16DM4) ................................................. $225.00
Without Bayonet Lug or Threaded Muzzle Without Bayonet Lug or Threaded Muzzle
(P BBL-16) ........................................................ $195.00 (P BBL-16DM4) ................................................. $225.00
16” superligHt Barrel assemBly
• The lightest 16” chrome-lined barrel we offer — with A2
birdcage suppressor on threaded muzzle. Tapers from .670”
to .565” under handguards, .625” under sight base, and to
.570” at the muzzle (similar to the original Vietnam era A1 20” m16 a2-type
barrel profile). Barrel assemBly
With Bayonet Lug • A gov’t. profile chrome-lined barrel — light in weight and
(A BBL-16SLA) ................................................... $235.00 reduced in diameter under the handguards —ideal for restoring that
older rifle or building a new lightweight
Without Bayonet Lug or Threaded Muzzle
(P BBL-16SLA) ................................................... $235.00 With Bayonet Lug & A2 Birdcage Suppressor
(A BBL-20A2A) .................................................. $235.00
Note: Due to diameter at muzzle, no “slip-on/pinned” type muzzle brakes
will fit this barrel. Use only 1/2”x 28 t.p.I. threaded accessories. With Plain Muzzle & no Bayonet Lug
(P BBL-20A2A) .................................................. $235.00
16” superligHt Barrel only
• Less handguards, gas tube, delta ring kit and suppressor 20” m16 a2-type Barrel only
With Bayonet Lug With Bayonet Lug
(A BBL-16SL)..................................................... $205.00 (A BBL-20A2) .................................................... $205.00
Without Bayonet Lug or Threaded Muzzle Without Bayonet Lug or Threaded Muzzle
(P BBL-16SL)..................................................... $205.00 (P BBL-20A2) .................................................... $205.00
16" Dissipator Heavy
Barrel assemBly 20” target Heavy
• A 16" chrome-lined barrel with carbine position gas block, and full Barrel assemBly
length, heat-shielded handguards for excellent cooling and the full • A 20” heavy profile barrel chrome-lined in both bore and chamber
sight radius designed into the A2 sight system — with A2 birdcage flash suppressor and all parts forward of the
With Bayonet Lug upper receiver
(A BBL-16DA) .................................................... $245.00 With Bayonet Lug
Without Bayonet Lug or Threaded Muzzle (A BBL-20A) ...................................................... $225.00
(P BBL-16DA) .................................................... $245.00 With Plain Muzzle & no Bayonet Lug
(P BBL-20A) ...................................................... $225.00
16" Dissipator Heavy Barrel only
• Less handguards, gas tube, delta ring kit and suppressor 20” target Heavy Barrel only
With Bayonet Lug • Less handguards, gas tube, delta ring kit and suppressor
(A BBL-16D) ...................................................... $215.00 With Bayonet Lug
Without Bayonet Lug or Threaded Muzzle (A BBL-20) ........................................................ $195.00
(P BBL-16D) ...................................................... $215.00 Without Bayonet Lug or Threaded Muzzle
(P BBL-20) ........................................................ $195.00
20” stainless steel
16” Dissipator m4 Heavy Barrel assemBly
Barrel assemBly • Per request of many high power competition shooters, the
• As described above but with M4 profile for lighter weight. accurate 1 in 9” twist Bushmaster barrel is available in brush
Carbine position gas block, heat shielded rifle handguards, full finished, non-chrome-lined, 416 Stainless Steel
sight radius designed of the A2 sight system With Bayonet Lug and Birdcage
With Bayonet Lug (A BBL-20SSA) .................................................. $275.00
(A BBL-16DM4A) ............................................... $255.00 Plain Muzzle & no Bayonet Lug
Without Bayonet Lug or Threaded Muzzle (P BBL-20SSA) .................................................. $275.00
(P BBL-16DM4A)................................................ $255.00
34 Phone orders: 1.800.998.7928
20” StainleSS Steel Heavy
Barrel Only
• Less handguards, gas tube, delta ring kit and suppressor
With Bayonet Lug
(A BBL-20SS) .................................................... $245.00 24” varminter
Barrel aSSemBly
Without Bayonet Lug or Threaded Muzzle
(P BBL-20SS) .................................................... $245.00 • 24” fluted, non-chrome-lined barrel based on DCM competition
design — button rifled 1 x 9”. Features a hybrid SAAMI
20” PredatOr Barrel aSSemBly spec. chamber with longer throat or “leade” to accommodate
5.56mm ammunition.
• Similar to Varminter but 20” Fluted length and rifled 1 x 8” for
the heavier bullets used on Predators – non-chrome-lined, with • It is 1” in diam. out to the gas block with an 11° competition
an 11° competition muzzle crown muzzle crown; V Match sight base/gas block and Varminter
vented fore-end with bipod/sling stud, and includes a bolt
• V Match sight base/gas block and vented fore-end with sling
stud — assembly by gunsmith recommended • We recommend assembly onto your upper receiver
by an experienced AR15-Type gunsmith to achieve full
20” Predator Barrel Assembly accuracy — shipped unassembled (as shown)
(P BBL-20FPRED8A) ........................................... $381.95
24” Varminter Barrel Assembly
(P BBL-24FVAR9A) ............................................. $391.95
20” PredatOr Barrel Only
• Same as above: barrel, bolt and V Match milled gas block
24” varminter Barrel Only
— less vented free-float fore-end and gas tube. Shipped
unassembled; gunsmithing recommended. • Same as above: barrel, bolt and V Match milled gas block
20” Predator Barrel Only — less Varminter vented fore-end and gas tube. Shipped
unassembled; gunsmithing recommended.
(P BBL-20FPRED8) ............................................. $303.95
24” Varminter Barrel Only
24” target Heavy (P BBL-24FVAR9) ............................................... $313.95
Barrel aSSemBly
• 24” heavy profile chrome-lined barrel
With Bayonet Lug
(A BBL-24A) ...................................................... $235.00
With Plain Muzzle & no Bayonet Lug 24” StainleSS varminter
(P BBL-24A........................................................ $235.00 Barrel aSSemBly
• A highly accurate 24” barrel as used in our stainless Varminter
24” target Heavy Barrel Only special rifle — brush-finished 416 stainless steel in 1 in 9” twist
• Less handguards, gas tube, delta ring kit and suppressor complete with vented aluminum free-floater fore-end, sling stud,
With Bayonet Lug gas block, gas tube, bolt and barrel extension
(A BBL-24) ........................................................ $205.00 • Shipped unassembled; requires gunsmithing
Without Bayonet Lug or Threaded Muzzle 24” Stainless Varminter Barrel Assembly
(P BBL-24) ........................................................ $205.00 (P BBL-24A-SS) .................................................. $391.95

24” StainleSS varminter


Barrel Only
• Includes 24” 1 X 9” twist stainless steel barrel with gas block,
bolt and barrel extension
24” Stainless Varminter Barrel Only
(P BBL-24SS) .................................................... $313.95

www.bushmaster.com 35
barrel parts/compensators/
suppressors/muzzle brakes
A B. Round Cap (Standard Barrel)
(SGW-09) ............................................................. $6.50
B B. Round Cap (Heavy Barrel)
(SGW-10F)............................................................ $6.50
C C. M4 Cap (Notched for M203)
“car 15” Flash suppressors (SGW-10F-M) ........................................................ $6.50
• High quality, manufactured in the U.S.A. — the six-slot design NOTE: Diameter of standard barrel = .625”
makes these suppressors very effective on the short barrelled Diameter of heavy barrel = .750”
carbine
• For threaded muzzles only (threaded 1/2" x 28 t.p.I.)
A. Shorty Look Slip-over Flash Suppressor A
(Std Barrels .610@Muzzle) B D
C
(MMT-0019) ....................................................... $15.95
A. Shorty Look Slip-over Flash Suppressor
(Hvy Barrels .720@Muzzle) IndIvIdual delta rInG parts
(9349SFSH) ....................................................... $20.95 A. Aluminum Delta Ring
Internal threads allow a “slip-over” installation onto the barrel, giving your (8448712)........................................................... $7.50
gun a “shorty” look without sacrificing accuracy – 5” overall length B. Handguard Weld Spring
B. CAR 15 Extended Flash Suppressor (8448555)........................................................... $5.25
(MMT-500) ......................................................... $15.95 C. Handguard Snap Ring
5.5” overall length — threaded for all pre-ban barrels (MS16626-1137) ................................................. $2.75
C. CAR 15 “Original” Flash Suppressor D. Gas Tube Roll Pin
(1005-914-3902) ............................................... $15.95 (MS16562-106) ..................................................... $.50
This is the original 4.5" M177 carbine design Delta Ring Kit (includes all parts below)
(8448712K) ....................................................... $13.95

A C D
Gas tubes
• Quality materials and machining, properly bent for a perfect fit
and flawless functioning in your rifle
B
Rifle-length Gas Tube
(8448567)......................................................... $14.95 IndIvIdual barrel parts
Carbine-length Gas Tube A. Front Sling Swivel
(1005-914-3504) ............................................... $12.95 (8448571)........................................................... $3.50
Gas Tube Roll Pin B. Front Sling Swivel Rivet
(MS16562-106) ..................................................... $.50 (8448697)............................................................. $.80
C. Barrel Extension
A B C (9349054BE) ..................................................... $15.95
D. Barrel Nut
(9349054BN)..................................................... $12.95

handGuard caps
• Manganese phosphate finished steel handguard caps in three
different types for standard or heavy profile barrels
• NOTE: Rifle-length handguards take the triangular cap; Standard
carbine handguards take the round cap; M4 (oval profile)
carbine handguards take either round cap (B or C)

A. Triangular Cap (Standard Barrel)


(SGW-10) ............................................................. $6.50
A. Triangular Cap (Heavy Barrel)
(9349053)........................................................... $6.50

36 Phone orders: 1.800.998.7928


A B A B
Bushmaster Izzy Flash Bushmaster Izzy muzzle Brake
suppressor/Compensator (5.56mm/.223 Cal.)
• One of a series designed by a Bushmaster employee Production approved by the BATF – featuring four gas ports and a
• Features 3 gas ports, a machine turned ribbed design, and a ribbed design to improve cooling. Machined of 4140 gun steel with
closed bottom a manganese phosphate finish – very effective in controlling muzzle
rise. Slip-on/taper pinned version for barrels with plain crowned
• Functions as a flash suppressor, but also effectively controls muzzles, and threaded model (shown left - threaded 1/2” x 28
muzzle rise in rapid fire t.p.I.) can be installed without regard to port location (timing) and
• Machined from quality gun steel – manganese will still be effective; however, most are installed with ports positioned
phosphate finished 12–3–6–-9 o’clock. The slip-on, pinned version requires factory
A. Bushmaster Izzy Flash Suppressor/Compensator installation or professional gunsmithing to drill and install the taper
(IZ-102660-FH) ................................................... $36.95 pin, and for extra safety, high strength Loctite® should be used in
addition to the taper pin.
• For plain muzzle 5.56mm/.223 cal. post-ban guns. Similar to
above but slips over .700” diam. muzzles and is pinned on with a A. Threaded Izzy Brake (for 1/2” x 28 t.p.I. threaded barrels
taper pin and high strength Loctite® for extra safety. — requires lock washer)
B. Bushmaster Izzy Flash Suppressor/Compensator (IZ-102660-PRBF)................................................ $36.95
(IZ-102660-SFH) ................................................ $36.95 B. Slip-on Izzy Brake (for plain muzzles .700” diameter —
requires gunsmithing)
Warning: Requires factory installation or professional gunsmithing
to drill and install the taper pin (IZ-102660-PSTF) ............................................... $36.95
.308 Izzy Brake (for .308 Cal. threaded barrels (5/8” x 24)
NOTE: Bushmaster does NOT sell front sight bases separately due — requires crush washer) (not shown)
to the difficulties of drilling and retro-fitting them to barrels.
(IZ-308-PRBFH) ................................................... $36.95

a2 “Crush” Washer phantom Flash suppressor


(12991533B) ............................ $2.95 Precision CNC machined from quality
• Used at Bushmaster factory for positioning suppressor and muzzle gun steel – phosphate coated to
brake installations – for one time use only military standards – with 5 equally
spaced gas slots, it eliminates most of the
a2 peel Washer flash and offers excellent performance with night
(9349052) ................................ $3.15 vision equipment. Superior strength to earlier forked type, and
• A re-usable multi-layer washer for the correct timing of suppres- it won’t hang up on brush or clothing; 2 3/16” overall for threaded
sor or brake installations on threaded muzzle barrels muzzles only (1/2” x 28 t.p.I.). Requires no specific timing, so only a
lock washer is needed.
Phantom
a1 Flash hIder (YHM-29) ........................................................... $36.95
loCk Washer
phantom 2 Flash suppressor
(8448577) ............................................................ $.60
• An improved version of the
450 Crushwasher Phantom – no bottom slot avoids
(12991533B-45) ................................................. $2.95 a dust signature when firing prone
• Superior flash hiding in all conditions
6.8/7.62/308 Crushwasher
• For standard muzzles (1/2” x 28 t.p.I.),
(TD308002-3) ..................................................... $6.50
machined from quality gun steel with a final phosphate coating
to mil. specs
Phantom
(YHM-28-5C1) ..................................................... $36.95
Note: Crush washer or peel washer is required for correct timing.

www.bushmaster.com 37
BArrel pArTs/CoMpensATors/
suppressors/Muzzle BrAKes
A2 BirdCAge FlAsh suppressor uppressor AAC BrAKes & suppressors
•  Five-slot design (threaded 1/2” x 28  
t.p.I.) without a bottom slot to avoid 
dust signature when shooting prone 
position 
•  Peel washer or crush washer is required 
for correct installation timing
A2 Birdcage Flash Suppressor A B
(9349051) ........................................................... $6.50
Note:  Even if pinned on/welded over, this suppressor is NOT  Muzzle Brake
long enough to make a 14.5” barrel legal for use on a  • Reduce recoil & stay on target. Highly-efficient muzzle brake 
semi-auto rifle. design and compatible with AAC sound suppressors. Constructed 
A1 BirdCAge FlAsh suppressor uppressor with aerospace-grade heat-treated 17-4 stainless steel and 
•  Original birdcage from the Vietnam   SCARmor™ coated for high surface hardness and durability.
era — has six equally spaced slots all  
all A. (10047)  ...................................................... $150.00
around — needs no specific slot timing.  
timing.
Standard 1/2" x 28 t.p.I. threading. B. (10048)  ...................................................... $150.00
• For installation use the flash hider lock washer (p. 37)
washer (p. 37)
A1 Birdcage Flash Suppressor
(8448576) ........................................................... $6.50
gov’T. issue-Type BlAnK Firing
AdApTers
•  Allows the AR15-Type gas system to function with blank ammo
•  Made of heavy steel with a finish of bright paint for safety — fits  C D
over A2 birdcage flash suppressor on 16” & 20” barrels
•  Warning! Remove these adapters BEFORE firing live ammo! Flash Suppressors
Red Firing Adapters (16” & 20” barrels) ....... (RAY-008) $15.95 • The BLACKOUT™ flash suppressor is the most efficient design 
Yellow Firing Adapters (11.5” & 14.5” barrels) ....(RAY-010) $15.95 available. The proprietary features eliminate muzzle flash, even 
on CQB-length barrels. The BLACKOUT™ is inherently stronger 
and more impact resistant than four prong designs, while not 
being subject to the rapid erosion of closed-ended units. A 
high-strength, corrosion-resistant aerospace alloy and ultra-hard 
SCARmor™ finish provide the highest level of durability. Military 
russiAn design AK74-Type tested and selected. 
Muzzle BrAKe
C. (10043)  ........................................................ $99.00
•  A 5.56/.223 caliber copy of the very effective Russian military 
brake found standard on the AK74 rifle D. (10025)  ........................................................ $99.00
•  Screws onto threaded muzzle barrels and locks in place with an  •  Eliminate flash, even on the shortest 
Allen head set screw (Note: a peel washer or crush washer is  barrels, as tested by the U.S. military. 
required for correct timing during installation); 3" overall length Patent-pending three-prong design 
•  Muzzle climb is controlled by three upper gas ports — recoil is  for exteme efficiency and with more  E
diminished by four 45° ports directing gas at an angle from the  strength than a four-prong. Sym-
weapon, and a contoured flat at the end of the brake directs  metrical design for the most accuracy. Two machined flats allow 
gas sideways simple installation with a standard size wrench. Constructed with 
aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ 
•  Post-ban model slips over non-threaded muzzles (.700” diam.) 
coated for high surface hardness and durability. Fits 5.56 NATO 
and pins in place (taper pin included)
(.223) caliber, 1/2 x 28 t.p.l. threaded barrels only. 
For Threaded Muzzles
(MMT-0012A)  .................................................... $27.95 E. (10026)  ........................................................ $59.00
Fits standard threaded barrels — 1/2" x 28 t.p.I.
Post-ban Model for Non-Threaded Muzzles
(MMT-0012PB) ................................................... $27.95
Requires taper pin drilling/pinning. Bushmaster factory installation 
is recommended.
38 Phone orders: 1.800.998.7928
magazines/
magazine accessories
Bushmaster magazines
• Offer durability, value, and guaranteed fit and function in .225/5.56mm AR15-Type rifles
• Boxes stamped with progressive die for tightest tolerances
• Seam welding process optimized for weld ingot, strength and military-standard compliance
30 Round
5 & 10 Round .308 mag
20 Round 20 Round
(8448670-308-20) ............................................. $44.95
5 Round
(8448670-308-5) ............................................... $44.95

Bushmaster 10
round straight-Body
magazine
Bushmaster stainless steel • 10 round capacity steel mag
.223 magazines
• Black finish and follower
30 Round Magazine
• NRA/CMP Service Rifle match approved
(8448670SS) ..................................................... $20.95
10 Round Straight-Body Magazine
As shipped with most Bushmaster rifles. (30-452) ............................................................ $20.95
20 Round Magazine
(8448670-20SS) ................................................ $20.95 30 round
Shorter, slightly curved body. magazines
for Bushmaster
10 Round Magazine
9mm Pistol
(8448670-10SS) ................................................ $20.95 & carBine
5 Round Magazine
• Either molded black polymer
(8448670-5SS) .................................................. $20.95 composite or metal
Blocked for hunting use. • Can be disassembled for cleaning
• Metal magazine has indicator
Bushmaster 6.8mm holes and quantity markings
sPc magazine Black Polymer
• Specific to 6.8mm SPC Rifle (AZ9-00001)....................................................... $28.95
• 5 round and 10 round models have same shell Black Steel
as 26 round but blocked to indicated capacities (AZ9-00003)....................................................... $59.95
• Includes anti-tilt followers
6.8mm
40 round magazine
26 Round for the ar15-tyPe/m16 16
(8448670-68) .................................................... $35.95
• Matte gray finished box
10 Round
• Mil. spec. green follower
(8448670-68-10) ............................................... $35.95
• Check local regulations
5 Round
(8448670-68-5) ................................................. $35.95 40 Round Magazine for the AR15-Type/M16
(MG-0007) ......................................................... $24.95
762X39 (Built to same quality Bushmaster
as 6.8 mag) 450 magazine
26 Round • Heavy-duty stainless steel AR-Type
(8448670-76239-26) ......................................... $35.95 magazine box
10 Round • Single stack follower
(8448670-76239-10) ......................................... $35.95 9 Round
5 Round (8448670-45-9) ................................................ $44.95
(8448670-76239-5) ........................................... $35.95 5 Round
(8448670-45-5) ................................................. $35.95
www.bushmaster.com 39
magazines/
magazine accessories
ba50 rifle &
carbine magazine the l.u.l.a.
• Heavy steel box magazine mag loader
• Laser engraved (8448670-LULA) ................. $25.50
Bushmaster logo • L.U.L.A. is a “loader/unloader acces-
• Manganese phosphate finish sory” that will load a 30 round mag in
with black follower and about 35 seconds and unload it in 5
removable floorplate • Fits all capacity 5.56mm/.223 AR15-Type/M16-Type maga- maga
BA50 Rifle & Carbine Magazine zines, including thermolds and orlites
(BMG-17972A).................................................... $99.95 “L.U.L.A.” Mag Loader for 9mm
(24218)............................................................. $31.95
standard magazine
rebuild Kits
• Mil. spec. parts to refresh magazine
ar15-type/m16 magazine
30 Rd. Mag. Rebuild Kit connector
(8448670-30K) .................................................... $6.50 (51-08-01) ........................................................ $25.50
20 Rd. Mag. Rebuild Kit
Hold twice the ammo with this side-by-side
(8448670-20K) .................................................... $6.50 magazine clamp — fits both 20 and
30 round mags. When you empty one
magazine magazine, drop it out, move over to the
followers full one, and quickly reinsert. Made of
• Plastic replacements for 5.56mm/.223 heavy steel with flat black finish. Screw
Remington magazines slot is sized for use with a coin — works
30 Round with AR180 magazines as well.
(8448672)........................................................... $1.95
Magazines not included

the original magpul (set of 3)


bushmaster magazine springs
• Accessory for the AR15-Type/M16 for quick magazine change
• Quality tempered steel springs for long memory
and positive feed • Molded black rubber Magpul with rough exterior
texture and finger loop
20 Round Magazine Spring
(8448671-20) ...................................................... $3.95 Magpul (Set of 3)
(MP-3) .....$10.95
30 Round Magazine Spring
(8448672)........................................................... $3.95 Magazine not
included
enhanced magazine rebuild Kit
for 5.56/.223 30 rd. magazines
• Enhanced drop-in, anti-tilt follower
• Chrome silicon spring (USGI design)
Enhanced Magazine Rebuild Kit
(MAG205-Gray) .................................................. $11.95
Follower Only
(MAG111-Gray) ..................................................... $1.95

NOTE: With the 2004 “sunset” of the Federal Gun Legislation


of 1994, many features of AR15-Type rifles are again
available — BUT not in all states! Some states have their
own statutes regarding the legality of assault weapons and
the high-capacity magazines used in them. To avoid legal
problems, check your local statutes (both state and county)
before ordering high capacity magazines (greater than 10
round capacity). If in doubt, consult the Bushmaster sales
dept. (1-800-998-7928).

40 Phone orders: 1.800.998.7928


Fits V Match /
Varminter /
Predator

Bag style Brass catcher


(2693828)......................................................... $42.50
• Black Cordura nylon bag with an internal frame and a zippered
opening on the underside for easy emptying of shell cases
• 2" wide Velcro strap wraps around the handguard to hold
Buttstock the bag and frame in place so that it fits flat-top and other
Mag Pouches for the ar15-tyPe AR15-Type rifles
• Strap an extra magazine on with these heavy duty pouches
• Models available for ambidextrous installation on either the A2
trapdoor buttstock or the CAR telescoping stock
• Black nylon webbing construction with heavy-duty Velcro flap
A2 Solid Buttstock Magazine Pouch
(TTMP) ............................................................... $31.95
Telestock Magazine Pouch Magazines not included
(TTTS) ................................................................ $31.95
three Magazine Pouch
• Sewn of Cordura nylon, with a silent clasp, suspension ring and
two belt clips
coMPetition shell Black
Deflectors (6451) .................................................... $16.95
• Snap onto AR15-type models to Olive Drab
keep hot brass under control and (6452)..................................................... $16.95
away from other competitors on
A the firing line
• Allowed under NRA High Power
Competition rules
A. A2 Fixed Carry Handle
(BD-A2) ..................... $22.95 A2-Type —others
B. A3 Flat-tops similar
(BD-A3-Flattop) ............ $22.95
rigiD Brass catchers for ar15-
B C. A3 Removable Handle tyPe rifles
(BD-A3-Handle) ............ $22.95
• Hard plastic brass catchers hold a minimum of 60 casings
• Molded of black, nylon reinforced plastic
AR15/M16 A2 Fixed Handle Rifles
(EL-AR-001)......................................................... $37.95
AR15/M16 “Flat-top” Rifles w/o A3 Type Carry Handle
(EL-AR-002) ........................................................ $37.95
C AR15/M16 A3 Removable Carry Handle
(EL-AR-003)......................................................... $37.95

www.bushmaster.com 41
magazines/
magazine accessories

mag-Brush
spec-ops mamBa comBat sling
•..Keeps.your.magazine.well.and.mags.clean.–.helps.keep.your. for telestockeD m4 & other
firing.chamber.clean carBines
AR15,.Mini.14.&.9mm.UZI (100240101)...................................................... $39.95
(MAG206)............................................................. $6.50 •.First.sling.designed.for.full.contact.engagement
.22;.10.mm;..38.Super •.Left-.or.right-handed.shooters
(MAG204)............................................................. $6.50
•..Offers.fast.and.easy.transitions.with.a.“tensioned.triangle”.
design.to.eliminate.interference.with.body-mounted.load.
bearing.equipment
•..Its.tubular.web.construction.is.super.strong,.and.twist-.and.
Magazine.. tangle-free
not.included •..Compatible.with.SOPMOD.components,.the.Mamba’s.static-side.
“traverse”.strap.prevents.sling.from.tangling.in.weapon’s.
mounted.sighting.or.lighting.systems.
ar15-type/m16 magazine
Dust covers •..Does.not.use.any.metal.snap.clips,.velcro.or.other.noise-making.
hardware
(ATI15223)............................................................ $7.50...
•..Flexible,.molded.black.rubber.caps.snap.over.the.magazine.top.
to.keep.out.dust.and.water
•..Sold.in.sets.of.four.—.designed.to.fit.standard.AR15/M16.
metal.magazines

mamBa comBat sling for fixeD


stock rifles
(100240201)...................................................... $39.95
•..Designed.with.a.custom.positioning.“Speed-Lok”.feature
universal magazine tool •..Spec..ops.Mamba.slings.allow.the.wearer.to.balance.and.posi-
(UMT)................................................................... $6.50... tion.the.weapon.according.to.situational.requirements
•..Pocket-sized.tool.that.will.load.or.unload.any.magazine.on.the. •..Unique.stretch.section.built.into.the.sling.allows.the.user.to.strike.an.
market.today opponent.with.the.weapon’s.muzzle.(”barrel.thump”).while.still.
•..Molded.of.heavy.black.plastic.—.includes.a.convenient.brass. keeping.the.weapon.slung.and.in.ready.position
key.chain •..Adjusting.buckles.allow.“pre-setting”.the.sling.for.operator’s.
body.size
Also.available:.
The.Spec-Ops.Universal.Mamba.Sling
(100240501)...................................................... $49.95
stripper clip For.ambidextrous.mounting.to.either.carbines.or.full.stocked.rifles.
—.with.all.the.spec..ops..Mamba.features.described.above.
(EGSS-01)........................................................ $.35.(ea.)
$.30.(ea..in.quantities.of.25.or.more) The.Master.Blaster.Combat.Sling
(100300101)...................................................... $29.95
Designed.for.combat.shotguns.and.tactical.rifles..Features.two.
adjustments.for.quick.transitions.&.body.sizing,.and.quality..
stripper clip guiDes tubular.web.construction.
(EGSS-02)......................... $1.00.(ea.)...
Stamped.steel.with.phosphate.finish

42 Phone orders: 1.800.998.7928


Bushmaster
moDular
accessory
system BIPoD
aDaPter
Government Issue slInG (YHM-638).......................................................... $31.95
(12624561).......................................................... $5.50 •..This.attachment.will.adapt.Harris.(or.other).bipods.to.the.
B.M.A.S.
•..A.1-1/4".wide.black.nylon.web.sling;.54".long,.with.two.black.
metal.buckles •..Triple.mount.or.other.accessory.rail.segments
•..Machined.from.aircraft.aluminum,.then.black..
anodized.to.a.mil..spec..finish;.with.steel.bipod.stud
•..Mounts.to.any.Picatinny.or.Weaver.type.rail

Bushmaster moDular
Button slInG DouBle BunGee accessory system
a
“throw & Go” sInGle PoInt raIl slInG mount
r
tactIcal carBIne slInG (YHM-9485S)...................................................... $24.50
(TGPT)................................................................. $39.95 •..Attach.a.sling.to.any.accessory.rail.(Picatinny.or.Weaver.type).
•..High.quality.black.nylon.tubing.with.internal.bungee.cords.make. with.this.B.M.A.S..rail.sling.mount
this.sling.uniquely.adaptable.to.tactical.situations •..Clamps.onto.a.rail.system.or.fore-end.rail.segment.and.locks.
•..The.sling.attaches.to.the.rifle.with.the.“button”.endplate. down.with.one.button.head.Allen.screw.
(shown.below),.and.offers.length.adjustment,.comfort.and. •..Includes.the.swiveling.sling.stud.below.mounted.on.an.anodized.
instant.readiness aluminum.base
Button.sling.endplate.in.position......
on.carbine.for.right-handed.carry
Bushmaster moDular
accessory system
swIvel slInG stuD
(YHM-9469)................................... $4.75
••..Fits
Fits.our.Four-Rail.Forearms.and.other.B.M.A.S...
our Four-Rail
accessories.to.provide.a.sling.attachment.point..
that.won’t.deflect.the.barrel.when.pulled.tight
Button slInG carBIne enDPlate
•..Rotates.360°.–.machined.steel.with.black..
•..This.phosphated.finished.steel.endplate.replaces.the.telestock. phosphate.finish.–.threaded.5/16.x.32
locking.collar.on.your.carbine.to.provide.a.solid.mounting.point.
for.the.one-point.sling.(above). •..Use.with.any.standard.Q.D..sling.loop
•..Heavy.duty.tab.slips.onto.the.button.for.a.secure.mount
Right-handed.shooter
Bushmaster slInG/BIPoD stuD
(M4-M16)........................................................... $19.95
A..F1009028.(Stud)............................................... $4.95
Left-handed.shooter B..F1009027.(Washer).. ......................................... $1.00
(M4L-M16).......................................................... $19.95
•..Mounts.to.any.standard,.quick..
detach-type.sling.swivel. A
QuIck Detach slInG swIvels •.3/8".shaft.is.threaded.10/32
(KNS-4).......................................................$12.95.(pair)
(pair) •.Use.a.#21.drill.bit.before.tapping
•..These.1.1/4".loop.quick.detach.sling..
B
swivels.are.heavy.steel.with.a..
phosphate.finish.and.a.screw..
locking.knob.to.ensure.that.the..
sling.won’t.work.loose.from.the.rifle..
swivel
•..Fits.any.firearms.with.standard.sling.swivel..
studs.installed

www.bushmaster.com 43
slings & bipods
steel side-sling AdApter
(12598617K)...................................................... $24.95
•..Allows.mounting.a.sling.to.the.side.of.the.barrel.for.easier.ready. Shown.installed.and.
position.carry separately.
•..Machined.from.gun.steel,.it.is..
adaptable.to.both.standard..
(.625".diam.).and.heavy..
barrels.(.750".diam.)

A2 buttstock sling stud


(KNS-5)......................................... $14.95 bushMAster ModulAr
•..This.phosphate.finished.steel.stud.replaces. Accessories systeM front
the.old.rear.sling.loop.on.standard.A2.solid. sight sling Mount
buttstocks (YHM-9468)........................................................ $31.95
•..Accepts.any.standard.Quick.Detach.type.sling.
any type •..This.Bushmaster.modular.accessories.system.sling.mount.installs.
swivel easily.(with.three.Allen.Screws).to.position.the.sling.along.the.
side.of.the.front.sight.for.a.comfortable.carry.
sling stud •..Includes.a.swiveling.stud.which.accepts.standard.quick.detach.
for MAgpul prs sling.mounts
(10011)......................................................$5.00.(pair)
....................................................$5.00
•..Replaces.one.of.the.four.socket.button.head.cap.screws.found.
on.the.Magpul.Precision.rifle.stock.(PRS).with.a.sling.stud
•..Threaded.straps.can.be.reversed.giving.8.choices.for.stud.placement Shown.
installed.and.
•..Each.BT14.comes.with.a.black.polymer.spacer separately.

bushMAster ModulAr
Accessories systeM tActicAl
sling Mount loops sling AdApter
•..For.vertical.carry.mounting,.the.front.loop.mounts.onto.the.sight. (1005-914-2942-T).............................................. $14.95
assembly •..A.tactical.sling.adapter.made.for.attaching.various.types.of.slings
•..For.buttstock.application,.attach.the.loop.onto.the.stock’s.rear. •..Allows.mounting.either.web.type.slings.or.those.that.have.
sling.loop “lobster.claw”.type.clips
•..Phosphate.finished,.heavy.spring.steel.wire •..Phosphate.finished.steel.adapter.plate.replaces.your.telestock.re-
Front.&.Rear.Set.—.2.Loops ceiver.end.plate.and.allows.ambi.sling.mounting.on.the.primary,.
(2698877K).......................................................... $8.50. or.offside,.shoulder.position.for.a.comfortable.“tactical”carry
or,.Sold.Individually
(2698877)................................................... $5.50.(ea.)
$5.50 (ea.)
Shown.
installed.and.
separately.

bushMAster
ster
ModulAr
Accessories systeM front
sling Mount & Accessory rAil
(YHM-9574)........................................................ $78.50
•..Designed.to.clamp.into.the.standard.AR.front.sight,.this.mount.
combines.a.sling.stud.and.Picatinny.rail.section.for.attachment.
of.flashlight.or.laser.accessories
•..Two.discs.fit.into.the.sight,.lock.together.with.Allen.head.screws,.
then.the.rail.screws.into.those.and.is.oriented.by.means.of.the.
large.knurled.nut
•..Anodized.aluminum.with.steel.screws.and.stud
44 Phone orders: 1.800.998.7928
pistol grips & buttstocKs
Harris ultraligHt bipods
•.Versatile,.sturdy,.light,.and.fast
fast
ergo grip tactical
•...Folding.legs.w/completely.ad-
deluxe pistol grip Kit
it
justable.spring-return.extensions.
extensions
(ARG-KIT)............................................................. $42.00
•.Sling.swivel.attaches.to.the.
clamp •..Ambidextrous.grip.that.mounts.universally.to.any.AR15-Type/
•..Quality.manufactured.with.heat.
heat M16.rifle.lower.receiver
treated.steel.and.hard.alloys.–.
– •..Injection.molded.with.an.overmolded.rubber.Sure.Grip™..
all.black.anodized.finish textured.finish,.and.offers.a.raised.rear.extension.for.improved.
•.Swivel.45°.for.instant.leveling. hand.web.support.and.weapon.control
on.uneven.ground.
busHMaster Modular
•..Leg.length:.13".Extended/9"Retracted;.Harris.Model.L.will.
mount.directly.onto.Varminters.&.Predator accessories systeM
Folding Foregrip
•..V.Match.rifles.require.installation.of.sling.bipod.stud
(YHM-9640). $79.50
•..Ribbed.AR.handguards.require.the.HE-001.adaptor
•..The.mounting.base.incorporates.a.push-button.mechanism.for.
•..For.mounting.to.accessory.rails,.use.the.Command.Arms.FBS- fast.deployment.
BP1.or.our.Bushmaster.modular.accessories.system.aluminum.
bipod.adapter •..Base.mounts.to.any.Picatinny.rail.with.one.Allen.head.screw.–.
can.be.mounted.to.fold.the.grip.forward.or.backward.according.
Harris.Model.L.—.for.XM15/AR15-Type/M16.&.others to.preference.or.other.accessory.usage
.(HE-002)........................................................... $118.95.
Harris.Bipod.Adapter.for.AR15-Type.Handguards
.(HE-001)............................................................. $14.95
tHe “gapper”
(SCH4085)............................................................ $3.95
a2 standard pistol grip •..Fills.void.between.the.pistol.grip.and.the.back.of.the.trigger..
(9349127).......................................................... $12.95 guard.—.molded.of.flexible.black.polyurethane
polyurethane
•..Standard.A2.hollow.pistol.grip.of..
molded.black.plastic.with.raised.finger..
ridges,.checkered.panels.and.a..
ribbed.backstrap
Pistol.Grip.Screw
ar15/M16 tactical grip
rip
(AN501D416-18)..................................................... $.65
(ARG01).............................................................. $63.95
Pistol.Grip.Washer
•..Adjustable.palm.swell.style.grip.adapts.easily.to.different.sized.
(MS35335-61)........................................................ $.45
hands.and.puts.pressure.in.the.palm.of.the.hand.to.allow.a.
deliberate.and.calculated.trigger.pull
pistol grip plug
•.Molded.of.heavy.black.plastic
(SCH-5)............................................ $4.50
•..Turns.any.standard.A2.pistol.grip.into.a.“stow-
away”.grip.for.storage.of.small.items
•..Molded
Molded.of.black.rubber,.snug.friction.fit.holds.it.inside.the.grip.
of black
cavity ar15/M16a2
stowaway grip
Hogue ar15/M16 (56PT87SPG2).. ................................................... $13.95
pistol grip •..This.M16A2.configuration.grip.—.with.a.serrated.backstrap.and.
•..Easy,.one.screw.installation.on.your.AR15/M16 finger.groove.—.features.a.trap.door.storage.compartment.for.
holding.cleaning.gear.or.small.parts.
Pistol.Grip.only
(15000).............................................................. $31.95 ergogrip
Vertical Fore-end
(ARG-FWD).............................. $52.95
•..Mounts.to.all.Picatinny.rail.and.Weaver.base.
type.rails

www.bushmaster.com 45
ACR ACCessoRies
ACR tRi-RAil hAndguARd
Black (F1000241) ............................................ $124.99
Coyote Brown (F1007088) ................................. $124.99
• Made of 6061-T1 aluminum
with a hard-anodized finish for
extreme durability.
ACR fixed stoCk • Free-floats the barrel, has an
Black (F1000268).............................................. $99.95 integral quick detach plate on
Coyote Brown (F1000269) ................................... $99.95 each side for sling attachment,
features MIL-STD Picatinny 1913 rails at 3 and 9 o’clock positions
• Made of high-impact composite polymer with a rubber butt pad (measuring 8 ½” with 20 slots) and the 6 o’clock position (mea-
• A-Frame design creates stabilized shooting support with a fixed suring 6” with 15 slots) and in conjunction with the monolithic
length of pull of 12.5.” An adjustable, locking cheek weld piece top rail provides a four-sided accessory mounting solution.
can raise ½” for better sight alignment with optics.
• A sling can be attached to two of the integral webbing loops, blue foRCe geAR 2-point sling
to a quick detach coupler that can swap to either side or to the
Black (F1000549)............................................... $49.95
single sling loop, which is also swappable.
Brown (F1000917) ............................................. $49.95
• A simple 2-point sling designed
specifically for the Bushmaster
ACR.
• Highly adjustable to fit a wide
range of users.
• Constructed of mil. spec.
push-button swivels and low
IR reflective webbing
ACR telesCoping/folding stoCk
Black (F1000263) ................................................ $149.95
Coyote Brown (F1000264) .................................... $149.95 blue foRCe geAR
udC single-point sling
• Made of high-impact composite polymer with a rubber butt pad
Black (F1054606)............................................... $42.95
• The seven-position telescoping stock has an adjustable length of
• Made with the finest web-
pull from 11” to 14”. The stock also unlocks and folds to the
bing and sewn with super
right side and is held open by a hinge detent, allowing for the
heavy-duty #138 bonded
rifle to become more compact but still able to be fired.
nylon thread.
• A sling can be attached to two of the integral webbing loops, to
• Military grade genuine
a quick detach coupler that can swap to either side, or to the
Fastex™ side release
single sling loop.
buckles on both the body
loop and at the connection to the weapon.
• Completely adjustable, ambidextrous, sized for use over body armor.
• Short universal loop adapter for connection to the weapon
mount and compatible with any other Blue Force Gear modular
SOC-C™ system adapters.
• Available in black. Made in the U.S.A.
ACR polymeR hAndguARd
Black (F1000234)............................................... $59.95
Coyote Brown (F1000235) ................................... $59.95
• Made of a high-impact composite polymer, reinforced with
a heat shield. The handguard free-floats the barrel, features
superior ergonomic shaping with a small forward lip to prevent
the hand from slipping off the front and the vented slots at the
3–6–9 o’clock positions are sized to accept Magpul MOE rail
sections.
• A single captured pin anchors the handguard to the trunnion.

46 Phone orders: 1.800.998.7928


MAGPUL ACCessoRies
essoRies
30 RoUNd PMAG
WiTH WiNdoW MAGAziNe
(F1001545) ....................................................... $17.95
• Constant-curve internal geometry
for smooth feeding
• Anti-tilt follower for increased
reliability Moe iLLUMiNATioN KiT
• Storage/dust cover • Includes everything needed to mount a 1913 Picatinny rail
• Stainless steel spring for corro- compatible weapon light to a MOE handguard.
sion resistance • Four-piece kit includes a short rail section, cantilever rail mount,
• Textured gripping surface two Surefire® optimized pressure switch pad mounts (both old
and new styles), and all mounting hardware.
• Ambidextrous MagLevel round indicator windows
Black (MAG402-BLK) .............................................$19.95
MissioN AdAPTABLe (MiAd) AR15-
TyPe/M16 GRiP BAsiC KiT
(F1001538) ......................................................... $35.95
• Grip kit has remov-
able/replaceable
front and rear
Front
panels for a custom
fit over multiple
MAGPUL MBUs (FRoNT) hand sizes
Black (F10001553) or Coyote Brown (F1006838) . $39.95 • Features improved
ergonomics and positive anti-slip texture on both sides and
rear backstrap
• Removable inner core that allows for storage (3 round plug
included); custom storage of batteries (waterproof) or bolt/firing
pin is available with optional cores
• Kit includes 3 size backstraps (S, M, L); 4 frontstraps, including
integrated enhanced trigger guard; 3 round core plug; and
installation hardware
Rear

MAGPUL MBUs (ReAR)


Black (F1001554) or Coyote Brown (F1006840) ... $57.95

MAGPUL Ms3 sLiNG


Designed and built to allow for weapon connector hardware to be
customized for shooter’s weapon set-up. Design adjusted to adapt
quickly between single and two-point configuration allowing for
easy transition from “weapon shoulder” to “reaction shoulder.”
MAGPUL PMAG 20 & 30 RoUNd • Compatible w/ASAP, RSA & Standard sling systems
W/BUsHMAsTeR LoGo
• Polymer construction for reduced weight and silent operation
30 Round
• Modular D-ring design
Black (F1001574) or Coyote Brown (F1001575) ...............$14.95
20 Round • Optimized for use with the ASAP & RSA
Black (MAG217-BLK) .........................................................$13.95 • Webbing adjustable for shooter size and preference
• Quick detach buckle for emergency situations
• High strength tubular nylon webbing
Flat Dark Earth (MAG5403-FDE), OD Green (MAG503-ODG) or
Black (MAG503-BLK) ............................................. $49.95

www.bushmaster.com 47
MAGPUL ACCESSORIES

PRS.Stock.–.left.side.
showing.std..butt.pad.
and.sling.loop

MAGPUL ASAP (AMbIdExtROUS


SLInG AttAChMEnt POInt)
PRS.Stock.with.slip-on.
•.ASAP.(Ambidextrous.Sling.Attachment.Point).allows.a.range.of. LimbSaver®.Recoil.Pad.
motion.greater.than.180.degrees,.enabling.true.ambidextrous. mounted.(sold.separately)
weapon.manipulation.for.both.left-.and.right-handed.shooters
•.Replaces.the.standard.AR15-Type/M4.carbine.stock.receiver.end.
plate,.providing.a.tactical.advantage.by.minimizing.snagging.
and.facilitating.easy.transition.to.and.from.weapon.and.reaction.
side.shoulders
(MAG500)........................................................... $29.95 .50.Cal.LimbSaver®

MAGPUL PRS PRECISIOn RIfLE StOCk


(MAG300-BLK)................................................... $255.00
•..The.Generation.II.Precision.Rifle.Stock.(PRS™).is.designed.to.be.
MAGPUL RSA (RAIL SLInG a.field.precision.stock
AttAChMEnt) •..Adjustable.for.both.height.and.length.of.pull,.at.its.shortest.LOP.
•.The.RSA.provides.a.forward.sling.attachment.point.for.the. it.is.about.the.length.of.an.A1.type.stock.and.extends.about.
Magpul.MS2.or.MS3.and.other.clip-in.systems. 1/2”.longer.than.an.A2.stock
•.Made.from.precision.cast.black.manganese.phosphatized.steel,. •..Features.a.billet.machined.buttplate.with.a.rubber.butt-.ad,.mil..spec..
the.RSA.attaches.to.any.standard.1913.Picatinny-spec.rail..The. phosphated.steel.shafts,.and.aluminum.ball.detent.knobs
RSA.has.been.proven.to.withstand.stress.tests.of.over.300.lbs. •..The.PRS.easily.replaces.the.standard.AR15/M16.stock.and.
(MAG502)........................................................... $29.95 uses.stock.A1/A2.rifle.length.receiver.extension.without.the.A2.
spacer.–.comes.with.all.mounting.hardware.and.two.ambidex-
CtR tELEStOCk trous.1.25”.sling.loops.that.can.be.positioned.front.or.rear
(MAG311-BLK).(F1001558).................................. $97.00 •.Weight:.1.855.pounds./.Retracted
•..Mounts.on.commercial.carbine.receiver.extension.tube.. •..Length:.10.45"./.Extended.length:.11.45"./.Height.adjust-
(not.included) ment:.0.75"./.Rubber.butt.pad.thickness:.0.25"
•..Premium.chrome-silicon.spring.provides.positive.locking.and.
long.service.life
•..Supplemental.friction.lock.eliminates.accuracy.robbing.wobble
•..Sloping.cheek.weld.combines.a.slim.profile.with.user.comfort
•..Shielded.release.latch.prevents.snagging.and..
accidental.operation
•..Side.mounting.slots.accept.optional.cheek.risers.for.non-AR15/
risers for non-AR15/
M16.applications
•..Compatible.with.Single-Point
Single-Point®.sling.mounts
sling mounts
•..Rear.—.Push-button.Q.D..sling..
Q.D. sling
mounts.accommodate.up.to..
up to
1.5".swivels.(ambidextrous)
(ambidextrous)
•..Rear/bottom.—.1.25".sling.loops
sling loops
•..Toe.—.Lanyard.hole.for.custom..
custom
para-cord.rigs
•.Black.in.color

48 Phone orders: 1.800.998.7928


MAGPUL ACCESSORIES
MOE POLyMER RAIL SECtIOnS
MOE polymer rail sections allow the attachment of various
1913 Picatinny spec rail mounted accessories to be installed.
• Designed for use with MOE handguards & standard plastic
handguards
• Use with lights, verticals grips & other rail accessories
ACS (AdAPtAbLE CARbInE/
StORAGE) StOCk • Available in 4 lengths
The ACS carbine stock is a drop-in replacement for the standard MOE RAIL L2, 5 slots — MAG406-BLK...................... $5.95
M4 stock body, offering enhanced strength, stability, battery/ MOE RAIL L3, 7 slots — MAG407-BLK...................... $6.95
equipment storage, and improved cheek weld.
• Reinforced polymer construction MOE RAIL L4, 9 slots — MAG408-BLK...................... $7.95
• Sloping cheek weld for comfort MOE RAIL L5, 11 slots — MAG409-BLK.................... $8.95
• Dual-side battery storage tubes & integral storage compartment
• Friction locking mechanism to eliminate excess stock movement
• 0.30” thick rubber butt pad included MOE StOCkS
ACS Carbine Stock Milspec (for mil. spec. diameter receiver Black MAG401-BLK ............................................. $ 59.95
extensions) LOP 11.1”-14.4” — MAG370-FDE, MAG370- Flat Dark Earth MAG401-FDE................................. $ 59.95
FOL, MAG370-ODG, MAG370-BLK ........................ $134.95 OD Green MAG401-ODG ....................................... $ 59.95
ACS Carbine Stock Commercial (for commercial diameter • Premium chrome-silicon lock spring provides positive locking
receiver extensions) LOP 11.1”-15.2” — MAG371-FDE, and long service life
MAG371-FOL, MAG371-ODG, MAG371-BLK ........... $134.95 • Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental
operation
• Side mounting slots accept optional cheek risers for non-
AR15-Type/M16 applications
• Compatible with Magpul ASAP® and other receiver-mount
sling attachments

MOE HAndGUARdS (CARbInE)


Black MAG405-BLK ............................................. $ 29.95
MOE CARbInE StOCk Flat Dark Earth MAG405-FDE................................. $ 29.95
The MOE carbine stock is a cost-effective drop-in replacement OD Green MAG405-ODG ....................................... $ 29.95
for the standard M4 stock body, offering enhanced strength • Replaces standard M4 carbine-type handguards
and ergonomics.
• Easy to install utilizing existing front handguard retaining cap
• Original Magpul engineering and material quality in an and delta ring
economical package
• MIL-STD 1913 Picatinny rail mounting slots at the 2–6–10
• A-Frame design o’clock positions
• Reinforced polymer construction • Reinforced, heat-resistant polymer construction
• Streamlined exterior • Integral aluminum heat shield
• Rubber butt pad and shielded operation lever included • Front lip and side extensions, shields hand from hot gas block
MOE Carbine Stock Milspec (for mil. spec. diameter receiver
extensions) LOP 10.4”-13.7” — MAG400-FDE, MAG400-
FOL, MAG400-ODG, MAG370-BLK .......................... $59.95
MOE Carbine Stock Commercial (for commercial diameter
receiver extensions) LOP 10.7”-14.5”— MAG401-FDE,
MAG401-FOL, MAG401-ODG, MAG401-BL ............... $59.95

www.bushmaster.com 49
pistol grips & buttstocks

Moe hanDguarDs (MiD-length) Moe grips


Black.MAG418-BLK................................................ $34.95 Black.MAG415-BLK................................................ $20.95
Flat.Dark.Earth.MAG418-FDE.................................. $.34.95 Flat.Dark.Earth.MAG415-FDE................................... $20.95
OD.Green.MAG418-ODG........................................ $.34.95 OD.Green.MAG415-ODG......................................... $20.95
•.Replaces.standard.AR15-Type.mid-length.handguards •.P. rovides.Magpul.quality,.feel.and.durability.in.an.economical,.drop-in.
upgrade.for.the.standard.AR15-Type/M16/M4.pistol.grip
•..Easy.to.install.utilizing.existing.round.or.triangular.front.
handguard.retaining.cap.and.delta.ring •..Ergonomic,.hand.filling.design.combines.aggressive.texturing.with.
storage.core.capability
•..Slots.at.the.2–6–10.ten.o’clock.positions.for.mounting.MIL-STD.
1913.Picatinny.rails •..One-piece.reinforced.polymer.construction.has.the.durability.to.
withstand.operational.environments
•.Reinforced,.heat-resistant.polymer.construction
•..Accepts.optional.storage.cores.for.gear.stowage,.includes.basic.grip.cap
•.Integral.riveted.aluminum.heat.shield
•.All.mounting.hardware.included
•.Front.lip.and.side.extensions,.shields.hand.from.hot.gas.block

Moe hanDguarDs (rifle) liMbsaver® slip-on


Black.MAG419-BLK................................................ $39.95 recoil paD
Flat.Dark.Earth.MAG419-FDE................................... $39.95 (LimbSaver-M)......................... $36.99
(LimbSaver-M)
OD.Green.MAG419-ODG......................................... $39.95 •..A.slip-on.recoil.pad.that.offers.easy.installation,.
recoil-reducing.technology.and.molding.from.
•..Replaces.standard.M16-Type.rifle-length.handguards proprietary.NAVCOM™.noise.and.vibration.
•..Easy.to.install.utilizing.existing.triangular.or.round.front. control.material.
handguard.retaining.cap.and.delta.ring
••..Displace
Displace.shock.on.a.0.to.2500.Hz.spectrum.and.ensures.maximum.
shock 0
•..Slots.at.the.2–6–10.o’clock.positions.for.mounting.MIL-STD. shock.relief.with.excellent.protection.for.the.shooter
1913.Picatinny.rails
•..Fits.stocks.from.4.13/16".height.x.1.5/8".thickness.up.to.5.1/8".
•..Reinforced,.heat-resistant.polymer.construction x.1.3/4",.and.the.1".thick.pad.will.add.1".length.to.trigger.pull
•..Integral.riveted.aluminum.heat.shield
•.Front.lip.and.side.extensions,.shields.hand.from.hot.gas.block
•..Relieved.area.at.the.top.rear.accommodates.most.overhanging.
optic.mounts hook style buttstock
uttstock
for ar15/M16
(16-01-02).......................................................... $44.95
•..A.molded.fiberglass.polymer.stock.offering.the.eye.relief.of.the.
newer.M16A2.type.with.1".additional.length.of.pull
•..The.“hook”.gives.added.stability.to.sandbag.rest.when.shooting.
with.left.hand.across.the.body.and.into.the.hook
Mvg™ Moe vertical grip •..Uses.the.standard.issue.buttplate.but.offers.almost.double.the.storage.
Black.MAG415-BLK.................................................$19.95 —.easily.replaces.the.standard.stock
.Flat.Dark.Earth.MAG415-FDE...................................$19.95
Delta style stock
OD.Green.MAG415-ODG..........................................$19.95 cheekpiece
Foliage.MAG415-FOL..............................................$19.95 (6200)............................. $74.50
•.Designed.for.use.with.MOE.and.ACR™.handguards •..A.quality.accessory.for.your.A2.buttstock.—.designed.to.improve.
•.Basic,.lightweight,.cost-effective.vertical.fore.grip accuracy.by.eliminating.parallax.problems
•.Attaches.directly.to.MOE.and.ACR™.handguards.without.any.rail. •..It.shoulders.easily.and.provides.the.proper.cheek-weld.for.
needed telescopic.sight.use
•.Shape.is.ergonomically.designed.for.use.as.a.traditional.vertical.grip •..Installs.with.no.alteration.to.original.butt.cap.or.sling.loop,.and.is.
designed.specifically.for.the.new.style.A2.stock.(can.be.modified.
•.Optimized.for.use.with.the.“thumb.break.method”.of.shooting.as.
to.fit.the.A1)
taught.by.Magpul.DynamicsSM

50 Phone orders: 1.800.998.7928


pistol grips & buttstocks
complete A2 trApdoor
buttstock Assembly
(A2.STK.COMP).................................................... $79.95
•..The.newer.A2.design.is.5/8".longer.than.original.A1.for.greater.
shooting.comfort.and.improved.trigger.pull.length.of.13.5".
•..Trapdoor.storage.space.in.the.buttstock.provides.room.for.spare. keleton stock
the skeleton
parts.or.an.Otis.buttstock.stowage.cleaning.kit.(see.Gunsmith- .(SKELETON.STOCK)............................................. $112.95
ing.section) •..Radically.different.stock.design.for.all.AR15-Type.rifles.offers.a.
•..Includes.buttstock.w/ comfortable.neoprene.foam.sleeve.and.a.skeleton.frame.
trapdoor.buttplate,.sling. •..A.comfortable.rubber.buttplate.is.included,.as.is.a.swiveling.sling.
loop,.buffer,.buffer.tube,. loop.that.can.be.mounted.forward.left.or.right,.or.on.the.bottom.
buffer.spring,.spacer.and. of.the.buttplate
vented.buttplate.screw •..Length.10.5"./.Weight.14.03.oz..
*.This.does.not.include.buffer.tube,.buffer.or.spring.(use.already.
existing.parts.or.buy.the.kit.below)
six position Fiberite
telescoping stock
Assembly
(1005-087-8988-PK)......................................... .$106.95
•..Our.standard.telestock.–.a.heavy.duty.design.incorporating.a.six.
position.latch.assembly.
•..Ribbed.body.offers.extra.strength
•..A.six.position.receiver.extension,.machined.from..
solid.aluminum.extrusion. shorty skeleton stock kit
•..Lower.lip.face.acts.as.a.timing.edge.to.insure.the.buffer.retainer. including cAr buFFer And spring
is.held.correctly.and.the.extension.is.positioned.correctly (SKEL-SH-STK-KIT)............................................... $148.95
•..Similar.to.the.original.Skeleton.Stock.above,.but.with.an.overall.
complete Fixed position tele- length.of.7.3/4".-.weight.of.12.8.oz..
style stock Assembly
•..The.neoprene.sleeve.around.the.buffer.tube.offers.a..
(1005-087-8988PEK)......................................... $106.95 comfortable.cheek.weld
•..Includes.carbine.length.receiver.extension,.buffer.and.spring
•..A.1/2".rubber.recoil.pad,.a.sling.swivel.(mounts.either.left.or.
right.side,.or.on.buttplate.base),.a.short.buffer.tube,.a.CAR.
originAl style Fiberite
buffer.and.spring,.and.all.necessary.screws.are.included.to.swap.
telestock Assembly
over.from.any.AR-Type.rifle.or.carbine
(ALEO-001K)...................................................... $106.95
Shorty.Skeleton.Stock.without.those.parts
•..Original.style.fiberite.telestock.body.with.a.four.position.telescoping.
(SKEL-SH-STK).................................................... $134.95.
aluminum.extrusion.extension.tube
•..Original.design..
metal.telestock..
skeleton stock
buffer.with.cylindrical..
cylindrical
weights.and.the.carbine.length.buffer..
carbine length buffer kit For
spring.are.included
included chAngeover From
•..Has.mil..spec..tubetube A telestock
(SKELETON-STOCK-K)........................................... $154.95
skeleton stock •..Includes.Skeleton.Stock.with.butt.pad.and.hardware.(as.above),.
extended recoil pAd
d plus.standard.buffer.tube,.standard.buffer.and.spring
(SKEL-1IN-BUTTPAD)................ $13.95
•..Extra.thick,.molded.rubber.recoil.pad..
replAcement FoAm sleeves For
fits.all.the.skeleton.stocks.including..
the.Shorty.Model skeleton stocks
weight
•..1.inch.in.thickness,.and.3.2.oz..in.weight
Standard.Stock.(SKEL-FOAM-OT-8.2).......................... $4.50
Shorty.Skeleton.Stock.(SKEL-FOAM-OT-5.5)................ $3.95
•..Installs.easily.in.place.of.existing.pad.—..
screws.are.included NOTE:.These.sleeves.install.easier.with.WD40.

www.bushmaster.com 51
pistol grips & buttstocks
extended buttplate
for ar15/M16
(16-09-02) .........................................................
......................................................... $24.50
• Glass-filled, black plastic composite buttplate 
r-15 stock •  Adds 1 1/4” length to the standard issue AR15/M16 buttstock 
•  Features Advantage® Max1™ camouflage pattern • Does block access to the buttplate trapdoor
•  Heavy duty design incorporating a 6-position latch assembly • Also fits on the Stubby Stock
• Ribbed body offers extra strength
•  Six position receiver extension, machined from solid aluminum 
extrusion 1 2 3
•  Lower lip face acts as a timing edge to insure buffer retainer is  8
9349119:   4
held correctly and the extension is positioned correctly Includes Stock, 
R15 Tele (C1005-087-8988) .............................. $139.95 Trapdoor Buttplate &  5 6 7
Sling Loop

cheekpiece for individual a2 solid


bushMaster buttstock parts
six position 1. A2 Solid Buttstock (9349119) .......................... $37.50
telestock 2. Trapdoor Buttplate Assembly A2 (9381380) ........ $21.50
(7200) ............................................................... $37.50 3. Buffer – Standard (8448615) ........................... $15.95
•  Designed to offer excellent cheekweld and appropriate head position  4. Stock Spacer & Screw (A2 STK SPAC/SCRW)  ........ $6.50
for scope and optic use, it fits the newer Bushmaster six-position 
5. A2 Buttplate Screw (9349128) ........................... $3.50
“ribbed body” telestocks
6. A1 Buttplate Screw (8448627) ........................... $3.50
•  Snaps securely onto the telestock body 
7. Receiver Extension — Standard A2 (8448581) .. $21.95
•  Includes a watertight small parts storage compartment in the upper 
portion of the cheekpiece, sealed with a rubber o-ring screw-in plug 8. Buffer Spring —Standard (8448629) .................. $5.95

c
cheekpiece for 1 3
older fiberite
telestocks
t 2 4,6 5,7
Telestock   8
(7000) .......................... $37.50
(7000) Bodies are 
• This
•  This telestock cheekpiece allows the use of scope, laser or night 
telestock cheekpiece 9 10 11 12 13 NOT available 
vision devices with comfort separately.
•  Molded of tough black plastic, it snaps on to most older style  individual telestock parts
fiberite telestocks with a secure pressure fit and features a built- 1. Buffer – Telestock (1005-914-4578) ................. $16.95
in watertight small parts storage compartment that is sealed  2. Buffer – Telestock (8448730-M2) ..................... $26.50
with an o-ring screw-in plug at top rear of the unit     (Heavy weight for the M16M4 machine gun)
•  Helps take all the “rattle” out of fiberite telestocks 3. Buffer Spring (Telestock) (1005-914-4564) .......... $5.50
Note:  For use on fiberite telestocks — will only fit the original  4. CAR Receiver Extension (1005-914-2929-6) ........ $26.50
type telestocks    (for the newer style 6-position telestocks)
5.  Telestock Locking Nut (5310-917-1154) ............... $7.50
A B (for the newer style 6-position telestocks)
6.  CAR Receiver Extension (1005-914-2929-P) ........ $26.50
(for old style 4-position telestocks)
7.  Telestock Locking Nut (5310-917-1153) ............... $7.50
(for old style 4-position telestocks)
rubber telestock tock butt pads p 8. Telestock Receiver Plate (1005-914-2942) ............ $7.50
•  These molded black rubber pads securely fit the buttplate of the  9. Telestock Slide Locking Pin (1005-914-3229) ........ $6.50
telestock to offer recoil reducing comfort and positive, non-slip 
10. Telestock Lock Pin Spring (1005-916-9178) ........ $1.00
shouldering
11. Telestock Latch (1005-087-8987P) .................... $7.50
A. “Ribbed” Style Telestocks (2698828) ................. $20.50 
12. Telestock Lock Pin Nut (5310-917-1215) ............ $4.50
B. Older Style Telestock (2698827) ....................... $16.95 
13. Telestock Lock Pin Roll Pin (MS16562-106) ......... $ .50
Also fits the Carbon 15 rifles with the original design buttstock and 
can be modified to fit new reinforced Carbon 15 buttstock

52 Phone orders: 1.800.998.7928


Handguards & accessories

busHmaster master modular


accessory system
Handguard rails
busHmaster
usHmaster modular • Add an accessory mounting point to any standard
accessory system rifle or carbine handguard with these Picatinny
Four-rail split Handguards configuration rails
• The two piece design of these B.M.A.S. handguard sets allows • Mounting requires removal of handguard and inner
quick and easy installation of a Picatinny four-rail accessory shield – they are screwed to the handguard through the existing
system on most AR-Type rifles* vent holes
• Machined of quality aircraft aluminum, they snap right in place • CAR-length rail will fit on a rifle-length handguard
of standard carbine or rifle handguards, and offer four full • Due to possibility of movement, we do not recommend installa-
length Picatinny rails for the flashlight/laser sight accessories tion of optics or lasers on these rails
of your choice B.M.A.S. Rail for Rifle Handguard
• Rails are positioned at 12–3–6–9 o'clock (YHM-Hgd-Rail-Rif) ................................................ $60.50
• Top handguard can be used in conjunction with an M203 B.M.A.S. Rail for CAR Handguard
grenade launcher (YHM-Hgd-Rail-CAR) .............................................. $40.50
• Vented to keep your barrel cool, finished in mil. spec. matte black
anodize to eliminate glare and protect against corrosion
For Carbine
(YHM-9670) ..................................................... $191.50 B
A
For Rifle
(YHM-9803) ..................................................... $212.95
*Note: These sets will not fit our DCM or gas piston carbine. sure-grip
ure-grip panels For
multi-rail Fore-ends
• Black rubber grip panels for all rail fore-ends – with
Bushmaster logo molded in
• Snap tightly onto the rails for a non-slip grip, rail protection and
handling comfort
A. Sure-Grip Full Length Rail Cover
(SCH-6L) ............................................................. $10.95
5 3/4" long for full length coverage on carbine fore-ends. Covers
busHmaster modular fifteen rail slots. Molded of black rubber with 3 Bushmaster logos
accessory system Four-rail between raised ribs.
Free Floater Forearms B. Sure-Grip 1/3rd Length Rail Cover
• Four Picatinny rails are machined into these free floating fore- (SCH-6) ................................................................ $3.95
ends to offer your AR type firearm unlimited mounting options
1-3/4" black rubber grip panel (covers five rail slots)
for sights, scopes, grips, lights and lasers for Picatinny rail fore-ends — with BFI logo.
• Venting slots all around aid in barrel cooling, and rail front edges
are drilled and tapped to accept the B.M.A.S. swivel sling stud
low proFile rail covers overs B
• The rifle model fits 20" and longer barrels; the carbine version is
designed for 16" barrels • Covers protect your hands from sharp rail edges
A
• Assemblies include forearm, barrel nut and jam nut (barrel • Smooth low profile appearance and protect
disassembly is required for installation) rail areas from damage
Rifle Length • Molded of black santoprene in two lengths — easily cut for
custom applications
(YHM-9480) ..................................................... $169.95
A. Five Slot Low Profile Rail Cover
Four-Rail Carbine Length
(SCH-4370) .......................................................... $3.95
(YHM-9479) ..................................................... $148.95
B. Full Length Low Profile Rail Cover
*Note: This unit will not fit our gas piston carbine.
(SCH-4373) ........................................................ $11.95
www.bushmaster.com 53
Handguards & accessories

a.r.M.s. #50 M-cV s.i.r.


systeM for a3 carbines
(ARMS-50M-CV SIR) ........................................... $319.00
• Carbine length 5.56mm/.223 cal. “free-float”system that can be
installed in less than 5 minutes directly to the standard barrel nut
carbine & rifle lengtH
(without the delta ring)
M203 Handguards
• The front sight, gas tube, front handguard retaining cap, barrel,
• Bottom is open to allow attachment of the M203 and barrel nut do not need to be removed for installation, and
Grenade Launcher or similar type flare launchers no special tools are required (the S.I.R. std. sling swivel is
• Government issue, molded black nylon with internal aluminum usable for installation as it is ground with a “screwdriver blade”
heat shields on its end)
• Snap into the handguard cap and delta ring in place of standard • Perfect alignment with the receiver can be accomplished via built
handguards in alignment anti-rotation locking tabs
• Provides the leverage needed to compress the weld spring inside • Weighs 8.6 oz., includes Q.D. indirect air flow heat shields and
the delta ring, and eliminates the need for a second pair of hands thoroughly vented for superior barrel cooling
to help remove AR15/M16 two-piece handguards • Rail segments at the 3–6–9 o’clock positions can be
For Carbine exchanged, repaired or replaced without removing the top rail
(12990563)....................................................... $51.50
For Rifle
(8448377)......................................................... $46.50

Vented free-float tube fore-end


(VAR-01K) ........................................................... $95.95
a.r.M.s. #51c sliMline s.i.r. • Vented, free-floating, three piece fore-end can be
easily installed for improved accuracy on your rifle
systeM for a1/a2 carbines witH
solid carry Handle • A new barrel nut and locking ring replace your existing barrel nut
(front sight, gas tube and barrel nut removal is required)
(ARMS-SIR51-C)................................................. $429.95
• Aluminum free-float tube screws on, and after “timing” the cooling
• High quality technical fore-end for the AR15-Type
vents a locking ring holds it in position
carbine combines barrel free-floating, light weight
and a multitude of accessory attachment rails • The center of the tube is knurled for a non-slip grip, and a
standard stud is included for bipod or sling
• Slimline Model 51C in the A.R.M.S. S.I.R. system is
intended to fit the A1/A2 solid carry handle carbines • High quality aircraft aluminum — black anodize finished
• Leaves barrel free-floating from the barrel nut forward, and is
approximately 1/4" narrower than other S.I.R. system models
• The S.I.R. Model 51C clamps solidly onto the upper receiver’s
fixed carry handle (both the carry handle channel and the
handle front support, utilizing two A.R.M.S.® self locking
thumbnuts) to provide an extremely rigid fit with no movement
of rail or attachments
• Extended bi-level rail platform will mount various scopes,
and red-dot or holographic sights, and offers the possibility
of forward mounting optics to co-witness with the iron sights
through the channel in the upper rail
• Total weight is 18.9 oz. including the two side and one bottom
accessory rail segments and sling swivel
NOTE: This will not mount on the A3 Removable Carry Handle.
For alternate optics mounting options for the A1/A2 solid
carry handle carbines, see also the A.R.M.S. #39A2 Bi-Level Rail
(ARMS-39) ................................................................ $148.95
54 Phone orders: 1.800.998.7928
a2 rifle Handguards
(9349059)................................................ $21.95.(pair)
•..Compression.molded.of.black.polymer.
composite.material.(not.injection.
molded.—.these.will.not.melt.during.
full.auto.or.rapid.fire)
busHMaster V MatcH
•..Non-reflective.matte.black.finish.and.are.designed.to.fit.rifles.
with.the.triangular.handguard.cap “free-floater” tubular
aluMinuM fore-ends
•..Internal.aluminum.heat.shields.are.included.to.protect.hands.
from.barrel.heat.buildup •..Hard.anodize.finished.aluminum.assemblies.fit.over.standard.
and.match.profile.barrels.“free-floating”.them.from.receiver.
forward.for.optimum.accuracy
a2 carbine lengtH •..Screwed.directly.onto.the.upper.receiver.in.place.of.existing.
Handguards handguards,.barrel.nut.and.handguard.cap
(1005-914-4572)...................................... $21.95.(pair) •..Installation.requires.removal.of.the.front.sight.base.
•..Injection.molded.of.black.polymer.composite.–.internal. For.Rifles
aluminum.heatshields.included (SGW-02B).......................................................... $63.95
•..Can.only.be.used.with.the.round.handguard.cap For.Carbines
NOTE:..Rifle-length.handguards.fit.into.the.triangular.cap..Standard. (SGW-01K).......................................................... $63.95
carbine.handguards.fit.into.the.round.cap..M4.(oval.profile)..
carbine.handguards.fit.into.either.the.round.cap.or.the.“notched”.
round.cap..See.handguard.cap.prices.and.part.numbers.

M4 dual HeatsHield
Handguards
(1005-914-4574)...................................... $45.50.(pair).
daniel defense oMega rail
•..Dual.heatshields.ef- (DD-OMEGA7)..................................................... $289.00.
fectively.increase.barrel.
cooling,.especially.in. •.Free-floating.barrel.design
rapid.fire •.Lightweight
•..Originally.designed.for. •.User.installed.with.no.special.tools
use.on.full-auto.machine. •.ZERO.modification.to.host.weapon
guns,.this.improved.handguard.set.will.fit.most.carbines.with.
•.Uninterrupted.upper.rail.platform
either.type.of.round.handguard.cap
•..Integral.QD.sling.swivel.mounts.with.limited..
•..Molded.of.black.thermoplastic.composite.material.with.heavy.dual.
rotation.feature
aluminum.shields.(one.finished.black/one.silver)
•.Aircraft.grade.aluminum
Also.available:
•.Military.specification.Type.III.hard.coat..
M4.Single.Heatshield.Handguards
anodized.finish
(1005-914-4573)...................................... $42.50.(pair)
•.Military.specification.fasteners
•.Military.specification.1913.Picatinny.rails
•.Will.fit.our.gas.piston.conversion.kit

snap-on forearM ligHt Ht Mount


•..This.heavy.plastic.base.(shown.installed,.and..
installed, and
separately).snaps.onto.AR-15/.
M16.rifle.fore-ends.(won’t.fit..
the.CAR.handguards)
•.Detents.grip.the.fore-end.vent.holes.for.a.firm.mount
for firm mount
•..On.the.side,.a.rail.segment.is.mounted.which.is..
designed.to.accept.a.variety.of.tactical.flashlights
(HPM3)............................................................... $31.95

www.bushmaster.com 55
gunsmithing Accessories

surefire g2™
2™
nitrolon® flAshlight
(G2-BK)............................................................... $36.00.
rAil mount switch Kit for
•..A.compact.(palm.size).high-intensity.incandescent.flashlight.for. streAmlight/surefire flAshlight
tactical,.self-defense.and.general.use.with.a.tough.polymer.body
Pressure switches
•..Its.smooth,.brilliant,.pre-focused.tactical-level.beam.has.four.times.the. (SCH-4366-KT)..................................................... $12.95
light.of.a.two.D-cell.flashlight.–.bright.enough.to.temporarily.blind.
and.disorient.an.opponent •..3.piece.kit.to.mount.Streamlight.or.SureFire.switches.onto.any.
Picatinny.rail.without.adhesives.or.Velcro
•..Small.size,.light.weight.and.high.output.make.it.a.perfect.
everyday.carry.light •..Base.snaps.on.the.rail.and.the.insert.encapsulates.the.switch.
pad.—.molded.black.santoprene.thermoplastic
•..Rugged,.lightweight,.corrosion-proof.Nitrolon.polymer.body.(black.
part.number.listed.here.—.olive.drab,.tan.or.yellow.flashlights.
gunsmithing tools & suPPlies
available.on.special.order)
Our.company.policy.is.to.offer.gunsmithing.assembly.at.no.charge.when.
•.O-ring.sealed,.weatherproof.
parts.are.purchased.from.us.(with.the.exception.of.sight.bases)..We.
•..Tailcap.switch:.press.for.momentary-on,.twist.for.constant-on. will.also.offer.our.professional.gunsmithing.services.to.any.customers.
•..Switch.lockout.prevents.accidental.activation.during.transport. who.care.to.ship.us.their.AR15-Type.firearms.or.assemblies.for.repair.or.
or.storage. buildup.–.and.we.will.work.on.brands.other.than.Bushmaster..Gunsmith-
•.Max.output:.65.lumens ing.time.is.charged.at.$40.00.per.hour,.and.we.charge.a.flat.$16.50.
fee.for.return.shipping.of.your.rifle,.upper.or.parts..For.an.estimate.on.
•.Run.time:.60.minutes.
your.gunsmithing.needs,.call.1-800-998-7928.during.business.hours,.
•.Length:.4.90”/.Weight:.4.1.oz.. or.e-mail.a.complete.description.of.your.needs.to:.Techsupport@
•.Batteries:.Two.123A.lithium bushmaster.com

surefire m79
5.56mm nAto cAliBer
flAshlight mount
go-gAuge
(M79)................................................................. $38.00.
$38.00
•..Used.to.determine.adequate.headspace
•..A.sturdy.aluminum.and.polymer.mount.that.will.clamp.any.1”.
diam..flashlight.to.any.rifle.or.carbine.equipped.with.a.Picatinny. •..Chamber.depth.enough.for.oversized.bolt
accessory.rail (HGO223G)......................................................... $30.00
•..Flashlights.are.held.with.an.adjustable.cam-type.locking.clamp 5.56mm
nAto cAliBer
no-go gAuge
•.Used.to.determine.excess.headspace
•.Chamber.depth.too.great,.or.undersized.bolt
(HGO223N.............................................................$30.00
5.56mm nAto
surefire scout light m600B
cAliBer field gAuge
(M600B)........................................................... $310.00.
•..Used.to.determine.overly.excessive.headspace.due.to.chamber.
•..Two-battery.Scout.Light.from.SureFire.clamps.to.any. and.bolt.wear.
Picatinny.rail.by.means.of.a.knurled.thumb.screw.on.its.
(HGO223F).......................................................... $30.00
rigid.M75.rail.mount
•..Powerful.LU60A.incandescent.lamp.module.produces.65.
lumens.of.light 308 cAl. heAdsPAce gAuge
•..A.momentary-on.remote.tape.switch.is.included.as.well.as.a.
308.Cal..Go-Gauge.
tail.cap.on/off.switch. (HGO243G)......................................................... $30.00
•..Two.SureFire.lithium.SF123A.3.0.volt.batteries.(10-yr..shelf.life). 308.Cal..No-Go.Gauge
(HGO243N)......................................................... $30.00
•..Output/run.time.—.max..output.of.65.lumens.with.a.
60-minute.run.time. 308.Cal..Field.Gauge
•..Click.on/off.and.momentary.switch.
(HGO243F).......................................................... $30.00
•..Mil..spec..Type.III.hard-anodized.aluminum.body Also.available.—.headspace.gauges.for..50.BMG.caliber...
Call.for.pricing..

56 Phone orders: 1.800.998.7928


BushmAster stAndArd u. s. goV’t.
Armorer’s tool Kit tech mAnuAls
• Kit includes: dual slot barrel vise jaw blocks; drift punches; barrel • Complete maintenance, repair
wrench; receiver push pin tool; technical service manual; sight and troubleshooting information
tool; cleaning kit; spring package w/standard buffer spring; and for either the A1 or A2 model
assorted pins and caps For M16A2
(Part #s A1 ARM KIT/A2 ARM KIT) ..........................$85.95 (TM9-1005-319-23P)........................................... $11.95
For M16A1
deluxe Armorer’s tool Kit (TM9-1005-249-24P)........................................... $11.95
• A complete tool kit for all necessary repairs and installations
(choose from A1 or A2 version — tools differ)
• Kit includes: dual slot barrel vise jaw blocks; drift punches;
Armorer’s barrel wrench; 20-page technical manual; sight tool;
cleaning kit; telestock wrench; go-, no-go- and field headspace
gauges; firing pin protrusion gauge; receiver push pin tool; drift Punch set
spring package with standard buffer spring; and assorted pins • Set of four excellent Starrett
and caps punches — 1/16”; 3/32”; 1/8”; 5/32”
(Part #s A1 ARM KIT / A2 ARM KIT) ..................... $180.95 (STA PNCHSET) ................................................... $22.95

mAster Armorer’s tool Kit the BushmAster


• Kit includes: Armorer’s Action Block kit; lower receiver vise block; dVd
heavy duty combination Armorer’s wrench; barrel vise jaw • Complete assembly and
blocks; drift punch set; rifle cleaning kit; .223 go/no-go/field buildup details for the
headspace gauges; firing pin protrusion gauge; A1 and A2 sight XM15/AR15/M16 rifle
tools; receiver push pin tool; 200-page M16 A2 Marine Corp. (ADS-002) ...................$25.95
technical manual; M16 A1 technical manual; Armorer’s DVD;
Tetra gun care kit; 2 complete spring packages (with carbine
& rifle buffer springs); and an assortment of pins, detents and
caps for fast and foolproof assemblies and installations the BushmAster Video (Vhs)
(Part #s A MARM KIT) ......................................... $319.95 (ADS-001) ......................................................... $21.95
Ar15 multi-tool
• Adjusts front sights
BArrel Vise • Cleans bolt faces
JAw BlocKs
• Includes non-mar disassembly punches
• Dual slot design for the for take down and lower receiver pins
installation of barrels, front
• Emergency Phillips screwdriver or scraper
sight removal rear sight work,
cleaning, or any job that requires • Lanyard loop to tie it to your web gear or tool bag
immobilization (BT-MCT)............................................................. $12.95
• Not limited to AR15/M16 service work
(AMER-001) ........................................................ $15.95

BushmAster gun cleAning PAd


• Perfect for rifles, shotguns, muzzleloaders — protects your
table and firearms from scratches and spilled cleaning fluids
receiVer Push Pin tool
• Bonded waterproof backing prevents any “soak-through”
• Designed to push out tough takedown and pivot pins in your lower
receiver. Machined from black nylon material so it won’t mar the • Absorbent, felt-like fabric
gun’s finish. • Keeps parts organized and in place
• Fits into the buttstock storage compartment • Durable, stain resistant and long lasting
(IMP-1)................................................................. $7.50 • No. 1 seller in the country
• Made in USA
(10012)............................................................. $12.95

www.bushmaster.com 57
GunsmithinG accessories
Bushmaster operatinG
& safety manual
heavy Duty comBination
• Field stripping, cleaning, maintenance ar15 armorer’s Wrench
on all Bushmaster XM15 and Carbon
15 models — with parts diagrams, • Two-sided wrench at one end fits either multi-point or peg style
safety tips and sight zeroing barrel nuts on barrels up to 1” in diameter, and a breaker bar or
torque wrench can be fitted into the 1/2” square drive opening
(BFIMANA2OP) ...................................................... $2.95
• Other end fits telestock locking nuts, and a large flat screwdriver
ar15/m16 blade is also included for use on standard buttstock screws
hanDGuarD tool • Two other slots fit A1 and A2 birdcage flash hiders and receiver
(HGD-Tool) ............................. $21.95 extensions
• Provides the leverage needed to compress (1570)............................................................... $22.50
the weld spring inside the delta ring
• Manufactured from strong, powder
coated, 1/4" round steel stock with ar15 comBination armorer’s
protective vinyl coatings Wrench for neWer telestocks
• A newer design Armorer’s wrench that fits the latest model
telestocks with the cuts on the locking ring
• Weight: 1.125 lbs / Length: 12.25” overall
Bolt carrier carBon scraper (1570-4) ............................................................ $23.50
• A sturdy workbench tool for the AR15/M16 gunsmith
• Makes quick work of cleaning out carbon buildup
inside the bolt telestock tock Wrench for neW ne
• Weight: 1.25 lbs. / Length: 13” style (riBBeD) telestocks
(MBC-02)............................................................ $31.95 • An economical tool for the locking nuts on newer-type telestocks
(fixed and collapsible)
(223-telewrench2) ................................................. $6.50

siGht aDjustment tools


• Adjustment tools for A1 &
fielD Bolt carrier A2 front sights, and A1
carBon scraper rear sight
• Tool steel scraper quickly removes carbon buildup • Machined steel with black
in all AR15/M16 bolt carriers oxide finish — designed to fit in the stow grip or
(BC01) ............................................................... $20.95 buttstock compartment
For A1 Rifles (Round Sight Post)
(RAY-006) ............................................................. $8.50
For A2 Rifles (Square Sight Post)
firinG pin protrusion GauGe (RAY-005) ............................................................. $8.50
• Checks firing pins for minimum (.028”) and maximum (.036”)
protrusion loWer receiver
• Weight: 1.125 lbs. / Length: 12.25” vise Block
(MMT-0005) ....................................................... $15.95 • Clamp it in a vise and its magazine
shape locks into the magazine well of
any AR15/XM15/M16 lower receiver
armorer’s Barrel for assembly or maintenance work
Wrench • Machined from high density polyethylene. Use to mount lower receiver
• For AR15/M16 barrel removal and installation in either upright or inverted position.
• Note: Will not fit our DCM profile barrels • Will not distort receiver or harm its finish. Also available, a
(RM-001) ........................................................... $11.95 larger version for the Bushmaster 308.
(OM-006) ........................................................... $31.95
(OM-007)(for Bushmaster 308)............................. $37.95

58 Phone orders: 1.800.998.7928


Dewey .50 caliBer
two-piece cleaninG roD
• 54” long, two piece rod perfect for the new Bushmaster BA50
.50 BMG cal. rifle
Bushmaster armorer’s action • 44” of coated rod with 5/16 stainless steel extension
clamp for all ar15/m16-type rifles • Cleans everything from .35 caliber and up. Supplied with 50-J brass
jag and adapter to accept 8/32 brushes.
• Works with all AR-Type rifles — even early A1’s and A3 “flat-
top” uppers with carry handle in place (DEWEY-50C54) .................................................. $42.95
• Used in conjunction with an Armorer’s barrel wrench, this clamp
eliminates barrel vise jaw blocks for removing or replacing barrel
assemblies, and is necessary when installing tubular aluminum
V Match handguards or competition free-floating tubes. Also Dewey ar15/m16
available, a larger Bushmaster .308. Breech roD GuiDe
(Upper receiver is not included) • Guides cleaning rod straight into the barrel from breech end
(OM-003) ........................................................... $41.50 • O-rings seal off the chamber to prevent any back-flow of cleaning
(OM-004)(for Bushmaster 308)............................. $53.95 solvents and debris into the action, trigger and magazine areas
• For barrels 24” and longer, we recommend using a 36” rod
Gunslick® .22/.223 cal. with this rod guide (see Dewey Rod Dewey-22CM-36). Also
cleaninG kit available — Dewey .308 breech rod guide.
(Dewey-1000)..................................................... $23.95
• These quality kits are offered in either .22 caliber
or .30 - .32 caliber versions safety Block for ar15/m16
(62008-223) ..................................................... $15.95 rifles anD others
• Molded plastic with the
Gunslick® .308 Bushmaster name
cal. cleaninG kit • Cone end inserts into the firing
(62014-308) ...................................................... $15.95 chamber, handle protrudes to indicate a
safe firearm condition
(SBBFI) ................................................................ $2.50
Dewey coateD roDs
• Top quality one-piece rods featuring an unbreakable ball bearing
handle and a nylon coating to protect rifling and preserve Dewey cleaninG roD aDaptor
accuracy • A machined brass adaptor threaded (female 8-36 / male 8-32) to
• 8/32 female threaded to accept standard brushes or other accept the military type cleaning brushes – allowing them to be
manufacturer’s accessories used with Dewey and other commercial cleaning rods
• Universal brass patch loop included (DEWEY-22-M-ADPT) ............................................... $3.25
Dewey 22CF-24” (For barrels to 20”) Dewey Delrin
(DEWEY-100) ...................................................... $27.95 cleaninG roD
Dewey 22CF-30” (For barrels to 24”) GuiDes
(DEWEY-200) ...................................................... $27.95 • Maintain the original accuracy of
Dewey 22CF-36” (For barrels longer than 24”)* your rifle by protecting the all
(DEWEY-22CM-36) ............................................... $28.95 important muzzle of the barrel
*8/32 male threaded with an adapter. Use with a breech rod Models for:
guide in barrels 24" or longer. AR15/M16 Post-ban (.700” diam. at muzzle)
(DEWEY-1100)...................................................... $9.95
Dewey .308 cleaninG roD
AR15/M16 Pre-ban (DEWEY-300)............................ $7.95
• A 36” long, one piece, .30 cal. nylon coated rod
with jag and brush adapter (12/28 male thread) M1 Garand (DEWEY-400) ........................................ $7.95
• Thick nylon coating protects the bore from M14 & M1A (DEWEY-500)...................................... $7.95
scratches, and ball bearing handle allows the Mini 14 (DEWEY-600) ............................................ $7.95
rod to spin as it tracks the rifling Mini 30(DEWEY-700) (also fits Bullpup) .................... $7.95
(DEWEY-30C-36) .................................................. $28.95 Ruger 10-22 (DEWEY-800)...................................... $7.95
www.bushmaster.com 59
GunsmithinG accessories
the otis .50 cal. hoppe’s
cleaninG system ystem boresnake —
• Specifically designed for WorlD’s
all your .50 caliber rifles Fastest Gun bore
and pistols, and fits in a cleaner®
handy Cordura zippered pouch • Cleaning system for all .22 caliber centerfire and rimfire rifles
• Includes two .50 caliber Memory-Flex cleaning rods, an 8” (24011)............................................................. $17.90
length for .50 caliber pistols, and a 40” for .50 caliber rifles,
along with a large heavyweight brass obstruction remover and 5.56mm/.223 rem. caliber
a slotted tip bore & chamber brushes
• Weight: 0.735 lbs. / Dimensions: 4” x 4” x 2.5” • High quality tools for barrel cleaning
(250)................................................................. $51.66
• 8-36 threads
otis buttstock stoWaGe Chamber Brush
cleaninG kit (BR-001) .............................................................. $2.00
• A 16-piece cleaning kit for Bore Brush
the AR15/M16 packed (A190) ................................................................. $1.65
in a wedge shaped Cordura
pouch shaped to fit inside
the rifle’s buttstock storage neW .50 bmG cal. cleaninG Gear
compartment — lifetime Bore Brush
guaranteed by Otis Technology (B-50) .................................................................. $1.95
• Includes bore and chamber brushes, Memory-Flex rod, double- Chamber Brush
end brush, slotted patch tip, patches, NATO adapter, bore light, (SB-12) ................................................................ $1.95
chamber rod, T-handle, CLP solvent, and more Chamber Rod
(224-2) .............................................................. $46.95 (EWEY-CHR-50) .................................................... $19.95
otis tactical cleaninG system Chamber Brush Adapter
• 23-part weapons maintenance (DEWEY-SBA) ......................................................... $2.95
system cleans all rifles .177 to kleenbore bore brushes
50 caliber, shotguns .410 to
10 gauge, and pistols .177 • Top quality materials all threaded 8-32 for commercially
to 45 caliber available rods
• Packed into a zippered, 6.8mm /.270 Caliber Bore Brush
round, black nylon soft-pak (4" by 2") (A-179) ................................................................ $1.65
• Includes 5 brass bore brushes, 3 forged brass tips, 3 Memory-Flex 7.62mm /.30 Caliber Bore Brush
rods, T-handle, shotgun adapter, all caliber patches and patch (A-180) ................................................................ $1.65
savers, 1/2 oz. bottle of bore solvent, NATO adaptor for military 9mm /.38 Caliber Bore Brush
brushes and bore reflector/safety flag (A-181) ................................................................ $1.65
(750)................................................................. $47.95 .44 /.45 Caliber Bore Brush
(A-182) ................................................................ $1.65
otis technoloGy
Gun cleaninG cD
neW rem oil 2oz
• All the tips, techniques and informa- bottle
tion needed to keep any rifle, pistol,
shotgun or black powder piece in • Proven superior for cleaning,
perfectly functioning, spotless condition lubricating and corrosion-protecting
— compiled in a handy MiniDisc CD fine firearms
format • Ideal for all outdoor sports and
• A full color printed brochure with marine equipment
highlights from the CD is included; both (10013) ...................................... $1.94
are packaged in a ziplock bag – “The
Industry Guide to the Proper Care and
Cleaning of Firearms”
(2001)................................................................. $5.95

60 Phone orders: 1.800.998.7928


Birchwood casey suPer BlacK
touch-uP Pens
• Touch up nicks and scratches on black anodized aluminum and
polished or matte finished alloy gun receivers, trigger guards,
scopes or black painted surfaces — a fast-drying, lead-free
paint with superior adhesion and durability for gunsmithing uses
Gov’t. issue m16 cleaninG Kit • The felt tip chisel point touch-up pen holds 1/3 fl. oz.
• Kit includes a T-handle, a four-piece rod, swab holder, bore and For Gloss Black Finish
chamber brushes (Gloss-15101) ....................................................... $6.95
• Will fit in the standard buttstock compartment of the AR15, For Flat Black Finish
XM15 or M16 rifle (15102)............................................................... $6.95
• All threading is Military 8-36 threading
(A CLEAN) ........................................................... $10.50 the tetra Gun
cleaninG PacK
A superior firearms maintenance
and preservation system based on a
revolutionary breakthrough in
synthetic polymer technology.

Tetra’s gun cleaning pack contains:


cleaninG Kit case • 1 oz. Tetra Gun lubricant: A synthetic, polymer based lubricant
and conditioner for action and all moving parts
• New gov’t. issue nylon cases with snaps and Velcro closures
• 1 oz. Tetra Gun grease: Synthetic polymer based white grease for
• Great for holding all sorts of small parts and gear use on all metal to metal contact surfaces
• Available in Olive Drab (PO3030D) or Black • 3.75 oz. Tetra Gun spray: Synthetic polymer-based cleaner and light
(PO303B) .....................................................$8.95 each lubricant — removes dirt, combustion residue, old lubricants and
solvents, and offers corrosion protection
Bushmaster cleaninG Kit comBo • 4 oz. Tetra copper solvent: Concentrated copper, lead, powder,
and plastic remover. Removes stubborn fouling from barrels and
• The 7-piece gov’t. issue cleaning kit packed in a nylon cleaning provides fast, effective cleaning without “barrel etching.”
case kit
(5337100802)................................................... $23.50
Cleaning Kit in Black Case
(cleankitB) .......................................................... $16.95
Cleaning Kit in Olive Drab Case
(cleankitOD) ........................................................ $16.95

tetra Gun Grease


1 oz. Tube (5337100005) ..................................... $5.50
tetra Gun oil
1 oz. (5337100006) ........................................... $4.50
4 oz. (5337100303) ........................................... $7.95
8 oz. (5337100304) ......................................... $12.95
the Bushmaster Gun Pad
tetra Gun sPray cleaner
• Sturdy countertop protector for gunsmithing assembly work, and
it doubles as a computer mouse pad 3.75 oz.(5337100201) ....................................... $7.50
• This big (18” x 12”) brightly colored pad has crisp images 8 oz. (5337100202) ......................................... $11.95
of Bushmaster rifles, a protective laminate surface, and soft,
non-skid, foam padded backing
(QP-014) .............................................................. $9.95

www.bushmaster.com 61
GunsmithinG accessories
tetra FieLD Kit
NOTE: Competition Rifle Parts can be fitted to
standard models as well.
• All the necessities to keep your gun functioning on the range
or in the field Bushmaster Dcm 1/4 minute
• Includes: 1 oz. tube Tetra Gun grease and 1 oz. plastic bottle winDaGe comPetition rear
Tetra Gun oil siGht conversion Kit
(TETRAFIELDKIT) ..................................................... $7.95 • Convert your old A2 sight to 1/4 minute of
windage adjustment (MOA) configuration with these
tetra Gunsmith’s Kit high-quality competition parts
• Professional size quantities of high quality Tetra products: Two • Kit includes 1/4 MOA. drum, pin, detent springs and balls
1 oz. tubes of Tetra Gun grease / 8 oz. Tetra Gun oil / 8 oz. (AR 1/4MIN CONVK) ........................................... $21.50
Tetra Gun spray
(TETRAKIT) ......................................................... $31.95
Dcm comPetition Lower
tetra Gun BLue & rust remover receiver assemBLies:
• Removes old bluing and rust All include our factory set DCM two-stage competition trigger
quickly and effectively without
damage to base metal — a
necessity before re-bluing or
browning — 3 fl. oz.
(5337100001) .................................................... $5.50 comPLete Dcm comPetition
Lower assemBLy
tetra Gun LiquiD • Lower receiver with A2 buttstock, competition buttstock weight,
Gun BLue pistol grip and two-stage trigger (as shown)
• A great product for touch-up or complete re-bluing of firearms (A LOW STD W/CGWT) M.S.R.P. .......................... $430.00
(not for aluminum — steel only)
Dcm Lower assemBLy
(5337100002) .................................................... $5.50
• Same assembly as above less buttstock weight
(A LOW STD W/CG) M.S.R.P. .............................. $410.00

tetra Gun coPPer


soLvent Dcm Lower receiver
(5337100501) ................................. $8.50 assemBLy minus ButtstocK
• Includes pistol grip, DCM two-stage trigger and all internal parts
(as shown above)
cLeaninG Patches (ALOW W/OSTK W/CG) M.S.R.P.......................... $360.00
• Bag of 100
• Sized for the AR15/M16 rifle bore
(923) .................................................................. $5.50
FirePower FP-10 “cLP” a2 ButtstocK BaLance weiGht
tyPe LuBricant • Fits snugly in the standard A2 buttstock compartment without
• A cleaner, lubricant, and preservative for rattle — a 3.62 lb. chunk of lead that can be trimmed to help
weapons & weapons systems, Firepower achieve a perfectly balanced rifle
FP-10 is a semi-synthetic CLP specifically • Its wedge shape and rubber pressure pad ensure a tight,
formulated for the serious shooter, soldier, rattle-free fit
law enforcement officer, sportsman (Part # 9349119SW) ......................................... $21.50
and professional armorer
1 oz. Bottle (FP-10-1) ........................................... $4.25 comPetition hanDGuarD
4 oz. Bottle (FP-10-4) ........................................... $6.50 BaLance weiGht
16 oz. Bottle (FP-10-16) ..................................... $14.95 • This lead balancing weight fits inside the bottom half of the
standard A2 handguard to add fore-end weight to your competi-
tion rifle (a companion to the buttstock weight below)
• Weighs approx. 3.5 lbs. and can be cut down to achieve perfect
balance
(GPSS-HBW) ....................................................... $31.95

62 Phone orders: 1.800.998.7928


comPetition riFLe Parts
Bushmaster two staGe Ge
comPetition triGGer
shown plus
• Includes all the specially modified parts shown plus
1st Stage and a 1 lb.
•  Can be set for a 3 1/2 lb. DCM legal 1st Stage and a 1 lb.  Bushmaster Dcm comPetition
lowers
(2nd Stage) letoff. NOTE: This trigger will not fit in Colt lowers  uPPer receiver/BarreL assemBLy
with a “block” over the safety, and is not designed to work with  •  For the serious high power competitor — this upper Assembly 
large Colt pivot pins includes all the competition modifications needed to win
(8448592-SCGK) .............................................. $127.95 •  Redesigned “Stay-Straight” dual detent rear sight with competi-
Also available: Two-stage Competition Trigger with   tion hood
Bushmaster Ambidextrous Safety •  Assembly includes the matching bolt and bolt carrier
(8448592-SCGKA)  ............................................ $148.95 (PURA2B 20CG8XR)  .......................................... $790.00
moLy-sLiDe™
LuBricatinG Paste
Bushmaster Dcm comPetition
•  A 60% molybdenum disulfide (MoS2) lubricating  heavy BarreL with Factory
paste for wear resistance, anti-seizing and anti-galling  matcheD BoLt anD Front
on cams, bushings and other sliding surfaces siGht Base
•  Has a very wide working temperature range with minimal  •  A lapped 20” barrel — button rifled in 1 x 8 right hand twist 
evaporative loss — features an 11° crowned muzzle designed for competition 
•  The 1 oz. jar will usually last the average shooter/gunsmith  and a custom match hybrid chambering with longer throat, or 
for years “leade,” to accommodate 5.56mm ammunition
(MS-100)  ............................................................ $8.50  •  Chrome moly-vanadium steel (non chrome-lined) with a 
Dcm comPetition manganese phosphate finish
a2 uPPer receiver •   Diameter from the barrel extension forward to the sight base 
assemBLy with step is a full 1”. NOTE: Requires assembly by an experienced 
gunsmith to achieve optimal accuracy.
“stay straiGht” a2 comPetition
rear siGht
(9349054-20CGA)  ........................................... $313.95
With std. muzzle threading for flash suppressors
•  Includes forward assist, ejection port cover and one  
competition sight micro-aperture in your choice of four “peep”  (9349054-20CGAPRB) ....................................... $313.95
sizes — please specify size Note:  Assembly by a gunsmith recommended for optimum accuracy.
DCM Upper Receiver Assembly with 1/2 Minute Rear Sight 
(A2URCG2XR) ................................................... $223.95
DCM Upper Receiver Assembly with 1/4 Minute Rear Sight Bushmaster Dcm “Free-FLoater”
A2URCG4XR)  .................................................... $223.95 Kit — a BarreL nut/Free-FLoater
tuBe/hanDGuarD comBination
Bushmaster comPetition “stay
straiGht” a2 rear siGht assemBLy •  This fore-end system meets all regulations for DCM  
competition and free floats the barrel from barrel nut forward 
•  Highly accurate rear sight assemblies with the new “Stay- for optimum accuracy
Straight” dual detent mechanism (keeps the sight from moving 
or canting) for the serious competition shooter •  A sling swivel loop is mounted onto the front of the tube — 
handguards, delta ring, weld spring, snap ring and a special gas 
•  Elevation and windage mechanisms are available in either 1/2  tube are included
or 1/4 minute of adjustment
(9349059CGA)  ................................................ $159.95
•  The flip-up is machined to allow installation of different 
interchangeable micro-apertures (one aperture included with 
each complete sight or flip-up assembly) 
•  These precision machined inserts are available in 4 aperture sizes:  Dcm Free-FLoater tuBe/
.036”; .040” Standard (9 out of 10 shooters find the .040” stan- custom Gas tuBe set
dard aperture works best, your eyes may differ); .046”; or .052” •  Add your own rifle length handguards to this competition free-
1/2 MOA Rear Sight with choice of  float tube — includes a custom bent gas tube
aperture size •  Minor modifications to handguards are required for fitting
(9349072CGA2XR)  ............ $122.50 •  Upper receiver disassembly and front sight removal are neces-
1/4 MOA Rear Sight with choice of  sary for assembly onto rifle
aperture size • As installed on DCM rifle
(9349072CGA4XR)  ............ $122.50 (2698823) ....................................................... $132.95
www.bushmaster.com 63
COMPETITION RIFLE PARTS
ExTRA COMPETITION
SIghT APERTuRES*
BuShMASTERMASTER COMPETITION SIghT •  These thread directly into the flip-up in your competition sight
SERvICE TOOL •  Your vision determines which micro-aperture suits you best (most 
shooters prefer the .040” standard aperture)
•  A combination front sight adjustment tool and rear shroud insert 
“screwdriver” machined of steel with black finish and knurled   Choose from: 
for a non-slip grip .036” (CGI36) / .040” Std. (CGI40) / .046” (CGI46) / 
• Length: 2” .052” (CGI52)  ...........................................$10.95 ea.
(CG-MPT)  ........................................................... $10.95  *Any three apertures can be purchased as a set ......... $25.95

“ThE hOOd KIT” A2 COMPETITION “FLIP” SIghT


•  Includes our competition flip-up,   • Shipped with one micro-aperture
the hood sight shroud and your   Choose from these 4 Aperture sizes:
choice of one competition aperture;  
aperture; .036” (CGF36) / .040” (CGF40) /  
numbers below indicate the size of the aperture opening 
.046” (CGF46) / .052” (CGF52) ......................... $26.50
C  hoose from: 
.036” (CGF36HK) / .040” (CGF40HK) / 
.046” (CGF46HK) / .052” (CGF52HK) ................. $40.50 SAFETy BLOCK FOR AR15/M16
RIFLES ANd OThERS
“ThE hOOd” •  A plastic safety block with Bushmaster  
name molded in — the cone end is inserted  
inserted
•  A competition rear sight shroud (center in photo above), this  into firing chamber, and the “handle” end protrudes to show 
tubular, threaded insert for our competition flip-up eliminates all  safe condition of rifle
glare and improves your sight picture
•  Bushmaster includes this safety block with every complete 
•  Internally threaded to accept the micro-aperture of your choice rifle sold
(9349075CGH)  .................................................. $15.95
• 4-piece set
(SBBFI)  ............................................................... $2.50

ShORT
COMPETITION hOOd
•  This variation on the competition rear sight shroud above was created 
to allow shooters who wear glasses to get as close as possible to the 
rear sight without scratching their glasses ChAMBER ChECKER SAFETy FLAg
(9349075CGH-S)  ............................................... $15.95 •  Tough yellow plastic flag slips into the chamber
•  Close the bolt, and it clearly shows your rifle’s range-safe status
(CC Chamber Check)  .............................................. $2.50

64 Phone orders: 1.800.998.7928


SINgLE-ShOT MAgAzINE FOLLOwER CREEdMOOR
•  A blue plastic follower that installs easily inside  dELuxE CART
most AR-Type .223/5.56mm magazines CONvERSION kIT
•  Allows single shot loading of extra long   •  A quality kit that attaches to the 
competition handloads that won’t function   Creedmoor deluxe shooting stool (below, 
in regular magazines left) to add easy rolling portability and a 
compact size when folded down
• Magazine not included
•   Machined from 3/8” bar stock 
(SS-FOL) ............................................................. $13.95 
aluminum and the finest heavy duty 
hardware and wheels
SINCLAIR INTERNATIONAL SIghT
•  Folds down in seconds for car trunk  
ANd MuzzLE COvER SET
stowage, or disassembles easily to fit  
•  Often seen on the DCM ready   in a standard suitcase as the longest piece is only 23”
line, these popular protective   (BFI-Cartcon)  .................................................... $124.95 
covers are molded from durable  
bright yellow vinyl to protect “sight zero”
“sight
• To keep dirt out of the muzzle and to offer  
high visibility CREEdMOOR ShOOTINg
EquIPMENT RAIN COvER
•  Set includes front and rear sight covers and two sizes of muzzle 
guard covers — one for rifles with flash suppressors and another  •  This cover was designed so the competitor can saddle his rifle 
for rifles with plain competition crowned muzzles and gear on the shooting stool (below, left) for protection 
(14-200)  ........................................................... $14.95 against the nastiest weather or potential tampering
•  Black nylon pack cloth, it can be secured with its own strap 
TuRNER around a shooting stool 
SAddLERy • Weight: 2 lbs.
LEAThER (BFI-N045)  ........................................................ $29.95
COMPETITION
SLINg ShOOTINg STOOL ShOuLdER
•  National match police tactical rifle sling is premium quality, black, 11  STRAP
oz. strap leather — 54” in length with numbered holes •  A convenient, 1.5” wide black polypropylene webbing shoulder  
• Mil. spec. Parkerized steel hardware and copper rivets carrying strap for the Creedmoor shooting stool
• Keepers are 7/8” wide and hand stitched • Weight: 1 lb.
(TS-NMPTRS)  ...................................................... $52.95 (BFI-N026)  .......................................................... $5.95

CREEdMOOR RIFLE dATA SCORE BOOk


CREEdMOOR dELuxE SERvICE RIFLE
ShOOTINg STOOL •  Essential data is arranged in a simple check off format with 
enlarged target overlays (double overlays for 200 and 300 yard 
•  Custom sewn by Creedmoor for Bushmaster of red Cordura with  rapid fire stages) 
black webbing and the Bushmaster snake logo
•  Ample pages for 200/300/600 and 1000 yard shooting — 
•  Carry all your “necessaries” in the handy hanging compartmen- in a convenient 8.5” x 5.5” spiral bound format
talized bag  — accessible through half moon YKK zippered 
(BFI-N075)  .......................................................... $8.95 
openings on both sides
•  Carry up to four AR-15 magazines in the outside pouches  — 
protected from dirt and rain with a Velcro flap
•  A zippered pocket above the magazine pouch accommodates your 
score book, and large outside pockets on three other sides offer 
huge storage capacity
•  Carrying bag is 12.5” tall x 11” wide x 12.5” deep, and 
overall weight is only 6 lbs.
(BFI-N051)  ........................................................ $69.95 

www.bushmaster.com 65
COMPETITION RIFLE PARTS
CREEdMOOR A1 REAR SIghT ASSEMBLy
BuShMASTER ROLL-uP
(A1 RSITE ASSY)  ....................... $12.95
ShOOTINg MAT
•  The original M16A1 configuration — adjust-
•   A popular — and necessary — part of 
able with A1 sight tool or bullet tip
high power competition gear, is this roll-
up shooting mat done in Bushmaster  A1 Sight Aperture 
colors by Creedmoor Sports (8448539)  .......................................................... $6.50
•  Features a waterproof vinyl bottom in  A1 Windage Screw 
Bushmaster black, and Cordura nylon  (8448534)  .......................................................... $3.15
top in Bushmaster red with our snake logo embroidered on for  A1 Windage Drum 
maximum visibility  (8448535)  .......................................................... $3.15
• Oversize textured rubber elbow pads Rear Sight Flat Blade Spring
•  Mat rolls up for convenient storage and carry (8448536)  .......................................................... $ .55
•  Dimensions are 29.5” wide x 68” long, and weight is approx.  A1 Windage Drum Detente 
8 lbs. (8448537)  .......................................................... $ .55
(BFI-N040)  ........................................................ $79.95 A1 Windage Drum Roll Pin 
(MS16562-96)  .................................................... $ .55
CREEdMOOR BuShMASTER
A1 Drum Detente Spring
hARd BACk hEAvy CORduRA (8448538)  .......................................................... $ .55
ShOOTINg COAT
•  Creedmoor Sports’ most popular shooting jacket, sewn in Bushmas-
AdjuSTMENT kNOB FOR
ter’s red & black colors of heavy Cordura material — ideal for high 
power or smallbore competition shooting A1 REAR SIghT
•  A stiff interior center back panel of heavy cotton canvas gives it  •  Knob converts the A1 rear sight to the latest M16A1E1 
the “hard-back” name and provides maximum back support for  configuration
the standing position •  Phosphate finished steel knob is knurled for quick adjustment 
•  Custom sewn to fit the individual shooter (male or female) and  (no sight tool needed) and more precise half-click calibration 
is available in sizes 34 thru 48 — for the right- or left-handed  (LMT-001K)  .......................................................... $9.95 
competitor
•  To achieve an exact fit, Bushmaster sales 
Bushmaster sales COMPLETE A1 REAR SIghT
people will refer you to Creedmoor’s 
Creedmoor’s ASSEMBLy wITh OuR A1
expert tailoring staff who will guide 
guide AdjuSTMENT kNOB
you through the fitting process 
process
•  Includes knob, A1 sight aperture, A1 windage screw, flat spring,  
tapered
•  Choose from standard or tapered  ball, spring and roll pin
cut, and you’ll have to provide 
(A1-RSIGHT-KIT)  .................................................. $14.95
exact measurements around 
your chest (under armpits) and 
around stomach (widest point)  COMPLETE REAR
•  Specific alterations to achieve  SIghT ASSEMBLIES
length
perfect sleeve and body length  • Latest M16A2 design with dual apertures with knob adjustment 
Creedmoor
should be discussed with Creedmoor for elevation and windage. Dial in targets out to 800 meters in 
$310.95 ....................................................(BFI-N002) 
(BFI-N002) 100-meter increments. Manganese phosphate finish steel.
For extra large sizes (50 - 52 - 54) Add $20.00 A2-RSIGHT-KIT
(AR A2 RSA)  ....................................................... $53.50
A3 Rear Sight Assembly
A1 ROuNd FRONT SIghT POST
(AR A3 RSA)  ....................................................... $53.50
• Original M16A1 round post 1/2 MOA rear sight assembly for the A3 removable carry handle
(8448572) ........................................................... $3.95 (adjusts out to 600 meters) 

66 Phone orders: 1.800.998.7928


SIGHTS/SCOPES/MOUNTS
WILLIAMS FIRE SIGHT FOR AR15/M16 TRIjICON LUMINOUS
•  This front sight design incorpo- TRITIUM FRONT
rates a light gathering element  SIGHT POST
(the tubular piece that mounts 
along front edge of the AR sight  •  AR-Type front sight post is functionally identical to the standard 
base) for low light situations  front sight post and fits either A1 or A2 models and includes 
sight tool
•  The assembly is elevation 
adjustable, and all sight pieces   •  Illumination from the tritium inserts are guaranteed for 
are CNC machined of black finished aluminum 10 years by Trijicon 
•  No drilling or tapping is required for installation on your front  (CP-25F)  ............................................................ $57.95
sight base
(9349054FSB-WFS)  ........................................... $42.50 TRIjICON REAR SIGHT APERTURE
• An effective ghost ring style flip-up aperture for the AR
Front Sight Replacement/Repair Parts • Houses two tritium inserts in the larger aperture
Front Sight Detent  (CP-25R)  ........................................................... $38.00
(8448573)  .......................................................... $1.50
Front Sight Detent Spring TRIjICON TRITIUM SIGHT SET
(8448574)  ...........................................................$ .85
•  Both front and rear sights (as shown above), plus  
Front Sight Taper Pin
front sight detent and A1/A2 sight adjustment tool
(9349054BTP) ..................................................... $1.00
(CP-25)  ............................................................. $89.95
Rear Sight Replacement/Repair Parts
Rear Sight Elevation Index
(9349066)  .......................................................... $7.50
Rear Sight Elevation Index Screw
 (9349065)  ......................................................... $1.00
Rear Sight Elevation Knob TRIjICON TA51 MOUNT FOR ACOG
(9349067)  .......................................................... $6.50 •  Knurled thumbnuts allow quick installation/removal on mil. spec.
Rear Sight Elevation Spring • Picatinny rail flat-tops
 (9349070)  ......................................................... $2.25
•  The ACOG scope mounts into this with two screws — use 
Rear Sight Elevation Spring Pin Loctite to keep it from “shooting loose”
(MS16562-121) ...................................................$ .55 (TA51)  ............................................................... $84.95
Rear Sight Helical Spring
(9349069)  ............................................. [3 req’d] $ .55 KNS PRECISION FRONT SIGHTS
Rear Sight Ball Bearing •  Quality replacement front sights for the AR15/M16 offering 
(MS19060-4808)  ................................... [3 req’d] $ .55 .010 diam. crosshair wires for a precise sight picture and 
hooding for reduced glare
Rear Sight Windage Knob
(9349077)  .......................................................... $6.50 •  Tactical Model dual range sight (below) offers an adjustable elevation 
dot for close range targets below the long range crosshairs
Rear Sight Windage Screw
(9349076)  .......................................................... $4.50 A. Standard Model
(KNS1)  .............................................................. $37.95
Rear Sight Windage Knob Pin
(MS16562-98)  .................................................... $ .55 B. Wide Hood Model
(KNS2)  .............................................................. $37.95
Rear Sight Flat Blade Spring
(8448536)  ........................................................... $ .55 C. Tactical Model
(KNS3)  ...............................................................
............................................................. $52.95
Rear Sight Flip-up Aperture
(9349075)  .......................................................... $8.50
A B C
Rear Sight Base
(9349074)  ........................................................ $23.50

www.bushmaster.com 67
SIGHTS/SCOPES/MOUNTS
A2 SqUArE FrONT SIGHT POST
•  Standard M16A2 steel square post design
(9349056) ........................................................... $5.50
A.r.M.S.
.M.S. #22M68
CANTIlEvEr ExTENSION
A2 FrONT SIGHT POST
FOr FlAT-TOP COlTS •  Designed to align the Aimpoint® CompM3 sight with the 3XMag 
module when used with the A.R.M.S. #22M68 ring mount 
•  Colt A3 removable carry handle   (below, left). Low std. height allows perfect red dot co-witnessing 
sights are taller than A1& A2   on M16/M4 models
rear sights, and require an  
.040” taller front sight post  • Machined steel with gray phosphate finish
(1137)  .............................................................. $35.00
•  Also for use with swan sleeves  
& A.R.M.S. #40 sight
(9349056-M)  ...................................................... $5.50

AlUMINUM
UMINUM SCOPE MOUNT AIMPOINT
IMPOINT® COMPM3 SIGHT
•  Anodized, machined aluminum, “see-through” Picatinny rail mount  The Aimpoint® Comp3 Passive red dot collimator reflex sight offers 
(Weaver also) which allows use of existing iron sights capabilities not found in other sighting systems 
• Attaches to the carry handle with a thumbnut Features include: 
(RAY-002)  .......................................................... $21.95 •  Compatibility with every generation of NVD 
•  ACET technology allowing 50,000 hours of operation on one 
single battery (on setting 7 of 10; Battery Type: 3 volt lithium 
battery included,  type 2L76 or L1/3N) 
• 500,000 hours of use on NVD setting
• Magnification 1X; Reticle Size: 2 MOA 
• Unequalled light transmission 
• Submersible to 45 meters (135 feet)
A.r.M.S. #22M68 rING MOUNT •  Replaceable outer black rubber cover offering protection and an 
FOr AIMPOINT® COMPM3 additional stealth factor 
•  A rugged A.R.M.S. mount designed with a wide clamping cradle  •  Rugged, durable construction unaffected by extreme  
for the CompM3 weather conditions 
•  It features a single A.R.M.S. quick throw lever locking system  • Unlimited field of view, unlimited eye relief, parallax-free 
to guarantee repeat zero on any Picatinny rail — solid, quick,  • No laser emissions that could be harmful to your eyes 
easy to mount or remove
• Mechanical switch for speed and reliability
•  The “no-mar”pad built into the throw lever protects the Picatinny 
rail’s edges and the mount’s two pieces can be separated  • Increased aiming confidence 
for use with the cantilever spacer (above right) to match the  • Reduced training time and ammunition 
CompM3 with the 3XMag module (opposite page) •  Switch-dot brightness: 10 settings — 4 NVD, 6 daylight 
(10950)  .......................................................... $138.00 •  Body: Extruded, high strength aluminum, hard anodized with 
dark graphite gray non-glare finish 
•  Lens covers of black, non-glare thermoplastic elastomer 
•  Adjustments: 1 click = 10 mm at 80 meters = 13 mm at 100 
meters = 1⁄2” at 100 yds 
•  Length: 130 mm (5.1” );  Width/Height: 55 mm x 55 mm 
(2.2” x 2.2”); Weight – includes lens covers and  
protective rubber shroud: 270 grams (9.5 oz.)
(11408)  .......................................................... $556.00

68 Phone orders: 1.800.998.7928


AIMPOINT® SRP-M QUICk DETACH SPACER fOR AIMPOINT IMPOINT®
MOUNT fOR COMP M3 SIGHT TwISTMOUNT
• A solid, simple 30mm wide-ring high • A companion piece to the
mount with a large knurled thumbnut TwistMount designed for
for easy on/easy off attachment to “co-witnessing” between 3X magnifier and CompM3 on same
any MIL-STD 1913 Picatinny rail plane rails
• Optical center over the top of the • It raises the 3XMag in the TwistMount to match the height of
Picatinny rail is 26.1mm (+/- 0.1 the CompM3
mm) — may require a riser block for (10566) ............................................................ $11.00
sighting over a standard AR front sight
(10830) ............................................................ $29.00 lEUPOlD® MARk 4® 4.5-14 X 50MM
lR/T (lONG RANGE/TACTICAl) ANGE/TACTICA /T
/TACTICA l)
M1 SCOPE
AIMPOINT® 3XMAG
MAGNIfyING MODUlE • Leupold® Mark 4® long range/
tactical riflescopes are some of
• Compatible with the CompM3 Sight for maximum the most dependable, highest
flexibility in the field performing riflescopes you’ll
• When combined with Aimpoint’s patented TwistMount the find anywhere
3XMag offers the ability to jump from CQB (Close Quarters • The Leupold® Index Matched Lens System® delivers
Battle) to semi-sniping and vice versa unsurpassed sharpness across the visual field, brightness, and
• Hunters can rapidly switch from non-magnifying to magnifying contrast for excellent target definition, even in low light
while still being able to keep their Aimpoint® sight on the • Side focus parallax adjustment offers fast, easy parallax focusing
firearm from 75 yards to infinity — from any shooting position
• The versatile 3XMag can also be used as a handheld magnifying • Finger-adjustable 1/4 MOA windage and elevation adjustments are
monocular for discrete observation and identification clearly defined with audible, tactile clicks
• Once sighted in, adjustment knobs can be zeroed
• The Leupold® Mark 4® LR/T® is available with either the mil
dot or Duplex® reticle
• The mil dot reticle provides accuracy of range estimation for
Unique features include: hunters and target shooters
• Mounts on rail system behind Aimpoint® sights with Aimpoint® • 30mm maintube offers incredible strength and allows for the greater
TwistMount or a regular 30mm ring range of windage and elevation adjustment
• Provides extended range to the operator • Flip-open lens covers are standard issue with each Mark 4® LR/T
• No influence on point of impact, no need for re-zeroing the sight • Weight: 22 oz.; Overall length: 12.5”; FOV @ 100 yds.: 19’
• Eye relief at 5° FOV 40–90 mm; at full FOV 60–65 mm LEUPOLD® Mark 4® 4.5-14 X 50mm LR/T
M1 Scope w. Duplex Reticle
• Length: 110 mm (4.3”); Width/Height: 44x41 mm (1.7” x
(54660) ....................................................... $1,219.99
1.6”); Weight: 200 g (7.1 oz.)
LEUPOLD® Mark 4® 4.5-14 X 50mm LR/T M1
• Body’s bottom surface has 4 screw holes for other mounting
Scope w. Mil Dot Reticle
alternatives
(54560) ....................................................... $1,374.99
• Body: Anodized aluminum, dark gray, rubber covered
(11324) .......................................................... $535.00
lEUPOlD® MARk 4®
STEEl SCOPE RINGS
AIMPOINT® TwISTMOUNT • Rugged, solid steel construction,
fOR 3X MAGNIfER and highly recoil resistant
• The recommended mount for the • Mount easily onto any Picatinny rail
3XMag is this Aimpoint® TwistMount — • Sold per pair
allows for quick attachment and
Leupold® Mark 4® 30mm Scope Rings — Medium Height
detachment
(61049) .......................................................... $185.00
• Fits any MIL-STD 1913 Picatinny rail
Leupold® Mark 4® 30mm Scope Rings — High Height
(11355) .......................................................... $164.00
(60699) .......................................................... $185.00

www.bushmaster.com 69
SIGHTS/SCOPES/MOUNTS
LEUPOLD® Mark MODEL xPS2-BLk
4® FIxED 16 POwEr •  Single transverse CR123 battery to reduce 
SCOPE 16 x 40MM Lr/T (LONG raNGE/ sight length
TaCTICaL) M1 rIFLESCOPE wITH MIL •  Shortened base only requires 2.75”  
DOT rETICLE of rail space
• Incredibly rugged, absolutely waterproof •  Rail space is gained by hovering the battery compartment over 
delta ring of rifle
•  The Multicoat 4® lens system delivers extreme clarity from edge 
to edge of the visual field, outstanding contrast, and a bright  •  Average battery life at brightness level 12 is roughly 600 hours
sight picture even in extreme low-light conditions •  20 brightness settings to accommodate low to bright situations
•  Side focus parallax adjustment for fast, easy   •  Submersible to 10 ft. depth
parallax focusing from 50 yards to infinity, from   •  Black anodized finish
any shooting position
•  Better sealing is achieved via a threaded battery cap and o-ring 
•  Finger-adjustable ¼ MOA windage and elevation adjustments  design
with audible, tactile clicks
•  Rugged aluminum hood designed to protect optics from damage
• Once sighted in adjustment knobs can be zeroed (EOT-XPS2)  ...................................................... $519.00
•  Available with the mil dot reticle to provide accuracy of range 
estimation for hunters and target shooters
•  The 30mm maintube offers incredible strength and allows  MODEL xPS2-aTaCS
for the greater range of windage and elevation adjustment  •  Single transverse CR123 battery to 
(140 MOA of elevation adjustment and 45 MOA of windage  reduce sight length
adjustment) •  Shortened base only requires 2.75”  
•  Flip-open lens covers are standard issue with each Mark 4®  of rail space
LR/T riflescope •  Rail space is gained by hovering the battery compartment over 
•  Rugged and absolutely waterproof, these LR/T riflescopes  delta ring of rifle
helped to set the Leupold® Mark 4® standards and can  •  Average battery life at brightness level 12 is roughly 600 hours.
withstand incredible abuse •  20 brightness settings to accommodate low to bright situations
•  Weight: 22.5 oz.; Overall length: 13.1”; FOV @ 100 yds.:   •  Submersible to 10 ft. depth
6.8’. Finished in matte black
(50541)  ....................................................... $1,874.99 •  A-TACS® (Advanced Tactical Concealment System) pattern
•  Better sealing is achieved via a threaded battery cap  
and o-ring design
MODEL G23 •  Rugged aluminum hood designed to protect optics from damage
•  Fixed 3X magnification (EOT-XPS2-ATAC)  ............................................... $549.00
•  FTS (flip-to-side) mount offers shooter 
instant transition from 3X to 1X situation
•  Mount consists of an A.R.M.S.® quick release throw lever to 
MODEL 512
rapidly remove/attach system to rail
• Powered by (2) AA alkaline/lithium/
•  Designed to work with all EOTech HWS models. Product includes 
rechargeable batteries  
a 7mm spacer to include for all side button or throw lever HWS 
products • Tool-less mounting via hex bolt or 
thumb screw  
•  Ambidextrous mount accommodates both left- and right-handed 
shooters • Adaptable to either 1” Weaver or MIL-STD 1913 rails
•  Optic includes internal adjustments to properly center the HWS  • Average battery life at brightness level 12 is roughly 600 hours 
reticle in the 3X sight picture with alkaline and 1,000 with lithium
•  Rubber overmold protects optic from damage • 20 brightness settings to accommodate low to bright situations
(EOT-G23)  ........................................................ $589.00 • Submersible to 10 ft. depth
• Black anodized finish
• Rugged aluminum hood designed to protect optics from damage
(EOT-512)  ........................................................ $439.00

70 Phone orders: 1.800.998.7928


MODEL EXPS3-BLK TrIjICON® rEfLEX
• Single transverse CR123 battery to rX30-23 — 6.5 MOA
reduce sight length AMBEr DOT AND
42MM OBjECTIvE
• Includes an adjustable quick release
throw lever for easy removal/ Trijicon’s technologically advanced reflex sights offer shooters the
attachment that is designed to accom- perfect combination of speed and precision under virtually any
modate all rail tolerances lighting conditions. The Trijicon advantage includes:
• Left side button position allows NV or magnification to be mounted • A bright aiming point in low light, no light or bright light
directly behind HWS • Quick target acquisition and pinpoint accuracy
• Average battery life at brightness level 12 is roughly 600 hours • Big sight picture and realistic color
• 20 brightness settings to accommodate low to bright situations; 10 • Built to be tough
additional night vision compatible settings • Designed for “both-eyes-open” shooting
• Submersible to 33 ft. depth (RX30-23) ....................................................... $638.00
• Black anodized finish
• Shortened base only requires 2.75” of rail space.
• Better sealing is achieved via a threaded battery cap TrIjICON® rMr™ DUAL
and o-ring design ILLUMINATED SIGHT —
7.0 MOA AMBEr DOT w/
• Rail space is gained by hovering the battery compartment over
rM34 PICATINNy
delta ring of rifle
rAIL MOUNT
• 7mm raised base providing iron sight access in the lower
Developed to improve precision and accuracy with any style or cali-
1/3 of window
ber of weapon, the Trijicon® RMR™ (Ruggedized Miniature Reflex)
• Rugged aluminum hood designed to protect optics from damage is designed to be as durable as the legendary ACOG®. The RM04-
(EOT-EXPS3) ..................................................... $639.00 34 is a battery-free sight, featuring Trijicon® fiber optics and tritium.
Housed in rugged forged aluminum, the RMR™ is extremely tough
yet lightweight. New easy-to-use adjusters with audible clicks allow
for quick windage and elevation adjustments. The new Trijicon®
MODEL EXPS3 ATAC RMR™ is tougher than any alternative and suitable for military, law
• Single transverse CR123 battery to enforcement and hunting applications.
reduce sight length (RMO4-34) ...................................................... $572.00
• Includes an adjustable quick release
throw lever for easy removal/attachment that is designed to
accommodate all rail tolerances 3X30 TrIjICON®
• Left side button position allows NV or magnification to be mounted ACOG® wITH
directly behind HWS AMBEr CHEvrON
• Average battery life at brightness level 12 is roughly 600 hours rETICLE
• 20 brightness settings to accommodate low to bright situations; 10 The new 3x30mm model is designed for law enforcement and
additional night vision compatible settings military applications where the combination of ample magnification,
low light capability and long eye relief make the TA33 the Trijicon®
• Submersible to 33 ft. depth
ACOG® of choice. The TA33-8 3x30 ACOG® Scope features Dual
• A-TACS (Advanced Tactical Concealment System) pattern Illumination amber Chevron .223 ballistic reticle.
• 7mm raised base providing iron sight access in the lower (TA33-8) ....................................................... $1,173.00
1/3 of window
• Rail space is gained by hovering the battery compartment over
delta ring of rifle
• Better sealing is achieved via a threaded battery cap and o-ring design
• Shortened base only requires 2.75” of rail space
• Rugged aluminum hood designed to protect optics from damage
(EOT-EXPS3-ATAC) ............................................. $669.00

www.bushmaster.com 71
SIGHTS/SCOPES/MOUNTS
4x32 TrIjICON®
ACOG® ArMy rIfLE
COMbAT OPTIC
(rCO) wITH rED TrIjICON ICON® ACCUPOINT® — 5-20x50
DUAL ILLUMINATED VArIAbLE IAbLE POwEr, M MIL-DOT
rETICLE CrOSSHAIr
OSSHAI wITH AMbEr DOT
No tools are needed for windage and elevation adjustments  Trijicon’s longest-range scope ever, it gives tactical shooters, varmint 
because the RCO-M150CP features external windage and elevation  hunters and law enforcement snipers the ability to accurately extend their 
adjusters, making it waterproof up to 11m without caps.  range in any light.
(TA31RC0-M15OCP)  ....................................... $1,581.00 • Advanced fiber-optics and tritium aiming-point illumination speeds target 
acquisition and extends available shooting hours
• Dual-illumination system automatically adjusts aiming-point brightness 
SIMMONS to existing lighting conditions
AETEC® • Manual brightness override allows shooters to easily adjust the reticle to 
MASTEr suit their preferences
SErIES™ 2.8–10 x 44MM SCOPE • 30mm tube offers a greater range of mounting options
•  Simmons’ new Master Series™ AETEC® is one of the most  • Rugged, aircraft-quality, hard-anodized aluminum body offers all- 
innovative, high performance scopes ever designed  weather protection
•  Featuring Simmons’ patented TrueZero™ flex erector system  • Unmatched long eye relief protects against the recoil of higher caliber 
and new windage and elevation dials, the new AETEC® delivers  rifles
remarkably consistent shot placement and precise MOA adjust-
ments throughout the entire range • Easy-to-use external turret controls for windage and elevation 
adjustment
•  Add Simmons’ new QTA™ (Quick Target Acquisition) eyepiece, 
which delivers a constant minimum 3.5 inches of eye relief and  • Side parallax adjuster for enhanced accuracy at long range
one of the most generous eye boxes in the industry, and you’ll  (TR23-2)  ....................................................... $1,224.00
have the confidence to know that your AETEC® will get the job 
done from shot to shot and season to season
•  The aspherical lens system found on this quality scope was first used 
on expensive binoculars and cameras MEPrOLIGHT® M-21
• True one-piece tube construction is utilized DAy/NIGHT
•  It is waterproof, fog proof and weatherproof, has SureGrip™  ILLUMINATED rEfLEx SIGHT
rubber coated adjusting knobs, and HydroShield™ water and  •  The right solution for military, police and sportsmen when 
condensation resistant lens coatings  rugged construction and reliability count
Innovations to the Simmons AETEC® scope include: •  The Mepro 21 is a maintenance free, dual illuminated, red dot 
•  Simmons’ exclusive true one-piece tube construction for  reflex sight especially designed for quick and instinctive accurate 
increased mounting area shooting — perfect while on the move in close quarters where 
•  Aspherical lens technology and fully multi-coated optics for the  the use of both eyes is critical
brightest, sharpest image in its class •  The Mepro 21 provides instant, all light aiming without batteries 
•  HydroShield™ lens coating helps maintain a clear sight picture  •  Illumination for the aiming point comes from a fiber optic col-
— regardless of weather conditions lector in daylight situations and from a miniature, self-powered 
•  New SureGrip™ rubber surfaces on all eyepieces and side-focus  tritium light source at night
parallax adjustments make the AETEC® one of the easiest scopes  •  Mounting on your weapon is easy with dual quick release levers 
to adjust in the field offering solid attachment onto any Picatinny rail
(2101)  ............................................................ $189.95 •  Weight: 13.23 oz.; Length: 4.53”; Width: 1.65”; Height: 
2.13”
•  Available in two different reticle patterns
MeproLight® M-21 Day/Night Illuminated Reflex Sight with 
Bulls Eye Reticle
(ML96630) ...................................................... $580.00
MeproLight® M-21 Day/Night Illuminated Reflex Sight with 
Open X Reticle
(ML96730) ...................................................... $580.00

72 Phone orders: 1.800.998.7928


LEaTHErwOOd M-1200
6-24X50MM CaMPUTEr arT
rIfLESCOPE fOr .308–.50 BMG
aLUMINUM SCOPE rING SETS • For ranges from 300 to 1200 meters (200m range setting
also provided)
• Top quality, matte black finished ring sets to fit any Picatinny rail.
U.S.A. made – heat treated aluminum with 8-32 socket head • 50mm adjustable objective — “no math” mil dot reticle —
screws in 1” low, medium or high profile horizontally split design air-to-glass surfaces are fully multi-coated for brilliant high
resolution; adjustments are tactical-type with 1/8 minute clicks
• 30mm style is vertically split
• Includes rings and a clamp-on flat-top mount for Picatinny and
• Wrench included with each set Weaver rails
Specify: (LW-50) ........................................................... $599.00
1” Low
(W-20524) ............................................$15.95 per pair
1” Medium LEaTHErwOOd HI-LUX
(W-20515) ............................................ $15.95 per pair 30MM rEd dOT SIGHT
1” High • This compact red dot sight for 5.56mm/
(W-20525) ............................................ $15.95 per pair .223 Rem. caliber and other Picatinny or
30mm Medium Weaver rail applications was designed to
(W-20513) ............................................ $15.95 per pair offer quick target acquisition and easy “two-eyes-open” shooting
• The non-magnifying Leatherwood Hi-Lux 30mm red dot features
a 1 MOA dot, highest quality optical glass, elevation and
LEaTHErwOOd windage adjustments,heavy aircraft aluminum construction, and
CaMPUTEr M-1000 a matte black, non-reflective finish
2.5X—10X a.r.T. • The brightness of the red sighting dot is controlled by an
(aUTOMaTIC raNGING 11-position rheostat on the top of the sight with clearly marked
& TrajECTOry) rIfLESCOPE increments on the control knob
• Adaptable to a variety of calibers from .223 to .50 BMG • Long-lasting 3 volt type ECR2032 lithium battery
• All the shooter needs to do is place the reticle on the target, • Ribbed rubber rings protect the sight body against knocks and
zoom in to “frame” an area of known size (i.e. the 18” drops, and mounting on your rifle’s Picatinny/Weaver rail is
height of a buck’s chest cavity), aim, and squeeze the trigger made simple with the two knurled thumbnuts on the sight’s
• The M-1000 features multi-dial rings for up to 4 different ze- integral base
roes, a new Picatinny mount with built-in windage adjustment, • Limited lifetime warranty
and a “no math” mil dot reticle (LW-RD30) ......................................................... $83.95
• Construction is of quality optical glass, aircraft aluminum with
clear control knob increment markings, and a non-reflective
finish
a.r.M.S.® #22
(LW-44) ........................................................... $459.00
THrOw LEvEr
LEaTHErwOOd rINGS
HI-LUX 50MM rEd dOT • Patented 30mm steel rings
rIfLE SIGHT secured with A.R.M.S.®
• This larger Leatherwood red dot sight dovetail system to an extruded
offers a 50mm viewing area with an 88 foot aluminum platform
field of view at 100 yards • “No-Mar” pads protect the rail and spring loaded levers act as
• An integral Picatinny-type rail mount with large shock absorbers — guaranteed repeat zero hold
thumb screw clamp nuts makes installation/removal easy and Available in three heights:
offers excellent repeat zero
Low: 1/4” rise (ARMS 22L); Medium: 1/2” rise (ARMS
• 1 MOA red dot system is powered by an ECR2032 lithium
battery (included) 22M); High: 3/4” rise (ARMS 22H) .......$123.50 per pair
• Dot brightness is controlled by a 12-step rotating switch;
windage and elevation adjustments are built in and covered by a.r.M.S.® #37 rING INSErTS
protective caps • Steel inserts that allow use of 1” diameter scopes within 30mm
• Limited lifetime warranty ring sets
(LW-RD) ........................................................... $105.95 (ARMS 37) ......................................................... $29.00

www.bushmaster.com 73
SIGHtS/ScopeS/MountS

A.R.M.S.® #40l low


A.R.M.S.® #19 weAveR/StAnAG
pRofIle flIp-up ReAR SIGHt
tHRow leveR Mount
•  A design improvement on the A.R.M.S.® #40 (below), this sight 
•  Mount scopes, sights, etc. directly onto the A3 flat-top receiver 
achieves a super low profile (.610 height when folded) and 
with guaranteed repeat zero or, with an A.R.M.S.® #2 carry 
uses the same rugged lock down quick release lever and “no 
handle mount, interfaces to M16A1/A2/M4
knockdown” stainless steel retention spring
(ARMS 19) ....................................................... $159.95
•  A unique “sandwiched” dual aperture flip-up combines a 
stationary close combat aperture and a 300-meter long distance 
accuracy aperture
•  The automatic zero stainless steel retention plate and clamping 
bar/pin won’t rust; other parts are matte black finished
•  This sight includes a newly designed, miniaturized windage 
A.R.M.S.® #19A tHRow leveR adjustment knob, will fit any mil. spec. flat-top Picatinny rail, 
cHAnnel Mount foR AcoG SIGHtS and is as robust as the rest of the A.R.M.S.® #40 series
•  The “channel” mounts Trijicon® ACOG® scopes to mil. spec.  •  It carries U.S. Pat. No. 5,533,292
Picatinny/Weaver rails with convenient A.R.M.S.® repeat zero 
Note: This sight is designed to work in conjunction with the 
throw levers (positioned on left side so as not to obstruct the 
A.R.M.S.® SIR system fore-ends in our Handguards section. Due 
rifle’s ejection port)
to the aperture height on this sight, you should order the .040 
(ARMS 19 A)  
(ARMS 19 A) .................................................... $170.00 taller front sight post.
(ARMS 40L)  ..................................................... $119.95

A.R.M.S.® #2 Scope Mount


foR M16 A1/A2
•  An excellent handle mount type scope platform for the AR15/
M16 rifles featuring the Swan universal mounting platform 
which accepts most all current military and police sighting  A.R.M.S.® #40 StAndARd A2 flIp-
systems, including NATO Stanag and Weaver-type rails, without  up ReAR SIGHt
the need for adaptors •  This U.S. patented flip-up rear sight locks down with a quick 
•  Other features include: see-through channel for iron sight use;  release lever when not in use (shown in both deployed and 
fast positioning with fixed toggle bolt; self-locking thumbnut,  lock-down positions)
will not loosen; repeatable zero hold
•  Its flip-up combines a 250-300 meter close combat aperture and 
(5855-01-299-777)  ........................................... $68.95 a 500-600 meter aperture with a horizon line feature that helps 
lead distant targets
•  The automatic zero stainless steel retention plate and clamping 
bar/pin won’t rust; all other parts are matte black finished; fits 
any mil. spec. flat-top Picatinny rail
•  This sight includes a newly designed, non-protruding, windage 
adjustment knob
•  Due to the aperture height on this sight, you should order the 
A.R.M.S.® #5 MultIBASe .040 taller front sight post 
•  A quick detach, multiple eye relief mount featuring a   Note: This sight is designed to work in conjunction with the 
spring loaded clamping bar and NATO Stanag & Weaver rail  A.R.M.S. SIR system fore-ends shown in our Handguards section
fastening
(ARMS 40) ....................................................... $116.95
•  Easily mounts to Picatinny/Weaver-type rail or flat-top receiver 
with locking, captivated thumbnuts
(ARMS 5) ........................................................... $68.95

74 Phone orders: 1.800.998.7928


a.r.M.S.® FOldING FrONT SIGHTS
•  Solves the problem of trying to fold the  
well-known triangle shape of the  
conventional non folding front sights 
• Barrel mounted in place 
•  Utilizes a rugged spring loaded angled  
support system to eliminate getting caught  
up in brush and other combat hazards 
•  Also uses the standard front sight post
(ARMS 41-B)  .................................................... $147.50
(ARMS 41-BL) Includes Lug  ................................ $153.50 B.M.a.S. FOldING FrONT SIGHT/
GaS BlOCk
•  An all steel gas block/folding front sight combination easily actu-
ated with the push of a button ; locks in the deployed position, 
it includes a standard AR front sight post, detent and detent 
spring, and is the same weight as a standard AR sight tower
•  Split design allows it to be mounted onto barrels that already 
have pinned or welded muzzle brakes or suppressors; attaches 
easily with 4 cap screws (use of Loctite is recommended)
a.r.M.S.® #39a2 BI-lEvEl raIl
•  Includes bayonet lug and sling loop; manganese phosphate 
•  Mounts to M16A1 & A2 carry handle for multiple combinations  finished for protection, it is shown flipped up in the foreground 
of attachments and provides rigid support of the dovetail  and folded in the shadowed image (above)
platform that is extended over the handguards
•  This unit fits all standard AR15-Type barrels with a .750” 
•  A “brush breaker” on the front will prevent branches from snag- diameter at gas port
ging under the rail, and a “see-through” channel in the #39A2  (YHM-9394)  ...................................................... $91.95 
upper rail allows the use of existing iron sights.
Note: This rail system will NOT mount on the A3 removable carry 
handle
(ARMS 39) ....................................................... $148.95 

BUSHMaSTEr® MOdUlar aCCESSOrIES SySTEM dETaCHaBlE FrONT FlIP


SIGHT aNd THrEE-raIl GaS BlOCk
•  The B.M.A.S. Detachable Front Flip Sight (patent pending) clamps snugly on the gas block’s top Picatinny rail with socket head screws for 
repeat zero every time 
•  Machined from aircraft aluminum billet, it locks up or flips down at the touch of a button. Standard A2 front sight post with spring and 
detent locking system offers elevation zeroing just as with the original M16A2 sight.
• The B.M.A.S. Three-Rail Gas Block can be ordered on new barrels as a factory installed option, or we can factory retrofit existing sight bases 
on .750” or .625” diameter barrels 
•  Its three rails are in standard Picatinny configuration to allow addition of flashlight or laser as side-mounted accessories. 
•  The B.M.A.S. Three Rail Gas Block is precision milled from alloy steel, finished in black manganese phosphate, and drilled and tapped on the 
bottom for the addition of a sling swivel stud (Note: this stud is not intended as a bipod mount)
B.M.A.S. Detachable Front Flip-Up Sight only 
(YHM-9371K)  .................................................... $77.50
B.M.A.S. Three-Rail Gas Block only 
(YHM-9370)  ...................................................... $56.50
Front Flip-Up Sight/Three-Rail Gas Block set 
(YHM-9370K) ................................................... $127.95
Three-Rail for .625” Barrel 
(YHM-9370-625) ................................................ $56.50
Three-Rail Kit for .625” Barrel
(YHM-9370-625K)  ............................................ $127.95

www.bushmaster.com 75
SIGHTS/SCOPES/MOUNTS
B.M.A.S. FIxEd B.M.A.S. lOw w PrOFIlE
ClAMP-ON FrONT SIGHT IGHT rEAr FlIP SIGHT IGHT
•  A standard height front sight,   •  This flip-up rear  
this unit adds the convenience   sight for flat-top  
of a quick detach knurled   receivers features a  
thumbnut and clamping bar   steel base, a quick release  
release
for easy removal  thumb screw and an aluminum stem
•  Returns to zero upon reattachment and includes standard AR 
includes standard AR •  Locks up (deployed position) with the push of a button and folds 
front sight post and detent system — adjustable for elevation down to .840 inches above the upper receiver
(YHM-9495K)  .................................................... $50.50 •  Windage adjustment is 1/2 MOA, and a dual aperture rear 
peep is fitted
•  Mounts to any Picatinny rail and will “co-witness” with standard 
B.M.A.S. lOw AR15, M16 and M4 type front sights
PrOFIlE ClAMP-ON
•  Once sighted-in, it can be removed and reattached with no loss 
FrONT SIGHT of “zero”
•   A low profile front sight of quality   •  Fits behind A.R.M.S. SIR system fore-ends
alloy steel that folds flat at the  
(YHM-9680)  ...................................................... $91.95
touch of its side button to allow  
clearance for any large bell scope
position with repeatability,
•   It flips up to lock in the deployed position with zero repeatability, 
and includes a standard, AR front sight post and detent system.  B.M.A.S. ClAMP-ON
Black phosphate finished; made in USA. rEAr FlIP-UP SIGHT
(YHM-9584K)  .................................................... $78.95 •  An aircraft grade aluminum,  
flip-up auxiliary sight featuring dual apertures
apertures
• 1/2 MOA windage adjustment
• Black anodized finish
•  Convenient right hand adjustment knob and full height sight 
apertures
•  Height when folded is 1/8” lower than similar designs
(YHM-9440)  ...................................................... $79.95

BUSHMASTEr MOdUlAr
ACCESSOrIES SySTEM (B.M.A.S.)
FrONT FlIP SIGHT FOr V MATCH
rIFlES ANd CArBINES
•  A high quality front sight that clamps around the V Match milled 
sight base/gas block — designed to be used with any open 
iron rear sight 
•  This patent pending front flip sight is machined from aircraft 
aluminum with an anodized finish, installs with  
an Allen wrench, locks up or down with a push button and is 
elevation adjustable
•  A standard front sight post is included, and the base is drilled 
and tapped for our B.M.A.S. sling swivel stud (see YHM-9364)
(YHM-9360K)  .................................................. $106.50

76 Phone orders: 1.800.998.7928


A B BUSHMASTER MOdUlAR AR
B.M.A.S. SCOPE RISERS ISERS ACCESSORy SySTEM
•  Increase scope mounting height on flat-top style ARs by 1/2” to  SCOPE RISER
achieve proper cheek weld  •  This riser solves problems of scope movement or rocking  
•  Hard anodized aircraft aluminum — fit all Picatinny/Weaver  that might be encountered with individual riser sections
rails •  A 5.25” Picatinny rail section mounts on any flat-top upper to 
• Two required for scope mounting; sold individually raise the platform 1/2”
A. 3/4” Long •  Perfect on varmint rifles — accepts most types of scopes, red 
 (YHM-9490)  ..................................................... $13.50 dot sights and other optics
B. 1 1/4” Long •  Machined from aircraft quality aluminum and hardcoat anodized 
(YHM-226)  ........................................................ $15.95 to military specifications
(YHM-227A) ....................................................... $32.95

RISER BlOCkS fOR PICATINNy


RAIl flAT-TOPS A B C
•  Black anodized aluminum  
riser blocks offer extra  
height for proper sight picture and comfortable cheek weld
and comfortable cheek weld
(LW-RB)  .................................................... $13.95 each

B.M.A.S. ANGlEd
ACCESSORy MOUNTS
•  Angled rail segments designed to mount various  
accessories at a 45° angle on a “flat-top” upper receiver or any 
B.M.A.S. RAIl ExTENSIONS —
multi-rail type fore-end
4”–7”–11.25” lENGTHS
•  Useful for flashlights or laser aiming devices, or with a pair you 
•  These precision machined rail extensions — in standard Pica- could mount a scope in an “offset” position and still retain iron 
tinny rail dimensions — mount on all flat-top upper receivers to  sight use
elevate the mounting surface approx. 1/2” 
•  Available in 3 different lengths: A — One slot (3/4” length); 
•  The two longer lengths can join and solidify the upper receiver to  B — Three slot (1 3/8” length); and C — Five slot  
any four rail fore-end offering the extra mounting surface length  (2 1/8” length)
necessary for very large/long scopes or “scout-style” mounting
•  Machined from aircraft quality aluminum and finished in matte 
•  All 3 rails offers the convenience of quick detach/reattach with  black hard anodize, mount to your rail surface with socket 
knurled thumbnuts  head screws
•  Anodize finished machined aluminum with phosphated steel  A. One Slot Mount
thumbscrews and clamping bars
 (YHM-9486A) .................................................... $21.95
4” Q. D. Rail Extension B. Three Slot Mount
 (YHM-9595)  ..................................................... $39.95  (YHM-9690A)  ................................................... $26.50
7” Q. D. Rail Extension  C. Five Slot Mount
(YHM-9592)  ...................................................... $62.95  (YHM-9691A) .................................................... $30.95
11.25” Q. D. Rail Extension
 (YHM-9590) ...................................................... $86.95

www.bushmaster.com 77
SIGHTS/SCOPES/MOUNTS
B.M.a.S. SUPErlIGHT
BarrEl BUSHINGS
•  A set of thicker steel bushings  
to mount the triple rail kit  
(below, left) to the thinner  
BUSHMaSTEr
USHMaSTEr a3-TyPE Bushmaster SuperLight barrels
rEMOvaBlE Carry HaNdlE (YHM-640-4) ...................................................... $13.95 
$13.95
wITH 1/2 MOa rEar SIGHT
•  Add versatility to your “flat-top”— clamps solidly onto the 
Picatinny rail of any V Match or “flat-top” upper receiver with 
knurled thumbnuts, and includes an A2 dual aperture rear sight 
with 1/2 MOA windage and elevation adjustment 
•  Machined from aircraft aluminum forging, with steel sight and 
clamp parts
(9349063-9)  ................................................... $116.95 
M203 GrENadE laUNCHEr
QUadraNT SIGHTS
fOr a2 & a3 TyPE rIflES
•  These are government issue quadrant sights for the M203 
grenade launcher 
BENNIE COOlEy CO-wITNESSING •  Sights include a flip-out post & aperture system, combined 
adjUSTaBlE MOUNT with an elevating scale set in 25 meter increments from 50m 
•  This optics mounting platform for the A2 carry handle AR15/ to 400m
M16 is the most versatile co-witnessing mounting system made •  There are models for both the A2 solid carry handle rifles and 
•  Vertically adjustable for easy alignment and custom fitting of  carbines and the A3 removable carry handle type (they are not 
any red dot optic (EOTech Holosight, Trijicon Reflex, Aimpoint  interchangeable)
Comp or others) in relation to the iron sights of the rifle. Mounts  For A3 Removable Handle Rifles 
with a hex-head nut/threaded post, and height adjustments  (12598114) ..................................................... $105.50
are made to the Picatinny rail with 8/32 button head retaining  For A2 Solid Carry Handle Rifles
screws and the supplied 3/32” Allen wrench. (9346304) ......................................................... $81.95
(EOT-12)  .......................................................... $165.00

B.M.a.S. HaNdGUard
MOUNTEd flIP-UP SIGHT
B.M.a.S. TrIPlE MOUNT raIl KIT •  The Bushmaster modular accessories system solution to a 
•  A quality multi-purpose accessory mount that clamps to the  handguard mounted backup iron sight is this low profile, front 
barrel and fits around the front sight with three separate rail  flip-up unit
surfaces to allow mounting flashlights, bipod, laser sights, etc. •  It attaches to any fore-end Picatinny rail and folds down out of 
•  Designed to fit both Post- & Pre-ban barrels (with bayonet lug),  line of sight at the push of a button
there are insert bushings included with this kit that allow fitting  •  It locks up in a deployed position and mounts easily with a large 
to either .720” diam. rifle barrels (20”/24”) or .740” diam. knurled thumb screw
(14.5”/16”) carbine barrels •  Low profile, durable and lightweight all steel construction and 
•  This triple mount will accept all Picatinny/Weaver base  manganese phosphate finished,  includes AR square post, detent 
attachments, and is machined from high quality aircraft aluminum  and spring; elevation adjustable just like the standard sight
with Allen head clamping screws. Finished in black hard anodize  B.M.A.S. Handguard Mounted Flip-up Sight
to match rifle.
(YHM-9627) ....................................................... $81.95
(YHM-639K)  ...................................................... $89.95 

78 Phone orders: 1.800.998.7928


ACCESSORIES
B.M.A.S. FlAT-TOP ClETUS FRONT SIGHT
FIxEd REAR SIGHT PICATINNy RAIlS
• This AR15-Type fixed iron • Mounts on the bayonet lugs under your front sight
sight offers the option of • Very useful for mounting items, like lights, vertical grips and
mounting optics further forward on the flat-top rail sling connectors
• The sight’s base is a heavy, black anodized aluminum block; • Three options available:
other parts are steel
1) Without “ring”
• Windage and elevation adjustments are 1/2
2) With “ring” for right-handed shooters
(YHM-643K) .................................................... $102.50
3) With “big ring” for left-handed shooters
(10003) ............................................................ $64.95
KwIK-SITE
SEE-THRU SCOPE
MOUNT ANd
SCOPE RING SET
• For A1 or A2 rifles with the solid carry handle, this mount
features a wide, see-through channel to enable
the use of existing open sights
• Mounts to the handle with a large thumbnut
• A pair of 1” horizontally split scope rings is included
(KSN-M16) ......................................................... $53.95

BUSHMASTER GAS PISTON RETRO-FIT CONvERSION KIT


FOR AR15/M4-TyPE CARBINES
Now you can easily add the gas piston system benefits of reliability, ease of maintenance, ability to fire a wider variety of ammunition, cooler
running, and consistent function with this Bushmaster gas-piston
• Patent pending, short stroke piston conversion system that includes all the necessary parts to convert your gas impingement type carbine
• Low maintenance piston housed within a tubular structure that pins right into your existing front sight base
• Vents the gases under the handguard and away from the operator
• The high performance bolt carrier features increased mass, an integral impact lug and specially designed anti-wear features to protect your
receiver
• Readily installed into your factory upper receiver assembly without permanent modifications to your carbine
• Supplied with the kit are heat shielded M4 (oval) type handguards designed specifically to withstand rapid fire heat
• Fully functional for both semi-automatic and full-automatic weapons and can be easily installed at home with simple hand tools
The unit pictured below had just successfully completed — without failure — a 10,000-round non-stop endurance test!
(GP-GSR) M4 Barrel ........................................... $399.95
(GP-GSR-HB) Heavy Barrels ................................. $399.95
M4 Type
Handguards w/
Heatshields
Carrier,
Piston Housing Piston and
Support Piston
Housing
Bolt Operating Rod
Carrier with Spring
with Striker and Upper
Face Receiver Guide
Sleeve

www.bushmaster.com 79
accessories
eagle Padded rifle cases for
ar-tyPe rifles & other firearMs
•  Each case features a lockable outside cargo compartment; 
adjustable magazine pouches; reinforced 2” wide carrying 
M7 Bayonet with M10 scaBBard
handles; heavy duty YKK zippers; and a 2” wide, padded 
•  Fits 20” & 14.5” Bbl. AR15/M16 and AR180 shoulder strap attached to welded steel D rings
(GC-BAYO SCAB KIT)  ............................................ $34.95 •  These quality Eagle cases will fit most standard military-type 
AR15/M16 rifles
Full Size Rifle Case 
(RC-4123)  ......................................................... $79.95
• Approx. internal dimensions: 40” x 11” 
Carbine Sized Case 
(RC-36)  ............................................................. $79.95
M9 Bayonet with scaBBard
• Approx. Internal Dimensions: 36” x 11” 
•  Designed to serve as a bayonet, a fighting knife, field knife and 
wire cutter 30” Carbine Sized Case 
 (RC-3223)  ........................................................ $79.95
•  It fits many Bushmaster models, as well as other M16 and 
AR15-Type rifles  • Fits FNC, LAR Para 30” & Tele AKs
•  Features a heavy 7.25” steel blade fitted with a checkered,  Extra Long Barrelled Rifle Case 
black composite plastic handle (RC-4608)  ......................................................... $79.95
•  Black oxide finish blade to reduce glare, and includes machined  • Approx. internal dimensions: 45” x 10”
saw teeth on back edge • This case will fit FAL 44 1/2” & LAR-HB 45” rifles.
•  Overall length is 14.5” (36.8 cm) and weight is 28 oz. (.79 
kg)
(GCC-M9 BLK BAYO)  .......................................... $109.99
NOTE: Bayonets are designed to fit only 14.5” & 20” barrelled 
rifles and will only work with certain flash suppressors/muzzle 
suppressors/muzzle
brakes, such as birdcage types, Izzy brakes, Phantoms, Mini & 
brakes, Phantoms,
Y-comps. Consult Bushmaster sales if you have questions about a 
Bushmaster sales if you have questions
particular application.
application. BushMaster logo
eMBroidered carrying cases
Logo Embroidered Carbine Case 
(RC-36A)  ............................................................ $85.95
• Approx. internal dimensions: 36” x 11” 
the
he BushMaster rifle case Logo Embroidered Rifle Case (RC-4123A)  ................ $85.95
•  Economical
Economical storage or travel protection for your Bushmaster, or 
storage or travel protection • Approx. internal dimensions: 40” x 11” 
other firearms
firearms •  A case for full-sized rifles, with Bushmaster logo embroidered in 
•  47”x 9”x 3”dimensions, this case holds a full sized AR15/M16 
3”dimensions, red and white 
rifle, or a scope mounted AR with receivers separated 
•  Shipping for first case is $7.50; additional cases: $6.00 each 
Bushmaster Rifle Case
(10483)  ............................................................ $18.95

u.s. PeacekeePer nylon


dePloyMent Bag
•  Designed specifically for the Bushmaster ACR® rifle
•  Adjustable straps for securing the rifle, a spare barrel pocket, 
BushMaster large hard case wide elastic bands to accommodate three 30-round magazines
•  Oversized, hard-sided rifle case perfect for storing an ACR®  and  •  Removable padding, two drain vents, wrap-around carry handles 
accessories and double zippers 
•  Clamshell-style design of durable black plastic with egg-crate foam  • Available in black with subdued Bushmaster logo
lining and four snap closures  (F1006548)  ...................................................... $49.95
(F1000942)  ..................................................... $44.95

80 Phone orders: 1.800.998.7928


the “life JacKet”
safety Device
for ar15/m16 rifles ifles
• Polycarbonate clamshell enclosure
locks up your AR-type rifle and covers
the entire action
• Two separate keyed locks and keys are included
Discreet carrying
case for carbines • Foam padded interior with fixed carry handle
• 32” black Cordura low profile case NOTE: To use the life jacket on a rifle with our V Match tubular
aluminum fore-end, some material will have to be removed
• Includes four interior magazine pouches (for up to 40 rd. mags) from the front opening.
and a padded outside pocket for accessories (L J -1) .............................................................. $29.95
• Approximate internal dimensions: 32” x 13”
Discreet Case for Carbines
(DC-CAR-15) ....................................................... $85.95
Discreet Case for Rifles
(DC-M16/AR15) ................................................. $85.95
• A similarly styled model with inside dimensions of 41” x 13”
— designed for full-sized AR15/M16
Discreet Case for Uzi Short Bbl. SMGs vapor ii glasses
(DC-22) ............................................................. $85.95 (R-01535) ......................................................... $12.95
• Approx. internal dimensions of 22” x 11” • Sleek, sporty style
• Wrap-around polycarbonate lens with anti-fog coating
• Soft nose bridge prevents slipping
• Lightweight frame design
• Meets ANSI Z87+ and CSA Z94.3 standards
bushmaster blur folDer by
peltor presiDent
Kershaw — a Ken onion Design
hearing protector
• Premium quality knife features a 13C26 stainless steel blade for
strength and corrosion resistance • Peltor’s President model features
exclusive liquid foam ear cushions
• Specifications: Blade length — 3 3/8” (8.6 cm); Closed that are designed for all-day comfort,
length — 4 1/2” (11.3 cm); Weight — 4.2 oz. and the padded stainless steel wire
(1670RD) .......................................................... $94.95 headband and generously sized
earcups automatically self-align for perfect fit and protection
bushmaster • The President offers a noise reduction rating of 24 decibels, and
sighting-in its earcups can be adjusted in height from the headband
targets • The headband will fold down around the earcups for compact
(QP-015K) .......$2.95 / Pkg. of 12 storage
(AOS97069) ...................................................... $24.95

bushmaster
schematic
parts poster
(Color printed on 80# glossy stock paper)
14.5” barreled M4A3-Type carbine (shown)
(QP-010B) ................................ $4.95
20” barreled A2 Semi-Automatic Rifle
(QP-010) ............................................................. $4.95

www.bushmaster.com 81
accessories/apparel

Bushmaster logo mug


(QP-016) ............................................................. $4.95

Bushmaster Knit caps


Orange Knit Cap (QP-002OR)
Black Knit Cap (QP-002B)
Navy Blue Knit Cap (QP-002N)
Gray Knit Cap
(QP-002G) ...................................................$9.95 each
Black Skully Hat
Bushmaster logo patch (GTB) ........................................................$12.95 each
(QP-012) ............................................................ $2.95

Bushmaster logo Decal


(QP-013) ............................................................. $1.95

Bushmaster BlacK & tan cap


Black Cap
(QP-001) ............................................................. $9.95
Tan Cap
(QP-001T) ............................................................ $9.95

Bushmaster BomBer hat


Black (QP-200B) or Khaki (OP-200S) ..................... $24.95

82 Phone orders: 1.800.998.7928


Bushmaster Blaze orange
hunter’s cap
Bushmaster sport shirts
(QP-002OH) ....................................................... $10.95
• A 50/50 blend knit sport style shirt with collared,
three button neck
• Bushmaster snake logo embroidered in two colors
on upper left chest
• Comfortable, durable, and great for the field,
range or sporting event
• Order with the part numbers shown below followed
by your size: S–M–L–XL–2XL
White
(QP-002W & size) .............................................. $24.95
Black
(QP-002 & size) ................................................. $24.95
Bushmaster two-tone cap
(QP-002TTBR) ...................................................... $9.95

Bushmaster Fleece-lined
Jackets
Bushmaster canvas cap • Lots of the folks at the Bushmaster factory stay warm all the
(QP-002BR) ......................................................... $9.95 Maine winter long with this fleece-lined jacket
• Its Toughlan® nylon shell is windproof and water resistant; it has a
winter weight 11.5 oz. fleece lining and 3 zippered pockets
(2 outer and 1 inner)
• Bushmaster logo is embroidered in red and white on the
left chest
• Available in black with black fleece lining, or khaki tan with
green fleece lining
• Order with the part numbers shown below followed by your
size: S–M–L–XL–2XL–3XL–4XL–5XL
Black
(QP-8800BB & size) ........................................... $69.95
Khaki
(QP-8800TG & size) ............................................ $69.95
www.bushmaster.com 83
accessories/apparel

Bushmaster logo sweat shirts Bushmaster logo


•  Heavy Jerzees “Super Sweats” crewneck pull-over sweatshirts  emBroidered t-shirt
(50% cotton/50% polyester) •  Heavyweight and high-quality 100% cotton
•  Bushmaster snake logo embroidered in red/white/black   •  Embroidered red and black Bushmaster snake logo  
on upper left chest on upper left chest
•  Order with the part numbers shown below followed   •  Order with the part numbers shown below followed  
by your size: S–M–L–XL–2XL by your size: M–L–XL–2XL
Khaki Tan  White 
(QP-021K & size)  ............................................... $27.95 (QP-007 & size)  ................................................. $14.95 
Black 
(QP-021B & size)  ............................................... $27.95
Gray 
(QP-021G & size)  ............................................... $27.95

Bushmaster long sleeve


logo emBroidered t-shirt
•  Heavyweight ultrablend 50% cotton/50% polyester
Bushmaster screen
printed t-shirts •  Embroidered red and black Bushmaster snake logo  
on upper left chest
•  Quality blend 50% cotton/50% polyester
•  Order with the part numbers shown below followed  
•  Bushmaster snake logo silkscreened in two colors on upper left 
by your size: M–L–XL–2XL
chest with larger variations on the back
Black 
•  Order with the part numbers shown below followed  
by your size: S–M–L–XL–2XL (QP-0222B-L & size)  ........................................... $16.95 
Black
(QP-003 & size)  ................................................. $15.95 
White 
(QP-003W & size)  .............................................. $15.95

84 Phone orders: 1.800.998.7928


ORDERING INFORMATION
ORDERING INSTRUCTIONS/SHIPPING INFORMATION

FOR FASTEST ORDER PROCESSING, visit our website and order direct from our online catalog at www.bushmaster.com

Our entire catalog and more is on the Internet — offering easy and secure ordering without waiting time on the phone! Many of our orders
received via Internet are processed and shipped the same day (with the exception of back ordered items). Any orders that include e-mail ad-
dresses automatically get a return mail confirmation of shipment including the type of shipping service, a FedEx tracking number (if applicable),
and notification of multiple packages. Customer service and technical support inquiries can also be handled quickly and efficiently by e-mail.
Contact us at: Customerservice@bushmaster.com • Techsupport@bushmaster.com • Export@bushmaster.com

For Telephone Orders, Call: 1-800-998-7928


Bushmaster sales consultants are on call: Mon. through Fri.: 8:30 am–7:00 pm (Eastern Standard or Daylight Savings Time — all other hours
of the day by answering machine)

For Orders by FAX: 1-207-892-8068 • Customer Service: 1-800-883-6229


(Customer Service Phone Hours: Monday through Friday, 8:30 am–6:00 pm)

All catalog prices are in U.S. dollars — please pay in U.S. currency

CATALOG PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!


Current pricing can be seen on our website — www.bushmaster.com

Please have your credit card available. FREE gunsmithing and assembly is available on most AR15/M16 parts at the time of purchase.
We accept purchase orders from federal, state and local governments and institutions.

SHIPPING — Orders will be shipped promptly via FedEx or First Class U.S. Mail. FedEx Ground is our standard method of shipment
Standard Overnight (1 day), FedEx 2 Day, and FedEx Express Saver (3 day) services are available upon request. All orders must be ac-
companied with cash, credit card information, money order or cashier's check. We request telephone numbers and/or e-mail address when you
order to provide the best possible service in case of questions. In an effort to preserve your privacy, we do not sell our mailing lists. An F.F.L.
(Federal Firearms License) is required for the purchase of complete rifles, serial numbered lower receivers, or M16 components. Other parts and
accessories do not require special licenses. Personal checks are held 15 days to clear. No refunds after 30 days of invoice date. Returned parts
will incur a 20% restocking charge.

NOTE: FedEx has a mandatory “Adult Signature Required” (21 years or older) for all complete firearms and lower receiver shipments. This
Adult Signature Requirement is a FedEx regulation and cannot be waived.

PISTOLS — Federal law requires that all pistols be shipped by Air Service. FedEx’s mandatory “Adult Signature Required” (21 years or older)
will also be in effect.

DAMAGE — If your FedEx package arrives damaged, you must alert the FedEx driver, or call FedEx to notify them of damage problems and to
initiate a claim. The FedEx toll-free national telephone line for this purpose is 1-800-GO-FEDEX.

INTERNATIONAL ORDERS — Bushmaster will now accept international orders of any amount, subject to U.S. State Department (ITAR) and
Dept. of Commerce regulations. Bushmaster does have established dealers in countries outside the U.S. who may be able to supply
— contact Bushmaster for further information.

For shipping parts only — within continental U.S.


(Shipping to Puerto Rico and other territories is charged at cost.)
Shipping, handling & insurance charges for FedEx Ground Service or U.S. Mail are:
$0.00 - $19.99 = $6.50 / $20.00 - $49.99 = $9.00 / $50.00 - $99.99 = $11.50
$100.00 - $249.99 = $14.50 / $250.00 - $499.99 = $18.00 / $500.00 and up = $21.00

For shipping complete firearms – within continental U.S.


Standard rifle: FedEx Ground — $16.50 ea.; DCM rifle: FedEx Ground — $19.50
Pistols: BY LAW — must be shipped by Air Service.
Free shipping on back-ordered “parts” only. Shipping charges on parts orders over 20 lbs. will be calculated by weight only using our FedEx
published rates plus insurance of .50¢ per $100.00 value.
FedEx Standard Overnight (1 day), FedEx 2 Day, and FedEx Express Saver (3 day) services are available upon request.

www.bushmaster.com 85
ordering information
order form Your fastest ordering method is on the internet at www.bushmaster.com
Ship To:

Name Customer No.


(If available – see catalog label)

Address

City State ZIP

Phone Number E-mail

Method of Payment: o Check or money order enclosed (Personal checks are held for 15 days to clear.)
o MasterCard o VISA o American Express o Discover
All credit card orders must include phone number and must be shipped to address where cardholder receives credit card billing.

If payment is made with o Gift Certificate (Certificate Number)


Credit Card Account Number Expiration Date

Signature
Ship Via: o FedEx Ground (our standard method – other services available)
o U.S. Mail – PARCEL POST (No C.O.D.s*)
Have you ordered from us before? o Yes o No Would you like to receive future catalogs? o
Page Price
Qty Part No. DescriPtioN amouNt
No. (each)

Shipping, handling & insurance charges for parts only — FedEx Ground Service or U.S. Mail: other FedEx services are available at extra SUbTOTAL
cost — consult your salesperson.
All States Sales Tax
$ 0.00 - $19.99 = $ 6.50 $100.00 - $249.99 = $ 14.50
$20.00 - $49.99 = $ 9.00 $250.00 - $449.99 = $ 18.00 Shipping, Handling & Insurance
$50.00 - $99.99 = $11.50 $500.00 - up = $ 21.00
ToTal amounT
Standard Rifle – FedEx Ground – $16.50 ea. / DCM Rifle – FedEx Ground – $19.50
Pistols must be shipped by Air Service. Shipping will be free on back-ordered “parts” only.
Shipping charges on parts orders over 20 lbs. will be calculated by weight only using our FedEx
published rates plus insurance of .50¢ per $100.00 value.
Call about shipping orders to Hawaii, Alaska, Puerto Rico and other U. S. Territories.

SATISFACTION GUARANTEED, OR YOUR MONEY BACK.


PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
86 Phone orders: 1.800.998.7928
Customer serviCe, exChanges,
BaCk orders, gunsmithing, Warranty

NOTE: With the “Sunsetting” of the Gun Legislation of 1994, many features of “Pre-ban” rifles are again available — BUT not in all areas!
California, Connecticut, Hawaii, Massachusetts, Maryland, New Jersey, New York, Puerto Rico, and possibly others, all have their own statutes
regarding what they call “assault weapons.” To avoid the possibility of legal problems, check your local laws before purchasing some items
offered in this catalog.

CUSTOMER SERVICE. Our telephone personnel are highly experienced and well informed firearms enthusiasts. If you have any questions about
Bushmaster products, you'll find a courteous member of our firm willing and able to answer them — just call our toll-free customer service line
(1-800-883-6229) between 8:30 am–6:00 pm, Monday through Friday, (EST). We will also be happy to promptly answer your questions or
order inquiries via e-mail to: Customerservice@bushmaster.com

EXCHANGES. Should items you order from Bushmaster not be to your expectations, please contact our customer service department for a Return
Merchandise Authorization (RMA) number. Unused items may be returned within 30 days, include a copy of your invoice. Note: Any custom
barrel assembly — not shown in catalog — may not be returned. No refunds allowed after 15 days of invoice date. Restocking charge 20%.
Include invoice with your return — its upper left corner can be used as return label. Return all pieces of kits — wrap and package them
securely. Insure package for your protection. Include the reason for return of each item in an accompanying letter, and we will do everything
possible to speed your exchange.

BACK ORDERS. We make every attempt to deliver your order from available stock — immediately. Should there be a back order on a part,
we'll ship the bulk of your order and WE pay the shipping on the back-ordered part (with the exception of complete rifles). FedEx Standard
Overnight (1 day), FedEx 2 Day and FedEx Express Saver (3 day) services are available upon request at additional charge.

BUSHMASTER GUNSMITHING. Our company policy is to offer gunsmithing assembly at no charge when parts are purchased from us (with the
exception of sight bases). We will also offer our professional gunsmithing services to any customers who care to ship us their firearms or as-
semblies for repair or buildup — and we will work on brands other than Bushmaster. Gunsmithing time is charged at $40.00 per hour, and we
charge a $16.50 fee for return shipping of your rifle, upper or parts ($19.50 for DCM Rifles due to extra weight). For a gunsmithing estimate,
please call 1-800-998-7928 or e-mail to: Techsupport@bushmaster.com

BUSHMASTER LIMITED ONE YEAR WARRANTY. Bushmaster Firearms are warranted to be free from defects in materials and workmanship. Any
such defect of which Bushmaster Firearms International, LLC is given written notice, as provided below, within one year and ten days from
the date of first purchase by a customer will be remedied by Bushmaster Firearms International, LLC. This warranty is granted by Bushmaster
Firearms International, LLC, P.O. Box 1479, 999 Roosevelt Trail, Windham, Maine 04062.

To initiate a warranty claim, call Bushmaster customer service (toll free: 8:30 am to 6:00 pm EST – Monday thru Friday 1-800-883-6229) to
get an RMA number (“Return Merchandise Authorization”). Warranty claims should state (in writing) the model and serial number of the fire-
arm concerned, a description of the difficulty experienced, and the date of purchase. The firearm concerned should be shipped (transportation
charges prepaid), to the Warranty Service Department, Bushmaster Firearms International, LLC, 999 Roosevelt Trail, Windham, ME 04062.
Firearm shipment should be insured by the owner, as Bushmaster Firearms International, LLC will accept no responsibility for loss or damage in
transit.

Shipping and insurance charges for the return of a firearm to its owner will be paid by Bushmaster Firearms International, LLC if the related
claim is a proper claim for warranty work.

Under no circumstances shall Bushmaster Firearms International, LLC be responsible for incidental or consequential damages with respect to
economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the
exclusion of limitation of incidental or consequential damages, so the above limitation may not apply to you. Bushmaster Firearms Interna-
tional, LLC will not be responsible for the results of careless handling, unauthorized adjustments, defective, low quality, reloaded, or improper
ammunition, corrosion, neglect, ordinary wear and tear or unreasonable use. Furthermore, the liability of Bushmaster Firearms International,
LLC under this warranty shall be limited solely to the obligation to repair or replace the firearm, and to pay transportation and insurance charges
for return of the firearm to owner.

NOTE: Handguns and long guns are classified as FIREARMS or DANGEROUS WEAPONS. Guns are surrendered by Bushmaster Firearms
International, LLC with the express understanding that it assumes no responsibility for resale handling under local laws and regulations.

A NOTE REGARDING LEAD. Discharging firearms in poorly ventilated areas, cleaning firearms or handling ammunition may result in exposure
to lead, a substance known to cause birth defects, reproductive harm and other serious physical injury. Have adequate ventilation at all times.
Wash hands thoroughly after exposure to lead.

www.bushmaster.com 87
Since 1978, the finest commercial AR-type platform rifles in the world.
Stringent quality and unmatched product engineering. The professional choice
of law enforcement and defenders of freedom around the world. Ready for
anything. Prepared for everything. At Bushmaster,® respect is earned.

Bushmaster
Bushmaster Firearms
® ®
Firearmsinternational,
international,llC.
llC.
999
999roosevelt
roosevelttrail
trail• P.o.
• P.o.Box
Box1479
1479
Windham,
Windham,me me04062
04062

www.Bushmaster.Com
www.Bushmaster.Com
Phone
Phoneorders:
orders:1-800-998-7928
1-800-998-7928
Customer
CustomerserviCe:
serviCe:1-800-883-6229
1-800-883-6229

Find Bushmaster on Facebook at


bushmaster.com/facebook.

MR 1010 Bushmaster is a trademark of Bushmaster Firearms International, LLC. Magpul is a trademark


of Magpul Industries Corp. Facebook is a registered trademark of Facebook, Inc.
© 2011 Bushmaster Firearms International, LLC, Windham, ME 04062

You might also like