Professional Documents
Culture Documents
ASSEMBLY
Transmission Special Tool(s)
Installer, Fluid Filler Tube
Special Tool(s) 307-376
Alignment Cone
307-455
(Continued)
(Continued)
Material
Item Specification
MERCON SP Automatic MERCON SP
Transmission Fluid
XT-6-QSP
15. Using the special tool, install a new manual 18. Install the roll pin into the case.
control lever seal.
28. Install the ring gear, hub and the No. 15 hub
bearing.
67. Check the seating of the torque converter. 68. Use the special tool to hold the torque converter
in place when installing the transmission.
1 Place the straightedge across the converter
housing.
2 Make sure there is a gap between the
converter pilot face and the straightedge.
3 Remove the special tools.