Professional Documents
Culture Documents
BACKGROUND OF DEVELOPMENT
SaniTtal G… Series
Revolutionary!!
3
WHY WEAR CHEMICALS?
Chemical-based Antimicrobial:
Many people use chemical-based antimicrobial to eliminate microbial. But why wear
chemicals? They bring negative effects on human body. What’s the use of such
antimicrobials if they are not safe to our body?
SaniTtal G… series
SaniTtal G-01 : For all textile goods, papers & some hygienic products
SaniTtal G-400 : 400% form, for textile, ink & other hygienic products
Material: on cellulosic goods (Cotton, Rayon etc.), with 40 g/l of SaniTtal G-01
o Exception : Klebsiella pneumoniae = 70 g/l, Trichophyton rubrum = 90 g/l
o On other substrates, higher quantity of SaniTtal G-01 gives the similar effect
Main Symptoms :
o We mentioned main symptoms only. Each bacteria, fungus above bring forth
more kinds of symptoms & disease.
Here we have mentioned the effect on the most widely-known microbial only. However,
SaniTtal G…. series are very effective in eliminating many other bacteria, fungi etc.
5
DUSTMITES
Facts:
We shed 10,000 million scales of bacteria laden skin each day, most end up in our
mattresses.
Dust mites produce 200 times it’s body weight in excrement during their normal life
span.
Dust mites feast for up to 170 days on our shed skin.
Dust mites spread rapidly. A female dust mite lays 300 eggs.
They can live without food for up to a year.
7
Dust Mites cannot stand hot water and the allergens are very water soluble. Washing pillows
is also advisable, but this would require synthetic pillows. If hot washing is not possible, 24
hours in the freezer will kill all the dust mites in a pillow. This will not remove the allergens,
so should be followed by a cold wash.
SaniTtal G-01
Anti-bacteria & antimicrobial aftercare
Properties:
Field of application :
Substrate : Goods of most of natural & synthetic fibres, especially
cellulosics
Aggregate : Padding, spray, exhaust machine
Operation : High-graded and elegant finishing
Compatibility : Highly compatible with almost all finishing agents &
additives
Influence on handle : Gives softener handle on the treated goods
Influence on shade : Doesn’t normally impair the shade of treated goods.
However, applying higher quantity can bring forth alight
yellowing
Absorbency : Provides better absorbency
Biodegradation : 100% bio-degradable
Features:
100% natural Antimicrobial:
o It is completely free from other chemicals. So it is safer than any other existing
antimicrobial in the world.
Deodorant effect:
o Conventional chemical-based deodorants shows negative effect to our body if
inhaled. Other perfume-based deodorant brings negative odor as the treated
goods wet by perspiration etc.
o Is an effective deodorant : i.e. 70% deodorant effect at 40 g/l on cellulosics
o Eliminates unpleasant odors by blocking microbial & fungal growth.
o If applying higher quantity (i.e. more than 70 g/l), it shows deodorant effect.
o Keeps excellent deodorant effect even after frequent laundering.
Mutation Problem:
o Chemical-based antimicrobial brings mutation problem at next generation.
o And other so-called natural antimicrobials that contains chemicals (chitosan etc.)
brings mutation.
o SaniTtal G-01 is free from mutation problem
o SaniTtal G-01 is the safest antimicrobial that have ever developed in the world.
Application:
Textile Goods:
SaniTtal G-01 provides wonderful effect in all textile applications including followings:
o All wears: underwear, outwear, sportswear, apparels
o Baby & children clothing, protective workwear (military, laboratory, hospital etc.)
o Hospital & medical goods: linen, gauze sponge, bandage, wear for
patient/doctor/nurse etc.
o Hosiery (socks, panty hose), lingerie
o Mask (general mouthwear & surgical Mask).
o Towels (terry towel, sports towel etc.)
o Blanket, bedding (bed sheet, bed spread, mattress etc.), sleeping bag
o Disposal wipes for cosmetic grade (cleaning pad/wipes/ball etc.)
o Tablecloth, sanitary napkin for restaurant. Other disposable wipes
o Carpet & special rug, other home furnishing (curtain, sofa etc.)
o All other “well-being” articles & sanitary textile goods
Padding Exhaust
General Finish:
On 100% cellulosic goods 40~50 g/l 4.5~6.0% (o.w.f.)
On blends with cellulosics 50~70 g/l 6.0~7.5% (o.w.f.)
On other substrates * 60~80 g/L 6.0~9.0% (o.w.f.)
Special Finish (for superior effect):
On all substrates** 80~100 g/l 7.0~12.0% (o.w.f.)
PH pH 4~9 (best=5~7) pH 4~9 (best=5~7)
Pick-up 80% above
Immersion time ----- 50~80ºC x 15~20 min.
Drying temperature 120 ~ 200ºC Above 100ºC
Drying time 3 min.~30 sec. As usual
SaniTtal G-01 shows the best and maximum effect on 100% cellulosic goods.
It shows 2nd best effect on blends with cellulosic goods (PES/CEL, PA/Co etc.).
The 3rd best effect is expected on acetate and fine micro fibre
Other substrates*:
o If applying higher quantity, SaniTtal G-01 also shows good effect on other
substrates such as acetate, polyester, polyamide, wool, silk, acryl goods etc.
Microfibre (PES,PA.):
o Very good effect on the goods of fine microfibre (less than 0.1 denier).
o The finer the constitution of substrates, the better effect can be obtained.
Thickness of substrate:
o Good effect on the substrate with general thickness or thick fabrics. On very thin
fabrics, applying quantity should be increased by 15~20% (against the quantity
shown in “general finish”).
Applying at padding process is much better in effect & more economical than exhaust.
Pick-up above 80% is very important- from the beginning till the end of padding system.
o The higher the pick-up ratio (up to 100%), the better antimicrobial effect is
expected. If the pick-up ratio is less than 80%, it brings less antimicrobial &
deodorant effect. If the pick-up ratio is less than 80%, they are requested to reduce
the stenter speed to provide sufficient pick-up and the applying quantity of
SaniTtal G-01 should be increased proportionately (maximum, as the quantity
given in “special finish” above.)
In exhaust process, sufficient immersion time & drying (above 100ºC) is required.
o The longer the immersion time, the better SaniTtal G finish is expected
o E.g. 50~80ºC x 15~20 min
If other finishing agents & additive are to be put into bath at the same time,
o Please firstly put those additives & auxiliaries before adding SaniTtal G
SaniTtal G-01 can bring about slight yellowing if applying higher quantity:
o On very white goods generally : not above 40 g/l;
o use with 2~3 g/l of SaniTtal S-10L if there’s no significant yellowing, try to use
maximum quantity. Also try to select other FWAs (in different shades) to apply
more quantity
o on pale shaded good: do not use it more than 80 g/l.
Surgical mask:
The ideal surgical mask should be completely free from chemicals such as bleaching
agent, FWA, dyestuffs, chemical-based antimicrobial etc. to protect the people from
breathing chemicals.
o Ideal substrates: cellulosics goods (cotton, rayon, Tencell etc.)
o Treatment : pretreat the goods without any chemicals
then finish with 4.0~6.0% o.w.f. of SaniTtal G-01
Test condition:
Culture Trichophyton rubrum ATCC 28188 – for 21 days under.
Temperature: 28~35ºC Humidity : 85% and test it on
Material: socks treated by 8.0% of SaniTtal G-01
Test results: Grade 0 (no growth of bacteria), ASTM G 21-1996 (AATCC TM 30)
** To check maximum avoidance rate at maximum washing (50 times), we applied excessive
quantity of SaniTtal G-01 in this test. For normal effect (i.e. 20 times washing), general
applying quantity will be sufficient.
SaniTtal G-400
Anti-bacteria and antimicrobial aftercare
Description:
Concentrated form (400% form) of SantiTtal G-01
100% natural component
Higher economy: designed for diluters and dealers
Can be applied directly as well (without dilution)
Properties:
Appearance : Brownish or bluish*1 opaque liquid
Chemical nature : Vegetable organic extract
Ionic nature : Nonionic
pH (1% soln) : 6.8 ± 0.5
Solubility : Easily soluble at cold or warm water
Field of application :
Substrate : goods of most of natural & synthetic fibres,
especially cellulosics
Aggregate : padding, spray, exhaust machine
Operation : high-graded and elegant finishing
Influence on handle : Gives softener handle on the treated goods
Biodegradation : 100% bio-degradable
Storage stability : 6 months at 5 ~ 300C *2 under sealed containers &
proper condition. The product may settle down
under prolonged storage. But if can be used again
after simple stirring.
Storage condition : Please store it under cool place without direct
sunlight.
Shipping : Non-red lable. Non-hazardous material
*1 Being a natural component, the color of the product can be different from brownish to
bluish.
*2 Storing at high temperatures (above 35º) can shorten the storage life of the product. Ideal
storage temperatures = 5 ~ 15ºC, but avoid freezing)
Dilution
For producing 1000 ml of SaniTtal G-01:
Application:
Refer literature of SaniTtal G-01. You can use the above diluted form or you can directly
apply ¼ quantity of SaniTtal G-400 without dilution.