Professional Documents
Culture Documents
DTC display:
When the DTC display activated the ABS warning light will blink. The code is a Double-digit display. By counting the
number of times the ABS warning light flashes, the DTC code can be determine. See the table below for the DTC
descriptions.
The first code displayed is the normal DTC 12 and signifies the start and stop of a DTC flash sequence. It is displayed three
times. If any other DTCs are stored in the EHCU they will be displayed three times. If no other DTCs have been stored then
the display of DTC 12 will be repeated 3 times. The sequence repeats for 5 minutes or until the ignition switch is switch OFF
or the jumper is removed.
Additionally, the EHCU memory will be cleared upon driving the vehicle above 8 mph and no faults detected by the EHCU.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
12 - -