Professional Documents
Culture Documents
pid=1029M
The Insect Mounting Kit contains all the products needed to properly mount most insects. The
booklet How to Make an Insect Collection, produced by BioQuip, is also included. This kit
allows the both the novice and the professional entomologist to purchase a comprehensive
package at a substantial discount from prices of items purchased separately. The kit contains
one each of the following items:
A plastazote foam strip, 3/8" (.95cm) thick, is inserted in the center pinning groove, which is
adjustable from 0" to 3/4" (1.9cm). Width is changed by pushing the balsa strips across the
smooth surfaces to the desired width. Adjusting screws increase or decrease resistance as
needed, or lock width into permanent position.
Balsa pinning strips are resurfaced by wiping with wet, soapy sponge to close pin holes, then
sanding with fine paper when dry.
Overall length is 14-1/2" (36.8 cm); overall width is 5" (17.2 cm).
Pinning Forceps Insect pinning forceps have rounded and serrated tips with goose
neck shanks, with guide pin; forged steel, heavily plated, 4-1/2" (115 mm) long.
Note: #7 pins do not fit in Cal. Academy drawers unless points are shortened.
$4.45
1208B000 BIOQUIP INSECT PINS #000 BLACK, 100/PACK Qty 10+ $4.00
1208B00 BIOQUIP INSECT PINS #00 BLACK, 100/PACK Qty 10+ $4.00
Useful for holding four sizes of insect pins, this wood pin holder measures 2 x 2 x
1-1/4" high (51 x 51 x 32 mm). Sides and corners are beveled, and pin sizes can be written on
sides of block for easy reference. Convenient when only a few pin sizes are required. Especially
suitable for student use.
1146S FOUR-HOLE PIN HOLDER SQUARE $5.25
HOW TO MAKE AN INSECT COLLECTION - BioQuip
1992, 2nd edition, 32-page booklet with drawings, written for the beginning or
young collector. Describes simple procedures for collecting, preparing and storing insects.
Includes illustrated guide to 24 orders of insects, suggested reading list, and collecting
guidelines. 5-1/2 x 8-1/2".
9038 TO MAKE AN INSECT COLLECTION $2.00
Traditional, three-step style pinning block is made of hardwood, with pin holes set at 23 mm, 12
mm and 7 mm. Block is 1 x 3" (25 x 76 mm high).
1144 PINNING BLOCK THREE STEP $1.95
Note: #7 pins do not fit in Cal. Academy drawers unless points are shortened.
1208B00 BIOQUIP INSECT PINS #00 BLACK, 100/PACK Qty 10+ $4.00
Pinning strips are ideal for holding Lepidoptera wings on spreading boards. Simply unroll the
required length of paper and cut. The strips are split from high-quality glassine material and
come in rolls of approximately 40 meters (131 feet). Several sizes may be mounted on a dowel
for simple dispensing. Five sizes are available from 10 to 40 mm (.4 to 1.6") wide.
1134P LEPIDOPTERA PINNING STRIPS, 10 MM X 40 M $4.25
1134Q LEPIDOPTERA PINNING STRIPS, 15 MM X 40 M $4.95
1134R LEPIDOPTERA PINNING STRIPS, 20 MM X 40 M $6.30
1134S LEPIDOPTERA PINNING STRIPS, 30 MM X 40 M $7.65
1134T LEPIDOPTERA PINNING STRIPS, 40 MM X 40 M $9.00
Blank Labels
Using high-quality index card stock, BioQuip blank labels have fine black borders printed with
permanent black latex ink. Easily cut apart with scissors, they accept any ink for entering data,
although we recommend pens using permanent ink or India ink.
Blank labels with catalog numbers 1210 - 1214 are are packaged in lots of 20 cards with 50
labels per card (1,000).
'Order' blank labels, catalog number 1220, are packaged in lots of 12 cards, 24 labels per card
(288).
'Genus' or 'Species' blank labels, catalog number 1221, are packaged in lots of 12 cards, 36
labels per card (432).
'Sex sign' labels, catalog number 1222, are packaged in lots of 12 cards, 50 of each sign per card
(600).