Professional Documents
Culture Documents
delivers unrivalled user value. The WorkPlace Air for a separate compressor room, while the integration of
SystemTM allows the compressor to be moved out of all necessary air treatment and condensate management
the compressor room and installed directly at the point equipment significantly reduces the required
Low noise
The noise level of the WorkPlace Air SystemTM is little more than that of a sewing machine
Outstanding performance
The WorkPlace Air SystemTM combines the most coveted screw element design with the most
Complete integration
Both air treatment and condensate management equipment can be fully integrated into the
The WorkPlace Air SystemTM is available from 7.5-125hp, as either air or water cooled with a
wide range of operating pressure between 60-188 psig to meet any customer requirement.
The benefits of advanced technology
The unique Atlas Copco Elektronikon® control system not only optimizes the running of the
compressor, the air treatment and the condensate management equipment, but it also allows
condensate treatment equipment. This integration also eliminates the interconnecting piping
average of 10% Atlas Copco GA VSD compressors offer even further opportunities to reduce the energy cost of
installation 2%
savings with
operating an air compressor. Most production facilities show an air demand profile with wide
WorkPlace Air SystemTM
fluctuations that traditional compressor regulation systems can not follow in an energy efficient
• reduced installation
• reduced leakage manner. A GA VSD compressor is able to follow fluctuations in demand efficiently by varying
• reduced pressure drop
the speed of the drive motor to perfectly match the compressor's output to the varying plant
demand. Energy savings with GA VSD compressors of up to 35% are not uncommon over
investment 12% traditionally regulated compressors. In addition, the integration of air treatment equipment
up to 35%
savings with maintenance 9% reduces costly pressure drops and risks of leaks which often account for 10% of the total
VSD η -drive compressed air consumption.
Outstanding reliability
The complete WorkPlace Air SystemTM range is designed, manufactured and tested in
accordance with ISO 9001, ISO 14001 and ISO 1217 ed. 3 annex C respectively. Each and every
unit is tested before leaving the factory, ensuring that the high expectations of today's industry
The WorkPlace Air System is designed with maintenance costs in mind. Long service intervals
combined with a mechanical friendly layout, ensure low costs and minimal down time.
From concept to installation and from advice to preventative maintenance, Atlas Copco is your
1. Elektronikon®
1 Automatic electronic control and monitoring of the compressor
optimizes the operation for efficiency, reliability and ease of
maintenance.
2. Fan
Low speed radial fan provides a high cooling air flow
at extremely low noise levels.
3. Integral coolers
Compact coolers dimensioned to ensure ideal running
temperatures under all conditions and are easy to clean.
6. Drive arrangement
Gear driven for optimal energy efficiency and minimal
maintenance. Utilizes flexible coupling for reduction of starting
torque loads on compressor components.
7. Motor
High efficiency, totally enclosed fan-cooled (TEFC), IP55,
class F electrical motor is flanged and permanently aligned
with the compressor to ensure continuous, trouble-free
operation.
4
5
6
7
8. Element 10 9
Atlas Copco's patented screw element provides optimal energy
efficiency and outstanding reliability.
11
Total Air System Control
Elektronikon® - The superior choice
The high cost of low quality air The quality air solution
When the air that surrounds us is The WorkPlace Full FeatureTM machine offers a unique air
compressed, its vapor and particle treatment solution. In addition to the compressor, all air
concentration increases dramatically. treatment and condensate management equipment can be
The compression process causes the oil and water vapors integrated into the compressor canopy, ensuring that your
to condense into droplets, and then mix with the high compressed air supply is both clean and dry. Aside from
concentration of particles. The resulting mixture is an providing clean, dry, compressed air, the Full Feature
abrasive, oily sludge that in many cases is also acidic. machine offers a more optimized, quiet and space saving
package, which is fast, easy and less expensive to install.
Without air treatment equipment, much of this corrosive
sludge will enter the air net, corroding the pipe work, When quality air is required, there is no better choice
damaging pneumatic tools and potentially compromising than a WorkPlace Full FeatureTM machine.
final product quality.
GA WorkPlace FF with IFD & Class 2 integrated filters 1 micron 35-39°F 0.1 ppm 2.4.2
GA WorkPlace FF with IFD & Class 1 integrated filters 0.01 micron 35-39°F 0.01 ppm 1.4.1
GA WorkPlace FF with ICD & -70°C PDP option 0.01 micron -100°F 0.01 ppm 1.1.1
Integrated filtration removes both particles and oil from
minimum power.
contaminated condensate.
Minimum
pressure valve Oil filter
Air intake valve
Air/air heat
exchanger Evaporator DD filter
Air intake filter (optional)
Oil cooler Capillary tube
Intake air
Hot gas bypass valve
Oil
Standard options
GA 5C
0C
-5
-9
30
55
GA
Customizing the compressor package to suit your Class 1 filter kit (only Full Feature version) •
requirements through the utilization of standard options. Class 2 filter kit (only Full Feature version) • •
Dryer bypass • •
Oil-water separator (OSD) • •
Electronic water drain (EWD) • •
Energy recovery • •
Modulation control • •
Synthetic PAQ oil • •
Food grade oil • •
Lifting device • •
Rain/outdoor weather protection • •
Freeze protection • •
Main motor
filters anti-condensate heater + thermistor protection • •
Phase sequence relay • •
Main power isolator switch • •
Special colors • •
ModBUS interface • •
ProfiBUS interface • •
Cooling water shut off valve • •
High ambient version (HAV, 120°F) • •
OSD EWD
Minimum Filter
pressure valve Oil filter
Air intake valve
Oil cooler
Air intake filter
Desiccant
Intake air Aftercooler material
Non-return valve
Oil
Compressor Max. compressor Compressor capacity Motor power Noise level** Weight
type working pressure (FAD)* WorkPlace WP FF (IFD) WP FF (ICD)
50Hz bar(g) psi(g) l/s m3/hr cfm kW hp dB(A) kg lbs kg lbs kg lbs
GA30-7.5 7.5 109 93 335 197 30 40 65 830 1830 920 2029 1406 3100
GA30-8 8 116 89 320 189 30 40 65 830 1830 920 2029 1406 3100
GA30-10 10 145 78 281 165 30 40 65 830 1830 920 2029 1406 3100
GA30-13 13 189 64 230 136 30 40 65 830 1830 920 2029 1406 3100
GA37-7.5 7.5 109 115 414 244 37 50 66 970 2139 1080 2381 1504 3316
GA37-8 8 116 110 396 233 37 50 66 970 2139 1080 2381 1504 3316
GA37-10 10 145 98 353 208 37 50 66 970 2139 1080 2381 1504 3316
GA37-13 13 189 78 281 165 37 50 66 970 2139 1080 2381 1504 3316
GA45-7.5 7.5 109 134 482 284 45 60 67 970 2139 1080 2381 1536 3387
GA45-8 8 116 122 439 259 45 60 67 970 2139 1080 2381 1536 3387
GA45-10 10 145 120 432 254 45 60 67 970 2139 1080 2381 1536 3387
GA45-13 13 189 100 360 212 45 60 67 970 2139 1080 2381 1536 3387
GA55C-7.5 7.5 109 158 569 335 55 75 70 1035 2282 1150 2536 1613 3557
GA55C-10 10 145 141 508 299 55 75 70 1035 2282 1150 2536 1613 3557
GA55C-13 13 189 121 436 257 55 75 70 1035 2282 1150 2536 1613 3557
GA55-7.5 7.5 109 175 630 371 55 75 66 1400 3087 1550 3418 2095 4619
GA55-8 8 116 166 598 352 55 75 66 1400 3087 1550 3418 2095 4619
GA55-10 10 145 145 522 307 55 75 66 1400 3087 1550 3418 2095 4619
GA75-7.5 7.5 109 243 875 515 75 100 68 1500 3308 1650 3638 2195 4840
GA75-8 8 116 230 828 488 75 100 68 1500 3308 1650 3638 2195 4840
GA75-10 10 145 202 727 428 75 100 68 1500 3308 1650 3638 2195 4840
GA75-13 13 189 171 616 363 75 100 68 1500 3308 1650 3638 2195 4840
GA90C-7.5 7.5 109 263 947 558 90 125 73 1600 3528 1750 3859 2245 4950
GA90C-8 8 116 259 932 549 90 125 73 1600 3528 1750 3859 2245 4950
GA90C-10 10 145 229 824 485 90 125 73 1600 3528 1750 3859 2245 4950
GA90C-13 13 189 196 706 416 90 125 73 1600 3528 1750 3859 2245 4950
Notes
(*) Unit performance measured according to ISO 1217, Ed 3, Annex C-1996
Package capacity (FAD) does not include purge losses, incurred when using a desiccant dryer.
Reference Conditions
- Absolute inlet pressure 1 bar (14.5 psi)
- Intake air temperature 20°C (68°F)
(**) Mean noise level measured according to Pneurop/Cagi PN8NTC2 test code, tolerance 2 dB(A)
Package outlet pressure reduction, due to pressure drop across integrated dryer, at reference conditions:
- Integrated refrigerant dryer (excluding optional filters) 0.2 bar
- Integrated desiccant dryer (including standard filters when new, but wet) 0.45 bar
Technical data - 60Hz
GA30-90C
Compressor Max. compressor Compressor capacity Motor power Noise level** Weight
type working pressure (FAD)* WorkPlace WP FF (IFD) WP FF (ICD)
60Hz bar(g) psi(g) l/s m3/hr cfm kW hp dB(A) kg lbs kg lbs kg lbs
GA30-100 7.4 107 93 335 197 30 40 65 830 1830 920 2029 1406 3100
GA30-125 9.1 132 85 306 180 30 40 65 830 1830 920 2029 1406 3100
GA30-150 10.8 157 72 259 153 30 40 65 830 1830 920 2029 1406 3100
GA30-175 12.5 181 66 238 140 30 40 65 830 1830 920 2029 1406 3100
GA37-100 7.4 107 117 421 248 37 50 66 970 2139 1080 2381 1504 3316
GA37-125 9.1 132 104 374 220 37 50 66 970 2139 1080 2381 1504 3316
GA37-150 10.8 157 93 335 197 37 50 66 970 2139 1080 2381 1504 3316
GA37-175 12.5 181 83 299 176 37 50 66 970 2139 1080 2381 1504 3316
GA45-100 7.4 107 140 504 297 45 60 67 970 2139 1080 2381 1536 3387
GA45-125 9.1 132 126 454 267 45 60 67 970 2139 1080 2381 1536 3387
GA45-150 10.8 157 114 410 242 45 60 67 970 2139 1080 2381 1536 3387
GA45-175 12.5 181 101 364 214 45 60 67 970 2139 1080 2381 1536 3387
GA55C-100 7.4 107 158 569 335 55 75 73 1035 2282 1150 2536 1613 3557
GA55C-125 9.1 132 144 518 305 55 75 73 1035 2282 1150 2536 1613 3557
GA55C-150 10.8 157 132 475 280 55 75 73 1035 2282 1150 2536 1613 3557
GA55C-175 12.5 181 125 450 265 55 75 73 1400 3087 1550 3418 2095 4619
GA55-100 7.4 107 175 630 371 55 75 67 1400 3087 1550 3418 2095 4619
GA55-125 9.1 132 156 562 331 55 75 67 1400 3087 1550 3418 2095 4619
GA75-100 7.4 107 240 864 509 75 100 69 1500 3308 1650 3638 2195 4840
GA75-125 9.1 132 212 763 449 75 100 69 1500 3308 1650 3638 2195 4840
GA75-150 10.8 157 193 695 409 75 100 69 1500 3308 1650 3638 2195 4840
GA75-175 12.5 181 175 630 371 75 100 69 1500 3308 1650 3638 2195 4840
GA90C-100 7.4 107 263 947 558 90 125 74 1600 3528 1750 3859 2245 4950
GA90C-125 9.1 132 242 871 513 90 125 74 1600 3528 1750 3859 2245 4950
GA90C-150 10.8 157 222 799 471 90 125 74 1600 3528 1750 3859 2245 4950
GA90C-175 12.5 181 203 731 430 90 125 74 1600 3528 1750 3859 2245 4950
Danger: Compressed air should never be supplied as breathing air unless air is properly purified for
1310 9053 94 FAB 8/03 20M
breathing. Atlas Copco assumes no responsibility or liability related to the purchaser’s/user’s breathing
air system.
The information contained herein is general in nature and is not intended for specific construction,
installation or application purposes