Professional Documents
Culture Documents
in/category/six-sigma-tools
Six Sigma
The Indian Six sigma Portal
Home
Six Sigma
06-Feb-2010
Comments: (0)
It helps in finding the root causes, identifying the problematic areas and comparing the relative importance of
different causes. It is also used to the organization diagramming, parts hierarchies, project planning, tree
diagrams, and the 5 Why’s.
The C&E diagram is also famous as the fishbone diagram because it resembles the skeleton of a fish, with the
main causes categories drawn as “bones” attached to the spine of the fish.
Chi-square test
A chi-square test (also chi-squared or ?2 test) is any statistical hypothesis test used to compare observed data
with data we would expect to obtain according to a specific hypothesis and in which the sampling distribution
of the test statistic is a chi-square distribution when the null hypothesis is true.
Chi-square test practices null hypothesis, which states that there is no significant difference between the
expected and observed result in an event.
1 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Some examples of chi-squared tests are Pearson’s chi-square test, Yates’ chi-square test, Mantel-Haenszel
chi-square test, Linear-by-linear association chi-square test, The portmanteau test in time-series analysis,
testing for the presence of autocorrelation.
Control Charts
The control chart, also known as the Shewhart chart or process-behaviour chart, is a tool used in statistical
process control for determining whether a business process is in a state of statistical control or not. It is also
known as a special-cause variation.
All points will be plotted within the control limits in case the process is in control,. Any observations outside
the limits suggests the introduction of a source of variation which is new and unanticipated.
As increased variation means increased quality costs, a control chart revealing the presence of a
special-cause calls for immediate investigation. Thus the control limits are a crucial decision aids. The control
limits suggests about process behaviour .
Continue Reading
05-Feb-2010
Comments: (0)
In the beginning of a new process, the effective application of these tools and techniques ensures successful
implementation of Six Sigma Quality initiatives.
Six Sigma uses a great number of established quality management tools and methods which are applied not
only in Six Sigma projects but also outside applications as well.
Affinity Diagram
The objective for the development of affinity diagram was discovering meaningful groups of ideas within a
2 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
raw list. It emphasize on allowing the groupings emerge naturally by using the right side of the brain. Basically
it is used to refine a brainstorm into something which can be dealt more easily and that makes sense.
Ishikawa recommends using the affinity diagram in variety of situations like when facts or thoughts are
unorganized and not certain, to overcome preexisting ideas or paradigms, to clarify the ideas and when unity
within a team is required.
Analysis of Variance
Analysis of variance (ANOVA) is a statistical term which defines the collection of statistical models with
their associated procedures. Here the observed variance is partitioned into components because of different
explanatory variables. Simply, ANOVA produces a statistical test of whether the means of several groups are
all equal
Fixed-effects models (Model 1): It is based on the assumption that the data coming from normal populations
which are differing only in their means.
Random effects models (Model 2) : It is based on the assumption that the description of data reveals a
hierarchy of different populations whose differences are constrained by the hierarchy.
Mixed-effect models(Model 3): It explains the scenarios where there is presence of both fixed and random
effects.
Usually there are several types of ANOVA depending on the number of treatments and the way they are
applied like one way Anova, Factorial Anova, mixed design Anova.
Continue Reading
10-Jan-2010
Comments: (0)
3 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Six Sigma focuses on the customer satisfaction that leads to profitability and thus aims at reducing variation.
This goes against the principles of innovation. Therefore the relationship between Six Sigma and Innovation is
both complementary and opposite to each other.
(1) Six Sigma drives out the variation from the system, while innovation encourages the diverse thinking.
(2) Six Sigma optimizes the processes and product tradeoffs however innovation relies on breaking the mold
so that the tradeoffs are not necessary.
(3) Six Sigma focuses on precision and is basically data driven while innovation leads to the creation of
emotional experiences.
(4) The basic aim of the Six Sigma lies in making the organization profitable by increasing the cash flow
however the innovation stresses on taking the calculated risks.
(1) Customer Interface: Innovation is about generating novel ideas and ways that lead to creation of
commercial value. This level exploits the market opportunities through better ways to connect existing
capabilities with the existing needs.
(2) Core Strategy: It assist in expanding the market opportunities by connecting the existing capabilities to
new needs. It focuses on mission differentiation criteria against competitors.
(3) Strategic Resources: This level expands market opportunities by connecting the new capabilities to
existing needs. It includes the core competence, key strategic assets and processes.
(4) Value Network: This level creates new markets by developing new capabilities to meet new needs and it
includes the suppliers, partners and coalitions.
Continue Reading
08-Jan-2010
4 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Comments: (0)
Certain steps are necessary to be followed in correct sequence so that Six Sigma measures are calculated
without any defects. Six Sigma calculator is the tool that is applied for the measurement of the quality in Six
Sigma Metrics.
Six Sigma Metrics used for the calculation of Sigma Level are as follows:
Defects Per Million Opportunity (DPMO): The calculation of the Sigma level is done on the basis of number
of defects per million opportunities(DPMO). For the calculation of DPMO, three distinct pieces of
information is needed
DPMO = (Number of defects * 1,000,000)/ (No of defect opportunities per unit)*(no of units)
Critical To Quality (CTQ): Applying the CTQ is the key for measuring any product or process, whose
performance standards must be met consistently for satisfying and exceeding the customer needs. CTQ should
5 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
It is an excel spreadsheet that is applied as a tool for the Sigma Level Calculation. It is used for the
determination of the number of data points or sample size. It is for the elimination of the properties of
population
Process Sigma Calculator: This is used for defining the unit, opportunity, defect, DPU, DPMO, defects(%),
and yield (%) in a Six Sigma Project.
Continue Reading
07-Jan-2010
Comments: (0)
In a Six Sigma project. the focus on customers and its performance standards shows up in the form of metrics
that assess project’s ability to meet their customers’ demands and business objectives.
Six Sigma Metrics can be categorized as Classical Metrics and Typical Metrics.
Classical Metrics It contains measures of quality involving timeliness, accuracy, ease of doing business and
cost. They are important and emphasis is given on them as vital aspects of most companies’ Six Sigma
measurement framework.
6 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Typical Metrics It contains various specialized measures like DPMO, DPU, FPY, RTY and Sigma Level. A
Sigma Metric offers an effective alternative to traditional process capability and performance measures as
used in Statistical Process Control.
DPMO is a Six Sigma Metric which stands for ‘Defects Per Million Opportunities’ . Six Sigma process
improvement projects targets to achieve 3.4 or fewer Defects Per Million Opportunities. DPMO is usd to
compare the defect rates of simple and complex items and provides a common standard.
DPU is a Six Sigma Metric which stands for ‘Defects Per Unit’. It refers to the average number of defects per
unit based on the processing of a number of units. For example if 100 units are made and five fail, four
reworked, and one scrapped then DPU is 0.05.
The First Pass Yield is the proportion of units that, on average, go through a process first time without defects
in a Six Sigma project
Rolled Throughput Yield (RTY) is a probability that a unit can pass through a process without defects ina Six
Sigma project. It is result of the product of the first pass yields at every step:
RTY = y1 x y2 x y3 x ………..yn
where the yi values are the yields at each step before rework
The first step is about measuring the right things which not only includes the financial performance but also
other aspects of the business like customers, performance of internal work process, suppliers, financial and
employee satisfaction as well.
Second step is to create the metrics which are SMART an acronym for Specific, Measurable, Actionable,
Relevant, and Timely.
Specific means Metrics are specific and directed at a particular area you are measuring.
Actionable means that clarity over which direction to take and easy to understand and to take action.
Relevant means measuring only meaningful things, determine effective measures, including both performance
and diagnostic metrics.
Metrics should be simple and can be categorized into performance Metrics and diagnostic Metrics.
Performance Metrics means high level measures which are external in nature and are related to the customer
requirements, business needs and outputs.
Diagnostic Metrics means measures which are internally focused and related to inputs and internal process
steps.
7 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Third Step is following a well proven method for developing metrics. It involves the identification of the
customers and outputs of the process, determination of customer’s requirements, ensuring the key goals of the
business and aligning the metric for the process with those of high level processes.
After the metrics are determined as what needs to be measured, a check needs to be done to ensure if the
metrics are making any sense, how they can be compared with the existing metrics, do they form a complete
set covering the areas like time, quality, cost, and customer satisfaction and whether they display the desired
behavior.
Continue Reading
07-Jan-2010
Comments: (0)
Process Maps are more detailed than flowcharts and includes a timeline. Process Map is basically a
graphical representation of a procedure that displays a flow of a process and is used for detection of
shortcomings in a process. Process Map includes the usage of Flowcharts and Block Diagrams.
The graph in a Process Map includes the starting points and ending points of various processes and sub
processes, inputs, outputs and potential direction. Mapping of an entire process in detail needs several
sub-process maps in addition to overview process map or a Complex Block Diagram.
Flowcharts
A flowchart is a representation of a process graphically where it displays the entire process from beginning to
finish, showing various inputs, pathways with directions, action or decision points and completion of the
8 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
process. It basically serve as an instruction manual for facilitating detailed analysis and optimizing the
workflow and service delivery.
It includes the assorted block diagrams which are tied at various points in order to follow the complete
procedure. It contains an analogy process and various sequenced processes.
Continue Reading
07-Jan-2010
Comments: (0)
9 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Statistically, Six Sigma ensures that about 99.9997% of all products produced are of acceptable quality. Some
of the popularized statistical tools are as follows.
Minitab 15 includes the gage analyses and related tools to maintain higher standards of quality of the process
data. Minitab contains a full suite of Measurement Systems Analysis commands to check the measurement
system.
The capability index is useful for measuring the continual improvement using trends over time, for
prioritizing the order leading to process improvement and for determining process capability in meeting
customer requirements.
Others Statistical tools includes Rational Subgroups and Subgrouping, regression analysis, SigmaXL,
Variation.
Continue Reading
06-Jan-2010
Comments: (0)
10 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
(1) Analysis tools: They are used to perform statistical or process analysis. Six Sigma methodology applies
the advanced statistical solutions to the complex problems for process improvement and these tools make life
easier for the professionals.
(a) Microsoft Visio: It is a Microsoft Windows program that is diagramming in nature and uses vector
graphics for the creation of diagrams. It comes in two editions: Standard and Professional. They have
templates for advanced diagrams and layouts and possess unique functionality which helps users to connect
their diagrams to a number of data sources in addition to displaying the information graphically.
(b) Minitab is basically a statistics package used as an analysis tool distributed by Minitab Inc. It is often
used in along with Six Sigma implementation, CMMI and other statistics-based process improvement
methods. Minitab 15 is the latest version which is available in 6 different languages (English, French,
German, Korean, Simplified Chinese, & Spanish).
(c) STATISTICA : It is is a statistics and analytics software package which provides a selection of data
analysis, data visualization, data management, and data mining procedures. It is developed by StatSoft.
Other famous analysis tools which are commonly used are iGrafx process, IBM websphere Buiness Modeler,
JMP, SigmaXL, Statgraphics,Telelogic System Architect, etc.
(2) Program management tools : They are the set of tool which are used to manage and track a the entire
Six Sigma program of a corporation.
(3) DMAIC and Lean online project collaboration tools: These are the softwares which assist in
implementation of Six Sigma across local and global teams. They help in effective management of the
projects. One very famous Example is Grouputer Sigmasense.
Continue Reading
06-Jan-2010
Comments: (0)
11 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Six Sigma as a path breaking methodology for the business improvement has its own advantages and
disadvantages.
Advantages :
(1) Six Sigma is driven by the customer and thus aims to achieve maximum customer satisfaction and
minimizing the defects. It targets the customer delight and new innovative ways to exceed the customer
expectations.
(2) Implementation of Six Sigma methodology leads to rise of profitability and reduction in costs. Thus
improvements achieved are directly related to financial results.
(3) Six Sigma is successfully implemented in virtually every business category including return on sales,
return on investment, employment growth and stock value growth.
(4) Six Sigma targets Variation in the processes and focuses on the process improvement rather than final
outcome.
(5) Six Sigma is prospective methodology as compared to other quality programs as it focuses on prevention
on defects rather than fixing it.
(6) It is attentive to the entire business processes and training is integral to the management system where
the top down approach ensures that every good thing is capitalized and every bad thing is quickly removed.
Disadvantages
(1) Applicability of Six Sigma is being argued among the Six Sigma critics. They opined that the quality
standards should be according to specific task and measuring 3.4 defects per million as standard leads to more
time spent in areas which are less profitable.
(2) Six Sigma gives emphasis on the rigidity of the process which basically contradicts the innovation and
kills the creativity. The innovative approach implies deviations in production, the redundancy, the unusual
solutions, insufficient study which are opposite to Six Sigma principles.
(3) People argue that Six Sigma is a bit gimmicky and simply a rebranding of the continues improvement
techniques and tools as practiced by Toyota. It thus promotes outsourcing of improvement projects with lack
of accountability.
(4) Six Sigma implementation constantly require skilled man force. Thus control and employee dedication
are hard to accomplish if its not implemented regularly.
(5) While converting the theoretical concepts into practical applications there are lot to real time barriers
which needs to be resolved.
Continue Reading
06-Jan-2010
Comments: (0)
12 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Six Sigma case study talks about building up of the framework, related to the implementation of Six Sigma
methodology in the minds of the organizations. Case studies are developed basically on the benefits of Six
Sigma methodology leading to growth and improvement of organization and a project.
Case studies are made on wide range of fields across the business and industrial sector like IT, call centers,
large companies based in the US and India etc. This case study provides useful insight into the areas where
Six Sigma is being applied and what aspects of Six Sigma is more effective and adopted by the organizations
for their success in terms of quality, performance and cost reduction.
Case studies reveal that DMAIC is more frequently used Six Sigma methodology. Some of the key aspects in
which the help of Six Sigma is used for developing the case studies made are as follows:
Adopting a Business Process Approach to Management requires various critical steps by the organizations.
Case study reveals that critical steps required for the successful implementation of DMAIC are determining
the Customers and Stakeholders and benefits organization is providing them, determining the value
chain that deliver benefits, identifying process boundaries, selecting the process owner for each process,
beginning of never ending cycle Business Process Improvement, etc.
13 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Application of Six Sigma DMAIC methodology has resulted in vast improvement in the performance of
organization as evident by the numerous success stories across the globe. Some examples of the case studies
are as follows.
(1) Oil exploration and drilling company. Project was to Improve automatic well test process. Results :
Increase in test accuracy by 25% and Improvement in % of successful “workovers”.
(2) Vehicle maintenance support unit . Project was reduction of the high cost of vehicle maintenance.
Results : Moving technical experts to the field and Improved data collection techniques
(3) Large Electronics Company. Project was to Deflect yoke for TV. Results : Upgradation of the design
using DFSS tools and improvement in overall production process
(4) Automotive Project was failures of Crankshaft production Results : Application of Six Sigma tools to
stratify the errors which were due to grinding failures.
(5) Pharmaceutical Company. Project was Packaging- downtime of machines on the packing line was
excessive leading to lower than expected productivity Results : SOPs were developed, improvement in
Training and Variation in the adjustments and reduction of adjustment frequencies.
(6) Chemical Production Project was to improve production capacity and reduce variability of Methyl Ethyl
Ketone (MEK) and Ethanol Separation Unit. Results : improvement of Normal production rates for MEK and
Ethanol by more than 4% above previous maximum rate and decrease in Ethanol losses.
(7) Transactional Project was reduction in Employee productivity when employees transfer to different
jobs within the company. Results : Lost productivity resulted because of failure of direct deposits, interrupted
health care, increase in out-of-pocket expenses, etc. DMAIC process leading to improved process flows.
(8) Medical Device Company Project was Combining the two existing rejection systems used for tracking
defective materials. Results : The two systems were combined, streamlined, and placed on the web and
creation of Process flow for new process
Continue Reading
Previous
Follow on twitter
Category
Jobs (3)
News & Events (1)
Six Sigma (25)
Six Sigma Tools (17)
Six Sigma Training (35)
14 of 15 3/18/2011 12:01 AM
Six Sigma Tools | Six Sigma http://www.sixsigma.in/category/six-sigma-tools
Archives
February 2010
January 2010
October 2009
September 2009
Partner Links
Letters
Resumes
Six Sigma
15 of 15 3/18/2011 12:01 AM