Professional Documents
Culture Documents
Terminating Extron RG59/HR and RG6/ Terminating Extron MHR (26 AWG) and RC
SHR Cable with BNC connectors (24 AWG) Cable with BNC connectors
1. Push the compression 1. Slide the center conductor
connector onto the cable BNC Front
pin onto the center conductor.
Ring
until the center pin is flush
with the BNC front ring. 2. Place the plastic dielectric
Compression sleeve over the center Compression
2. Place the cable and connector Connector conductor pin. 4 Connector
in the opened compression
tool (no adapter necessary). 3. Slide the compression
sleeve over the dielectric
3. Compress the cable Center Pin sleeve as far as possible. Compression
and connector together, 3 Sleeve
as shown below (closed). 4. Place the compression
connector on the cable.
Plastic Dielectric
5. Place the cable and connector 2 Sleeve
Opened in the opened compression tool
(no adapter necessary). Center Conductor
SHR/HR Cable 1 Pin
6. Compress the cable and
connector together, as shown
below (closed).
Closed MHR/RC Cable
Terminating Extron RG59/HR and RG6/SHR Terminating Extron RG59/HR and RG6/SHR
Cable with F-type connectors Cable with RCA connectors
1. Push the compression 1. Place the center pin on the
connector onto the cable exposed conductor.
until the dielectric is flush with 2. Push the compression connector
the inner ring of the connector. onto the cable and pin until the 2 Compression
Compression
The center pin should stand out Connector pin protrudes past the top of the
Connector
slightly from the front ring. connector by approximately 1/4”.
Center Pin Center
2. Select and place the correct 1
3. Select and place the correct Pin
adapter into the compression adapter into the compression tool.
tool. Use the gold adapter for Dielectric
Use the gold adapter for gold
gold connectors and the silver connectors and the silver adapter
adapter for nickel connectors. for nickel connectors.
SHR/HR Cable
3. Place the cable and connector 4. Place the cable and connector in
in the opened compression tool. the opened compression tool.
4. Compress the cable SHR/HR Cable
5. Compress the cable and connector
and connector together, together, as shown on the other
as shown on the other side of this card (closed).
side of this card (closed).
CAUTION Using the wrong adapter can damage the tool. Continued on the other side.
Universal Compression Tool and Adapters
Compress connector.
Insert connector
into plunger.
Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan
1230 South Lewis Street Beeldschermweg 6C 135 Joo Seng Road, #04-01 Daisan DMJ Building 6F
Anaheim, CA 92805 3821 AH Amersfoort PM Industrial Building 3-9-1 Kudan Minami
USA The Netherlands Singapore 368363 Chiyoda-ku, Tokyo 102-0074 Japan 68-749-01 Rev. C
714.491.1500 +31.33.453.4040 +65.6383.4400 +81.3.3511.7655 Printed in the USA
www.extron.com Fax 714.491.1517 Fax +31.33.453.4050 Fax +65.6383.4664 Fax +81.3.3511.7656
10 03