Professional Documents
Culture Documents
All structural components in buildings included in this proposal are designed in accordance with
the following design codes as per AMERICAN STANDARD.
DESIGN CODES
Hot rolled sections and built up sections are designed in accordance with:
Manual of Steel Construction – Allowable Stress Design
American Institute of Steel Construction, Inc. (AISC)
1 East Wacker Drive, Suite 3100, Chicago, Illinois 60601-2001, USA
Phone: (001-312) 670-2400 • Fax: (001-312) 670-5403
Edition used in this project: 2005
BUILDING CODES
The buildings in this proposal are designed in accordance with the following building code:
ANNEXURE-2
All structural components in buildings included in this proposal are designed in accordance with
the following design codes as per INDIAN STANDARD.
DESIGN CODES
Hot rolled sections and built up sections are designed in accordance with:
Code for practice for general construction in steel – Limit State Design
Indian Standard – 800:2007 (IS: 800-2007)
Bureau of Indian Standards, Manak Bhavan,
9 Bahadur Shah Zafar Marg, New Delhi-110 002
Phone: 23235529; Fax: 011-23235529
Code of Practice for use of steel tubes in general building construction
Indian Standard – 806:1968 (IS: 806 -1968 (1st Rev))
Code of Practice for use of cold - formed light gauge steel structural members
Indian Standard – 801:1975 (IS: 801 -1975 (1st Rev))
Specification for covered electrodes for manual metal arc welding of carbon.
Indian Standard – 814:1991 (IS: 814 -1991 (5th Rev))
Code of procedure for inspection of welds
Indian Standard – 822:1970 (IS: 822 -1970)
BUILDING CODES