Professional Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: SPH237PN
www . quoizel . com
E Lock Washer 1 pc D
F Knob 1 pc E
J
G Fixture Chain 2 pcs F
H Ceiling Canopy 1 pc
G
I Shade 2 pcs
J Socket Collar 2 pcs
K Fixture Assembly 1 pc
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (2) 150W G40 medium Base bulbs .
● Helpful Tools (not included): Wire strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: SPH237PN
STEP 1:
Ceiling Canopy
a. Determine the hanging height you are desired. You
may need to spread the links open with pliers. Ceiling Loop
b. Attach one end of the Fixture Chain onto the Fixture
Loop on the top end of the Fixture Assembly and then
attach the another end of the Fixture Chain onto the
Ceiling Loop.
Fixture Chain
Fixture Loop
Fixture Assembly
STEP 2:
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws. Tighten until snug. Outlet Box
Crossbar
Outlet Box
Screw
STEP 3:
Pliers is required on this step.
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of Lock Washer
the Crossbar.
Crossbar
c. Using pliers, thread the Hex Nut against the Crossbar Hex Nut
and hand-tighten until snug.
Nipple
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: SPH237PN
STEP 4:
a. Locate the Ceiling Canopy onto the Crossbar and slip
the Button Stop on the end of the Lanyard into the Slot Slot
on the Crossbar as shown. Crossbar
Button Stop
Lanyard
Ceiling Canopy
STEP 5:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
STEP 6:
a. Pass the Ceiling Canopy over the end of the Nipple and
secure with the Knob. Hand-tighten until snug.
Nipple
Ceiling
Canopy
Knob
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: SPH237PN
STEP 7:
a. Place the Shade over the Socket as shown. Secure by
threading the Socket Collar onto the Socket. Hand-
tighten until snug.
Socket
Shade
Socket Collar
STEP 8:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
4 OF 4