Professional Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445
www . quoizel . com
6. Lift the CAGE upward and make the hole on the bottom
CEILING CANOPY
center over the NIPPLE underside of the SOCKET
assembly. Secure them together by threading FINIAL onto
the NIPPLE. Hand tighten until snug.
CANOPY LOCK RING
7. Thread the FIXTURE LOOP onto the nipple on the top
center of the FIXTURE HOOD. Hand tighten until snug.
FIXTURE SUPPLY
and GROUND WIRE
8. Fasten the CROSSBAR to the OUTLET BOX with
(2)OUTLET BOX SCREWS(not supplied). Proceed to
thread LOCK NUT A and LOCK WASHER A onto
the top end of NIPPLE. Thread NIPPLE into the center of
CROSSBAR. Locate the LOCK NUT B onto the bottom end
FIXTURE LOOP of the NIPPLE. Tighten LOCK NUT A against CROSSBAR
with plier until snug.
FINIAL 12. Restore power to the installation point ON. Retain this
sheet for future reference.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN! IS-MH1912
2007-09- 15