Professional Documents
Culture Documents
M:
A)
B)
C)
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 45 - 60 minutes
● Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &2, 60 Watt, Candelabra Base Bulbs.
● Helpful Tools (not included): Wire Strippers.
1 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER : REF8802BT
STEP 1:
a. Thread the end of the Stem onto the nipple on the top of
the Fixture Body . Hand tighten until snug.
Stem
Band B
Fixture
Body
Stem
Band B
Fig. 2 Band A
Front
Line up the View
Bars during
assembly. Bar
Bottom
View
Front View
Bar
Bottom
View
Band B
2 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER : REF8802BT
Outlet Box
Outlet Box Screw
STEP 4 :
* Use Wire Connectors ( not supplied ) to connect the wires .
WHITE WIRE WHITE OR RIBBED
a . Connect the House Ground Wire to the Fixture Ground
Wire. FROM HOUSE FROM FIXTURE
b . Connect the House White Wire to the Fixture Supply Wire
BLACK( OR RED) WIRE BLACK OR SMOOTH
( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and GROUND WIRE GROUND WIRE
carefully stuff all of the connected wires into the Outlet Box . FROM HOUSE FROM FIXTURE
STEP 5 :
a . Place the Backplate over the Mounting Screws and secure
with Mounting Balls. Hand tighten until snug. Mounting
Screw
Mounting
Ball
Crossbar
Backplate
STEP 6 :
a . Locate Candle Cover over Sockets as shown. Candle
Cover
Socket
3 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER : REF8802BT
STEP 7:
a. Begin with Bead String A and attach one end to the loop
on bottom ring of Band A.
Band A
b. Attach the other end of Bead String A to the loop on the
top ring of Band B that corresponds to the connection Loop
on bottom ring of Band A .
c. Attach one end of Bead String B to the loop on bottom
ring of Band B that is directly below connection of Bead
String A in above step .
d. Attach other end of Bead String B to the loop in top of
Band C that corresponds to connection in bottom of Bead String A
Band B .
e. Repeat this process by attaching one end of Bead String
A and B to every loop on Band A, Band B and Band C .
f. Attach Bead C to every loop on bottom of Band C . Band B
Loop
Loop
Loop
Band C
Bead String B
Bead C
STEP 8:
a . Install correct Bulbs referring to fixture markings and / or labels for maximum wattage .
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
4 OF 5
Photograph STYLE NUMBER : REF8802BT
5 OF 5