Professional Documents
Culture Documents
Contents
Integration Overview
The EasyCall Gateway has been certified for interoperability with Nortel
Communication Server 1000 version 5.0. This release of the EasyCall Gateway
supports QSIG trunks.
To enable the EasyCall Gateway to work with the Nortel system, you must configure
the telephony system trunk between the EasyCall Gateway and the Nortel system.
The integration described in this guide can be done in tandem with EasyCall Gateway
installation and configuration, which includes defining the properties of the telephony
system trunk and defining any changes the EasyCall Gateway makes to telephone
numbers before sending them to the telephony system for dialing. For information
about EasyCall Gateway configuration, refer to the EasyCall Gateway Administrator’s
Guide.
Those responsible for configuring the telephone system must take the specific
characteristics of a site into consideration to determine the appropriate settings.
Configuration of the Nortel telephone system for integration with the EasyCall Gateway
is similar to integration with a voicemail system.
The following topics describe how to configure trunks for the supported Nortel
systems.
“Nortel T1 QSIG Trunk Integration” on page 3
“Nortel E1 QSIG Trunk Integration” on page 13
2 EasyCall Gateway Telephony System Integrator’s Guide
Line Cards
A T1 Line Card must be available on the Nortel telephony system to connect to a T1
QSIG trunk.
OK
OK
2. A few seconds after both call legs of the click-to-call have connected, EasyCall
Gateway should be released from the call path and call should be bridged on the
telephony system.
12 EasyCall Gateway Telephony System Integrator’s Guide
C HAPTER 3
Line Cards
An E1 Line Card must be available on the Nortel telephony system to connect to an E1
QSIG trunk.
OK
Chapter 3 Nortel E1 QSIG Trunk Integration 19
OK
.
DCH: 10 EST CONFIRM TIME: 11:18:22 11/06/2008
2. A few seconds after both call legs of the click-to-call have connected, EasyCall
Gateway should be released from the call path and call should be bridged on the
telephony system.
22 EasyCall Gateway Telephony System Integrator’s Guide