You are on page 1of 66

Understanding Nikola Tesla’s Work.

By Konstantinos Pappas
konpappas@optusnet.com.au
Introduction:........................................................................................................................................ 2
The Wheelwork of the Universe – Cosmic Symphony ......................................................... 5
The Oscillating - Up and Down - motion of earth ............................................................. 7
Adding The Sun’s Motion to the Equation............................................................................ 8
The Sun’s Oscillatory - Up and Down - Motion ................................................................ 10
The Physics Behind The Helical Motion ............................................................................... 11
The Implications: Wheelwork Of The Universe................................................................ 14
Isaac’s Newton’s Gravitational Constant ....................................................................... 14
Tesla’s Possibility To Steer Earth Off Course ............................................................... 15
In Summary – The Wheelwork .............................................................................................. 17
Radiant Matter: By Sir William Crookes .................................................................................. 18
Figure 1: The Rotating Fly And the Dark Region ............................................................ 19
Figure 2: Phosphorescent Property of Radiant Matter .................................................. 20
Figure 15: Highly Exhausted Tube ....................................................................................... 21
Figure 16: Low Vacuum Tube ................................................................................................ 21
Figure 19: Heat Generated using Concave Shape Cups .............................................. 22
The Ether – Also Known As The Luminiferous Aether ....................................................... 23
Figure (i): The Electric Field ................................................................................................... 24
Figure (ii): The Magnetic Field ............................................................................................... 26
Figure (iii) The Two Parallel Plates Experiment ............................................................... 27
The Quantum World ................................................................................................................... 28
What Is Electricity?..................................................................................................................... 29
Image 1: Induction Coil ....................................................................................................... 29
Image 2: Tesla Coil ............................................................................................................... 29
What Is Light? .............................................................................................................................. 30
Image: Electromagnetic Radiation Propagation ......................................................... 31
What Is Gravity? ......................................................................................................................... 31
Region 1: The Ionosphere (+) Plate ............................................................................... 34
Region 2: Earth’s Atmosphere .......................................................................................... 35
Region: Earth’s Surface (-) Plate ..................................................................................... 36
Flaws In Our Current Understanding Of Physics ............................................................. 37
(i) The Electric And Magnetic Fields ................................................................................ 37
(ii) The True Definition Of The Vacuum ......................................................................... 37
The Ether - In Summary .......................................................................................................... 37
Understanding Tesla’s Magnifying Transmitter .................................................................... 38
The Important Colorado Springs Experiment................................................................... 41
The Earth And the Ionosphere System............................................................................... 47
Collecting Cosmic Energy .................................................................................................... 47
Applications Of The Magnifying Transmitter ..................................................................... 49
Tesla’s Flying Machine – The UFO ............................................................................................. 50
The Force on a Wire Experiment ........................................................................................... 51
Tesla’s Lecture ............................................................................................................................. 53
Tesla’s Lecture: Item # 7 ................................................................................................... 54
Tesla’s Lecture: Item # 8 ................................................................................................... 54
Sustained and Propelled entirely by Reaction .................................................................. 55
The UFO Shape – Analogy To Force On A Wire Experiment ....................................... 55
Tesla Clues On His Flying Machine ....................................................................................... 56
(a) Viscosity and Adhesion of Fluids – The Ether ...................................................... 56
(b) The Two Electrical Systems ........................................................................................ 57
Tesla Patent 723188 – Also known as the P2 System ...................................................... 59
Tesla’s Death Ray Machine .......................................................................................................... 64
A Simple Death Ray Machine.................................................................................................. 65
References: ........................................................................................................................................ 66

Page 1 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Introduction:

This man that you see before you is the greatest Inventor of all time – Nikola
Tesla. All he cared about was to advance our civilization and to make our “lives a
little easier”. He did not care about profit for he dedicated all of his money to
inventions, yet despite all attempts from capitalist money hungry animals to
hinder his efforts, this man lives on and will forever!

I myself share the ideals and visions of Tesla and it has become my passion and
obsession to continue his work and to enlighten you all on the deeper meaning
behind his inventions, so that you can benefit and advance in your line of work.

The items that I shall discuss in this presentation will provide you with a greater
understanding of Tesla’s Magnifying Transmitter and how it can be used to render
it a free energy device. For the Tesla Coil builders, you will benefit dearly from
this information.

I will also enlighten you on how a Tesla patent can be used to easily create a
flying machine as the man himself conceived the idea over 100 years ago. The
Tesla Coil builders may also benefit from this information as well.

I wanted to start off this presentation by referencing three quotes from Nikola
Tesla which at first I found quite extraordinary and ludicrous. However, as I
studied and meditated upon this great man’s work, the more I realized their
realistic possibilities and the more I came to the realization that he was not a
crazy inventor, as most novices have described him. He was a man far ahead of
his time and it will be my pleasure to enlighten you on these stupendous ideas:

Tesla Quote 1

“Throughout space there is energy. ... it is a mere question of time when men will
succeed in attaching their machinery to the very wheelwork of nature.”
- Nikola Tesla

Page 2 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Tesla Quote 2

“This planet, with all its appalling immensity, is to electric currents virtually no
more than a small metal ball.”
- Nikola Tesla

Tesla Quote 3

“When I found that I had been anticipated as to the flying machine, by men
working in a different field, I began to study the problem from other angles, to
regard it as a mechanical rather than an electrical problem. I felt certain there
must be some means of obtaining power that was better than any now in
use. And by vigorous use of my gray matter for a number of years, I grasped the
possibilities of the principle of the viscosity and adhesion of fluids and conceived
the mechanism of my engine. Now that I have it, my next step will be the
perfect flying machine.”
- Nikola Tesla

These three comments laid the foundation to study Nikola Tesla’s work and to
pursue my quest in the field of free energy and UFOs for the benefit all humanity.

Whether you believe these to be true or not, I do not want to break the news to
you, but we are already harnessing the wheelwork of the universe with our
machinery today and we are not even aware of it.

Every time you turn on a light globe, or every time you are turning on the
computer, walking down the street, or driving the car, you are harnessing the
wheelwork of the universe. What’s more, not only are you are paying for it dearly,
we are all polluting this planet as well.

If you are truly Nikola Tesla fans, enthusiasts, or even devotees, the time has
come for us to stand up and fulfill Tesla’s vision. A world of free energy…. A world
of flying machines…

Items of interest for the experimenter, the inventor and the investor, this
presentation will include the following:

1. How you can create a flying machine - UFO - using anti-gravity technology
created with the work of Nikola Tesla;
2. How you can gear all vehicles on this planet to the very wheelwork of the
universe, disposing of the need for batteries;
3. How you can create unlimited amounts of Green Energy for all on this
planet cheaply, disposing of all the ugly power-lines on the globe;
4. How you can create the death ray machine

Now, what must be acknowledged here is what I present here is sound and can
be proven using our laws of physics. Because I will present this information from
a physics background, it will require a translation into the Electrical Engineering
art to achieve what I present here.

Now, I do not intend to profit from giving you this information or hide any secrets
from you. I give the information freely and like Tesla, my intention is to make
your lives a little easier. I do this in the name of Tesla! Should you be interested
to create a team of engineers, invest in new ideas and collaborate, I am ready for
you.

Page 3 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Note that I do not intend to cover any conspiracy theories, or give you
assumptions, nor any false information and no hidden messages. I strongly
believe that the information I present here is as the man Tesla understood it.

Before I delve into Nikola Tesla topics of interest, it is of utmost importance for
me to begin this presentation on ‘The Wheelwork Of The Universe’, because as
you shall see, understanding this will serve to enlighten you in ways you have not
imagined.

Page 4 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

The Wheelwork of the Universe – Cosmic Symphony

When Nikola Tesla spoke of man gearing their machinery to the very wheelwork
of the universe, I was quite intrigued by this because I thought that this would
serve as the man’s ultimate achievement.

Imagine that you could simply turn on an electrical device and it would run
forever without the need for a battery. Imagine an AC motor in power stations
running forever without the need for coal mining. Imagine the electrical cars of
the world not running on batteries. All made possible by simply gearing these
cars or electrical devices to the very wheel work of the universe, whose source is
at the very centre of the cosmos.

Although these ideas may appear impossible to achieve and beyond your
comprehension, harnessing the wheelwork of the universe is actually elegant and
possible, and simple I might add. The key is in understanding what that
wheelwork is. When you understand what it is, then you will see what Tesla was
talking about.

So, exactly what is the definition of the wheelwork of the universe? How can you
harness this power for the benefit of mankind?

You may not be aware of this, it turns out that you are already harnessing this
power. Your physical body is geared to this wheelwork and you don’t even know it.
Every time you walk, sleep, wake up to the rising sun, turn on a light bulb, you
are harnessing the wheelwork of the universe, and paying dearly for it with your
health and at the expense of mother earth.

This topic has far reaching implications that is beyond your imagination and you
will realize the true nature of how the universe works and though seemingly

Page 5 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
affected only by your immediate surroundings, the sphere of external influence
extends to infinite distance, as Tesla elegantly described.

Although we have an in depth understanding of how stars behave and how


planets orbit through space, despite the tons upon tons of books written on this
topic, I believe there is something missing and must be discussed.

It is worthy discussing how planets and stars orbit in the universe because
although they are light years away, they have a direct influence in our lives and
they play a vital role in achieving ‘free’ energy and anti-gravity.

Although we may understand that planets follow a ‘curvy’ path in their motion
through space, it is the mechanics of this motion that I wanted to understand.

First, lets begin with our planet earth. We have all been taught in school that the
earth obits the sun in circular or an elliptical orbit as shown:

We have also been taught that the gravitational pull of the sun keeps earth in its
orbit. This may hold true, however, I could not accept this idea. As per Einstein’s
general theory of relativity, the idea that the sun’s gravity curves space and
forces the planets to orbit was ludicrous. Even Tesla himself opposed the theory
and described it as follows:

“A magnificent mathematical garb which fascinates, dazzles and makes people


blind to the underlying errors. The theory is like a beggar clothed in purple whom
ignorant people take for a king ... its exponents are brilliant men but they are
metaphysicists rather than scientists”

While I was thinking about this, I knew that there was something missing
because the sun is moving through space at phenomenal speeds as well.
Mechanically, and from the laws of physics, the earth cannot just stay in orbit
about the sun in the elliptical fashion with gravitational forces alone. If the sun
were stationary, the earth would simply drift towards the sun.

I wanted to find out the true motion of the earth through the universe. The
current understanding of the earth orbiting about the sun in an ‘elliptical’ may
hold true if the sun is stationary, but it is not. The sun is moving at phenomenal
speeds.

Let’s put this into perspective. The earth is rotating about its own axis at
approximately 1,666 km/h (1041.25 mph).

Page 6 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
The earth is also orbiting the sun on that ‘elliptical’ path at approximately
107,000 km/h (66,875 mph). What’s more, the Sun is moving through space at
approximately 792,000 km/h (495,000 mph) and to add another piece of detail
that is highly ignored by the scientific community is that the centre of our Milky
Way galaxy is moving through space at approximately 2,000,000 km/h
(1,250,000 mph). That is 552 km/s (345 miles per second). Note also that the
distance from the sun is approximately 150,000,000 km.

Now, I want you sit back and just absorb this information and think about the
implications. Although we fall oblivious to these great speeds, we are no doubt
moving with the universe at these great speeds. You cannot avoid it.

Here we are looking for ways to improve communications on this planet, looking
for ways to create more powerful Tesla Coils or Magnifying Transmitters, more
efficient AC motors, more efficient batteries to run our electrical cars by using
energy that is dormant, second hand and pre historic, and also we are trying to
improve ways to get more money from people from smarter billing systems is the
goof of all time!

And we cannot harness power from the universe? For what? Money?

OK, you may be asking how we can harness this wheelwork of the universe. So
far, I have only shown you half the picture. Let’s drill more into this because it
will become apparent and you will understand it.

I stated earlier I wanted to find the true path of the planets and the stars,
including our own sun. So, what I did was I began to trace the path of earth
about the sun as per our laws of physics. What I found when you take into
account the sun’s motion, and the earth’s orbit about the sun (lets ignore earth’s
spin for now), the earth’s true path is a helical sine wave motion.

The earth’s North Pole is at the forefront of the earth’s path in the universe and
the South Pole is its tail end. When you look at the earth’s path from the side
view, it looks like a sine wave, but when you look at earth’s path as a whole, it
follows this helical path. And, when you look at earth from the bottom view, it
follows that elliptical/circular orbit that we have been taught in school.
Nonetheless, earth’s true path through the universe is that helical path.

Now, here is the interesting part. This is the helical path that the earth’s centre
follows about the sun. This helical path that the earth follows has an up and down
motion, as well as the forward motion due to the sun’s movement through space.

What must be acknowledged here is although we may know that planets


generally follow a ‘wavy’ path in their motion through space, it is the
laws of physics governing their path that is important, and this will be
discussed in more detail shortly.

The Oscillating - Up and Down - motion of earth


Let’s first look at the up and down motion. This up and down motion is also
referred to oscillation in physics. Earth’s centre is actually oscillating about the
sun. Every time the earth completes one oscillation, this is equivalent to the
yearly cycle of 365 days. You will also find it enlightening that the amplitude of
this oscillation is equivalent to the distance of the earth from the sun,
approximately 150,000,000 km.

Page 7 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Now, get ready for this…. The orbital speed that we have been taught from school
of 107,000 km/h (66,875 mph) that the earth supposedly moves in an elliptical
manner is in fact the oscillatory speed of the earth. That is, this orbital speed of
107,000 km/h (66,875 mph) is in fact the up and down speed that the earth
moves through space in this wheel work of the universe! Here is a diagram to
illustrate this point:

I reiterate. In our current understanding of the earth orbiting the sun in an


elliptical/circular manner is in fact earth’s oscillation about the sun. This alone
nullifies Kepler’s laws of motion. An illustration of this helical motion will follow
shortly.

Adding The Sun’s Motion to the Equation


Now, let’s complicate things a little and take into account the motion of the sun
(the forward motion).

While you have the up and down (oscillating) motion of the earth, and you take
into account the motion of the sun about the Milky Way galaxy, this will give you
the complete sine-wave, helical motion that the earth propagates through space.
I highlighted earlier that the speed of the up and down motion (oscillation) of the
earth is 107,000 km/h (66,875 mph). Note, the earth is oscillating at this speed
with amplitude of 150,000,000 km. The sun is moving at approximately 792,000
km/h (495,000 mph) and the earth is moving with it, which completes the helical
motion. Refer to this illustration:

Page 8 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

When you take these combined forces and speeds acting on the centre of the
earth, this will yield the following motion of the earth*:
(*Here, I have found a picture on Google that best describes this motion)

Page 9 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
The Sun’s Oscillatory - Up and Down - Motion
Thus far, I have only discussed the helical motion the earth follows through space.
While I thought deeply on this matter, I discovered that just as the earth
oscillates about the sun, the sun, too, oscillates about the centre of the Milky Way
galaxy.

This is profound! Just think about this for the moment. The entire Solar System,
the entire galactic system is a series of interlocking helical motions! While the
earth’s centre follows this helical path about the sun, the sun follows this helical
path about the Milky Way galaxy, but on a larger scale.

To put this into perspective, the sun’s oscillates up and down about the Milky Way
galaxy at a speed of 792,000 km/h (495,000 mph). At the same time, the sun is
moving with the center of the Milky Way galaxy at approximately 2,000,000 km/h
(1,250,000 mph). What’s more, the amplitude at which the sun oscillates about
the Milky Way galaxy’s core is approximately 2.5 x 1017 km. This is also the
distance the sun is from the Milky Way Galaxy core.

Refer to this illustration:

Ladies and Gentlemen, I am no artist, but my imagination has served me well.


This is the mechanics of the Universe. It is a series of interlocking helical motions.
The inner heavenly bodies determine the path of the outer heavenly bodies.

For example, the core of the Milky Way galaxy determines the helical path of the
sun. The sun then determines the helical path that its planets take, and if you
want to take it one step further, the planets then determine the helical path of
their moons.

Page 10 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
To put this into perspective, the earth’s centre follows that helical path about the
sun as illustrated above. Now, while the sun follows that same helical path about
the Milky Way galaxy’s core, this creates a series of interlocking helical motions.
So, as I have illustrated here with the orange line, this orange line is part of the
helical path the sun takes about the Milky Way galaxy’s core, and the white
dotted line is the helical path earth takes about the sun’s helical path. To
complicate things a little, because the earth spins (or orbits about its own axis) at
a speed of 1,666 km/h (1041.25 mph), this creates another helical path about
the dotted line as shown in this illustration.

The Helical, Sine-Wave Motion:

This is what is known as the Wheelwork of the Universe… It is a series of


interlocking helical motions of planets and stars. This is the ultimate Cosmic
Symphony.

The Physics Behind The Helical Motion

When Tesla was referring to the earth as nothing more than a ‘small metal ball’
he knew something about the wheelwork of the universe. While earth follows the

Page 11 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
series of Interlocking helical motions that stem from the centre of the Cosmos,
earth is moving through space at such a phenomenal speed, that earth behaves
like an electrical current, all the while spinning ferociously and creating rotating
magnetic fields.

In effect, earth is indeed a huge metal sphere which behaves like an electrical
machine and is geared to the wheelwork of the universe.

Now, there is something that I learned in Physics and I found a direct relevance
to the forces that keep the heavenly bodies in their helical path through space.
The force I refer to is Centripetal Force. This is the mechanics that keeps the
heavenly bodies in their helical path.

Despite what has been taught by the great scientists of the world – including
Isaac Newton and Albert Einstein – it is mechanically impossible for the planets to
obey their laws of motion. Granted, there is a gravitational force that keeps
planets orbiting about their suns, however, as you shall see in a moment, this
gravitational force is equivalent to the centripetal force.

Now, the formula for the centripetal force is as follows:

In this example, I will use the earth and sun system:

- m is the mass of the earth = 5.9736 x 1024 kg (approximately)


- v is the orbital speed of the earth = 107,000 km/h (66,875 mph)
- r is the amplitude of earth’s oscillation which is also equal to earth’s distance
from the sun = 150,000,000 km.

I decided to use this physics and do some mathematical calculations to see if my


muse on this helical path was leading me into the right direction. Then, one day,
it came to me. I thought of Isaac Newton’s famous formula:

Now, let’s consider this for a moment for the earth and sun system.

- G is gravitational constant = 6.67428 x 10-11 m3 kg-1 s-2


- m is the mass of the earth = 5.9736 x 1024 kg (approximately)
- m1 is mass of the sun = 1.9891 x 1030 kg (approximately)
- r is the distance of the earth from the sun = 150,000,000 km.

Now, while I thought about this, I began to realize that while Newton’s famous
formula is true, and it describes the forces that hold the earth and the sun
together, this force had to be centripetal in nature. So, I decided to do some
calculations and put it to the test.

Page 12 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

I thought that these forces had to be equal, i.e.,

If you do some mathematical algebra, this formula becomes:

The reason why I did this was because I wanted to see if I linked the centripetal
force with Isaac Newton’s formula, I should get the correct value for ‘v’ which is
earth’s orbital speed about the sun, namely, 107,000 km/h (66,875 mph).

If you apply some mathematics, and using the values of ‘G’, ‘m1’ and ‘r’ I have
provided above, you will get a value of ‘v ‘ as follows: (note to use the correct SI
units)

V = (6.67428 x 10-11 m3 kg-1 s-2 x 1.9891 x 1030 kg / 1.5 x 1011 m)1/2

This will yield a value of 2.9749 x 104 m/s (meters per second)

A conversion from m/s to km/h of (1/1000 multiplied by 3600) will yield a value
of v = 10.7099 x 104 which is also equal to 107,099 km/h which is the correct
value provided by the scientific community.

I was absolutely over the hill with this. Not only were my muses correct about
this helical path of the planets and the stars, but I provide it with simple
mathematics and proved it using Isaac Newton’s theory of gravitation.

The Universe is truly a COSMIC SYMPHONY that is governed by a series of


interlocking helical motions. Every single planet, star, galaxy are oscillating with
each other, producing a series of HARMONIC tunes.

So, if you want to harness this great power of the cosmos with the wheelwork of
the universe, harmonics, and resonance are the key.

Now do you see why Tesla’s earthquake machine worked and why? He harnessed
the wheelwork of the universe and created a mini earthquake. Even Tesla’s AC
system was superior to Thomas Edison’s DC systems because AC resonates with
the cosmos.

And, above all, our link to this very wheel work of the universe is through the
EARTH’S CENTRE.

Page 13 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
The Implications: Wheelwork Of The Universe

Isaac’s Newton’s Gravitational Constant


Suppose we did not know the value of Isaac’s Newton’s Gravitational constant (G)
and we wanted to find out what was its value. Using the relationship I have
introduced you:

Rearranging this formula will yield the following formula for G:

In the earth and sun example,

- m1 is mass of the sun = 1.9891 x 1030 kg (approximately)


- v is the orbital speed of the earth = 107,000 km/h (66,875 mph)
- r is the amplitude of earth’s oscillation which is also equal to earth’s distance
from the sun = 150,000,000 km.

Applying mathematics, we get (note to use the correct SI units):

G = (29722.22 m/s) x (29722.22 m/s) x (1.5 x 1011 m)/ (1.9891 x 1030 kg)

This will yield a value for G as follows:

G = 6.68681x 10-11 m3 s-2 kg-1


Even the units are correct m3 s-2 kg-1

What is this telling us?

First, I can tell you for certain that there is a link to π - from the m3 unit - and is
linked to volume since the unit of measure for volume is m3.

Second, Isaac Newton’s law of Universal Gravitation does not describe the forces
acting between planets and stars that hold them together, but rather it describes
the centripetal forces that planets are bound by their suns.

Furthermore, the spin of all planets and stars about their own axis is intrinsically
connected to this centripetal force that all heavenly bodies are bound by – planets,
stars, galaxies and universes.

Page 14 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Tesla’s Possibility To Steer Earth Off Course

The implications of the wheelwork of the universe are phenomenal. From free or
green energy, to the possibility of even changing the course of earth. Nikola Tesla
spoke of the possibility of changing the course of earth’s path in his days. While
most people thought he was crazy, in fact Tesla knew about the wheelwork of the
universe, but he refrained from revealing it to the public for certain reason. He
referred to this theory as the Dynamic Theory of Gravity. As you can see from the
wheelwork of the universe I have presented here, the universe is dynamic and it
is not as ‘static’ Einstein theorized.

Now, the centripetal force I have presented here as

Equation (1)

also holds true with electrical point charges at the quantum level.

The centripetal forces of say an electron orbiting the nucleus of an atom is also
given by this formula:

Equation (2)

where
- Q = the electrical charge of the electron
- V = the orbital velocity of the electron
- B = is the magnetic field of the electron

Now, because the earth follows the helical, sine-wave motion in its path around
the sun, and by virtue of the fact that the earth exhibits strong electrical currents
at the center of the earth which create the rotating magnetic field – due to
earth’s orbital spin about its own axis - it cannot be ignored that the earth
behaves like a huge ball of conductor.

That’s not all.

The mechanics of the earth’s path about the sun demands that the laws of
physics it obeys are defined by centripetal forces, and not as defined by Isaac
Newton or Albert Einstein.

So, Equation (2) can be extrapolated to the scale of the earth and the sun system.

Note also that Equations (1) and (2) are equal.

Page 15 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Hence,

In this case,
- Q is the total charge of the earth
- V is the orbital velocity of the earth about the sun
- B is the magnetic field of the earth
- r = the distance of earth from the sun
- m = mass of the earth

Now, I will re arrange this formula as follows:

Now, I want you to think about this and its implications. Now, as Tesla stated,
earth is nothing more than a metal ball of sphere.

Suppose what happens to this formula when either Q or B increases? The value of
r decreases.

What does this mean? It means that as the magnetic field or the charge of the
earth is increased, the distance of the earth from the sun decreases. Think of this
stupendous idea. Here we are worried about climate change and global warming
and blaming it on carbon emissions. Though these carbon emissions do play a
role in global warming, I believe the problem is much worse. I believe with all the
tons upon tons upon tons of cables we have laid on this planet to transmit
electricity, and the associated magnetic fields they create, and with the increased
electrical activity of the earth due to increased electricity consumption, this has
actually increased the charge and magnetic field of the earth (the Q and B values
in the above formula).

What we have actually done is in effect decreased the earth’s distance from the
sun. Although this may seem beyond your imagination, when you consider the
wheelwork of the universe, we are actually drifting towards the sun, slowly but
surely.

In a following topic on the Magnifying Transmitter, I will provide information on


how we can actually alter earth’s cosmic path and extract energy from the
cosmos in unlimited amounts at free will, just as Tesla said himself.

Page 16 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

In Summary – The Wheelwork


• The force which gives earth’s oscillatory motion about the sun and defines
its circular path about the sun is centripetal in nature.
• The force which completes earth’s sine-wave, helical path about the sun is
equal to the sun’s centripetal force about the Milky Way galaxy.

Where:
m(s) – mass of the sun: 1.9891 x 1030 kg
v(s) – orbital speed of the sun about the Milky Way galaxy: 2.20 x 105 m/s
r(g) – mean distance the sun is from the Milky Way core: ~ 2.5 x 1020 m

• While a point on the earth’s equator follows the helical, sine-wave path, it
does so about earth’s centre about the sun. At the same time, the sun also
follows the helical, sine-wave path about its centre about the Milky Way
galaxy.

• Earth’s centre follows the helical, sine-wave path and the sun’s centre
follows the helical, sine-wave path about the Milky Way galaxy.

• Due to the sun’s helical, sine-wave motion about the Milky Way galaxy,
this actually defines earth’s yearly cycle.

Page 17 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Radiant Matter: By Sir William Crookes

While I was studying Nikola Tesla’s work, I really wanted to get into his mind and
understand what he was talking about. It was one thing to just read his work,
and another thing to understand what he was talking about. I can tell you for
sure that he was not crazy and at the time, although his ideas were far ahead
even for the scientists that belonged to the Royal Society, he was talking about
principles whose laws abided by Physics.

Now, while I was studying Tesla’s address before the American Institute of
Electrical Engineers, (AIEE) in London, where he presented experiments with
alternating currents of high potential and high frequency, there was something
Tesla said I found interesting. In his introduction, he was boasting about a book
he had read as a student that changed the course of his life. This book influenced
Tesla to study the world of Electricity and Magnetism. Tesla said that this book
motivated him to study Electrical Engineering and served as the spark that
advanced his ideas and his inventions.

I wanted to really get inside Tesla’s mind and find out what he was thinking at
the time. Deeply curious by this, I bought this book, studied it, meditated upon it,
and found some interesting information which I shall present to you here. This
information will startle you and you will soon see how this book actually led to
Tesla’s later inventions of the Magnifying Transmitter, the flying machine – UFO -
the death ray machine, and others.

This book I refer to is “Radiant Matter, by Sir William Crookes.”

Sir Crookes’ work on the topic of Radiant Matter was quite an eye opener. I
began to see what Tesla was actually thinking at the time. For me this was
rewarding and enlightening because this was one of my goals to get into that
great mind of Tesla.

Basically, Sir Crookes explored the fourth state of matter called Radiant Matter,
previously studied by Michael Faraday. Sir Crookes performed experiments using
high vacuum tubes by applying currents of high potential and high frequency, and
these vacuum tubes phosphoresced and exhibited other properties worthy noting
that will be of interest and benefit to the inventor, the experimenter, the
enthusiast, or even the investor.

First, let’s begin with the following simple experiment by Sir Crookes:

Page 18 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Figure 1: The Rotating Fly And the Dark Region

Here, Sir Crookes applies the induction coil to this vacuum tube with the positive
poles at each end and the middle pole made negative. While the discharge from
the induction coils is passing through the tube, Sir Crookes noticed there was a
region of dark space around the negative pole as shown this illustration.

Sir Crookes also noticed that if the vacuum tube was highly exhausted, i.e., the
higher the vacuum, the larger the dark region around the negative pole was. And,
if the tube had low exhaustion, this dark region around the negative pole in the
middle decreased in distance.

What’s more, when Sir Crookes applied the exhaustion in the vacuum tube to the
highest degree, the dark space extended to the edges of the tube.

Sir Crookes expanded this experiment by placing a rotating fly within this tube
and noticed that the fly would rotate at the boundary of the dark and white space.
If the rotating fly was either within or outside of the dark space, the fly would not
rotate.

I began to question what this dark region was. The more I thought about it, the
more I understood its significance that served to advance Tesla’s understanding
of electricity and magnetism, which later led to Tesla’s invention of the
Magnifying Transmitter.

Bear this in mind for the moment because I will reveal its significance shortly.

To the next experiment:

Page 19 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Figure 2: Phosphorescent Property of Radiant Matter

Here Sir Crookes explored the property of Radiant Matter further and observed
how glass exhibited powerful phosphorescent properties when the Radiant Matter
stroked the edge of the glass. Also, the color of phosphorescence varied from
blue to green depending on the type of glass used and the strength of the
induction coil applied.

Do you know of any similar natural phenomena on earth? This can be likened to
Aurora Borealis as shown here:

Page 20 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Figure 15: Highly Exhausted Tube

Here, Sir Crookes was using a highly exhausted tube with the negative and
positive poles at each end. When he turned on the induction coil, he observed the
stream of Radian Matter darting from the negative to the positive poles – left to
right. He then placed a horse shoe magnet and observed how the Radiant Matter
was curved. As he waved the magnet, the Radiant Matter followed the magnet
like a magic wand.

Figure 16: Low Vacuum Tube

Here, Sir Crookes used a similar tube, only this time the tube had low exhaustion.
The stream of Radian Matter darted from left to right. Notice how this time he
used a powerful electromagnet and this time the stream of Radiant Matter
curved only temporarily. This is profound.

Whereas, in Figure 15, Sir Crookes was using a highly exhausted tube and he was
able to manipulate the stream of Radiant Matter with a powerful magnet.

Page 21 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Figure 19: Heat Generated using Concave Shape Cups

Sir Crookes also demonstrated how Radiant Matter produced heat when the glass
tube phosphoresced. Now, more importantly, this heat was intensified when he
used a cup-shaped negative pole and focused all of the Radiant Matter to a focal
point as shown in this diagram – The tube on the left.

Note that this is akin to focusing sun light using a concave lens. Furthermore,
with the application of a magnet, he could move the focal point, and even melt
the glass! – The tube on the right.

So, what Tesla has done is taken these ideas and created similar experiments on
the scale of earth! This later served as Tesla’s inspiration for the Death Ray
machine – more on this later.

Page 22 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

The Ether – Also Known As The Luminiferous Aether


What is The Ether? According to history, there have been many attempts by the
scientific community to describe it, to prove it and to disprove it. There have even
been attempts made to shadow its existence and to rename it in order to conceal
its great power. Such names you may be familiar and they include ‘Plasma’,
‘fabric of space’ or ‘empty space’.

It is immaterial whether you believe in the ether or not. Totally oblivious, you
are all enslaving this powerful medium to harness power using your instruments
which include conductors and magnets. Shortly, I will provide Tesla’s description
of the ether and how he managed to harness the ether’s power in his
experiments.

As I illustrated earlier in Figure 1: The Rotating Fly And the Dark Region on the
topic of Radiant Matter, the dark region around the negative pole explored by Sir
Crookes was in fact the creation of a true vacuum. I shall use this analogy to
assist in your understanding:

Imagine the water in sea. This is the medium that fills the ocean. The ocean is
the medium in which electromagnetic waves propagate at the speed of light. The
electromagnetic waves need a medium to propagate in and that is of the ether.
The ether has is so dense and so fine that the only way you can access this
medium is through application of electrical currents of high potential and high
frequency.

Now, imagine that water in the ocean is displaced radially outward and leaves an
empty sphere of nothingness. This is a region of nothingness where nothing, not
even light can pass through. This is a true vacuum and the true meaning of a
vacuum I refer to is displaced ether. And, the ether can be displaced by using
powerful Electric and Magnetic Fields.

Just like you need water for water waves to propagate, a medium must exist in
order for electromagnetic radiation to propagate. The speed at which light
propagates and the frequency reveals the hidden power that lies within the ether
and its properties. One such property of interest in our line of work is its density.

According to history, the calculated density of the ether is

1093 grams per cubic centimeter*

* This number is also known in the scientific community as the vacuum density.

If you want to proof that the ether exists, you don’t need to study Albert
Einstein’s General Theory of Relativity, or the art of optics. Two simple scientific
phenomena will serve to illustrate:

Page 23 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Figure (i): The Electric Field

The electric fields created by point charges – electrons or protons - clearly


indicate that the point charges have affected the surrounding medium. The
definition of the electric field, according to ‘Ohanian Physics’, second edition, is as
follows:

“An electrically charged body generates an electric field which permeates the
(apparent) empty space around the charged body and exerts pushes or pulls
whenever it comes in contact with another charged body”.

What is important to note is the effect the charged body has in the surrounding
space, which is ‘apparently’ empty.

If the space is empty – for example, as per Albert Einstein’s theories – how can
electrically charged bodies create electric fields?

How ludicrous is that! You need to have some medium surrounding the charged
bodies in order for them to create an electric field!

Side Question:
Have you seen those UFOs in the media that make 90 degree turns and they
seem to be floating within a medium? The only way they can do this is by
harnessing the medium with which they are immersed, and that is of the ether.

And this medium was elegantly described by Nikola Tesla in a lecture before the
American Institute of Electrical Engineers in London. Here is an excerpt of the
Lecture:

(Note that this is an excerpt of the lecture that Tesla explicitly referred to in his
autobiography that described the workings of his flying machine. This will be
discussed in more detail later).

Page 24 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Based on Tesla’s description of the medium filling all space – the ether – it clearly
describes a similar structure to the structure of electrons and protons, however,
the main difference is that the ether is much more fine and dense and that the
ether penetrates all matter. Refer to this illustration for a depiction of Tesla’s
description of the ether:

From Tesla’s description, you can infer the structure of the medium – or
supposedly the empty space. Simply, that the ‘independent carriers’ are
influenced by the charged bodies and the direction that they displaced within the
‘insulating fluid’ creates the electric field.

I have been pondering on Tesla’s description of the ether for quite a long time,
and I have derived at the following conclusion:

The ‘independent carriers’ possess a net positive charge, and the ‘insulating fluid’
is neutral. What’s more, the displacement of the ‘independent carriers’ create
what we know as the Electric Field lines.

While the ‘independent carriers’ are displaced – by electrically charged bodies -


the ether particle will attempt to re establish equilibrium. In doing so, the
‘insulating medium’ will also be displaced in an effort to maintain equilibrium. The
displacement of the ‘insulating fluid’ creates the Magnetic Field lines and this is
where we can harness the power of the ether whose density is 1093 grams per
cubic centimeter and whose electromagnetic forces are 1040 more stronger than
the gravitational forces… through the displacement of the ether particles.

Given that the ‘independent carriers’ are displaced towards a negatively charged
particle, this indicates that the ‘independent carriers’ possess a positive charge
since they are attracted to opposite charge. Hence, this creates the Electric Field
of a negatively charged particle as shown in Figure (i) above.

Likewise, the ‘independent carriers’ are displaced away from a positively charged
particle, since like charges repel. Hence, this creates the Electric Field of a
positively charged particle as shown in Figure (i) above.

By comparison, the ether particle is much denser and much finer than electrons
and protons. If we were to compare the size of the ether to the electron, the
basic ether particle would be a grain of sand and the electron would be the sun.

Page 25 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Figure (ii): The Magnetic Field

Another phenomenon known to mankind that enunciates the existence of the


ether: The Magnetic Field lines. The magnetic field created around a magnet
clearly shows that the surrounding medium is elegantly influenced by the internal
structure of the magnet, and it is as though a ‘fluid’ medium has been influenced
by the magnet and creates the field lines.

It is important to note that it is not the internal structure of magnets which give
their magnetic property that produce the magnetic filed lines. Rather, it is the
effect of the internal structure of the magnet that has on the surrounding medium.
Furthermore, the direction of the magnetic field lines reveal the hidden structure
of the ether and it aligns with Nikola Tesla’s description of the medium filling all
space – The Ether.

It is important to note here that what we forget to acknowledge in all Electric and
Magnetic field phenomena created by either electrical currents in a wire or in
magnets, is that they are all bound by the wheelwork of the universe as I have
described earlier and that they are moving at phenomenal speeds through space.

Given that displaced ‘independent carriers’ create the Electric Field, the displaced
‘insulating fluid’ creates what we perceive as the Magnetic Field. The direction
that the insulating fluid’ is displaced also stipulates the direction of the magnetic
field of magnets and the earth.

This new understanding of Tesla’s description of the basic ether particle can be
verified with one simple experiment:

 Try pushing two magnets together as close as you can with the two south
poles facing each other. Obviously, two like poles will repel, but what we
must perceive is that as the magnets repel, you can feel that there is
some rigid medium between them like a flexible solid. Although we have
been led to believe that two like poles of magnets will repel, we must
acknowledge that it is the effect the two like poles of the magnets have
on the ether that is creating that repulsion. This repulsion is the result of
the ‘insulating fluid’ around the like poles repelling each other.

Page 26 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Figure (iii) The Two Parallel Plates Experiment
While I was studying Nikola Tesla’s work, in particular his address before the
American Institute of Electrical Engineers, I noticed that he made several
references to the effects his apparatus had to the surrounding medium.

While Tesla was experimenting with alternating currents of high potential and
high frequency, he had discovered that a ‘gaseous medium’, which surrounded
the conductors, became rigid when it was impressed by rapid changes of
electrostatic potential.

This was a profound discovery.

To illustrate this, refer to this experiment Tesla had performed:

With this experiment, not only had Tesla proved the existence of the ether, but
he also proved that the ether was akin to a fluid which possessed rigidity and
elasticity. So the ether could be stretched and compressed like a rubber band
through the application of currents of high potential and high frequency.

In the above diagram, I have indicated that between a (-) negatively charged
plate and a (+) positively charged plate, an electric field is created and the
direction of the field is from the positive plate to the negative plate.

This electric field clearly shows that the gaseous medium – the ether – between
the plates, there is some ‘stretching’ phenomena taking place on the ether and
the ether is stretched in the direction as shown.

As per Tesla’s description of the basic ether particle, the displacement of the
‘independent carriers’ from the positive to the negative plate indicates that they
are indeed repelled from the positive plate to the negative plate.

Page 27 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Now, if you impress the medium between the charged plates with rapid changes
of electrostatic potential, compression – or rigidity – of the ether would result
because this would create rapidly changing Electric Fields, and in turn ‘solidify’
the ether between the plates.

The action of rapid creation and collapse of the Electric Field between the parallel
plates would create a medium of rigidity between the plates.

The Quantum World


At the very quantum level of the atomic world, the empty space between atoms
and electrons is so vast, that it is akin to distance between earth and the sun.

With the billions of atoms and electrons that exist in matter, it is ludicrous to
believe that space is ‘empty’ between them. Had this been the case, all matter
would collapse on itself. There must be a medium so strong and so dense as to
overcome the strong nuclear force that it would prevent even the collapse of
the orbiting electrons to the protons in the nucleus of an atom.

If we were to compare the size of the ether particle to the electron, the basic
ether particle would be a grain of sand and the electron would be the sun. I
reiterate… The supposedly ‘empty space’ has a density of

1093 grams per cubic centimeter

If we were to delve deep into the structure of say Aluminium at the quantum
level, and observe the vast space that exists between electrons and the
protons/neutrons, and compare the densities between Aluminium and the ether
which inter-penetrates the molecular structure of Aluminium, this will give you an
idea of the power that lies within the ether, the vital ingredient that has been
missed when looking for energy.

The density of Aluminium is 2.70 grams per cubic centimeter.

The density of the Ether is 1093 grams per cubic centimeter.

With this stupendous difference in densities in mind, it is abundantly crystal clear


that we have missed the point! Here we are using exothermic reactions, burning
fuel to power cars and rockets, burning coal to create electricity, all the while
polluting the planet. Instead of using the vast power that lies within the ether, we
are certainly not creating efficient means to extract power from matter.

It is also abundantly clear that clean energies can be extracted from the Ether
efficiently and in abundant amounts as Tesla prescribed.

In summary, this is another way of viewing the ether that will help you
understand:

If you extended your consciousness to the very end of the cosmos and viewed
the entire cosmos as a whole, the ether – empty space that lies between the
stars and planets - would be likened to matter, which is stationary, and which
inter penetrates all matter within – including the planets and the stars.

Page 28 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

What Is Electricity?
Here, I have provided two images that illustrate the marvelous beauty the ether
possesses. The induction coil and the Tesla coil.

Image 1: Induction Coil

Image 2: Tesla Coil

I have long meditated upon the mysterious question that has puzzled many
scientists for centuries, and that is:

Given the clues that Tesla has given us over a century ago, and the beautiful
displays of arcs that Induction and Tesla Coils produce, there is no doubt that the
mystery about electricity can be solved.

Tesla’s reference to the use of grey matter and the principle of the viscosity and
adhesion of fluids – the ether - certainly revealed his understanding of what
electricity was.

Page 29 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Although we have been led to believe that electricity or electrical discharges are
the result of electron flow from a negative plate to the positive plate, you cannot
exclude the possibility that these electrical discharges are the result of ether
manipulation.

Given that we are all moving with the wheelwork of the universe, and that the
ether is stationary, the application of currents of high potential and high
frequency between a positive and a negative plate severely alter the state of the
ether between the plates to such a degree, that as Tesla described, the region
between the plates become rigid and what we observe is in fact the friction of
rigidified ether between the plates and the gaseous/liquefied ether surrounding
the plates.

Because the ether is stationary, and the plates are moving at over 2,000,000
km/h with the wheelwork of the universe, we observe extreme friction of the
ether and thus, this creates the heat and arcs that we observe. In simple terms,
severely displaced ether particles will create the electricity and the sparks that we
observe in Tesla and Induction Coils.

So, when you are working with Tesla Coils to produce large arcs, you are in fact
observing the ether in action. Though you may not be aware of it, you have been
indeed harnessing the ether with your Tesla coils, through the application of
currents of high potential and high frequency.

In summary, when the stationary ether changes state from ‘fluid’ to ‘solid’ with
the application of gray matter – currents of high potential and high frequency –
arcs and electrical discharges are created because there is friction created
between the two different states of the ether.

What we actually observe when arcs and electrical discharges are created is in
fact friction of the ether occurring between the moving ‘solid’ ether – i.e.,
between the conductors creating the electrical discharges because they are
moving with the wheelwork of the universe – and the stationary ‘fluid’ ether.

What Is Light?
It has been proven that the wonderful and mysterious nature of light is also
electricity at ultra high frequencies to the order of 405-790n Terra Hertz.
Furthermore, light comprises of both electric and magnetic fields which propagate
at the speed of light perpendicular to each other as shown in the following
diagram.

If we look closer at the propagation of light, it bears similar resemblance to the


helical, sine-wave motion that planets and stars follow in their wheelwork of the
universe. In the following diagram

Page 30 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Image: Electromagnetic Radiation Propagation

From Tesla’s description of the basic ether particle, with the ‘independent carriers’
immersed within the ‘insulating fluid’, it can also be inferred that with the
application of currents of high potential and high frequencies, the basic ether
particle as described here would be subject to stress of high degree, that while
the ‘independent carriers’ are displaced, by virtue of Isaac Newton’s law of action
and reaction, the ‘insulating fluid’ would move in the opposite direction in an
attempt to re establish equilibrium.

In doing so, the ‘independent carriers’ and the ‘insulating medium’ would oscillate
with each other at 90 degrees to each other, hence this elegantly fits in with our
current understanding of the propagation of electromagnetic radiation as shown
in the above image.

Because of the density of the ether being 1093 grams per cubic centimeter, this
would reveal the underlying property of the ether, which gives us the elegant
value of what is known to the scientific community as c:

C = speed of light, 3 x 108 m/s

More can be said about this. Light does not propagate like a wave as we know it,
but rather, what we perceive by the eye to be light is in fact, the wave
propagation of the ether created by the severe oscillation of the ‘independent
carrier’ and the ‘insulating fluid’, which oscillate at 3 x 108 m/s

What Is Gravity?
Despite the vast amounts of books that have been written on the topic of gravity,
and the ‘mathematical garb’ that follow it, acknowledging that gravity is
intrinsically connected to the wheelwork of the universe, the current model of the
universe adopted by the scientific community – Sir Isaac Newton’s laws and
Albert Einstein’s laws – are the goof of all time.

Under the influence of ‘gravity’, all matter will fall to the ground and although
seemingly will appear stationary on the ground, matter will always be influenced
by a force in the direction of the centre of the earth, where this is our link to the
wheelwork of the universe.

With this in mind, there is no doubt that there is an Electric and Magnetic field
connection to gravity. We have observed that a current carrying wire placed in an
external magnetic field will experience a force perpendicular to the Electric and

Page 31 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Magnetic field, all the while opposing the force of gravity imposed on the wire
with supreme ease.

Now, to get a clear understanding of what gravity is - as Tesla understood it - we


must explore how matter behaves within the ether when the ‘independent
carriers’ have been displaced due to the presence of an electric field.

Because the ether is immensely dense and super fine due to its size, it inter-
penetrates all matter. As per Tesla’s description of the ether, an upset of the
‘independent carriers’ and the ‘insulating fluid’ of the basic ether particle will have
a follow on effect on the matter that it envelopes, hence creating motion.

So, when you consider our own earth and ionosphere system, the state of the
ether beyond our ionosphere is different to the state of the ether within our
atmosphere and again different within the earth.

As far as I know, while all matter within our atmosphere – unless it is a UFO – fall
to the surface of the earth, earth’s electric and magnetic fields – as a result of the
wheelwork of the universe - plays a crucial role in defining the gravitational
constant.

To demonstrate how the ether particles behave in our earth / ionosphere system,
refer to this illustration:

Page 32 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

(Important Note: This is a 2 dimensional view. You must imagine this image on a 3 dimensional global scale and also keep
in mind earth’s rotation about it own axis and orbit through space and that the medium filling all space in stationary).

Page 33 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Region 1: The Ionosphere (+) Plate


In the region beyond the earth’s ionosphere, the ‘independent carriers’ are in
their equilibrium state. However, the region in close proximity to the earth’s
ionosphere, the ‘independent carriers’ will be displaced away from the ionosphere
because they are repelled - since the ionosphere has a positive charge.

Here is where it gets interesting… While the earth is orbiting through space at
enormous speeds and spinning on it own axis, the ‘independent carriers’ are
displaced again when they make the transition from the ionosphere into the
earth’s atmosphere. Refer to this magnified illustration between regions 1 and 2:

Because the ‘independent carriers’ are repelled from earth ionosphere, they would
as they enter the earth’s atmosphere, they would ‘flip’ from position 1 to position
2 and remain displaced towards the earth as per earth’s electric field.

It is worthy noting that because earth’s behaves as a low exhausted globe – as


per Sir Crookes’ tube – the dynamics of this ‘flipping’ of the independent carriers
taking place at the earth’s ionosphere would also add to the rotation of earth’s
spin about its own axis.

Page 34 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Region 2: Earth’s Atmosphere


In this region, the ‘independent carriers’ would be displaced towards earth’s
surface as per earth’s electric field. In this region, it is akin to an exhausted
vacuum tube as per Sir Crookes and it is at our mercy to manipulate the region in
the earth’s atmosphere using a magnifying transmitter and to alter how gravity
behaves in this region – more on the magnifying transmitter in a later topic.

Now, to understand how ‘gravity’ affects matter and forces objects towards the
earth’s surface, I will illustrate this point in the following diagram:

First thing to acknowledge is that within all matter or objects - including earth –
the electric field is zero. This means that the ‘independent carriers’ are in their
equilibrium state and are not displaced.

This has profound implications.

This is quite important: As stated earlier, you must take into account earth’s orbit
through space and its rotation about its own axis. Although seemingly the object
will appear to be falling in a straight line towards the earth, in reality it is not.
Like the earth and the sun, the object follows that helical, sine-wave motion as
defined in the wheelwork of the universe. The object would appear to spiral
towards the ground.

So, because of earth’s electric field, while the ‘independent carriers’ are displaced
in the direction of earth, as they enter the objects, the ether particles acquire the
equilibrium state and in doing so, they ‘flip’ as they do in the earth’s ionosphere.

To illustrate this ‘flipping’ of the ‘independent carriers’ as they enter the object,
refer to this diagram:

Page 35 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

So, as the ‘independent carriers’ enter the object and are ‘flipped’ upwards and
regain equilibrium because the electric field within the object is zero, by virtue of
Isaac Newton’s action reaction law, the ‘insulating fluid’ will be displaced
downward as it regains equilibrium and thus it will exert a force on the object in
the same direction - downwards.

As the ‘independent carriers’ again leave the object, they will experience ‘flipping’
again and they will be displaced downward. This time, the ‘insulating fluid’ will be
displaced upward and will exert a force on the object in the same direction –
upward.

The difference in the downward and upward force exerted by the ‘insulating fluid’
on the object will drive define the object’s path. This ‘flipping’ of the ether
particles is what drives objects towards the ground, thus intrinsically connected to
gravity.

Region: Earth’s Surface (-) Plate


In this region, the ‘independent carriers’ will experience ‘flipping’ again as they
enter earth’s surface because the electric field within the earth is zero.

It is very important to note that this ‘flipping’ of ‘independent carriers’ occurring


at the ionosphere and the earth, the resultant dynamics is akin to rarefaction –
stretching and compressing.

Page 36 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Flaws In Our Current Understanding Of Physics


It is worth noting that there are some flaws in our current understanding of
physics, two of which will be discussed here - that must be explored as they will
provide you with a greater understanding of electromagnetism.

(i) The Electric And Magnetic Fields


If a stationary point charge, whether it be a positive or a negative charge,
exhibits an electric field, and a moving charge creates a magnetic field, then how
can this be true if we are already moving through space at phenomenal speeds?

You see, even though the point charges are stationary from our point of view, in
reality, they are moving through space at phenomenal speeds.

So, if the ‘supposedly’ stationary point charge exhibits an electric field, then
exactly what is the electric field given that the point charges are not stationary?

(ii) The True Definition Of The Vacuum


We are led to believe that a vacuum is a region of space that has had its air
exhausted and removed from a gaseous medium – for example, in a vacuum tube.

However, with Tesla’s view of the entire cosmos filled with the ether particle,
what we are led to believe is the vacuum is not true.

What will happen were you to apply electromagnetic fields to the highest degree
that it could displace the ether particles in an outward radially manner?

This would create a space of nothingness? A vortex? This will be up to you to


experiment and prove it to yourself.

It is interesting to note that the creation of such a pure vacuum will in fact create
a portal that will connect you to the centre of the cosmos because all phenomena
subject to ‘cause and effect’ will have their origins at the centre of the cosmos, as
defined by the wheelwork of the universe.

The Ether - In Summary


In summary, from Tesla's description of the ether particle, the entire cosmos is
an ether-filled medium which is stationary. The ether particle remains in
equilibrium until it is met with charged particles – for example: planets, stars,
atmospheres and matter in its voyage through space – which then upsets the
ether’s equilibrium by displacing the ‘independent carriers’, thus creating the
electric field and the magnetic field by displacing the ‘insulating fluid’.

Page 37 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Understanding Tesla’s Magnifying Transmitter

Bearing in mind what I have covered on the wheelwork of the universe, I now
draw your attention to understanding the great power that lies in the Magnifying
Transmitter, and the boundless technical possibilities of this marvelous machine
that you have at your disposal in the immediate future.

Tesla’s Magnifying Transmitter would have to be the most important of all his
inventions and one that must be rebuilt now. I cannot stress how important it is
to rebuild it and although the idea is over 100 years old, it can be redesigned with
today’s technological advancements.

Page 38 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
As I shall show you shortly, the Magnifying Transmitter that will lead us into the
future is not one that can create enormous arcs or millions of volts, but one that
will run efficiently, endlessly and almost maintenance-free, one that will require
very little effort to work, one that would be geared to the very wheelwork of the
universe and will collect unlimited energy from the cosmos as the earth travels
through space at phenomenal speeds.

Just imagine the enormous energies available to us that we can find in the
supposedly ‘empty space’!

According to legend, Nikola Tesla presented a paper to JP Morgan on the


innumerable technical possibilities of his Magnifying Transmitter. These included
wireless communications, wireless transmission of power that could power
electrical cars, appliances, flying machines, and could even provide a protective
shield against the enemy’s missiles, planes and soldiers. As we saw in Sir Crookes
Figure 1 above, this is made possible by simply using earth and ionosphere as the
‘Crookes tube’ and creating that protective shield using the magnifying
transmitter.

Tesla also made the statement that his Magnifying Transmitter could down an air
fleet of 250 planes and ‘zap’ soldiers in their tracks. I can confidently state that
these possibilities Tesla conceived over 100 years were not outrageous ones.
They were sound ideas and could be backed by our current laws of physics.

This was Tesla’s conception of his Magnifying Transmitter:

These stupendous ideas of Tesla and the enormous power of the magnifying
transmitter could be accessed by anyone on this planet and could access it for
free. JP Morgan’s response to that was “If anybody could access this power,
where could you put the meter?”

This very decision made by JP Morgan has placed us at least 100 years behind in
terms of advancing technologies only to serve his hunger for money and power.

Page 39 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
This decision later led to the destruction of the Magnifying Transmitter on Long
Island, New York. Despite the claims made by Tesla, I will show you how these
possibilities are indeed within our grasp, that we have the technology, the
materials, and the expertise to build all these and more. All we need to do is unite
and take action. The only obstacle we have is in understanding Tesla’s ideas, and
these obstacles I plan to remove by enlightening you on this matter.

Another possibility of the Magnifying Transmitter which I found ludicrous upon


initial study of Tesla’s Autobiography was the creation of waterfalls, lakes and
weather control. This is an excerpt from Tesla’s autobiography:

This possibility, ladies and gentlemen, is only a question of time when we will
realize the creation of such a beautiful future. Do not be surprised if this has
already been achieved and that governments are already manipulating weather
patters through the H.A.A.R.P project.

You can even build a Magnifying Transmitter near a water fall and tune it to the
sound of the water fall to create unlimited amounts of energy for the use of man.

Side Question: Do you think that the Saudi’s will appreciate the Magnifying
Transmitter to create waterfalls, lakes in their dry desert?

Take serious note:


What must be acknowledged here is that when Tesla refers to controlling the
Sun’s energy, he is NOT talking about using the sun’s rays! He is actually
referring to harnessing the sun through the wheelwork of the universe as defined
in this document. And our link to the sun is the centre of the earth because the
earth’s centre is what takes us on that helical path through space.

Now, according to Tesla’s autobiography, he provided us with a clear analogical


description of the Magnifying Transmitter as follows:

Page 40 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
I have underlined the most important key words in his description. Can you see
any correlation between this and what he had discovered in Sir William Crooke’s
work on Radiant Matter?

Just like you can use a telescope, which encompasses a series of concave mirrors
to focus all the light from distant stars and magnify them, or even use a convex
lens to converge the sunlight to create extreme heat, the Magnifying Transmitter
was designed to magnify or ‘excite’ the earth and resonate with the earth’s path
through the universe. He said the ‘peculiar transformer was specially adapted to
excite the earth’.

This is profound.

Recall that earth is nothing more than a huge ball of metal sphere and this sphere
can be charged like an electron can.

I will explain in further detail shortly as I cover more of Tesla’s experimental


writings in Colorado Springs.

The Important Colorado Springs Experiment


One thing I noticed from the Tesla Coil builders was that their main goal was to
build a very powerful coil that produced powerful, long arcs. While I studied
Nikola Tesla’s work on the magnifying transmitter, I realized that although his
goal in wireless transmission of power could be achieved by building a very
powerful transmitter, one that produced millions of volts, he made a discovery
that changed the course of his work and led to building a more efficient tower
that could send power all over the world wirelessly with very little loss.

To understand this, I draw your attention to a series of excerpts from his writing
“THE TRANSMISSION OF ELECTRIC POWER WITHOUT WIRES” that was
communicated to The Thirteenth Anniversary Number of the Electrical World
Engineer, March 5, 1904.

Initially, he expressed his intention to develop a transmitter of great power:

Page 41 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Tesla described how he wanted to transmit the power through the natural
medium of the atmosphere. There are 3 key items I wish to highlight here:

1. Tesla started out by designing a Transmitter of great power.


2. Tesla’s goal was to individualize the energy and provide transmission of
secure signals.
3. Ascertain the laws of propagation of currents through the earth and the
atmosphere.

As I read on, I found more intriguing statements that showed that our very own
globe was alive with electrical vibrations as Tesla described and was a vehicle for
free energy. So, Tesla setup sensitive electrical instruments to record the activity
of an oncoming thunderstorm.

As shown here, Tesla said:

Now, here Tesla described how his sensitive instruments were affected stronger
by lightning at great distances than those near by:

Page 42 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Page 43 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
He was quite puzzled by this and he stated that the explanation as to why this
occurred may have been due to something happening inside the earth. He wrote
a chapter in his lecture before the Franklin Institute and Tesla stated that the
solution had presented itself then, but he dismissed it because he thought it was
impossible. So, he performed the same experiments as clouds grew heavy and
grey and was more prepared.

Here, he wrote:

This would have to be the most important observation that Tesla ever made.
Nikola Tesla described how his recording instruments created a sine wave pattern
with the max and minimums as the thunderstorm retreated to over 300 km from
where he was situated at. As they retreated, the thunderstorms still recorded
their maximum loops with undiminished force.

What is important to note here is that his recording instruments were in fact
recording the effect the thunderstorms had on the earth. He then stated that he
was observing stationary waves, which he thought was impossible when the
idea had crossed him mind before the Franklin Institute.

This is the key to designing an efficient Magnifying Transmitter and to


collecting cosmic energy in unlimited amounts.

What’s more, here is where he stated that the earth behaved like a huge
conductor:

Page 44 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Yet more important writings of Tesla to note:

Here he described that with the new experimental data, he redesigned the
Magnifying Transmitter. He stated that although his original intent was to build a
powerful one, instead he redesigned it to be more efficient.

What was Tesla telling us here?

Page 45 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
He was saying that he had designed the Magnifying Transmitter to collect the
‘impressions upon the earth’ and it behaved like an ‘immense pendulum’. He said
that the circuit ‘acts’ like an immense pendulum, which meant that he was talking
present tense at the time which means that he had achieved it. What he had
done was successfully collected energy from the cosmos and stored it using with
his Magnifying Transmitter!

This is how Tesla was able to produce hundreds of millions of volts with his
Magnifying Transmitter because he had indeed tapped into the wheelwork of the
universe.

The key item to note here is that the magnifying transmitter was ‘diametrically
opposite’ of a transmitting circuit typical of Hertzian or electromagnetic radiation.
This is important because Tesla was saying that the electromagnetic radiations
were reduced to an insignificant quantity. In effect, electromagnetic radiation is a
‘waste’.

With this stupendous discovery in mind, Tesla had redesigned his magnifying
transmitter to resonate with the earth, had successfully harnessed the wheelwork
of the universe and created a circuit which collected the energy from the universe.

What’s more, this energy came from the centre of the earth because this is our
link to the wheelwork of the universe through the Sun and the Milky Way Galaxy.

What’s more, the stationary waves within the earth are sine waves that are
stationary and possess energy. Stationary waves are a by product of earth’s huge
internal electrical conductivity deep in the core because the core is linked to the
wheel work of the universe.

To recreate the Magnifying Transmitter, all you need to do is create a circuit that
resonates with the stationary waves within the earth. In doing so, you are truly
harnessing the wheelwork of the universe, like Tesla did.

Why do you think Tesla had placed two enormous conducting rods within the
earth? This is because they acted like huge antennas which collected energy from
the Ether through the earth’s centre.

These enormous conducting rods also served to resonate with the stationary
waves which are a result of earth’s cosmic motion through the wheelwork of the
universe. The conducting rods created electrical vibrations through the entire
earth which could be used by anyone on the surface of the earth to retrieve
electricity.

Why do you think they destroyed the Magnifying Transmitter?

Tesla was producing free energy. That’s why.

The JP Morgan’s and his brotherhood, i.e., the government, destroyed it all in the
name of profit and to enslave you all. The government uses energy as a form of
people control, and when this resource becomes available to us for free, they lose
control! Period!

So, if you want to recreate the Magnifying Transmitter, let’s work together and do
it for Tesla. Let’s prove his ideas and prove that he was not crazy!

Page 46 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

The Earth And the Ionosphere System

Collecting Cosmic Energy


To truly understand the power of the Magnifying Transmitter, it is now worth
exploring further the innumerable possibilities that the Magnifying Transmitter
can offer to humanity. It is, however, crucial to understand how the earth works
as a whole to truly see the great power of this machine.

Bearing in mind the topic I covered on the basic ether particle and the effect
electric and magnetic fields have on the ‘independent carriers’ in topic: ‘The Ether
– Also Known As The Luminiferous Aether’ in section ‘What Is Gravity’, I now
delve deeper into the workings of the Magnifying Transmitter and how it affects
the earth and everything that walks it.

It is important to note that the sensitive instruments Tesla was using in his
Colorado Springs experiments were not measuring the thunderstorm activity, but
rather measuring the effect the thunderstorms had on the earth’s internal activity.

Tesla’s sensitive instruments were actually measuring the effect the storms had
on the stationary waves within the earth.

To comprehend this, it is imperative to understand how the earth system works


as a whole. Now, we all know that the ionosphere and the earth’s surface behave

Page 47 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
as an enormous capacitor. The earth behaves as the negative pole and the
ionosphere behaves as the positive pole, with the atmosphere behaving as a
spherical insulator.

What’s more, the atmosphere between the earth’s surface and the ionosphere
behaves like an exhausted or partial vacuum.

Now, because of the wheelwork of the universe, the entire earth and ionosphere
system is determined by what is taking place at the centre of the earth as this is
our link to the universe.

As I explained earlier, the earth is bound by the centripetal force:

The electrical activity that lies in the centre of the earth creates the earth’s
rotating magnetic field, determines how far the earth will be from the sun and
also dictates the ionosphere’s behavior.

With the magnifying transmitter, it can be used to ‘excite’ the earth, thereby
changing the capacitance of the earth / ionosphere system which will
inadvertently affect the entire magnetic field of the earth. This ‘excitation’ of the
earth will also have an effect on the ‘independent carriers’ in the ether and thus
affect the gravitational effects they have on objects.

This has remarkable consequences and will even change the course of earth’s
path around the sun, but this will depend entirely on how much you want to
excite the earth.

Also, the magnifying transmitter can be used to resonate with the electrical
activity of the earth. The magnifying transmitter can also be designed to resonate
with the stationary waves, which in turn will send electricity to the magnifying
transmitter, which can then be stored indefinitely and distributed to the entire
planet. The source of power that is harnessed to create this electricity originates
from the centre of the earth which links us to the wheelwork of the universe.

Above all, the magnifying transmitter can be tuned so that instead of producing
long electrical arcs, you can send electrical vibrations through the earth which
can then be received by an antenna at the other side of the globe with very little
loss.

Recall that as per Tesla’s writings in Colorado Springs, the electromagnetic


radiations were reduced to a minimum and all electrical vibrations created by the
magnifying transmitter were reduced to a minimum, thus conserving the energy
within the earth.

It is important to note that because of the capacitance between the earth and the
ionosphere, the atmosphere acts like an insulator. Since the earth behaves as the
negative pole, exciting the earth using the magnifying transmitter will not

Page 48 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
necessarily send streamers around the globe through the earth unless the power
is great enough to break through the earth’s capacitance / insulator.

Because of this, the electrical vibrations have nowhere to go and are conserved
within the earth. This is the message Tesla was trying to get across with his
Magnifying Transmitter. That the electrical vibrations are conserved and not lost,
as do Hertzian waves – electromagnetic radiation. There is no loss and these
electrical vibrations can be tapped into using an antenna anywhere around the
globe.

Crucial to the magnifying transmitter design are the enormous rods that Tesla
had inserted deep into the earth’s surface because they behaved as huge cosmic
antennas that collected the cosmic energy from the universe.

Applications Of The Magnifying Transmitter


Strategic installations of the magnifying transmitter along the country’s borders
can provide protection for all countries, weak or strong, by creating a protective
shield that nothing can penetrate.

Also, we can use the magnifying transmitter to alter earth’s path about the sun
and alter weather patterns.

In the automobile industry, we can use the magnifying transmitter to provide


electrical power to the vehicles in unlimited amounts and design the vehicles so
that they received the required amount of energy from the universe when they
need it.

Page 49 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Tesla’s Flying Machine – The UFO


Despite all the laughable media and conspiracy theories that are associated with
the UFO – Unidentified Flying Machine – not only do I believe that flying machines
exist, but I am also confident enough to say that most UFOs you see today in the
media are based on Nikola Tesla designs and what’s more, that Tesla himself built
a flying machine before he died.

While I was reading Tesla’s autobiography, I was quite intrigued when he himself
stated that he conceived the idea of flying machines while he was a student. I
now refer to this excerpt from his autobiography:

This is the kind of flying machine that Tesla had conceived:

Page 50 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Tesla even explicitly stated that he revealed the workings of this flying machine in
one of the pages of his lecture. More on this later.

The key items to note here is Tesla stated that the flying machine was ‘sustained
and propelled entirely by reaction’. As I delved more into Tesla’s work, it finally
came to me. Not only did it become utterly clear how easy it was to create a
flying machine, but how easy it was to defy gravity as well.

First, I will discuss the ‘force on a wire experiment’.

The Force on a Wire Experiment


What did Tesla mean his flying machine was ‘sustained and propelled entirely by
reaction’? At first, I was quite puzzled by this. It turns out that I had to go back
to my old physics books and revisit the very basics of ‘electric and magnetic
fields’, because ultimately, you are using these fields to defy gravity.

Refer to this illustration for ‘The Force on Wire’ experiment:

Essentially, when a wire carrying a current (I) is placed in an external magnetic


field (B), the moving charges within the wire will experience a force. The end
result is that the wire will experience a force (F) which is perpendicular to the
direction of the current (I) in the wire and the external magnetic field (B). The
Physics formula for this is given by:

Where L is the length of the wire.

Page 51 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
What is worthy noting here is that the current carrying wire (I) also exhibits a
magnetic field. The wire creates a spiraling magnetic as shown in this illustration:

What we have here is there are two magnetic fields repelling each other, namely,
the external magnetic field (B) and the spiraling magnetic field created by the
current carrying wire (I). This is analogical to placing two like poles of magnets
near each other and they repel each other.

The concept of ‘two’ magnetic fields will become clear when I explain Tesla’s ‘p2’
system later.

What’s more, in a similar experiment, if you have two current carrying wires near
each other, and the current in the wires are in the same direction, the two wires
will experience a force and attract each other, whereas, when the current in the
wire are in the opposite direction, the wires will repel each other.

Though it was not conceived at the time, this simple experiment performed over
200 years ago was in fact a form of electro-propulsion, the propulsion system
used in flying machines.

Page 52 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Tesla’s Lecture
I was quite excited when I read Nikola Tesla’s autobiography because it was an
opportunity for me to delve deeper into Tesla’s mind and to understand Tesla’s
elegant work. I was quite intrigued to read that Tesla had explicitly stated he had
presented the workings of his flying machine in a lecture. I had to get my hands
on this and study it.

Here is an excerpt of the Lecture Nikola Tesla presented before the American
Institute of Electrical Engineers in London:

Initially, I had no idea what Tesla was talking about here.

In item 1, Tesla initially mentioned that the medium filling space consisted of
‘independent carriers immersed in an insulating fluid’. Here, Tesla was actually
describing the ether and its internal structure – already discussed above.

I draw your attention to items 7 and 8 because these will serve as the most
important brain feed you will ever receive, which explains how Tesla’s two
electrical systems that could be used to defy the gravitational forces that are

Page 53 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
imposed upon us in that wheelwork of the universe. This also provided a hint to
Tesla’s ‘p2’ system.

Tesla’s Lecture: Item # 7

Here, Tesla described that rarefaction – stretching - occurs if a steady potential is


applied and that there would be less ‘independent carriers’ in the brush than in
the space at some distance. This clearly indicated that by using a DC potential,
the ether around the electrode became stretched.

Bearing this in mind, suppose you were to apply DC pulses of high potential and
high frequency in a conductor? During the DC pulse, this would create stretching
of the ether and during the DC reversal, the ether would return to it equilibrium
state – thus creating that stretching effect on the ether.

Furthermore, if we apply what we learned in Sir Crookes’ experiments illustrated


here, and used a curved, hemi-sphere conductor, what would be the end results?

I delve deeper into this remarkable possibility in a later topic as I discuss the
workings of the UFO, as conceived by Nikola Tesla.

Tesla’s Lecture: Item # 8

Two important items worthy noting here:

1. Tesla described that if you applied currents of high potential and high
frequency, compression of the ether would result.
2. The ‘motion of translation through measurable space would cease’.

What must be understood here is that when you apply currents of high potential
and high frequency directly into a conductor, the act of rapid changes of potential
stresses the ether to such a degree that they are compressed. This compression
of the ether – or rigidity of the ether – acts as a ‘squeezing’ effect on the
conductor and the conductor would experience a force in the direction opposite to
the motion as defined by the wheelwork of the universe. Remember, even though
the conductor may appear to be stationary, it is in fact moving with the earth’s
motion through the universe with the earth.

So, because the ether interpenetrates all matter and is stationary, the
compression of the ether would prevent movement of the conductor in the
direction defined by the wheelwork of the universe and experience heat and move
in the opposite direction.

Page 54 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Sustained and Propelled entirely by Reaction
So, what I have illustrated here is exactly what Tesla was referring to when he
described the workings of his flying machine: “Sustained and propelled entirely by
reaction”.

The flying machine is operated by passing currents in a conductor, which create a


magnetic field and then propelled through space by applying an external
magnetic field. The two opposing magnetic fields create the action/reaction
forces which then propel the flying machine.

The UFO Shape – Analogy To Force On A Wire Experiment


In the examples presented here, I have used current carrying wires to illustrate
the forces exerted on the wire when they are placed in an external magnetic field.
Now, with this in mind, how different would this be had I used two spheroid
conductors, i.e., the top and bottom spherical shapes used in the design of the
UFOs seen in the media?

If we were to replace a straight conducting wire with two conducting spheroids,


this would yield similar results. To illustrate how the ‘force on a wire experiment’
can be extrapolated to enlighten you on the workings of the flying machine – the
UFO - refer to the following illustration:

Essentially, the UFO design exhibits two half spheroids which are affixed together.
Now, if you apply a DC – Direct Current - to the top half of the UFO, this will
create a magnetic field. To get the desired effect, we require an external
magnetic field to create the propulsion.

Now, here is where it gets interesting…

The external magnetic field which would create the propulsion would come from
the bottom half of the UFO. If you applied AC - Alternating Current - to this
conducting spheroid, you will see that this UFO will experience a force
perpendicular to the DC current and the external magnetic field, as per the ‘force
on a wire’ experiment.

Page 55 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
Note also that the AC that is applied to the bottom half of the UFO would yield a
rotating magnetic field, so this would be ideal for the purpose of achieving
propulsion of the UFO.

What’s more, as I discussed in an earlier topic, ‘Figure 19: Heat Generated using
Concave Shape Cups’, just like you can focus radiant matter to generate heat, or
use a telescope to focus the light of stars, or a lens to focus sunlight, you can
focus the magnetic fields generated by the DC top half spheroid and by the AC
bottom half spheroid.

Imagine for a moment that you are focusing these two magnetic fields and it is
happening at an extremely high frequency? More to follow in a later topic… ’Tesla
Patent 723188 – Also known as the P2 System’.

Tesla Clues On His Flying Machine


In Tesla’s writings, he gave several clues which related to the workings of his
Flying Machine. Ultimately, the Flying Machine, when in operation, does not defy
gravity. Rather, the flying machine harnesses the wheelwork of the universe as I
have described here, and effectively levitates because it is going against the
wheelwork of the universe.

Now, I would like to highlight two excerpts from Tesla’s articles which gave clues
to the workings of his flying machine.

(a) Viscosity and Adhesion of Fluids – The Ether


Article: “TESLA'S NEW MONARCH OF MACHINES”, by Nikola Tesla, New York
Herald, Oct. 15, 1911
http://www.tfcbooks.com/tesla/1911-10-15.htm

“When I found that I had been anticipated as to the flying machine, by men
working in a different field, I began to study the problem from other angles, to
regard it as a mechanical rather than an electrical problem. I felt certain there
must be some means of obtaining power that was better than any now in
use. And by vigorous use of my gray matter for a number of years, I grasped the
possibilities of the principle of the viscosity and adhesion of fluids and conceived
the mechanism of my engine. Now that I have it, my next step will be the perfect
flying machine.”

In this article, Tesla spoke of using gray matter to operate his flying machine
through the adhesion and viscosity properties of fluids.

This is profound.

What was Tesla referring to gray matter, viscosity and adhesion of fluids? While I
delved deeper into Tesla’s work, I realized that the ‘fluid’ he was referring to was
the Ether.

Through his experiments, Tesla was able to manipulate the ether using gray
matter – electrical currents of high potential and high frequency. Tesla discovered
that the ether surrounding the conducting elements could be stretched and
compressed like a rubber band to create propulsion within the conducting
elements. As Tesla stated in his lecture before the American Institute of Electrical
Engineers, referring to point 7:

Page 56 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

The ‘carriers’ that Tesla refers to here is the ether. Now, if a brush is formed from
a steady potential – as per the current carrying wire illustrated above – this would
yield rarefaction of the ether. In other words, the ether is stretched.

However, referring to point 8:

If the potentials were ‘rapidly’ changing and the higher the frequency of the
pulses, this would yield compression of the ether.

This is Tesla’s use of gray matter – electricity - to stretch and compress the ether
around the conducting elements to create propulsion in his flying machine.

(b) The Two Electrical Systems


Article: “HOW COSMIC FORCES SHAPE OUR DESTINIES”, by Nikola Tesla,
New York American, February 7, 1915
http://www.tfcbooks.com/tesla/1915-02-07.htm

Following on from Tesla’s muses on the viscosity and adhesion of fluids – The
Ether - in this article, Tesla discussed how all humans beings on the planet are
influenced by the workings of the universe and the rotation of the planets. These
are his opening statements in this article:

“Every living being is an engine geared to the wheelwork of the universe. Though
seemingly affected only by its immediate surrounding, the sphere of external
influence extends to infinite distance. There is no constellation or nebula, no sun
or planet, in all the depths of limitless space, no passing wanderer of the starry
heavens, that does not exercise some control over its destiny—not in the vague
and delusive sense of astrology, but in the rigid and positive meaning of physical
science.”

What I found most interesting in this article was the following statement:

“What wonder then that in such a terrible turmoil, in which cast iron existence
would seem impossible, this delicate human engine should act in an exceptional
manner? If all automata were in every respect alike they would react in exactly
the same way, but this is not the case. There is concordance in response to those
disturbances only which are most frequently repeated, not to all. It is quite easy
to provide two electrical systems which, when subjected to the same influence,
will behave in just the opposite way. “

Note Tesla’s reference to ‘two electrical systems’. Tesla explicitly stated that by
using two electrical systems, it is simple to oppose the forces that we are

Page 57 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
subjected to through the wheelwork of the universe, and to defy gravity.
Remember that the true sense of anti-gravity is to defy the wheelwork of the
universe.

So, I found this interesting because if you could provide two electrical systems
and easily defy ‘gravity’, then it seemed simple to create such an electrical
system.

The two electrical systems that Tesla refereed to are the DC and AC currents as
per the examples I presented here in topic ‘The UFO Shape – Analogy To Force
On A Wire Experiment’.

Now, I cover a Tesla patent which can be used to create a flying machine that will
have the ability to levitate, travel at great speeds, and to maneuver at right
angles, without being subjected to inertial forces.

Page 58 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Tesla Patent 723188 – Also known as the P2 System

In order to understand how this patent can be used to create a flying machine as
Tesla himself conceived it, it is very important for you to visualize the cosmos in
its entirety.

You must take into account the wheelwork of the universe that I have covered
previously. You must acknowledge that when dealing with currents of high
potential and high frequencies, that you are tapping into the great power of the
ether whose density is 1093 grams per cubic centimeter, and that the
electromagnetic forces are 1040 stronger than the force of gravity.

Although you are dealing with such forces, there is no need to concern yourself
with inertial forces that this craft may be subject to. There is no worry if a human
being travels at enormous propulsive forces, they will not crush to death due to
the ‘g’ forces because they will not be subject to ‘g’ forces.

While you visualize the cosmos as a whole, it is important to note that there is a
medium which fills all space, namely, the ether. Just like water fills the ocean and
submarines have the ability to submerge, levitate and to propel through the
water, we have the ability to create a flying machine that can levitate and propel
through space by harnessing the wheelwork of the universe.

Page 59 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
While the stationary ether fills all space, the planets, the stars and even human
beings are propelling through the ether at enormous speeds. It is also worth
noting that because of the ether’s density, 1093 grams per cubic centimeter, at
the quantum, atomic level the ether interpenetrates all matter.

So, while all matter is moving through the wheelwork of the universe at over
2,000,000 km/h, the stationary ether penetrates all matter.

Note also that Tesla’s muses on currents of high potential and high frequency led
him to discover that the ether could be accessed and manipulated to the extent
where he could change the state of the ether to solid or elastic and create
propulsion using conducting elements.

It is worthy noting that when the ether is compressed through the application of
high frequency and high potential AC, any matter or conductor which occupies
this compressed ether region will experience a force and ‘bounce’ away from this
region.

This is because the compressed ether will simply prevent the motion of matter
through it, thus resisting the motion bound by the wheelwork of the universe and
the object will go exactly in the opposite direction. In this case, instead of being
forced in the direction of earths centre, the object will go upwards in the direction
of earth’s ionosphere and beyond.

With this in mind, Tesla’s patent # 723,188 will serve us well when we want to
create a propulsion system or a flying machine. Although it is a patent to create
wireless transmission of power, it can be used for the flying machine because we
are conserving all the electro-magnetic radiation within the conductors, as
opposed to propagating in the atmosphere. Because we are moving with the
wheelwork of the universe and the ether is stationary, through the application of
DC and AC in the conductors will upset the ether within the conductors and create
propulsion.

Page 60 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au
To illustrate this, refer to this diagram:

Figure (A):

Now, this is quite important. As I stated earlier, even at the resting position of
the UFO on the ground, there are gravitational forces acting on it and it is moving
with the earth through the wheelwork of the universe at over 2,000,000 km/h. As
per Tesla, with the application of two electrical systems – the p2 system – when
this UFO lifts off or performs 90 degree maneuvers, it is in fact harnessing the
wheelwork of the universe.

What’s more, the p2 system can overcome the gravitational forces of 9.8 m/s2
acting on the UFO with supreme ease because while you are using currents of
high potential and high frequency to 'tap’ into the ether, the resultant forces
created by electromagnetism are 1040 stronger than the gravitational force.

So, if you have witnessed a UFO either personally or in the media vanish out of
thin air, this need not be in discord with your current beliefs. This is possible!

In the design of the flying machine, one of the spiral coils must be affixed to the
top half conducting spheroid – the top half of the UFO - and the other to the
bottom half of the conducting spheroid – the bottom half of the UFO.

This electrical circuit must be tuned to such a delicate degree that the spiral coil
situated at the top half of the spheroid conductor produces high voltage DC
pulses in order to create rarefaction or stretching of the ether in the upward
direction as per Tesla’s lecture item number 7:

Page 61 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

On the other end of the UFO, the spiral coil situated at the bottom half of the
spheroid conductor must produce AC at extremely high frequencies, to such a
degree that the ether is compressed as prescribed by Tesla’s lecture item number
8:

While in operation, while the DC pulses stretch the ether, and the AC compresses
the ether, the net effect would be a propulsive force in the upward direction –
opposite to the force of gravity.

As I highlighted in ‘The Force on a Wire Experiment’, the spheroid conductor


producing the DC is akin to the current carrying wire (I) and the spheroid
producing the AC is akin to the external magnetic field (B), however, because the
AC produces a rotating magnetic field, the propulsive effect would be much more
potent.

‘The Force on a Wire Experiment’ will serve as conviction that this design will
work and produce marvelous results.

So, as I have illustrated in Figure (A) above, while Tesla’s patent # 723,188 is at
work and producing DC / AC pulses at extremely high potentials and high
frequencies, the stretching of the ether at the top half of the UFO and the
compressing of the ether at bottom half of the UFO will create two magnetic
fields – as per Tesla’s p2 system.

Now, here is where the propulsion of the UFO actually takes place… In that split
second during the current reversals, when the ether re establishes equilibrium,
the two magnetic fields created by the DC and AC pulses at the ends of the
spheroid conductors will collapse at the very focal points of the spheroid
conductors and repel. The net result will be a propulsive force in the upward
direction.

Note also as per this excerpt from Tesla’s autobiography:

Page 62 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

The ‘want for a prime-mover’ Tesla refers to is his turbine, so a Tesla Turbine as
well as the incorporation of the ‘spark gap’ is crucial in the design of this flying
machine.

As Tesla elegantly stated in his autobiography, the repelling of the two magnetic
fields was they key to Tesla’s flying machine that was ‘sustained and propelled
entirely by reaction’.

Page 63 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

Tesla’s Death Ray Machine


Boyd Bushman, a previous employee of Lockheed Martin had made a statement
that the Death Ray had already been developed by the American Government. He
also stated that he had the power to disarm or completely destroy the electronics
of a fighter jet sitting on the tarmac, simply by walking past the fighter jet with
his suitcase.

I took these statements of Boyd Bushman seriously.

I don’t know if I am crazy or not, but didn’t Tesla tell us that he had created the
death ray machine and that he could bring down a fleet of 250 airplanes and ‘zap’
soldiers in their tracks over 100 years ago?

This need not seem as extravagant or beyond comprehension. The creation of a


Death Ray Machine is simple, yet very dangerous.

To understand the physics behind the death ray machine, all we need to do is
revisit the chapter on Radiant Matter in ‘Figure 19: Heat Generated using
Concave Shape Cups’.

Here, Sir Crookes demonstrated how Radiant Matter produced heat when the
glass tube phosphoresced. He also demonstrated that the heat was intensified
when he used a cup-shaped negative pole and focused all of the Radiant Matter to
a focal point.

This is no different to focusing sun light using a convex lens or focusing the
magnetic fields using a concave-shaped electrical conductor. Coupled with the
vast power that you can generate from Tesla enormous Magnifying Transmitter,
the death ray machine can serve all countries well to protect them from the
missiles of enemies.

What’s more, as Sir Crookes demonstrated with the application of a magnet, you
can direct the death rays anywhere you desire.

Page 64 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

A Simple Death Ray Machine

This apparatus will produce a simple yet powerful death ray machine. With the
application of currents of high potential and high frequency, you can focus all of
the electrical vibrations to the focal point and down a fleet of 250 planes by
directing the death rays in their flight path.

Note that the death rays that Tesla had produced were merely electrical
vibrations created by a Tesla coil and focused to a single point to create the heat
using concave-shaped electrical conductors.

The focal point of the death ray machine can be changed to accommodate targets
of varying distances and with the use of a strong magnet, you can direct the
death rays – the heat – in any direction you desire.

Page 65 of 66
Understanding Nikola Tesla’s Work. By Konstantinos Pappas
konpappas@optusnet.com.au

References:
1. TESLA'S NEW MONARCH OF MACHINES, by Nikola Tesla
http://www.tfcbooks.com/tesla/1911-10-15.htm

2. Nikola Tesla Wiki quotes


http://en.wikiquote.org/wiki/Nikola_Tesla

3. HOW COSMIC FORCES SHAPE OUR DESTINIES, by Nikola Tesla


http://www.tfcbooks.com/tesla/1915-02-07.htm

4. ‘THE TRANSMISSION OF ELECTRIC POWER WITHOUT WIRES’


The Thirteenth Anniversary Number of the Electrical World Engineer, March 5,
1904.

5. Radiant Matter, by Sir William Crookes

6. Nikola Tesla autobiography

7. The Inventions, Researches and Writings of Nikola Tesla

Page 66 of 66

You might also like