This document calculates the minimum required thickness for the shell of a storage tank according to API 653 standards. It provides the dimensions of the tank, the material properties, and calculates the minimum thickness required for different height sections of the tank according to the equations in API 653. It then compares the calculated minimum to the actual measured thicknesses and notes they are all above the minimum required.
This document calculates the minimum required thickness for the shell of a storage tank according to API 653 standards. It provides the dimensions of the tank, the material properties, and calculates the minimum thickness required for different height sections of the tank according to the equations in API 653. It then compares the calculated minimum to the actual measured thicknesses and notes they are all above the minimum required.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document calculates the minimum required thickness for the shell of a storage tank according to API 653 standards. It provides the dimensions of the tank, the material properties, and calculates the minimum thickness required for different height sections of the tank according to the equations in API 653. It then compares the calculated minimum to the actual measured thicknesses and notes they are all above the minimum required.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
Memorial de Cálculo de espessura mínima do costado ( API 65
TAG D (m) 16.7 H (m) 14.20 Data ME Ant 1978
TQ-2026 D (ft) 54.79 Material ASTM A-283 Gr. C S (PSI) Ver Abaixo Esp. Min. Calc. "t" Esp. Min. Calc. "t" (mm) Limit Esp. API653 Esp Mínima Elev Esp. Nom. Alt. Anel (mm) Considerada Item 4.3.2.2 Encontrada Anel (m) Proj (mm) t = 2,6(H-1)DG / SE t = 2,6(HDG) / SE Mín. (mm) (mm) 2.50 0.00 12.50 8.23 8.41 4.21 4.93 2.50 2.50 9.50 6.75 6.93 3.47 7.56 2.50 5.00 7.95 4.79 4.95 2.54 5.58 2.50 7.50 6.35 3.45 3.61 2.54 4.64 2.50 10.00 6.35 2.10 2.26 2.54 4.25 1.39 11.39 6.35 0.76 0.92 2.54 4.08 0.31 11.70 6.35 0.01 0.17 2.54 3.31 OBSERVAÇÕES 1 - Os valores grifados em amarelo são relativos ao limite de 0.1 in para a espessura de qualquer anel conforme item mínima do costado ( API 653) S Y Data ME Atual 2008 G (Densidade) 1.000 1° E 2° 23595 30000 Camp (ANOS) 30 E (Tabela 4.2) 0.85 Aneis sup 25960 0.800 1° E 2° Espessura média Sobre esp. Sobre esp. Taxa de Vida útil mínima Encontrada Média Mínima Corrosão estimada 0.880 Aneis sup Mín. (mm) (mm) (mm) (mm) Anos 11.89 3.48 0.73 0.25 13.77 24000 1° E 2° 8.47 1.54 0.63 0.06 23.81 23595 1° E 2° 6.19 1.24 0.63 0.08 15.65 5.53 1.92 1.03 0.06 18.07 26400 Aneis sup 5.32 2.78 1.71 0.07 24.43 25960 Aneis sup 5.15 2.61 1.54 0.08 20.35 4.40 1.86 0.77 0.10 7.60
de qualquer anel conforme item 4.3.3.1
T 55000 0.429 1° E 2°
0.472 Aneis sup
01 2. The yield stress and tensile strength values shown are per API 653 for welded AST material of unknown origin. 3. This provision is for riveted tanks, constructed of any grade of material, evaluated per 4.3.4.1 of this standard. 4. This provision is for riveted tanks, constructed of known grades of material, evaluated per 4.3.4.2 of this standard. For all courses, the maximum allowable shell stress for both product and hydrostatic test conditions are listed under column for Allowable Product Stress, S. 5. This provision is for riveted tanks, constructed of unknown grades of material, evaluated per 4.3.4.2 of this standard. 1 6. The allowable stresses for reconstructed tanks are tabulated in API Std 650, Table 5-2 or calculated per 8.4 of this standard. 08 7. The allowable stresses are calculated per 4.3.3.1 and 4.3.3.2 of this standard, unless otherwise noted. The calculated allowable stresses are rounded to the nearest 100 lbf/in.2. hown are per API 653
known grades of all courses, the d hydrostatic test oduct Stress, S. unknown grades