Professional Documents
Culture Documents
htm
Product
Categories: Mechanical Bearing Fitting
Lubricants
Small and medium size bearings are generally mechanically mounted. Traditionally the
bearing is mounted using a hammer and a length of old pipe. This practice can cause
Lubrication forces to be transmitted through the rolling elements, causing damage to the raceways.
SKF fitting tools help prevent bearing damage by applying the forces to the bearing
ring with the interference fit.
Automatic Lubricators
Condition Monitoring Most bearings are fitted to their shaft or housing with one component having an
interference fit. For determining the correct fit, refer to the SKF General Catalogue, the
SKF Maintenance Handbook or consult an SKF application engineer.
Incorrect mounting
When bearings are mounted cold, care must be taken to ensure the drive-up forces are
applied to the ring with the interference fit. Damage and a resulting bearing failure can
occur if the mounting force is transmitted through the rolling elements causing damage
to the raceways.
Correct mounting
The correct way to minimise raceway damage is to use the specifically designed tools
1 of 2 12/12/2008 3:21 PM
Mechanical Bearing Fitting http://www.maintenanceproductsdirect.com/MechanicalBearingFitting.htm
from SKF, such as the TMFT 36 fitting tool kit. These tools allow drive-up forces to be
applied effectively and evenly to the component with the interference fit avoiding
raceway damage.
Bearings mounted on tapered seatings achieve their interference fit by being driven up
the tapered shaft. Care should be taken to ensure the bearing is not driven up too far,
as all the internal clearance may be removed and damage to the bearing is possible.
Bearing driven up the correct distance Bearing driven up too far and all
and the right clearance is achieved clearance removed; damage possible
2 of 2 12/12/2008 3:21 PM