Professional Documents
Culture Documents
Temperature display
Crescendo alarms
7
Daylight saving time option
SET
2 1
Setting the time, the calendars and the three alarms • The azan times for all cities around the world are
are almost the same. programmed or can be programmed in this clock.
Follow the steps below to set the time: To get the correct azan times, select your city code
and set the Gregorian calendar correctly.
NOTE When setting any number in the clock, that • Replace the Alkaline batteries when the ( LOW BAT )
number will be flashing. icon appear on the screen. In this case, the azan
sound becomes weak and starts skipping.
4 3
SELECTING A CITY SETTING THE CALENDAR
To select a city, look up the city International dialing The clock displays the Hijri or Gregorian calendar. To
telephone code (see page 17), and follow the steps toggle between the two calendars, press SET
below. To set the Gregorian (or Hijri) calendar, first make
sure that the desired calendar is displayed, then
follow the steps below:
If your city is not among the listed cities, follow the 4) Use or buttons to adjust
the year, then press SET
instruction on: www.alfajr.com/clock/newcity
5) Switch back to position.
6 5
8 7
1-DAY ALARM SETTING WEEKEND SETTING
In addition to fajr and daily alarms, this clock includes The daily alarm can be automatically disabled on
an extra alarm (1-day alarm) for one time appointment weekends. As per the following three options:
When this alarm is set, the other two alarm settings are Alarm rings days from Monday to Friday.
not affected.
Alarm rings days from Monday to Saturday.
The steps below illustrate the setting of the1-day alarm.
Alarm rings everyday (default).
To select one of these options:
NOTE After setting this alarm, the icon will NOTE If the weekend in the selected city is on
appear on the screen. To cancel this alarm, Thursday and Friday, means this alarm
press and hold the SET button for few doesn't rings on Thursday and Friday
seconds (you will hear a soft beep, and the and means it does not ring on Fridays.
. will disappear).
10 9
The complete azan for all prayers can be played at When the switch is turned ON, the clock will be in
snooze mode (and the icon will be displayed).
every azan time. The azan volume can be adjusted
using the azan volume switch. In this mode, when any alarm rings, pressing STOP
button makes the alarm ring again after five minutes
When the azan sound is turned OFF, the icon will (notice that the icon will be flashing).
not be displayed on the screen. If you wish to stop the alarm in this mode, you can press
and hold STOP button for few seconds. The soft beep
NOTE When any alarm is set at the time of any indicates that the alarm is stopped (notice also that the
icon will stop flashing).
azan, that azan sound will be disabled. In
particular, this shoud be considered when
setting Fajr alarm to ring exactly at Fajr NOTE Pressing STOP button for few seconds can
azan time. also be used to cancel all alarms coming
within the next 20 minutes.
AZAN TIMES
Arab World Local Taqweems To set the Daylight Saving Time for any city (except
Indian sub-continent Islamic Scientific University cities in the Arabian peninsula), press and hold the ,
North America ISNA button for few seconds. You will notice that the current
Europe & Other Countries Islamic World Organization time and the azan times are increased by one hour.
Also note that the icon will appear on the right
side of the screen.
NOTE To change the pre-programmed taqweem
for your city, follow the steps on the next To get back to standard time, press and hold button
page. for few seconds. The icon will disappear and the
time and all azan times will decrease by one hour.
12 11
AZAN SAFETY TIME AZAN TIME CALCULATION
As needed, any azan time can be adjusted forward or Fajr and Isha times are calculated by either an angle of
backward by a fixed number of minutes, as follows: the sun below the horizon or by an interval of time.
• Press and hold SET
• Move the switch to position, then release SET This clock is programmed to use the local method or
• Use or to set the safety time for fajr azan. Notice the most widely used system for your city. However,
that “Fajr” icon is flashing. you can change to another system, as follows:
• Press SET to adjust Shuroq safety time, ... etc. Selecting Hanafi method for Asr:
• When finished, return switch back to position.
Press and hold SET while moving the switch to .
NOTE After selecting any city, the safety times are all position, then release SET . Use or to select H
reset, and need to be re-adjusted if needed. (which means Hanafi) or which means regular Asr
time. Notice that Asr azan time will be flashing (and
changing) during Hanafi setting mode.
Selecting Fajr and Isha calculation methods:
PROGRAMMING NEW CITY
Press and hold SET then move the setting switch to the
You can program any location around the world in this position then release SET and press it again.
clock. If your city is already among the listed cities, then
follow the steps on page 6 . Use or to select the desired system as follows:
To program other locations around the world, refer to: Local taqweem
www.alfajr.com/clock/newcity World Islamic League
ISNA (Islamic Society of North America)
Example: To program Lausanne city in Switzerland Fajr time is 1:30 hours before Shuroq and
which is 2 minutes before Geneve azan times:
Isha time is 1:30 hours after Magrib.
1) Select Geneve city code (which is "41-22").
2) Adjust all azan safety times by (-2) minutes. NOTE After selecting another city, the clock will be
reset to use the original programmed
NOTE If Fajr, Asr, or Isha azan times are not correct, taqweem for the newly selected city.
select the appropriate taqweem system.
14 13
Q: Azan times are not correct. Why? The Hijri calendar in this clock is calculated based on
A: Make sure you have correctly set the following:
the astronomical moon sighting at Makkah. Accordingly,
a) city code, b) Gregorian calendar, c) Day light
saving time option, d) Taqweem system (azan It is re-calculated after setting the Gregorian calendar.
time calculation methods).
This unique feature helps to determine the Gregorian
Q: Can other cities be programmed in this clock? dates for the corresponding Hijri-based Islamic events.
A: Yes, any location can be programmed (page 14). For example, to know when is Eid Al-Fitr for the year
Q: How can I set the daily alarm so that it will not ring 1426, set the Gregorian date to 3/11/2005, then check
on Sundays? whether the calculated Hijri date is 1/10/1426 or not.
A: Follow the weekend setting on page 9 and select
the little symbol in step 2.
16 15