Professional Documents
Culture Documents
Hardener:
Multimix 2K Hardener Multimix 2K Hardener Fast Multimix 2K Filler Hardener Multimix 2K Special Hardener Multimix EP Hardener
Description:
Multimix offers a wide selection of hardener components and allows the perfect tuning of Multimix paint systems for different purposes and also a special adaptation to two-component equipments.
MMIX-GB
Version 00
6 30
1/4
Multimix Hardener
Field of application:
1.
Multimix 2K Hardener Hardener for ready for use adjustment of paint without additional thinner (e.g. for 2K equipment).
2.
Multimix 2K Hardener Fast The UV-resistant standard hardener for weather resistant top coats; due to its composition it provides quicker surface and through drying than the 2K Special Hardener.
3.
Multimix 2K Filler Hardener This hardener was especially developed for the Multimix 2K Primer High Build. It offers a fast through drying and is ideally suited for use on iron/steel. On difficult substrates such as non-ferrous metals, aluminium and deep-drawn parts Multimix 2K Special Hardener should be used.
4.
Multimix 2K Special Hardener The UV-resistant hardener for Multimix 2K Primer High Build and topcoats, where usage of the same hardener is required for undercoat and topcoat.
5.
Multimix EP Hardener This is an amine-containing hardener and only intended for the Multimix EP Topcoat.
MMIX-GB
Version 00
6 30
2/4
Multimix Hardener
Mixing ratio:
Hardener
Multicryl
Topcoat EP
Topcoat UNICRYL
2K Hardener
Volume / weight
4:1 / 7:1
10:1
2K Special Hardener
Volume / weight
10:1
9:1 / 10:1
EP Hardener
Volume / weight
5:1 / 7:1
Hardener
Topcoat PUR-MATT
2K Hardener
3:1
2K Hardener Fast
Volume / weight
5:1
6:1 / 7:1
5:1
2K Filler Hardener
Volume / weight
2K Special Hardener
Volume / weight
4:1 / 5:1
EP Hardener
Volume / weight
MMIX-GB
Version 00
6 30
3/4
Multimix Hardener
Data:
Density
Solids
2K Hardener
0.96 g/cm3 1.07 g/cm3 1.14 g/cm3 1.05 g/cm3 0.92 g/cm3
65.8 % by weight
2K Hardener Fast
75.8 % by weight
2K Filler Hardener
67.0 % by weight
2K Special Hardener
74.9 % by weight
EP Hardener
51.0 % by weight
For professional use only. The information provided in this documentation has been carefully selected and arranged by us. It is based upon our best knowledge on the subject at the date of issuance. The Information is given for information purposes only. We are not liable for its correctness, accuracy and completeness. It is up to the user to check the information with regard to up-to-dateness and suitability for his intended purpose. The intellectual property in this Information, including patents, trademarks and copyrights, is protected. All rights reserved. The relevant Material Safety Data Sheet and Warnings displayed on the product label need to be observed. We may modify and/ or discontinue operation of all or portions of this Information at any time in our sole discretion, without notice and assume no responsibility to update the Information. All rules set forth in this clause shall apply accordingly for any future changes and amendments.
6 30 4/4 Germany