Professional Documents
Culture Documents
Review
Access is associated with the call setup success rate of the network. This KPI can be optimized by means of Call setup test and the consequent trouble-shooting based on access failure analysis.
Objectives
Be
familiar
with
the
access
Course Contents
Access problem analysis process Common reasons for access problems Case study
Definition of access failure Call setup succeeds when the call setup phase is completed (when CC Connect is received). If the call fails to reach the CC Connect stage, it should be pegged as an access failure .
Course Contents
Access problem analysis process Common reasons for access problems Case study
Coverage analysis
Signaling analysis
Course Contents
Access problem analysis process Common reasons for access problems Case study
RF reasons
Poor coverage
Other reasons
Data configuration problems
Course Contents
Access problem analysis process Common reasons for access problems Case study
Case study
Access failure due to synchroni-za tion failure Access failure during RB setup Access failure during handover pr ocess Access failure due to terminating UE
Case study
Access failure due to synchroni-za tion failure Access failure during RB setup Access failure during handover pr ocess Access failure due to terminating UE
Case study
Access failure due to synchroni-za tion failure Access failure during RB setup Access failure during handover pr ocess Access failure due to terminating UE
Case study
Access failure due to synchroni-za tion failure Access failure during RB setup Access failure during handover pr ocess Access failure due to terminating UE
Summary
Access process is complicated since different devices are involved and scenario varies. Careful study from signal distribution to signaling procedure makes things easy. Examples above are derived from tests carried out before, which give general idea of trouble shooting, advanced researches will be supplemented. .