Professional Documents
Culture Documents
Copyright 2005, 2011 Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be errorfree. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
Contents
Chapter 1: Chapter 2:
About Using Siebel Reports Who Can Use Siebel Reports? About Oracle BI Publisher
About Using Oracle Business Intelligence Publisher Add-in for Microsoft Word with Siebel Reports 24
Chapter 3:
Workflow for Generating Reports in Connected Mode Siebel Reports Directory Structure Siebel Reports File Types 32 31
About the Oracle BI Publisher Server in Siebel Business Applications How Siebel Business Applications and Oracle BI Publisher Interact
32 33
Chapter 4:
About Integrating Oracle BI Publisher with Siebel Business Applications About Upgrading Siebel Reports Where to Find Documentation for Previous Versions of Siebel Reports Requirements for Using Siebel Reports
Contents
Preparing for Integration of Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications 44
Installing Oracle Business Intelligence Publisher Enterprise for Integration with Siebel Business Applications 44 Installing Oracle Business Intelligence Publisher Add-in for Microsoft Word 46 Copying JAR Files to the Oracle BI Publisher Server 47 Disabling External File References on the Oracle BI Publisher Server 48 Starting and Stopping OC4J and Oracle BI Publisher 49
43
50 50 51 52 53
Configuring an Outbound Web Service for the Siebel Application Enabling Siebel Server Components for Siebel Reports About Security and Authentication for Siebel Reports
Setting Up and Enabling the Siebel Security Model for Siebel Reports 53 Configuring Security and Authentication for Siebel Reports Using LDAP 58 Configuring Siebel Reports in a Web Single Sign-On Environment 58
Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server
58
Uploading Preconfigured Report Layout Templates to the Oracle BI Publisher Server 60 Process of Enabling and Configuring Report Scheduling 61
Setting Up the Database Schema for the Oracle BI Publisher Server 61 Configuring the Data Service WSDL for the Oracle BI Publisher Server 62 Verifying Symbolic URL Arguments That Embed the Oracle BI Publisher Scheduling Views in the Siebel Application 63
Testing Your Siebel Reports Integration Configurations Roadmap for Upgrading Siebel Reports 65
64
66
Chapter 5:
Deploying Report Layout Templates to the Siebel Web Client from a Disconnected Client 69 Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments 70 Automatically Purging Reports from the Siebel File System 71 72 73 Purging Scheduled Reports from the Oracle BI Publisher Server
Changing the Location of the Oracle BI Publisher Repository for Siebel Reports
Contents
Changing the Location of the Oracle BI Publisher Repository by Creating a Custom XML File 73 Changing the Location of the Oracle BI Publisher Repository by Replacing a JVM Property Name 74 Changing the Location of the Oracle BI Publisher Repository by Changing the Absolute Path to the Repository 75
75 75 78
Example of Uploading Multilingual Reports to the Siebel Application Adding and Deleting Languages from Report Templates About Report Translation 80 80 81 79
Roadmap for Optimizing the Performance of Siebel Reports Setting the Report Execution Waiting Period for Reports
Setting the Server Request Processor Database Polling Interval for Siebel Reports 82 Setting Concurrency Parameters for Siebel Reports 82 Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes 84
Enabling Scalable Mode for Siebel Reports 84 Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports 86 Increasing EAI HTTP Transport Sleep Time for Siebel Reports 87
Chapter 6:
Generating Reports
89 90 94 94
97
Chapter 7:
Creating Reports
99
Siebel Reports Guide Version 8.1, Rev. D 5
Contents
About Reporting Across Multiple Siebel Business Objects About Registering and Sharing Report Layout Templates About Multiorganizational Report Templates 104
Scenario for Report Template Visibility Across Organizations Process of Creating Custom Reports 106
Extending Integration Objects to Add New Fields for Siebel Reports 109 Creating New Integration Objects for Siebel Reports 110 Generating Sample XML Data Files for Siebel Reports 112 Creating Report Layout Templates Using Oracle Business Intelligence Publisher Add-in for Microsoft Word 113 Registering Report Layout Templates 114 Adding Multiple Integration Objects to a Report 117 Sharing Report Layout Templates 118 Defining Report Layout Templates for Selected Records 119 Associating Registered Reports with Siebel Application Views 120 Changing the Report Sequence Order in the Reports Menu 120
Chapter 8:
Scheduling Reports
123 126 128 124 127
Example of Scheduling an Opportunity Report Monitoring and Viewing Scheduled Reports Deleting Scheduled Reports 129 Suspending and Resuming Scheduled Reports
Chapter 9:
Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template 132 Creating a Master-Detail Layout Template in Microsoft Word 136
Contents
140
Packaging the Report Files in the Source Environment 140 Migrating the Report Files to the Target Environment 141 Packaging Report Database Records in the Source Environment 142 Migrating Report Database Records to the Target Environment 143
144 145
About Referencing Parameters in the Report Layout Template About Defining Report Parameters in the Siebel Application About Report Parameter Validation 152 152 153 155 Process of Creating Parameterized Reports
Defining Report Parameters in the Siebel Application Example of Generating a Parameterized Report
Guidelines for Resolving Class Not Found Errors When Previewing Reports in Microsoft Word 160 Resolving Class Not Found Errors When Previewing Reports in Microsoft Word Troubleshooting Error Messages for Siebel Reports 162 161
Index
Contents
Table 1. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. D Description New chapter. It provides updated content and reorganized topics to reflect the latest integration and configuration tasks. Modified chapters. They reflect the latest report features and topics have been reorganized accordingly. New topic. Reports access is based on standard Siebel responsibility-based visibility as well as access granted by others. New topic. It describes the Oracle BI Publisher, OC4J (Oracle Application Server Containers for Java Platform, Enterprise Edition), and Oracle BI Publisher Add-in for Microsoft Word (also known as Oracle BI Publisher Desktop). Modified topic. The naming convention for XLIFF files requires that all languages have the same file name as the report layout template, only the extension differs. New topic. Provides an overview of Siebel Reports upgrades. New topic. It provides a high-level roadmap for integrating Oracle BI Publisher with Siebel Business Applications. Modified topic. You replace the existing address of the Service Ports subview with the URL used to access the EAI Object Manager. New topic. Describes the various security models available for Siebel Reports. New topic. It provides instructions for upgrading to the latest Siebel Reports features.
Chapter 4, Integrating Oracle BI Publisher with Siebel Business Applications Chapter 8, Scheduling Reports Chapter 11, Parameterized Reports About Controlling Access to Reports on page 23 About Oracle BI Publisher on page 24
Siebel Reports Directory Structure on page 31 About Upgrading Siebel Reports on page 38 Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications on page 40 Setting Up and Enabling the Siebel Security Model for Siebel Reports on page 53 About Security and Authentication for Siebel Reports on page 52 Roadmap for Upgrading Siebel Reports on page 65
Table 1. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. D Description New topic. It describes how to upload multilingual reports to a Siebel application. Modified topic. Added a caution that each translated report must have a unique name, otherwise errors can occur. New topic. It describes how to set the default report language and locale by setting user preferences. New topic. It describes the logic for how an organizationspecific report template appears in the Reports menu. New topic. It provides an example of how you might use report template visibility across organizations. New topic. It describes how to suspend and resume scheduled reports. New topic. It provides an example of using a master-detail report.
Example of Uploading Multilingual Reports to the Siebel Application on page 78 About Report Translation on page 80 Setting Language and Locale User Preferences for Reports on page 97 About Multiorganizational Report Templates on page 104 Scenario for Report Template Visibility Across Organizations on page 105 Suspending and Resuming Scheduled Reports on page 128 Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template on page 132 Syntax and Description of the Fields for an Example Template on page 134 About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152
New topic. It provides additional information for the example of using a master-detail report. Modified topic. It describes how parameterized reports are generated. New topic. It provides a description of the report parameter types and attributes. New topic. It provides information about parameter definitions and how to use them. New topic. It provides an overview for checking for report parameter inconsistencies between the report layout template and definitions for the template in the Siebel application. New topic. It provides instructions for defining report parameters. New topic. It describes how to define report parameters in the Siebel application. The parameters govern how the reports appear so that users have options when generating reports.
Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153
10
Additional Changes This version of Siebel Reports Guide includes: The following screen names and other user interface (UI) elements have changed:
The Administration - BIP Reports screen is now the Administration - BI Publisher Reports screen. The BIP Reports Server is now BI Publisher Reports. The Purge Administration view is no longer available in the UI. The My Jobs view is now the Scheduled Reports view. The Report Template Registration view is replaced with two new template views:
The Generate Sample Data File button in the Integration Objects list of the template views is now Generate Sample XML. Start Date and End Date replace Active Start Date and End Date, respectively.
All Template View is now All Report Template View Managers Template View is now Managers Report Template View
Several topics in Chapter 4, Integrating Oracle BI Publisher with Siebel Business Applications were relocated to either other chapters or 880452.1 (Article ID) Siebel Maintenance Release Guide on My Oracle Support. The procedures in Chapter 4, Integrating Oracle BI Publisher with Siebel Business Applications now indicate which steps are applicable to a first-time installation or upgrades (or both). The following topics were relocated to Chapter 5, Administering Siebel Reports:
Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments on page 70 Changing the Location of the Oracle BI Publisher Repository for Siebel Reports on page 73 Copying Fonts for Report Generation on page 75
Updated diagram and steps in Generating Reports on page 92. You can generate reports in MHTML (MIME HTML) format in connected mode only. A diagram was added to Process of Creating Custom Reports on page 106. Mentions of upgrading to Siebel CRM version 8.1.1.1 from Siebel CRM version 8.1.1 were removed because they are no longer applicable.
11
Table 2. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. C Description Modified chapters. Topics in these chapters were modified to reflect the new user interface that allows for sharing of reports and includes other new features. Modified topic. Access control to generated reports is based on standard Siebel responsibility-based visibility. Modified topic. Two additional JAR files must be copied. Modified topic as follows: Added a note advising that the path of the JVM DLL Name parameter is automatically read from the Windows registry. Corrected the JVL DLL Name setting for UNIX. Corrected the path for the LIBPATH environment variable for UNIX. Corrected the JVM classpaths for UNIX and Windows.
Chapter 6, Generating Reports Chapter 7, Creating Reports Chapter 8, Scheduling Reports About Using Siebel Reports on page 12 Copying JAR Files to the Oracle BI Publisher Server on page 37 Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server on page 56
Configuring Security and Authentication Using the Siebel Security Model on page 67 Configuring Security and Authentication Using the LDAP Security Model on page 70 Configuring Siebel Reports in a Web Single Sign-On Environment on page 71 Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments on page 78 Purging Reports from the Siebel File System on page 66 Automatically Purging Reports from the Siebel File System on page 59
Modified topic. You replace the existing address of the Service Ports subview with the URL used to access the EAI Object Manager. Modified topic. Replaced procedure with a cross reference to 974509.1 (Article ID) on My Oracle Support. New topic. It describes how to configure Siebel Business Applications and Oracle BI Publisher in a Web Single Sign-On (SSO) environment. New topic. It describes how to register new or modified report definitions for multiple Siebel Server environments. Removed topic. This feature is no longer applicable. New topic. It provides instructions for administrators to set up an automated process for purging reports from the Siebel File System.
12
Table 2. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. C Description New topic. It describes how Siebel Reports determines the report language at run time. New topic. It describes report translation. Modified topic. Added an optional step to the procedure. Modified topic. Added a note advising this chapter is not applicable to scheduled reports. Modified topic. Access to reports is based on standard Siebel responsibility-based visibility. Modified topic. You can choose a different language and locale rather than accept the default choices when generating a report. Modified topic. You can: Grant others access to your reports. Select multiple records when generating reports. Override the default report language and locale settings.
About Working with Multilingual Reports on page 63 About Report Translation on page 65 Designing Multilingual Reports on page 65 Chapter 6, Generating Reports About Generating Reports on page 75 Workflow for Generating Reports on page 77 Generating Reports on page 80
New topic. It describes how to override the default report language and locale by setting user preferences.
Additional Changes This version of Siebel Reports Guide includes: The following screen names and other user interface (UI) elements have changed:
The Administration - BIP Reports screen is now the Administration - BI Publisher Reports screen. The BIP Reports Server is now BI Publisher Reports. The Purge Administration view is no longer available in the UI. The My Jobs view is now the Scheduled Reports view. The Report Template Registration view is replaced with two new template views:
The Generate Sample Data File button in the Integration Objects list of the template views is now Generate Sample XML.
13
Table 3. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. B Description Added a caution about not modifying parameters for the XMLP Report Server component. New topic. It provides pointers to integration instructions for other releases of Siebel Reports. New topic. It provides prerequisites before deploying Siebel Reports. New title for topic. Modified topic to reflect high-level integration tasks. New topic. It consolidates several of the Oracle BI Publisher installation and configuration tasks previously located elsewhere in this guide. Modified topic: Added a note to make it clear that the instructions are for a first-time installation rather than an upgrade from a previous version. Removed the optional step of downloading the Business Intelligence Suite Enterprise Edition Documentation Media Library. Added a step to have users download Oracle BI Publisher Desktop.
Workflow for Generating Reports in Connected Mode on page 18 Where to Find Documentation for Previous Versions of Siebel Reports on page 28 Requirements for Using Siebel Reports on page 28 Preparing for Integration of Oracle BI Publisher with Siebel Business Applications on page 33 Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications on page 34 Installing Oracle Business Intelligence Publisher Enterprise for Integration with Siebel Business Applications on page 34
New topic. It describes how to upgrade Oracle BI Publisher to version 10.13.4.1 from 10.1.3.4.0. The content was relocated from Appendix C and rewritten to correct inaccuracies and to differentiate from a first-time installation. Modified topic to remove steps for enabling external file references because those steps belong to another task. New topic. It describes how to enable external file references on the Oracle BI Publisher Server.
Copying JAR Files to the Oracle Publisher Server Disabling External File References on the Oracle BI Publisher Server on page 38
14
Table 3. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. B Description Modified topic: The tasks in this process were added, removed, and reorganized, as needed. Step 3 of the process was rewritten to make sure the XMLP Report Server component is enabled and a caution was added about not changing this components parameters.
Process of Configuring the Siebel Application for Integration with Oracle BI Publisher on page 53
Process of Authenticating User Access to the Oracle BI Publisher Server on page 66 Testing Your Siebel Reports Integration Configurations Deploying Report Layout Templates to the Siebel Web Client from a Disconnected Client on page 57 Purging Scheduled Reports from the Oracle BI Publisher Server on page 60 Setting the Report Execution Waiting Period for Reports on page 67 Enabling Scalable Mode for Siebel Reports on page 70 Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports on page 72 Monitoring the Status of Currently Generating Reports on page 82 Extending Integration Objects to Add New Fields for Siebel Reports on page 97 Scheduling Reports on page 112
Tasks were added, removed, and reorganized as needed. Subtopics were also rewritten. New topic. It provides instructions for testing your configurations. New topic. It provides instructions for moving reports from a disconnected client to a Siebel Web Client so that reports are available for generation in connected mode with the Oracle BI Publisher Server. Modified topic to make it clear that the purging instructions are for scheduled reports. Modified topic to reflect that this task is applicable to performance optimization of reports with more than 100 records rather than 2000 records. Corrected directory path in Step 1 of the procedure. Corrected directory path in Step 1 of the procedure.
Added a tip about the timestamp of a report. New topic. It describes how to extend an integration object to add a new field to a report. Added a note at the end of the procedure advising that the My Jobs view is an embedded Web page from the Oracle BI Publisher Enterprise application. Removed the last paragraph in the topic. No preconfigured parameterized reports ship with Siebel Business Applications.
15
Table 3. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. B Description Corrected the procedure.
Enabling Debugging for Siebel Reports in Disconnected Mode on page 145 Troubleshooting the CLASSPATH Settings Using Siebel Server Manager on page 155
Additional Changes Replaced references to Oracle application servers with ORACLE_HOME. Replaced references to the Oracle BI Publisher installation directory with ORACLE_HOME/oc4j_bi. Replaced references to OracleMetaLink 3 with My Oracle Support. Retitled Chapter 4, Integrating Oracle BI Publisher with Siebel Business Applications to clarify that tasks are integration tasks rather than installation and configuration tasks. Also made structural changes to the content, including:
Topic additions, deletions, renaming, and reorganization Revisions to procedures New and revised index entries
Added new requirements for implementing Siebel Reports. Modified steps in roadmap for integrating Oracle BI Publisher with Siebel Business Applications. Provided a better example for the Configuring the Outbound Web Service for the Oracle BI Publisher Server topic. Reworded note at the end of the Enabling Scalable Mode for Siebel Reports topic for clarity.
Table 4. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. A Description Modified chapter. It describes how to install and configure Siebel Reports version 8.1.1.1. Modified topic. It describes how to install Oracle Business Intelligence (BI) Publisher version 10.1.3.4.1.
Chapter 4, Installing and Configuring Siebel Reports Installing Oracle BI Publisher for Siebel Business Applications on page 31
16
Table 4. Topic
New Product Features in Siebel Reports Guide, Version 8.1, Rev. A Description New topic. It describes how to purge reports permanently in the Oracle BI Publisher repository. Modified topic. Added a note about not executing reports with large data volumes as an immediate report request.
Purging Reports in the Oracle BI Publisher Server on page 51 Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes on page 57 Enabling Scalable Mode for Siebel Reports on page 58 Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports on page 60 Increasing EAI HTTP Transport Sleep Time for Siebel Reports on page 60 Chapter 7, Scheduling Reports Chapter 9, Using Master-Detail Reports Chapter 10, Parameterized Reports Resolving Class Not Found Errors When Previewing Reports in Microsoft Word on page 118 Appendix B, Report Business Service Appendix C, Upgrading to Siebel Reports Version 8.1.1.1
Modified topic. Added a note advising when not to enable scalable mode. New topic. It describes how to configure a temporary directory on the Oracle BI Publisher Server for use with complex reports. New topic. It describes how to increase the default sleep time to improve performance when generating complex reports or against large data sets. New chapter. It describes how to schedule reports to run at a later date and with recurring frequency. New chapter. Content in this chapter was relocated from Chapter 5, Administering Siebel Reports. New chapter. It provides the additional tasks you must perform when creating parameterized reports. New topic. It describes how to resolve errors encountered when previewing reports in Microsoft Word. New appendix. It describes the Report Business Service and how it is used. New appendix. It describes how to upgrade to Siebel Reports version 8.1.1.1.
Additional Changes This version of Siebel Reports Guide includes: Several new preconfigured reports are available in this release. For a comprehensive list of the preconfigured reports that ship with Siebel Business Applications, see 876284.1 (Article ID) on My Oracle Support. Changes made throughout the guide to reflect the new features and functionality for the current release of Siebel Reports. Structural changes to the content, such as topic organization and heading arrangement, revisions to procedures, and an expanded index.
17
Table 5. Topic
New Product Features in Siebel Reports Administration Guide, Version 8.1 Description New chapter. It describes Siebel Reports. New chapter. It describes the Siebel Reports architecture and report generation, the Oracle BI Publisher Server, and how Oracle Business Intelligence Publisher (Oracle BI Publisher) interacts with Siebel Business Applications. New chapter. It describes the preinstallation, installation, and postinstallation tasks for Siebel Reports. New chapter. It describes how to purge reports and create multilingual reports. New chapter. It describes how to run Siebel Reports from a user perspective. New chapter. It describes the report layout templates, integration objects, and master-detail reports. New chapter. It describes how to migrate reports from one environment to another (applicable only to disconnected clients). New appendix. It describes how to enable logging for the various components of Siebel Reports, and how to respond to error messages.
Chapter 6, Administering Siebel Reports Chapter 8, Running Reports Chapter 9, Creating Reports
Additional Changes Removed all Actuate-related chapters and content. For information about integrating Siebel reports with Actuate, see Siebel Reports Administration Guide version 8.0 on the Siebel Bookshelf. NOTE: The Siebel Bookshelf is available on Oracle Technology Network (OTN), Oracle E-Delivery, or it might be installed locally on your intranet, or on a network location. Reports and the Reports Menu are no longer available in Siebel Tools. Siebel Reports are now accessed using the application views in the Siebel clients. Several reports are no longer available. Of particular note, the following reports are no longer available:
Application Upgrade Object List. Provided object differences between repository versions.
18
Application Upgrade Attributes List. Provided attribute differences between repository versions.
NOTE: The data provided in these reports is still accessible using the Screens menu. For more information about using the Screens menu, see Using Siebel Tools. The following reports have been relocated to the application administration views in the Siebel clients instead of Siebel Tools:
Tables. Provides selected properties and lists the columns for each table. For more information about the Tables report, see Siebel Data Model Reference.
EIM Interface Tables. Provides various properties for each EIM interface table. For more information about the EIM Interface Tables report, see Siebel Enterprise Integration Manager Administration Guide.
Siebel System Requirements and Supported Platforms on Oracle Technology Network (OTN). Siebel Business Applications Third-Party Bookshelf is available on Oracle E-Delivery. Other Siebel CRM documentation (Release Notes, Maintenance Release Guides, Alerts, Technical Notes, Troubleshooting Steps, FAQs, Error Messages) is located on My Oracle Support.
19
20
The reporting module for Siebel Business Applications is Oracle Business Intelligence Publisher (Oracle BI Publisher). This chapter provides a brief introduction to Siebel Reports and the reporting tools used to create reports. It includes the following topics: About Siebel Reports on page 21 About Using Siebel Reports on page 22 Siebel Reports Output File Types on page 22 Who Can Use Siebel Reports? on page 23 About Controlling Access to Reports on page 23 About Oracle BI Publisher on page 24 About Using Oracle Business Intelligence Publisher Add-in for Microsoft Word with Siebel Reports on page 24
21
NOTE: The PPT and MHTML report output file types are available only in connected mode. For more information about the connection modes in relation to Siebel Reports, see About the Siebel Reports Architecture on page 27. The report output file types that are available to you for a specific report are determined by the report developer when registering a report in the Siebel application. For more information about registering reports, see Registering Report Layout Templates on page 114.
22
23
About Using Oracle Business Intelligence Publisher Add-in for Microsoft Word with Siebel Reports
Oracle Business Intelligence Publisher Add-in for Microsoft Word (also known as Oracle BI Publisher Desktop) is an authoring tool that allows you to use native formatting features of Microsoft Word to design layout templates for reports. The application includes documentation, demos, and samples. NOTE: Siebel Reports allows you to use a subset of the functionality and features the Oracle BI Publisher Desktop provides. Only the features documented in this guide are supported. Oracle Business Intelligence Publisher Add-in for Microsoft Word provides separate layout, query, and language capability in one interface. Because data logic is separate from the layout, and the layout is not dependent on the needs of a particular language, this feature allows for flexibility in deployment and reduced maintenance costs.
24
Overview of Siebel Reports About Using Oracle Business Intelligence Publisher Add-in for Microsoft Word with Siebel Reports
When you open Microsoft Word after installing Oracle Business Intelligence Publisher Add-in for Microsoft Word, the Oracle BI Publisher menu toolbar appears, as shown in Figure 1.
Figure 1.
For information about installing Oracle Business Intelligence Publisher Add-in for Microsoft Word, see Installing Oracle Business Intelligence Publisher Enterprise for Integration with Siebel Business Applications on page 44. NOTE: It is recommended that you not use Oracle BI Publisher Desktop version 10.1.3.4.1 with Oracle BI Publisher version 10.1.3.4.0.
Advantages of Using Oracle Business Intelligence Publisher Add-in for Microsoft Word as a Report Authoring Tool
Advantages of using Oracle Business Intelligence Publisher Add-in for Microsoft Word for creating layout templates and customizing reports include: Users can build the layout and rules for reports themselves or reuse their existing company documents. Even if your users do not have the skills to create their own layout templates, they can begin creating the template in Microsoft Word. Then the report developer can use that same document to finalize the template and report. Deployment is more efficient, because users can build the report that they want without having to depend on an engineer to interpret their requirements. Testing cycles are reduced because users can implement changes to the report rather than tying up valuable development resources. Report developers can concentrate on extracting only data. Report developers can extract data from diverse sources. Both report developers and report administrators can build and maintain reports. Interoperability with other standards-based reporting engines, such as Oracles enterprise reporting tool that is used in Oracle E-Business Suite, PeopleSoft, JD Edwards, BI EE (Business Intelligence Suite, Enterprise Edition Plus), and so on.
25
Overview of Siebel Reports About Using Oracle Business Intelligence Publisher Add-in for Microsoft Word with Siebel Reports
Export the results of a report query to an Excel spreadsheet Log in to Oracle Business Intelligence Publisher Add-in for Microsoft Word from Excel to refresh your data, apply new parameters, and apply a template to the report data Create templates in Excel, upload them to the Oracle BI Publisher repository, and then access and generate reports from an Excel session
NOTE: The Analyzer for Excel feature is available only in connected mode. For more information about the connection modes in relation to Siebel Reports, see About the Siebel Reports Architecture on page 27. For more information about using Oracle Business Intelligence Publisher Add-in for Microsoft Word, see Oracle Business Intelligence Publisher Report Designer's Guide available on Oracle Technology Network (OTN). NOTE: Not all features mentioned in the Oracle Business Intelligence Publisher documentation are currently integrated in the Siebel Reports solution; only the features documented in this guide.
26
This chapter describes the Siebel Reports development environment and how Siebel Reports interacts with Oracle Business Intelligence Publisher (Oracle BI Publisher) to generate reports in Siebel Business Applications. It includes the following topics: About the Siebel Reports Architecture on page 27 Workflow for Generating Reports in Connected Mode on page 28 Workflow for Generating Reports in Disconnected Mode on page 29 Siebel Reports Directory Structure on page 31 Siebel Reports File Types on page 32 About the Oracle BI Publisher Server in Siebel Business Applications on page 32 How Siebel Business Applications and Oracle BI Publisher Interact on page 33
27
Siebel Reports Development Environment Workflow for Generating Reports in Connected Mode
Figure 2.
Siebel Reports Architecture and Workflow for Generating Reports in Connected Mode
1 2 3
A report generation event is triggered from a Siebel application view. The Siebel Application Object Manager (AOM) routes the event to the Siebel Database. The Server Request Broker (SRBroker) and the Server Request Processor (SRProc) monitor the request and pass it to the XMLP Report Server component through the XMLP Driver Service.
28
Siebel Reports Development Environment Workflow for Generating Reports in Disconnected Mode
4 5 6 7 8 9
The XMLP Driver Service makes a call to the XMLP Data Service. The XMLP Data Service fetches data from the Siebel Database through the EAI Siebel Adapter, and then returns the control back to the XMLP Data Service. The XMLP Data Service passes control back to the XMLP Driver Service. The XMLP Driver Service makes a call to the XMLP Adapter Service. The XMLP Adapter Service makes a call to the proxy PublicReportService business service. The proxy PublicReportService business service makes a Web service call to the Oracle BI Publisher Server. binary data by way of a Web service call back to the proxy PublicReportService business service.
10 The Oracle BI Publisher Server executes report generation and returns the generated report 11 The proxy PublicReportService business service returns control to the XMLP Adapter Service. 12 The XMLP Adapter Service then downloads the report, and creates the file in the Siebel File
System, which is displayed in the Siebel application.
29
Siebel Reports Development Environment Workflow for Generating Reports in Disconnected Mode
Figure 3 illustrates both the architecture and workflow for generating reports in disconnected mode. NOTE: Oracle BI Publisher was previously known as XML Publisher or XMLP. For this reason, some software elements retain the XMLP naming convention.
Figure 3.
Siebel Reports Architecture and Workflow for Generating Reports in Disconnected Mode
1 2 3 4 5
A report generation event is triggered from a view in the Siebel application. Data is retrieved from the Siebel Database using the EAI Siebel Adapter and stored as XML in the XMLP\DATA folder in the Siebel client installation (SIEBEL_CLIENT_ROOT\CLASSES) directory. A call is routed to the XMLP Report Java Business Service. The XMLP Report Business Service instantiates the EAI Java Business Service, and loads the JAR files to the JVM (Java Virtual Machine). The Oracle BI Publisher XDO Engine loads the XDO classes from the JAR files, and then the XML, XLIFF, and XSL template are given as input to the XDO classes for generating the report. The report is temporarily stored in XMLP\REPORTS, and then sent to the Siebel File System. The control then goes back to the Siebel user interface where the generated report appears.
30
Table 6.
Siebel Reports XMLP Directory Structure Description Contains the generated XML files from the integration object definition. Contains the prepackaged .ttf (TrueType format) font files. NOTE: The administrator must copy the font files from the C:\WINDOWS\Fonts directory to the $JRE_HOME\fonts directory to make sure that reports are displayed and print properly. For more information about copying font files, see Copying Fonts for Report Generation on page 75.
\REPORTS \TEMPLATES
Contains the temporary files for generating reports. Contains the RTF (Rich Text Format) layout templates. Users can download these report files to a local drive. This directory also contains the XSL files necessary for disconnected mode. For information about how these files are used for generating reports, see How Siebel Business Applications and Oracle BI Publisher Interact on page 33.
\xliff\lang
Contains the XLIFF files for localization. XLIFF is the XML format for exchanging localization data. If multiple languages are supported, a separate xliff subdirectory is provided for each language and is identified by its language code. For example, XLIFF files for German reside in xliff\deu and XLIFF files for French reside in xliff\fra. The naming convention for XLIFF files requires that all languages have the same file name as the corresponding report layout template, only the extension differs. For example, if the template name is aclist.rtf, then the XLIFF file must be named aclist.xlf. NOTE: After a report template is registered, the XLIFF file (or files) is stored in the relevant xliff\lang directory (or directories) on the Siebel Server. When you upload the report template, all the XLIFF files from each language folder and the RTF file are placed on the Oracle BI Publisher Server in their appropriate locations. For more information, see About the Oracle BI Publisher Server in Siebel Business Applications on page 32. TIP: Siebel Language Packs are installed as part of the Siebel installation process. For more information about installing languages, see Siebel Installation Guide for the operating system you are using.
31
Siebel Reports uses the following languages for generating reports: XSL-FO (Extensible Stylesheet Language-Formatting Objects). An XML vocabulary for specifying formatting semantics. XSLT (Extensible Stylesheet Language Transformation). A language for transforming XML documents. XPath (XML Path Language). An expression language used by XSLT to access or refer to parts of an XML document.
Siebel Reports also supports various report output file types. For more information about these report output types, see Siebel Reports Output File Types on page 22.
32
Siebel Reports Development Environment How Siebel Business Applications and Oracle BI Publisher Interact
The Oracle BI Publisher Server uses a push-pull mechanism to transfer XML data between the Siebel application and the Oracle BI Publisher Server. During report generation, which is triggered from the Siebel application, data is pushed from the Siebel Database to the Oracle BI Publisher Server to generate reports. When handling a report request, the Oracle BI Publisher Server merges the data with the report layout template from the Oracle BI Publisher repository, and then sends the report to the Siebel application. The following subtopics describe the Oracle BI Publisher Server functionality in relation to Siebel Reports in greater detail.
33
Siebel Reports Development Environment How Siebel Business Applications and Oracle BI Publisher Interact
Figure 4.
A report generation request is initiated from a Siebel application view, and then routed to one of the following to generate the report:
Oracle BI Publisher XDO Engine in disconnected mode Oracle BI Publisher Server in connected mode
2 3
The RTF Processor converts the RTF layout templates to XSL for input to the BI Publisher-FO Processor. The BI Publisher-FO Processor merges the XSL and the XML data files to produce the following output formats:
34
Siebel Reports Development Environment How Siebel Business Applications and Oracle BI Publisher Interact
XML, XSL-FO, are XLIFF formats are converted to: PDF, HTML, RTF, EXCEL, PPT, and MHTML.
NOTE: The PPT and MHTML output file types are available only in connected mode. Template Builder, a feature of Oracle Business Intelligence Publisher Add-in for Microsoft Word, is used to modify and customize layout templates. Template Builder uses form fields to encapsulate XSL instructions for parsing XML data. Form fields are a feature of Microsoft Word and are the building blocks for layout templates in Oracle Business Intelligence Publisher Add-in for Microsoft Word. You use form fields in template design wherever data is required. Template Builder generates these form fields using the Siebel application and the information specified in the layout template.
35
Siebel Reports Development Environment How Siebel Business Applications and Oracle BI Publisher Interact
36
This chapter provides instructions for administrators on how to integrate Oracle Business Intelligence Publisher (Oracle BI Publisher) with Siebel Business Applications for report generation. It includes the following topics: About Integrating Oracle BI Publisher with Siebel Business Applications on page 37 About Upgrading Siebel Reports on page 38 Where to Find Documentation for Previous Versions of Siebel Reports on page 38 Requirements for Using Siebel Reports on page 38 Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications on page 40 Preparing for Integration of Oracle BI Publisher with Siebel Business Applications on page 43 Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications on page 44 Upgrading to the Latest Oracle BI Publisher Patch on page 50 Configuring an Outbound Web Service for the Siebel Application on page 50 Enabling Siebel Server Components for Siebel Reports on page 51 About Security and Authentication for Siebel Reports on page 52 Configuring Security and Authentication for Siebel Reports on page 53 Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server on page 58 Uploading Preconfigured Report Layout Templates to the Oracle BI Publisher Server on page 60 Process of Enabling and Configuring Report Scheduling on page 61 Testing Your Siebel Reports Integration Configurations on page 64 Roadmap for Upgrading Siebel Reports on page 65
37
Integrating Oracle BI Publisher with Siebel Business Applications About Upgrading Siebel Reports
A Siebel Server (or servers) A Siebel Web Client for connected mode A Siebel mobile client (MWC or DWC) for disconnected mode Siebel Tools (Optional) ADM You might want to use ADM to migrate reports from one Siebel environment to another (for example, migrating reports from the development to the production environment). For more information about ADM, see Siebel Application Deployment Manager Guide.
Java Development Kit (JDK) version 1.6 or later and JAVA_HOME system environment variable points to JDK Siebel Server components enabled:
Siebel Application Object Manager (AOM), for example, SCCObjMgr_enu for Siebel Call Center
38
Integrating Oracle BI Publisher with Siebel Business Applications Requirements for Using Siebel Reports
EAI Object Manager XMLP Report Server (Optional) Workflow NOTE: Enable this component if you plan to use workflow, the Reports Business Service, or the XMLP Purge Records workflow.
Oracle Business Intelligence Publisher Oracle BI Publisher Add-In for Microsoft Word (also known as Oracle BI Publisher Desktop)
For information about which version to use, see Siebel System Requirements and Supported Platforms on Oracle Technology Network. For information about Oracle BI Publisher, see About Oracle BI Publisher on page 24. For information about installing Oracle BI Publisher as a firsttime installation, see Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications on page 44. If you are upgrading Oracle BI Publisher, see Roadmap for Upgrading Siebel Reports on page 65.
39
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications
40
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications
Figure 5.
41
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications
Figure 5 illustrates the high-level tasks you perform to integrate Oracle BI Publisher with Siebel Business Applications.
1 2 3 4
Preparing for Integration of Oracle BI Publisher with Siebel Business Applications on page 43 (First-time installation only) Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications on page 44 Upgrading to the Latest Oracle BI Publisher Patch on page 50 Apply repository, schema, and seed data changes for ACR 633. For instructions, see 880452.1 (Article ID) Siebel Maintenance Release Guide on My Oracle Support.
5 6 7
(First-time installation only) Configuring an Outbound Web Service for the Siebel Application on page 50 Enabling Siebel Server Components for Siebel Reports on page 51 Configuring Security and Authentication for Siebel Reports on page 53
Setting Up and Enabling the Siebel Security Model for Siebel Reports on page 53 Configuring Security and Authentication for Siebel Reports Using LDAP on page 58 Configuring Siebel Reports in a Web Single Sign-On Environment on page 58
8 9
Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server on page 58 Uploading Preconfigured Report Layout Templates to the Oracle BI Publisher Server on page 60
42
Integrating Oracle BI Publisher with Siebel Business Applications Preparing for Integration of Oracle BI Publisher with Siebel Business Applications
2 3
Review Siebel System Requirements and Supported Platforms on Oracle Technology Network. Also check for applicable alerts, bulletins, or other documents on My Oracle Support. Install the appropriate Java Development Kit (JDK) version and point the JAVA_HOME system environment variable to the JDK, if you have not already done so. To find the JDK version applicable to your deployment, see Siebel System Requirements and Supported Platforms on Oracle Technology Network.
Oracle Business Intelligence Publisher For installation instructions, see Installing Oracle Business Intelligence Publisher Enterprise for Integration with Siebel Business Applications on page 44.
Oracle BI Publisher Add-In for Microsoft Word (also known as Oracle BI Publisher Desktop) For installation instructions, see Installing Oracle Business Intelligence Publisher Add-in for Microsoft Word on page 46.
For the applicable version for your deployment, see Siebel System Requirements and Supported Platforms on Oracle Technology Network. For more information about Oracle BI Publisher, see About Oracle BI Publisher on page 24 and About Using Oracle Business Intelligence Publisher Addin for Microsoft Word with Siebel Reports on page 24.
Before using Siebel Reports, make sure that the Siebel Server is running and the Siebel clients and Siebel Tools can connect to the server data source.
43
Integrating Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
This topic describes how to install Oracle Business Intelligence Publisher (Oracle BI Publisher) as a first-time installation for integration with Siebel Business Applications. NOTE: Do not use this process if you are upgrading from a previous deployment of Siebel Reports. Instead, follow the instructions provided in Roadmap for Upgrading Siebel Reports on page 65. This process is a step in Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications on page 40. To install Oracle BI Publisher for integration with Siebel Business Applications, perform the following tasks:
Installing Oracle Business Intelligence Publisher Enterprise for Integration with Siebel Business Applications on page 44 For information about which versions of this software to use for your specific deployment, see Siebel System Requirements and Supported Platforms on Oracle Technology Network.
Installing Oracle Business Intelligence Publisher Add-in for Microsoft Word on page 46 For information about which versions of this software to use for your specific deployment, see Siebel System Requirements and Supported Platforms on Oracle Technology Network.
3 4 5 6
Copying JAR Files to the Oracle BI Publisher Server on page 47 Disabling External File References on the Oracle BI Publisher Server on page 48 (Optional) Changing the Location of the Oracle BI Publisher Repository for Siebel Reports on page 73 Upgrading to the Latest Oracle BI Publisher Patch on page 50 NOTE: This task is applicable to both first-time Siebel Reports deployments as well as upgrades.
Installing Oracle Business Intelligence Publisher Enterprise for Integration with Siebel Business Applications
Use the following procedure to install Oracle BI Publisher Enterprise for integration with Siebel Business Applications and Siebel Reports. This task is a step in Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications on page 44. NOTE: Perform the following procedure only if this is a first-time Siebel Reports deployment. This task is not applicable if you are upgrading.
44
Integrating Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
2 3 4
Choose a language, or click Continue to download with English (US) as the default language. Enter the export validation information, accept the license terms and export restrictions, and then click Continue. Select Oracle Business Intelligence as the product pack, and an operating system (for example, Microsoft Windows [32-bit]). Then click Go. NOTE: You must select an operating system compatible with the computer on which the Oracle BI Publisher Server is installed. For information about which platforms are supported for Siebel Reports, see Siebel System Requirements and Supported Platforms on Oracle Technology Network.
Select the Oracle Business Intelligence 10.1.3 Media Pack for your operating system, and then click Continue. For example, you might select Oracle Business Intelligence (10.1.3) Media Pack for Microsoft Windows (32-bit).
Download the appropriate Oracle BI Publisher 10.1.3.4.1 installer for your deployment. For example, if you chose Oracle Business Intelligence (10.1.3) Media Pack for Microsoft Windows (32-bit) in Step 5, you download the following: Oracle Business Intelligence Publisher Enterprise 10.1.3.4.1 for Microsoft Windows NOTE: Typically administrators download and install Oracle Business Intelligence Desktop (also known as Oracle Business Intelligence Publisher Add-in for Microsoft Word) during the Oracle BI Publisher Enterprise installation, however, you can install it any time.
Decompress the installer into a directory of your choice. If you chose Oracle Business Intelligence (10.1.3) Media Pack for Microsoft Windows (32-bit) in Step 5, you decompress the V16384-01.zip file. CAUTION: You must extract the .zip file to a directory whose name does not contain spaces. If the directory name contains spaces, the installation fails.
Follow the instructions about installing Oracle BI Publisher on Oracle Application Server for OC4J 10.1.3.1 in Oracle Business Intelligence Publisher Installation Guide, Release 10.1.3 available on Oracle Technology Network (OTN). NOTE: OC4J is installed and the Oracle BI Publisher Server starts automatically as part of this installation.
Verify the installation by making sure you have an Oracle - BIPHomeX entry in the Start Programs menu, where X is an incremental number depending on the number of Oracle installations you have.
Create a local Superuser for the Oracle BI Publisher Server by doing the following:
45
Integrating Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
Start Oracle BI Publisher (for example, http://BIPServerHostName:9704/xmlpserver), and then log in to the Oracle BI Publisher Server with administrator credentials. NOTE: The URL for launching Oracle BI Publisher resides in the BI_Publisher_readme.txt file located in the Oracle BI Publisher installation folder. Administrator credentials are case sensitive.
b c
Click the Admin tab, and then select Security Configuration (in the Security Center section). Check the Enable Local Superuser checkbox, enter a Superuser name and password of your choice, and then click Apply.
After creating a local superuser, administrators can log in directly to the Oracle BI Publisher Server when the Siebel Server is not running.
2 3 4
Choose a language, or click Continue to download with English (US) as the default language. Enter the export validation information, accept the license terms and export restrictions, and then click Continue. Select Oracle Business Intelligence as the product pack, and an operating system (for example, Microsoft Windows [32-bit]). Then click Go. NOTE: You must select an operating system compatible with the computer on which the Oracle BI Publisher Server is installed. For information about which platforms are supported for Siebel Reports, see Siebel System Requirements and Supported Platforms on Oracle Technology Network.
46
Integrating Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
Select the Oracle Business Intelligence 10.1.3 Media Pack for your operating system, and then click Continue. For example, you might select Oracle Business Intelligence (10.1.3) Media Pack for Microsoft Windows (32-bit).
Download the appropriate Oracle BI Publisher 10.1.3.4.1 installer for your deployment. For example, if you chose Oracle Business Intelligence (10.1.3) Media Pack for Microsoft Windows (32-bit) in Step 5, you download the following: Oracle Business Intelligence Publisher Desktop 10.1.3.4.1 for Microsoft Windows NOTE: Typically administrators download and install Oracle Business Intelligence Desktop (also known as Oracle Business Intelligence Publisher Add-in for Microsoft Word) during the Oracle BI Publisher Enterprise installation, however, you can install it any time.
Install Oracle Business Intelligence Publisher Add-in for Microsoft Word by doing the following:
Decompress the appropriate .zip file according to the Media Pack you chose in Step 4. For example, if you chose Oracle Business Intelligence (10.1.3) Media Pack for Microsoft Windows (32-bit) in Step 5, you decompress the V16380-01.zip file. CAUTION: You must extract the .zip file to a directory whose name does not contain spaces. If the directory name contains spaces, the installation fails.
b c
Run the installer. Verify the installation by making sure you have an Oracle BI Publisher Desktop application in the Start Programs menu.
For more information about installing this software, see the post-installation topics in Oracle BI Publisher on Oracle Application Server for OC4J 10.1.3.1 in Oracle Business Intelligence Publisher Installation Guide, Release 10.1.3 available on Oracle Technology Network (OTN).
Make sure that applicable users install Oracle BI Publisher Desktop on a computer where Microsoft Word for Windows is installed.
47
Integrating Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
NOTE: Typically, ORACLE_APPSRVR_HOME is the C:\OraHome_X\oc4j_bi directory where oc4j_bi is the Oracle BI Publisher installation directory for Windows. The InkToolsLib.jar and iSignBmp.jar files are required whenever signatures must appear in a Siebel report that are captured by way of the Siebel signature capture feature.
If there are additional custom Java extensions, you must copy those JAR files as well.
Log in to the Oracle BI Publisher Server with administrator privileges by doing the following:
a b
Click Start, Programs, Oracle - BIPHomeX, and then BI Publisher Server. Enter your administrator credentials (such as Administrator for the login and Administrator for the password). NOTE: Administrator credentials for the Oracle BI Publisher Server are established during installation and are case sensitive.
Click the Admin tab, and then select Properties under Runtime Configuration.
48
Integrating Oracle BI Publisher with Siebel Business Applications Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications
4 5
Change the default value for the Disable External Reference attribute to FALSE, and then click Apply. Restart OC4J to make the changes take effect. For instructions, see Starting and Stopping OC4J and Oracle BI Publisher on page 49.
Confirm the Oracle BI Publisher Server is started. When the server is started, a statement appears in the command window indicating the Oracle Containers are initialized.
49
Integrating Oracle BI Publisher with Siebel Business Applications Upgrading to the Latest Oracle BI Publisher Patch
50
Integrating Oracle BI Publisher with Siebel Business Applications Enabling Siebel Server Components for Siebel Reports
For example, the address might be: http://BIPServerHostName:9704/xmlpserver/services/PublicReportServiceService TIP: Other than in this specific procedure, there is typically no need to change this address because it is automatically populated when you configure the business service and the Web service in Siebel Tools using the Web service wizard.
Click Clear Cache to make sure that the changes are propagated to run-time memory.
NOTE: If you are upgrading, you only need confirm these components are active. Additionally, the XMLP Report Server component might already be enabled depending on how you configured your original Siebel Server installation.
(Optional) Enable the Workflow server component. NOTE: Enable this component if you plan to use workflow, the Reports Business Service, or the XMLP Purge Records workflow.
For information about enabling Siebel Server components, see Siebel System Administration Guide.
51
Integrating Oracle BI Publisher with Siebel Business Applications About Security and Authentication for Siebel Reports
Siebel Security Model The Siebel Security model retrieves authentication information through the Siebel EAI Object Manager (EAIObjMgr) and authenticates logins for report users against the Siebel Database one time only, then a session token is provided for the Oracle BI Publisher Server authentication. Because every user executing reports has their own credentials and roles, users have private visibility on the Oracle BI Publisher Server when scheduling reports. The reporting responsibilities in the Siebel application correspond to roles and permissions on the Oracle BI Publisher Server. The names of these responsibilities must exactly match the corresponding set of roles on the Oracle BI Publisher Server. NOTE: It is recommended that you use this model because it was designed specifically for use with Siebel Reports.
LDAP In an implementation using LDAP authentication, an LDAP security adapter provided with Siebel Business Applications authenticates users against an LDAP-compliant directory. The directory stores information that is required to allow users to connect to the database and the Oracle BI Publisher Server and this information is retrieved by the security adapter when users try to run a report. When users log into a Siebel application that uses LDAP authentication, they are already authenticated for the current session.
Web Single Sign-On Authentication This model allows you to use a non-standard security model, such as Siteminder or some other type of custom single sign-on.
52
Integrating Oracle BI Publisher with Siebel Business Applications Configuring Security and Authentication for Siebel Reports
Setting Up and Enabling the Siebel Security Model for Siebel Reports on page 53 Configuring Security and Authentication for Siebel Reports Using LDAP on page 58 Configuring Siebel Reports in a Web Single Sign-On Environment on page 58
Setting Up and Enabling the Siebel Security Model for Siebel Reports
To set up the Siebel Security Model for Siebel Reports, the address field on the service port of the Siebel Server must reflect the name of the computer hosting the Oracle BI Publisher Server. You must also make sure certain responsibilities are assigned users and associated to the correct views. If this is a first-time Siebel Reports installation, you must also enable the Siebel Security Model. NOTE: It is recommended that you use this security model. It is designed specifically for use with Siebel Reports. This task is a step in Configuring Security and Authentication for Siebel Reports on page 53.
To set up and enable the Siebel Security Model for Siebel Reports 1
(First-time install only) Create the inbound Web service for the Siebel application by doing the following:
a b c d
Navigate to the Administration - Web Services screen, then the Inbound Web Services view. Import the BIPSiebelSecurityWS.XML file from the SIEBEL_TOOLS_ROOT\REPPATCH directory (where Siebel Tools is installed) to create a new inbound Web service. In the Name field, query for BIPSiebelSecurityWS. Change the host and port number of the server ports address to that of the Siebel Server. For example, you might replace the existing address with: http:/computer.domain.com/eai_enu/ start.swe?SWEExtSource=WebService&SWEExtCmd=Execute
53
Integrating Oracle BI Publisher with Siebel Business Applications Configuring Security and Authentication for Siebel Reports
e 2 a b
(Upgrade only) Change view names in the Siebel application to reflect repository changes: Navigate to the Administration - Application screen, then the Views view. In the View Name field, query for the following views and rename them: Existing View Name All Template View Managers Template View New View Name All Template Report View Managers Report Template View
c 3
Clear the cache, log out of the Siebel application, and then log back in.
(First-time installation only) Create four new responsibilities and add appropriate users to each by doing the following:
Navigate to the Administration - Application screen, then the Responsibilities view to create the responsibilities described in the following table. Responsibility XMLP_ADMIN XMLP_DEVELOPER XMLP_SCHEDULER XMLP_SIEBEL_GUEST Description Administrator role for the Oracle BI Publisher Server with no access limitations. Assign this responsibility to allow for uploading reports from the Oracle BI Publisher Server to the Siebel application. Assign this responsibility to allow for scheduling of reports. Assign this responsibility to limit access to reports. This responsibility only allows for generation, viewing, and deletion of users own reports.
NOTE: The reporting responsibilities in the Siebel application correspond to roles and permissions on the Oracle BI Publisher Server. The names of these responsibilities must exactly match the corresponding set of roles on the Oracle BI Publisher Server.
b 4
(Upgrade only) Verify the following responsibilities exist and confirm each are assigned the appropriate users:
54
Integrating Oracle BI Publisher with Siebel Business Applications Configuring Security and Authentication for Siebel Reports
Make sure the scheduling views are associated with the appropriate responsibilities and users by doing the following:
a b c
Associate the XMLP_ADMIN responsibility to all scheduling views, then assign that responsibility to just administrators. Associate the XMLP_SCHEDULER responsibility to the Report Job List View, and then assign that responsibility only to those users who run scheduled reports. Assign the XMLP_DEVELOPER responsibility to the following views, and then assign that responsibility only to users who register report templates (typically, report developers):
My Template View All Template Report View Managers Report Template View Report Standard Template Registration Admin View
Assign responsibility XMLP_GUEST responsibility to the following views, and then assign that responsibility to any user running reports:
All Report Output List View Managers Report Output List View
The following table shows a matrix for which views to associate with each responsibility. Responsibility View Report Job List View All Report Output List View My Template View All Template Report View Managers Report Output List View Managers Report Template View Report Standard Template Registration Admin View All Report Template Across Organization View XMLP_ ADMIN Yes Yes Yes Yes Yes Yes Yes Yes XMLP_ SCHEDULER Yes No No No No No No No XMLP_ DEVELOPER No No Yes Yes No Yes Yes No XMLP_ SIEBEL_GUEST Yes Yes No No No No No No
6 7
If changes are necessary, clear the cache, log out of the Siebel application, and then log back in. (First-time installation only) Verify your configurations by doing the following:
55
Integrating Oracle BI Publisher with Siebel Business Applications Configuring Security and Authentication for Siebel Reports
Confirm a new Scheduled Reports link was added to the My BI Publisher Reports screen. The Scheduled Reports link in the Siebel application is an embedded user interface to the Oracle BI Publisher Server that allows users to view their scheduled reports. Before you can use this link, you must perform further configuration to embed the Scheduled Reports view in the Siebel application.
Confirm the views were added to the appropriate screens as shown in the following table. View All Report Output List View All Template Report View Manager's Report Output List View Manager's Template View My Template View Report Standard Template Registration Admin View All Report Template Across Organization View Screen Reports Server Report Administration Reports-Custom Templates Report Administration Report Administration Reports-Standard Templates Reports-Standard Templates
(First-time installation only) Enable the Siebel Security Model by doing the following:
a b c
Log in to the Oracle BI Publisher Enterprise application with administrator privilege. Click the Admin tab, and then select Security Configuration (under Security Center). In the Security Model section, perform the following, and then click Apply:
Set the model to Siebel Security Enter the host name and port as the Web Service Endpoint
56
Integrating Oracle BI Publisher with Siebel Business Applications Configuring Security and Authentication for Siebel Reports
NOTE: The address of the Web Service Endpoint parameter in the Oracle BI Publisher Server is the same address as the inbound Web service used by the Siebel Server. The following table provides sample parameter values for a Siebel Security model configuration. Parameter Security Model Siebel Web Service Endpoint Administrator Username Administrator Password Value Siebel Security http:/host.domain.com/eai_enu/ start.swe?SWEExtSource=WebService&SWEExtCmd=Execute username password NOTE: The password for an account cannot be the same as the user name for that account.
NOTE: Siebel administrator credentials are necessary for the Oracle BI Publisher application to log into the Siebel EAI object manager. These credentials are case sensitive and must match the Siebel database specifications.
Restart the Oracle BI Publisher Server. For information about restarting the Oracle BI Publisher Server, see Restarting OC4J and Oracle BI Publisher on page 49.
10 (First-time installation only) Verify that the Siebel Security Model has been implemented by doing
the following:
a b
Start the Oracle BI Publisher Enterprise application (from the Start Menu, choose Start BI Publisher). Log in to the Oracle BI Publisher Enterprise application using the Siebel administrator credentials.
The Siebel Security Model was successfully implemented if you are able to login using the Siebel credentials.
11 Add an explicit classpath and add a new wlfullclient.jar file to the XMLPJvmSubsys profile for the
Oracle BI Publisher Server. For instructions, see Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server on page 58.
57
Integrating Oracle BI Publisher with Siebel Business Applications Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server
Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server
You must add an explicit reference to the Siebel JAR files for the Oracle BI Publisher Server to upload templates and run immediate reports. This is because when a report is scheduled, a new .xdo file is sent to the Oracle BI Publisher Server that contains the schedule job information. The task is a step in Roadmap for Integrating Oracle BI Publisher with Siebel Business Applications on page 40. NOTE: If you are upgrading, you only need add the new wlfullclient.jar file to the explicit classpath (see Step 3 on page 59), and then restart the Siebel Services.
58
Integrating Oracle BI Publisher with Siebel Business Applications Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server
To add an explicit reference to JAR files for the Oracle BI Publisher Server 1 2 3
Navigate to the Administration - Server Configuration screen, Enterprises, and then the Profile Configuration view. Select the XMLPJvmSubsys profile. In the Profile Parameters subview, provide a reference to each of the JAR files in the CLASSES directory in the Siebel application root directory and set the JVM DLL Name. Some of the values are provided in the following table. Make sure that the paths correctly locate the required files. Parameter JVM Classpath Value <SIEBSRVR_ROOT>/classes/Siebel.jar;<SIEBSRVR_ROOT>/classes/ SiebelXMLP.jar;<SIEBSRVR_ROOT>/classes/wlfullclient.jar where:
59
Integrating Oracle BI Publisher with Siebel Business Applications Uploading Preconfigured Report Layout Templates to the Oracle BI Publisher Server
a b
Log in to the Oracle BI Publisher Enterprise application with administrator privilege. Open a new browser window and navigate to the Oracle BI Publisher Server at http://BIPServerHostName:port/xmlpserver
60
Integrating Oracle BI Publisher with Siebel Business Applications Process of Enabling and Configuring Report Scheduling
Click the Admin tab, select Roles and Permissions, and then locate the XMLP roles (XMLP_*). TIP: These roles begin with XMLP and are listed in alphabetical order.
d e
For each report responsibility, click Add Folders to grant permission to the shared SiebelCRMReports folder. Restart the Oracle BI Publisher Server.
1 2 3
(First-time installation only) Setting Up the Database Schema for the Oracle BI Publisher Server on page 61 Configuring the Data Service WSDL for the Oracle BI Publisher Server on page 62 Verifying Symbolic URL Arguments That Embed the Oracle BI Publisher Scheduling Views in the Siebel Application on page 63
Set up a new database instance. Create a user with privileges to add tables. Create the database connection.
a b
Log in to the Oracle BI Publisher Enterprise application with administrator privilege. Click the Admin tab, and then select Scheduler Configuration.
61
Integrating Oracle BI Publisher with Siebel Business Applications Process of Enabling and Configuring Report Scheduling
Select the database type applicable to your deployment and provide information as shown in the following table. Database Oracle Enter Connection String->jdbc:oracle:thin:@[host]:[port]:[SID] dbtableowner is nothing but user name and password host-is nothing but databaseserver port-is nothing but LM_DB_port [SID]-is nothing but dbinstance Data base driver class: oracle.jdbc.OracleDriver MSSQL connection string:jdbc:hyperion:sqlserver:// databaseserver:LM_DB_port;DatabaseName=databasename username:username password:password Data base driver class: hyperion.jdbc.sqlserver.SQLServerDriver db2 Connection String: jdbc:hyperion:db2:// BIPServerHostName:port;DatabaseName=<DATABASENAME> username:username password:password
d e
Click Test Connection to make sure that the connection works. Click Install Schema.
Restart both the Oracle BI Publisher Server and the Siebel Server (or servers).
Configuring the Data Service WSDL for the Oracle BI Publisher Server
The Oracle BI Publisher Server uses a Web service to pull data from the Siebel application when a report is scheduled and executed. The WSDL (Web Service Definition Language) provides a definition of this Web service. The Oracle BI Publisher Server must know where this WSDL file is located. The task is a step in Process of Enabling and Configuring Report Scheduling on page 61.
62
Integrating Oracle BI Publisher with Siebel Business Applications Process of Enabling and Configuring Report Scheduling
To configure the data service WSDL for the Oracle BI Publisher Server 1 2 3
Log in to the Siebel application as a Siebel administrator. Navigate to the Administration - Web Services screen, then the Inbound Web Services view. Configure the address for the BIPDataService Web service with the host name and port number of the Siebel Server and modify the credentials to correspond to the username, login, and password used for logging in to the Siebel EAI object manager. Select BIPDataService, and then click Generate WSDL. Save the WSDL as a new data service file named dataservice.wsdl in a directory in the Oracle BI Publisher home directory (by default, this is the \OraHome_X\oc4j_bi\bin directory). For example, you might save the file as: D:\OraHome_1\oc4j_bi\bin\dataservice.wsdl NOTE: You must use lower case to match existing references. The WSDL is now available for importing.
4 5
Verifying Symbolic URL Arguments That Embed the Oracle BI Publisher Scheduling Views in the Siebel Application
The Scheduled Reports view in the Siebel application is for managing scheduled reports. This view is an embedded Web page from the Oracle BI Publisher Enterprise application. To configure this view, you implement a symbolic URL to display external contents in the Siebel user interface by specifying how to construct the external application and define arguments and values that are passed to the Siebel client. For more information about working with symbolic URLs, see Siebel Portal Framework Guide. For information about how to schedule reports, see Chapter 8, Scheduling Reports. The task is a step in Process of Enabling and Configuring Report Scheduling on page 61.
To verify symbolic URL arguments that embed the Oracle BI Publisher Scheduling Views in the Siebel application 1 2 3
Navigate to the Administration - Integration screen, WI Symbolic URL List, and then the Host Administration view. Query for BIPReportJobListPage. In the Symbolic URL Arguments subview, verify the following arguments to the symbolic URL. Required Argument Yes Yes Argument Type Command Command
63
Integrating Oracle BI Publisher with Siebel Business Applications Testing Your Siebel Reports Integration Configurations
Argument Name uid NOTE: For upgrades only, you must rename this argument to uid from id. anyname passwd _xuil NOTE: This argument is applicable only for nonEnglish deployments. pgheader
Yes
Constant
hide
4 5
Log out of the Siebel application, and then log in again. (Upgrade only) Confirm the new monthly scheduling List of Value (LOV) is available by doing the following:
a b c
Log in to the Siebel application as a Siebel administrator. Navigate to the Administration - Data screen, then the List of Values Explorer view. In the List of Values view, make sure there is Monthly value for the XMLP_RPT_SCHEDULE_MODE type.
a b
Navigate to the Administration - BI Publisher Reports screen, then the relevant template view (Reports - Custom Templates or Reports - Standard Templates). Select the Account List report layout template, and then click Upload Files.
64
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Upgrading Siebel Reports
Navigate to the View Association view to associate the Account List report to the Account List view.
The Account List report layout template is now available to the Siebel application for use in generating reports.
a b c d e
Navigate to the Accounts screen, then the Accounts List view. Perform a query that returns approximately 30 records, and then click Reports. In the BI Publisher section, choose Account List. Select the report output type, and then click Submit. The report is generated after you choose to open the report. Generate the report in a different format or click Close to close the output type dialog box.
NOTE: When you create your own custom reports, you must upload the report template and associate it with a view before you can use that report. For more information about generating reports, see Chapter 6, Generating Reports.
a b
Make sure you have a Siebel CRM version 8.1.1 or later environment and have applied the latest Siebel CRM Fix Pack 8.1.1.x. Upgrade to the appropriate Java Development Kit (JDK) version and make sure the JAVA_HOME system environment variable points to the JDK.
For the applicable versions for your deployment, see version 8.1.1.x Siebel System Requirements and Supported Platforms on Oracle Technology Network.
Make sure you have the appropriate Oracle Business Intelligence Publisher software installed:
Oracle Business Intelligence Publisher Oracle Business Intelligence Publisher Add-in for Microsoft Word (also known as Oracle BI Publisher Desktop)
For the applicable version for your deployment, see Siebel System Requirements and Supported Platforms on Oracle Technology Network. NOTE: If you are currently using Oracle BI Publisher Version 10.1.3.4.0, you must upgrade. For instructions, see Upgrading to Oracle BI Publisher Version 10.1.3.4.1 from Version 10.1.3.4.0 on page 66.
65
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Upgrading Siebel Reports
3 4
Upgrading to the Latest Oracle BI Publisher Patch on page 50 Apply repository, schema, and seed data changes for ACR 633. For instructions, see 880452.1 (Article ID) Siebel Maintenance Release Guide on My Oracle Support.
(Optional) Enable the Workflow server component. For instructions, see Enabling Siebel Server Components for Siebel Reports on page 51.
a b
Change view names in the Siebel application to reflect repository changes. Verify XMLP responsibilities, report views, and user assignments.
For instructions, see Setting Up and Enabling the Siebel Security Model for Siebel Reports on page 53. NOTE: Many of the steps in this task are applicable only to first-time installations. Make sure to perform only steps indicated for upgrades.
Add a new wlfullclient.jar file to the XMLPJvmSubsys classpath for the Oracle BI Publisher Server. For instructions, see Adding an Explicit Reference to JAR Files for the Oracle BI Publisher Server on page 58.
8 9
Uploading Preconfigured Report Layout Templates to the Oracle BI Publisher Server on page 60 Configure report scheduling by doing the following:
a b
Configuring the Data Service WSDL for the Oracle BI Publisher Server on page 62 Change the id symbolic URL argument name to uid and create a new pgheader argument. For instructions, see Verifying Symbolic URL Arguments That Embed the Oracle BI Publisher Scheduling Views in the Siebel Application on page 63.
66
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Upgrading Siebel Reports
One or more application client modules Additional JAR files required by the application Any combination of the above
NOTE: The instructions in this topic are not applicable if you are installing Oracle BI Publisher for the first time. To install Oracle BI Publisher as a first-time installation, see Process of Installing Oracle BI Publisher for Integration with Siebel Business Applications on page 44.
Follow the instructions as described in the Oracle Business Intelligence Publisher Installation Guide (Release 10.1.3.4.1) available on Oracle Technology Network. NOTE: The steps are the same for upgrading to version 10.1.3.4.1 from version 10.1.3.4.0 with the exception that you do not need to test the login page or install the fonts.
b 2
Follow the instructions in the Oracle Business Intelligence Publisher Release Notes (Release 10.1.3.4.1) available on Oracle Technology Network.
Upgrade to Oracle BI Publisher Desktop version 10.1.3.4.1 For installation information, see the topic on installing BI Publisher Desktop tools in Oracle Business Intelligence Publisher Installation Guide available on Oracle Technology Network. The instructions contain information for uninstalling current installations. NOTE: It is recommended that you do not use Oracle BI Publisher Desktop version 10.1.3.4.0 with Oracle BI Publisher version 10.1.3.4.1.
Make sure that your users upgrade to Oracle BI Publisher Desktop version 10.1.3.4.1. For information about using Oracle BI Publisher Desktop with Siebel Reports, see About Using Oracle Business Intelligence Publisher Add-in for Microsoft Word with Siebel Reports on page 24.
67
Integrating Oracle BI Publisher with Siebel Business Applications Roadmap for Upgrading Siebel Reports
68
This chapter describes some of the administrative tasks for Siebel Reports. The tasks in this chapter are for administrators only and are applicable to both connected and disconnected modes unless otherwise indicated. This chapter includes the following topics: Deploying Report Layout Templates to the Siebel Web Client from a Disconnected Client on page 69 Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments Automatically Purging Reports from the Siebel File System on page 71 Purging Scheduled Reports from the Oracle BI Publisher Server on page 72 Changing the Location of the Oracle BI Publisher Repository for Siebel Reports on page 73 Copying Fonts for Report Generation on page 75 About Working with Multilingual Reports on page 75 Designing Multilingual Reports on page 77 Example of Uploading Multilingual Reports to the Siebel Application on page 78 Adding and Deleting Languages from Report Templates on page 79 About Report Translation on page 80 Roadmap for Optimizing the Performance of Siebel Reports on page 80 Setting the Report Execution Waiting Period for Reports on page 81 Setting the Server Request Processor Database Polling Interval for Siebel Reports on page 82 Setting Concurrency Parameters for Siebel Reports on page 82 Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes on page 84
Deploying Report Layout Templates to the Siebel Web Client from a Disconnected Client
Siebel reports are typically developed on a disconnected client, such as the Siebel Developer Web Client. After you test and verify a report layout template, you must move that report to the Siebel Server to deploy the report to the Siebel Web Client. The report is then available for generation in connected mode with the Oracle Business Intelligence Publisher (Oracle BI Publisher) Server. This topic describes how to deploy reports to the Siebel Web Client from a disconnected client.
69
Administering Siebel Reports Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments
NOTE: It is recommended that you locate your report layout template files in the SIEBSRVR_ROOT\XMLP\Templates directory and the XLIFF files in the SIEBSRVR_ROOT\XMLP\xliff\language directory.
Navigate to the Administration - BI Publisher Reports screen, then one of the following template views:
b c
Create a new record and assign the template and integration object to the record. In the XLIFF field, assign the associated .xlf file to the report.
NOTE: The Generate XLIFF button is disabled in the Siebel Web Client and that is why you must explicitly select the .xlf file.
Assign the report to a Siebel view or views. For information about assigning reports to Siebel views, see Associating Registered Reports with Siebel Application Views on page 120.
Upload the report to the Oracle BI Publisher Server by doing the following:
a b 5 a b c
Verify the report was successfully uploaded by doing the following: Log in to the Oracle BI Publisher Server with administrator privilege. Click the Reports tab, expand Shared Folders, and then click SiebelCRMReports. Verify that the new report layout template and associated files were uploaded.
Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments
This topic describes how to upload new or modified report layout templates in a multiple Siebel Server environment.
70
Administering Siebel Reports Automatically Purging Reports from the Siebel File System
To upload new or modified report layout templates for a multiple Siebel Server environment 1
For each of the Siebel Servers, copy the new or modified RTF file to the following directory:
SIEBSRVR_ROOT\TEMP\XMLP
NOTE: Overwrite any existing files.
For each of the Siebel Servers, copy the .XLF (XLIFF) file to the appropriate language folder in the following directory:
SIEBSRVR_ROOT\XMLP\XLIFF
For example, the language folder for English (U.S.) is as follows:
SIEBSRVR_ROOT\XMLP\XLIFF\ENU
3 4
Log in to the Oracle BI Publisher Server as administrator and manually delete the report layout template from the SiebelCRMReports folder. Log in to the Siebel Web Client and upload the new or modified report layout template by doing the following:
a b
Navigate to the Administration - BI Publisher Reports screen, then the relevant template view (Reports - Custom Templates or Reports - Standard Templates). Click Upload Files.
71
Administering Siebel Reports Purging Scheduled Reports from the Oracle BI Publisher Server
2 3
Navigate to the Administration - Application screen, then the System Preferences view. In the System Preferences list, select BIP Delete After Days, and change the value to a positive, nonzero value. By default, the value is set to -1 (minus 1). NOTE: It is recommended that you set this value in relation to your daily report volumes, especially for large-scale implementations where many reports are generated. The -1 setting prevents the Siebel File System from increasing to an unmanageable size.
4 5 6
Navigate to the Administration - Server Management screen, then the Jobs view. Add a new job entitled Workflow Process Manager. Add a parameter to the job as follows:
a b 7
Enter Workflow Process Name as the name. Give the parameter a value of XMLP Purge Records.
Click Submit.
You can also schedule this job to generate periodically using a workflow. For more information about scheduling workflows, see Siebel Business Process Framework: Workflow Guide.
CAUTION: It is recommended that only administrators purge scheduled reports, because you run the risk of inadvertently depleting or contaminating the report repository. Report developers and other users can delete reports, but they cannot purge reports. For information about deleting reports, see Deleting Scheduled Reports on page 129. NOTE: Administrators are also responsible for purging reports from the Siebel File System. For information about this purging, see Automatically Purging Reports from the Siebel File System on page 71.
72
Administering Siebel Reports Changing the Location of the Oracle BI Publisher Repository for Siebel Reports
Changing the Location of the Oracle BI Publisher Repository for Siebel Reports
This topic describes how to change the location of the Oracle BI Publisher repository for use with Siebel Reports. By default, the location of the Oracle BI Publisher repository is stored in the Oracle home JVM property with a value of ${oracle.home}/xdo/repository. The Siebel application uses this JVM property to access the Oracle BI Publisher repository. If Oracle BI Publisher is running on an Oracle Application server or an Oracle Application Server Containers for Java Platform, Enterprise Edition (OC4J) standalone, this oracle.home property value is automatically set by the OC4J container. For more information about OC4J, see Oracle Business Intelligence Publisher Installation Guide, Release 10.1.3 available on Oracle Technology Network (OTN). If you do not want to use ${oracle.home}/xdo/repository as the location of your Oracle BI Publisher repository, there are three different ways you can change it: Create a custom XML file For instructions, see Changing the Location of the Oracle BI Publisher Repository by Creating a Custom XML File on page 73. Replace a JVM property name For instructions, see Changing the Location of the Oracle BI Publisher Repository by Replacing a JVM Property Name on page 74 Change the absolute path to the repository For instructions, see Changing the Location of the Oracle BI Publisher Repository by Changing the Absolute Path to the Repository on page 75.
Changing the Location of the Oracle BI Publisher Repository by Creating a Custom XML File
Use the following procedure to change the location of the Oracle BI Publisher Repository by creating a custom XML file. This task is a step in Changing the Location of the Oracle BI Publisher Repository for Siebel Reports on page 73.
To create a custom XML file to change the location of the Oracle BI Publisher repository 1
Copy the xmlp-server-config.xml file and paste it to a folder where Oracle BI Publisher can read it. For example, in an Oracle AS/OC4J 10.1.3 deployment, you copy the configuration file from: OC4J_HOME/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-serverconfig.xml
73
Administering Siebel Reports Changing the Location of the Oracle BI Publisher Repository for Siebel Reports
Edit the newly created .xml file to reflect the new path. The default configuration for the xmlp-server-config.xml file is: <?xml version="1.0" encoding="UTF-8"?> <xmlpConfig xmlns="http://xmlns.oracle.com/oxp/xmlp"> <resource> <file path="${oracle.home}/xdo/repository"/> </resource> </xmlpConfig>
Start the application server by adding the following JVM option: -Dxdo.server.config.dir=/home/BIP
Changing the Location of the Oracle BI Publisher Repository by Replacing a JVM Property Name
Use the following procedure to change the location of the Oracle BI Publisher Repository by replacing a JVM property name. This task is a step in Changing the Location of the Oracle BI Publisher Repository for Siebel Reports on page 73.
To change the location of the Oracle BI Publisher repository by replacing a JVM property name
In the WEB-INF/xmlp-server-config.xml file, replace oracle.home with some other JVM property name. NOTE: You must set the value of the new JVM property to the correct repository path.
74
Changing the Location of the Oracle BI Publisher Repository by Changing the Absolute Path to the Repository
This task is a step in Changing the Location of the Oracle BI Publisher Repository for Siebel Reports on page 73. Use the following procedure to change the location of the Oracle BI Publisher Repository by changing the absolute path to the repository.
To change the location of the Oracle BI Publisher repository by changing the absolute path to the repository
In the WEB-INF/xmlp-server-config.xml file, change the absolute path to the repository that you want.
To copy fonts
On the Siebel Server where the XMLP Report Server component is enabled, do one of the following:
For Windows, copy the fonts in C:\WINDOWS\Fonts directory to the fonts directory in the Java installation directory for your deployment (typically this is JAVA_HOME\lib\fonts). For UNIX, copy the fonts in the /Fonts directory to the fonts directory in the Java installation directory for your deployment.
NOTE: This task is typically performed as part of the Siebel application installation. However, administrators can perform this task at any time.
75
Make sure that a report is generated against a particular Siebel record with a preference for a specific document language and locale for that record. For example, you might have a preference for a document language for a specific Quote report. Let users set a default language and locale preference for their own report generation. Let users override the default language and locale values when generating reports. Execute report generation using the default language and locale settings of the users session object manager.
Table 7 provides details of how this logic is implemented in Siebel Reports. The order defines the logic applied at run time to determine which default language preferences to use.
Table 7.
How Siebel Reports Determines the Report Language at Run Time Order 1 Description If a default language and locale are specified in the report layout template, then these values appear as the default selection for the report output. However, users can override these settings at run time for an individual report (see Run-time Selection in this table). The Report Business Service is configurable for language and locale as optional inputs. If the language and locale are specified at the template level, then the template parameters are used rather than those specified for the input. If no parameters are passed to the Report Business Service, the default application object manager values are used. NOTE: Only use language and locale values as business service inputs when these values are not set at the template level.
User preferences
If the report layout template does not have a default language and locale, and the user has set a language and locale property in their user preferences, the user preference values are used. Otherwise, the values in the report layout template prevail. For information about setting user preferences for report generation, see Setting Language and Locale User Preferences for Reports on page 97. Users can override the default language and locale values when generating a report. If no default language and locale are specified in the report layout template level or in the user preferences, then the current application object manager values for the session are used.
4 5
Related Topics Designing Multilingual Reports on page 77 Example of Uploading Multilingual Reports to the Siebel Application on page 78 Adding and Deleting Languages from Report Templates on page 79
76
Related Topics About Working with Multilingual Reports on page 75 Example of Uploading Multilingual Reports to the Siebel Application on page 78 Adding and Deleting Languages from Report Templates on page 79 About Report Translation on page 80
77
Administering Siebel Reports Example of Uploading Multilingual Reports to the Siebel Application
The report layout template file (filename.rtf) is located in the TEMPLATES directory. In this example, let us say the name of the template is opptylist.rtf.
There are subdirectories in the XLIFF directory for English and other supported languages.
NOTE: Typically, the TEMPLATES and XLIFF directories are located in the Siebel Server installation XMLP directory (SIEBSRVR_ROOT\XMLP).
2 3
Create the XLIFF file for English with the same name as the report layout template file (opptylist.xlf) and put it in the ENU subdirectory (SIEBSRVR_ROOT\XMLP\ENU\opptylist.xlf). Create a non-English XLIFF file by doing the following:
Copy the opptylist.xlf file (from the ENU directory) to the target language directory. For example, if the target language is French, you would copy opptylist.xlf to the SIEBSRVR_ROOT\XMLP\FRA directory.
In the target directory, edit the opptylist.xlf file to modify the file target-language attribute from EN-US to the target language. For example, file source-language="EN-US" target-language="FR-FR"
Change the elements from source to the desired language. For example, the source is English, the target element is French, therefore the element is translated to French: <source>Name</source> <target>Nom</target>
For more information about XLIFF creation, see About Report Translation on page 80.
Log in to the Oracle BI Publisher Server to review the structure of the registration. Each XLIFF is registered using the format TemplateName_language code_TERRITORY CODE.xlf. For more information about translation naming conventions, see Oracle Business Intelligence Publisher Report Designer's Guide on Oracle Technology Network (OTN). After the report layout template is in the TEMPLATES subdirectory and the XLIFFS are in the language subfolders, then you can upload the report to the Siebel client. Register the report, add the languages to the XLIFF translation applet, and then click Upload. The report layout template and the associated XLIFF translation files are now registered.
5 6
78
Administering Siebel Reports Adding and Deleting Languages from Report Templates
Log in to the Oracle BI Publisher Server to review the structure of the registration. Each XLIFF is registered using the format TemplateName_<language code>_<TERRITORY CODE>.xlf.
Related Topics About Working with Multilingual Reports on page 75 Designing Multilingual Reports on page 77 Adding and Deleting Languages from Report Templates on page 79 About Report Translation on page 80
3 4 5
In the appropriate Template list, select the report to which you want to add a language. In the Translations subview, click New. In the Language field, add a new language, and then click OK.
79
3 4
In the Report Template Registration list, select the report from which you want to delete a language. In the Translations list, choose a language, and then click Delete. NOTE: This step removes only the language from the report; it does not remove the report.
Related Topics About Working with Multilingual Reports on page 75 Designing Multilingual Reports on page 77 Example of Uploading Multilingual Reports to the Siebel Application on page 78 About Report Translation on page 80
Related Topics About Working with Multilingual Reports on page 75 Designing Multilingual Reports on page 77 Example of Uploading Multilingual Reports to the Siebel Application on page 78 Adding and Deleting Languages from Report Templates on page 79
80
Administering Siebel Reports Setting the Report Execution Waiting Period for Reports
Setting the Report Execution Waiting Period for Reports on page 81 Setting the Server Request Processor Database Polling Interval for Siebel Reports on page 82 Setting Concurrency Parameters for Siebel Reports on page 82 Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes on page 84
NOTE: Most of these tasks are applicable only when the client is in connected mode unless noted otherwise.
Related Topics Setting the Server Request Processor Database Polling Interval for Siebel Reports Setting Concurrency Parameters for Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
81
Administering Siebel Reports Setting the Server Request Processor Database Polling Interval for Siebel Reports
Setting the Server Request Processor Database Polling Interval for Siebel Reports
To optimize the performance of Siebel Reports, it is recommended you change the Database Polling Interval parameter for the Server Request Processor (SRProc) server component. This parameter defines how long to wait before SRProc polls the database again when the current polling does not get requests. NOTE: This parameter is hidden by default and does not appear in either the Siebel Server Manager GUI or the Siebel Server Manager command-line interface program. This task is a step in Roadmap for Optimizing the Performance of Siebel Reports on page 80. Use the following procedure to set the Database Polling Interval server component parameter.
To set the Server Request Processor database polling interval for Siebel Reports 1 2 3 4 5
Navigate to the Administration - Server Configuration screen, Servers, and then the Components view. In the Components list, select Server Request Processor (alias SRProc). Scroll down, click the Parameters subview, and then click Hidden. In the Parameter list, select Database Polling Interval, and change the value from 10 to 1. The Value on Restart and Default Values are updated as well. Restart the Siebel Server. Alternatively, you can use the srvrmgr command-line interface to restart the SRProc component For more information about setting the server component parameters and restarting the Siebel Server and server components, see Siebel System Administration Guide.
Related Topics Setting the Report Execution Waiting Period for Reports Setting Concurrency Parameters for Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
82
This task is a step in Roadmap for Optimizing the Performance of Siebel Reports on page 80.
a b
For the Maximum Tasks parameter, change the Value on Restart to 100. For the Maximum MT Servers parameter, change the Value on Restart to 2.
Related Topics Setting the Report Execution Waiting Period for Reports Setting the Server Request Processor Database Polling Interval for Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
83
Administering Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
To optimize Siebel Reports generation performance with large data volumes (greater than 10,000 records), it is recommended that you adjust the DSMaxFetchArraySize profile parameter. This task is a step in Roadmap for Optimizing the Performance of Siebel Reports on page 80 and is applicable to connected mode. CAUTION: It is recommended that you perform the following procedure on a separate named subsystem (for example, reportsdatascr) that is used only by the XMLP Report Server component. Otherwise, the Application Object Manager (AOM) on the client computer might fail when retrieving large amounts of data. To optimize the generation performance of Siebel Reports for large data volumes, perform the following tasks:
1 2 3 4
Set the DSMaxFetchArraySize profile configuration parameter value to -1. For instructions for setting this parameter, see 1064043.1 (Article ID) on My Oracle Support. Enabling Scalable Mode for Siebel Reports on page 84. Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports on page 86. Increasing EAI HTTP Transport Sleep Time for Siebel Reports on page 87.
For more information about setting server profile parameters, see Siebel System Administration Guide. NOTE: It is recommended that you not execute reports with large data volumes as an immediate report request. Instead, schedule these reports on the Oracle BI Publisher Server.
Related Topics Setting the Report Execution Waiting Period for Reports Setting the Server Request Processor Database Polling Interval for Siebel Reports Setting Concurrency Parameters for Siebel Reports
84
Administering Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
This task is a step in Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes on page 84 and is applicable to connected mode. NOTE: It is recommended that you only enable scalable mode when viewing large reports online with a high concurrent report usage because this mode consumes more resources and might impact overall performance. If large reports are more common than not in your deployment, then set the scalable mode for all reports. Setting the scalable option prepares the FO processor to handle large data, longer processing times, time-outs, and so on. Although scalable mode is a relatively slower process, this mode makes sure there is no data loss even if the report is complex.
Save the xdo.cfg file. The following is a sample xdo.cfg file: <config version="1.0.0" <!-- Properties --> <properties> <!-- System level properties --> <!-- PLEASE uncomment this property and set it to a valid temp directory path. --> <property name="system-temp-dir">D:\Temp</property> <property name="xslt-scalable">true</property> </properties> <!-- Font setting --> <fonts> <!-- Font setting (for FO to PDF etc...) --> <font family="Arial" style="normal" weight="normal"> <truetype path="/fonts/Arial.ttf" /> </font> <font family="Default" style="normal" weight="normal"> <truetype path="/fonts/ALBANWTJ.ttf" /> xmlns="http://xmlns.oracle.com/oxp/config/">
85
Administering Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
</font> <!-- Font substitute setting (for PDFForm filling etc...) --> <font-substitute name="MSGothic"> <truetype path="/fonts/msgothic.ttc" ttcno="0" /> </font-substitute> </fonts> <currency-formats> <currency code="USD" mask="FM9G990D00"/> <currency code="JPY" mask="FMFM9G990"/> <currency code="ILS" mask="FM9G990D00"/> <currency code="EUR" mask="FM9G990D00"/> <currency code="TRK" mask="FM9G990D00"/> </currency-formats> </config> Related Topics Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports Increasing EAI HTTP Transport Sleep Time for Siebel Reports
Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports
To benefit reports generation, configure a temporary directory for the Oracle BI Publisher Server. This temporary space allows you to build complex reports that you can clean up after the reports are generated. This task is a step in Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes on page 84 and is applicable to connected mode.
To configure a temporary directory on the Oracle BI Publisher Server for Siebel Reports 1 2
Navigate to the ORACLE_HOME\xmlp\XMLP\Admin\Configuration directory. NOTE: The path for the Java installation folder varies depending on where you installed JRE. Open the xdo.cfg file, and in the <Properties></Properties> tag, use the following syntax to set the temporary directory:
86
Administering Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
<property name="system-temp-dir">d:\tmp</property> NOTE: Make sure the location of the temporary directory has adequate space for the temporary files.
Related Topics Enabling Scalable Mode for Siebel Reports Increasing EAI HTTP Transport Sleep Time for Siebel Reports
Related Topics Enabling Scalable Mode for Siebel Reports Configuring a Temporary Directory on the Oracle BI Publisher Server for Siebel Reports
87
Administering Siebel Reports Process of Optimizing the Generation Performance of Siebel Reports for Large Data Volumes
88
Generating Reports
This chapter describes how to generate, view, monitor, and delete reports in Siebel Business Applications from a user perspective. It includes the following topics: About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97
Figure 6.
89
Related Topics Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97
Choosing a Report to Generate A sales representative generates a series of account and opportunity reports periodically. These reports include: Account List, Pipeline Analysis, and Opportunity Marketing Events Summary. They provide a view of her current pipeline and other account-related activities. Today, the sales representative decides to generate the Account List report. She navigates to the Accounts view, and then clicks Reports. From the resulting Reports menu, she can choose a report. In this case, she chooses Account List in the BI Publisher (BIP) section of the Reports menu.
Choosing the Report Output Type and Monitoring Status Next, the sales representative is prompted to choose a report output type. In this case, she chooses PDF, which automatically triggers the report to start generating data. After successful completion, the report appears in the chosen format, where she can either open or save the report. However, if the report takes a while to render, a message appears indicating that she must access the report from the My Reports view. From the My Reports view, she can monitor the status of the report and eventually access the report when the status shows Success.
90
Accessing a Generated Report After several weeks, the sales representative decides she wants to take another look at this Account List report. She accesses the report directly from the My Reports view by drilling down on the report that she wants to see. After she drills down on the Account List report, the File Download dialog box appears from which she can choose to open the report, save the report, or cancel the request. If she chooses to open the report, the report appears.
Related Topics About Generating Reports on page 89 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97
91
Generating Reports
You generate reports using the Siebel application views and the Reports menu. Figure 7 shows the tasks for generating Siebel Reports.
Figure 7.
Report Generation
(Optional) Override the default report language and local by setting user preferences. For information about overriding user preferences for report generation, see Setting Language and Locale User Preferences for Reports on page 97. For information about how languages and locale settings are implemented in Siebel Reports, see About Working with Multilingual Reports on page 75.
Navigate to the Siebel application view from which you want to generate a report, run a query to limit the number of returned records, and then click Reports. TIP: It is strongly recommended that you perform a query before generating a report. Performing a query will limit the number of returned records for the report.
From the Reports menu, you choose to either generate a report or schedule a report.
92
Generate a report from the BI Publisher listing, you designate a report output file type, and then click Submit. Additionally, if this is a parameterized report, you have the option to select more criteria before selecting the report output file type. NOTE: Optionally, you can choose a different language and locale rather than accept the defaults.
Select My BI Publisher Reports, you can choose a report that you previously generated by drilling down on it from the My Reports view. Schedule a report, you choose the report name, the output type, and other scheduling criteria from the Schedule a Report dialog box.
If you chose a report from the BI Publisher section or drilled down on a report from the My Reports view, from the File Download dialog box, you can choose to:
Open the report. The report downloads and appears in a browser window in the format you chose in Step 4. The report output file types are: PDF, HTML, RTF, EXCEL, PPT, and MHTML. The PPT and MHTML output file types are available only in connected mode. For more information about the report output file types, see Siebel Reports Output File Types on page 22.
Save the report. You can save the report to a destination of your choosing, and then Open it for viewing immediately or at a later time.
If you chose to schedule a report, you can view or monitor the report job in the Scheduled Reports view. NOTE: The actual report is stored in the Oracle BI Publisher repository.
You can continue to generate or schedule reports in other formats or click Close to end.
NOTE: If a report encounters errors while generating, a log file is created that the report developers or administrators can use to troubleshoot the problem. For more information about troubleshooting reports, see Chapter 12, Troubleshooting Siebel Reports.
Related Topics About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97 Scheduling Reports on page 123
93
2 3 4
Run a query to limit the number of records returned, and then click Reports. From the BI Publisher section of the Reports menu, select the By Sales Rep report. In the Select the Report Output Type dialog box, choose PDF, and then click Submit. The By Sales Rep report Opportunity appears in a browser window, prompting you to open, save, or cancel the request.
Click Open. The By Sales Rep Opportunity report appears in PDF format in a new browser window, from which you can choose to print, save, or cancel the report.
Related Topics About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97
94
In the appropriate reports list, look for the report that you want to monitor, and then review the Status field for that report. The status indicators are: In Progress, Success, and Error as described in the following table. Field Owner Status Description User ID of the person who generated the report. Indicates: In Progress when a report is currently generating. Success when a report generates successfully. Error when a report encounters errors while generating. To troubleshoot, see Chapter 12, Troubleshooting Siebel Reports.
TIP: The timestamp for a report is the submit time on the Siebel Server. If a user submits a report when the XMLP Report Server component is not enabled, the report appears with a blank status in the My Reports view. Then, when the XLMP Report Server component is enabled, the report immediately shows a status of In Progress. However, the status might not appear long enough for you to view it. This behavior is because typically the In Progress status disappears after only a few seconds and is replaced with a status of Success. The My Reports view allows you to monitor the progress of a currently generating report.
If the report shows a status of Success, you can drill down on the report to view it or save it.
Related Topics About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97
95
Position-based visibility applies to generated reports, that is, a users position specifies which reports that user has access to. For more information about positions and visibility in Siebel Business Applications, see Siebel Security Guide. NOTE: This topic is not applicable to scheduled reports. For information about viewing scheduled reports, see Monitoring and Viewing Scheduled Reports on page 127.
In the appropriate reports list, drill down on the report name that you want to view. TIP: You can perform a query on any of the fields to find multiple reports.
Click Open to view the file. The report appears in a new browser window where you can print or save it.
Click Save to save the file. The Save As dialog box appears where you can browse to find a location to save the file.
Related Topics About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Deleting Reports on page 97 Setting Language and Locale User Preferences for Reports on page 97
96
Deleting Reports
This topic describes how to delete unwanted reports. You can delete reports that you have personally generated or have been granted access to. After a report is deleted, it is no longer available in the Siebel File System. NOTE: This topic is not applicable to scheduled reports. For information about deleting scheduled reports, see Deleting Scheduled Reports on page 129.
To delete a report 1
Navigate to the BI Publisher Reports screen, then to one of the following views:
In the appropriate reports list, select a report, and then click Delete.
Related Topics About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Setting Language and Locale User Preferences for Reports on page 97
97
Generating Reports Setting Language and Locale User Preferences for Reports
Change the Locale and Language properties to the language of your choice.
NOTE: Setting user preferences allows you to generate reports in the language and locale you specified as long as there is no default language or locale set in the report layout template.
Related Topics About Generating Reports on page 89 Scenario for Generating Reports on page 90 Generating Reports on page 92 Example of Generating an Opportunity Report on page 94 Monitoring the Status of Currently Generating Reports on page 94 Viewing Generated Reports on page 96 Deleting Reports on page 97
98
Creating Reports
This chapter describes how to create reports. It is intended only for those who have report developer or administrator privileges. NOTE: Most users do not typically have access to the administration views in the Siebel application, and as such, are not able to perform the tasks in this chapter. For information about reporting from the user perspective, see Chapter 6, Generating Reports and Chapter 8, Scheduling Reports. This chapter includes the following topics: Scenario for Creating Reports on page 99 About Integration Objects in Siebel Reports on page 100 About Reporting Across Multiple Siebel Business Objects on page 101 Workflow for Uploading Report Layout Templates to a Siebel Application on page 102 About Registering and Sharing Report Layout Templates on page 104 About Multiorganizational Report Templates on page 104 Scenario for Report Template Visibility Across Organizations on page 105 Should You Clone an Existing Report or Create Custom Reports? on page 105 Process of Creating Custom Reports on page 106
Sales Manager Generates Daily Sales Reports A sales manager has a team of five sales representatives for the western region of a company. Every day he generates a series of reports, including Opportunity by Sales Rep, Account List, and Forecast Analysis Details to get the latest, current-account activities, and forecasted revenues for his sales representatives. These reports are view-based and available from the Reports menu in the Siebel application.
99
Sales Manager Modifies an Existing Sales Report to Hand Off to the Report Developer These reports give the sales manager a good understanding of the opportunities in the pipeline for each sales representative on his team, and allows him to monitor how they are progressing through the sales cycle. Towards the end of the quarter, he wants to know how much potential revenue his team might be able to close for the quarter. To learn that information, he wants to see a revenue breakdown for the teams opportunities by probability and sales stage. He knows, however, that no such report is currently available, but realizes that the reports developer can create such a report for him. Because the sales manager wants the report to have a certain look, he starts creating a preliminary opportunity report himself using Oracle Business Intelligence Publisher Add-in for Microsoft Word. When he is satisfied with the report layout template design, he hands off the template to the report developer.
Sales Manager Generates the New Sales Report After the reports developer finalizes the custom report, the sales manager can choose the report from the Reports menu while in an Opportunity view. After choosing a report output type, the report appears in a browser window, from which the sales manager can open or save the report. However, if the report takes a while to render, a message appears indicating that he must access the report from the My Reports view. From this view, he can monitor the status of the report and eventually access the report when the status shows Success. For more information about report output file types, see Siebel Reports Output File Types on page 22. For more information about the My Reports view, see About Using Siebel Reports on page 22.
100
Integration objects in general, see Integration Platform Technologies: Siebel Enterprise Application Integration.
NOTE: It is recommended that you test search specifications for multiple integration objects in a relevant application view to make sure the search specification is valid before applying the specification to a report in the applicable report template view. For information about adding multiple integration objects to reports, see Adding Multiple Integration Objects to a Report on page 117.
10 1
Creating Reports Workflow for Uploading Report Layout Templates to a Siebel Application
Figure 8.
How the Layout Template and Translation Files Are Uploaded from Oracle Business Intelligence Publisher Add-in for Microsoft Word to Generate Reports
102
Creating Reports Workflow for Uploading Report Layout Templates to a Siebel Application
From the report template views (My Templates and All Templates Across Organizations), the RTF report layout template and translation (XLIFF) files are uploaded using an upload business service to the Oracle BI Publisher repository as follows:
In connected mode, the upload service occurs by way of the PublicReportServiceService Web service. For more information about connected mode, see Siebel Reports Architecture and Workflow for Generating Reports in Connected Mode on page 28. To upload the report to the Oracle BI Publisher repository, the following must occur:
The report layout template must have been saved in RTF format using Oracle Business Intelligence Publisher Add-in for Microsoft Word. You must click Upload Files in the report template views in the Siebel application. The RTF and XLIFF files are uploaded and an XDO report definition file is created when the reports are generating. The report layout template (RTF) and language (XLIFF) files are attached to the report during the registration of the report layout template.
NOTE: The Generate XLIFF button is disabled (grayed out) in connected mode.
Before moving to the Oracle BI Publisher repository, the layout template (RTF) and XLIFF files are attached to the report during the registration of the layout template.
In disconnected mode, the upload service is not applicable. All files (RTF, XLIFF, and XSL) are local to the Oracle BI Publisher XDO Engine when generating reports after. For more information about generating reports in disconnected mode, see Siebel Reports Architecture and Workflow for Generating Reports in Disconnected Mode on page 30. For disconnected mode, you must click Generate XLIFF to create XSL. (Whereas in connected mode, XSL is generated at run time by the Oracle BI Publisher Server.) NOTE: The Upload Files button is disabled (grayed out) in disconnected mode.
2 3
For connected mode, the RTF and XLIFF files are stored in the Oracle BI Publisher repository by way of the PublicReportServiceService Web service. In disconnected mode, the report templates and XLIFF files are stored in the Siebel client installation folder (that is, SIEBEL_ROOT_CLIENT\xmlp\templates and SIEBEL_ROOT_CLIENT\xmlp\XLIFF, respectively).
For more information about uploading from Oracle Business Intelligence Publisher Add-in for Microsoft Word, see Registering Report Layout Templates on page 114.
10 3
104
Custom templates he has created in the My Templates View. These templates have only a default organization. Custom templates that are explicitly associated to the Holland organization, given his current active position organization is Holland.
Custom templates he has created in the My Template View or templates his subordinates have created that appear in the My Teams view. These templates have only a default organization. Custom templates that are explicitly associated to the Benelux organization, given his current active position organization is Benelux. Custom templates created by both Holland and Belgium organizations because the manager can see report templates created by his subordinates regardless of whether the subordinate is in a different organization.
When your requirements are not satisfied by an existing report and there are significant differences between the report that you want and an existing report, create a custom report. The following are some situations in which you must create a custom report: When the report requires a new integration object
10 5
When the report requires a new integration component for an existing integration object. For example, you create a new report for a view that belongs to the same business object.
106
Figure 9 shows the process of creating custom reports. The roadmap is applicable to both connected and disconnected modes. For more information about the connection modes in relation to Siebel Reports, see Chapter 3, Siebel Reports Development Environment.
Figure 9.
Figure 9 illustrates the high-level tasks you perform when creating custom reports:
1 2
(Optional) Extending Integration Objects to Add New Fields for Siebel Reports on page 109 (Optional) Creating New Integration Objects for Siebel Reports on page 110 NOTE: Create new integration objects only when no appropriate integration object exists.
10 7
Generating Sample XML Data Files for Siebel Reports on page 112 Using the Sample Data File Generation view in the Siebel client, in this step the following tasks are performed:
a b
Select an integration object for the report. Generate the sample XML data file, and then save it.
NOTE: The XML data file is typically saved to the XMLP\DATA directory in the Siebel File System. You can however, save the XML to another location. For more information about the Siebel Reports directory structure, see About the Siebel Reports Architecture on page 27.
Creating Report Layout Templates Using Oracle Business Intelligence Publisher Add-in for Microsoft Word on page 113 In this step, you either modify an existing report layout template or create a new one, and then do the following:
a b c 5
Assign the Siebel fields in the report layout template. Save the report layout template to RTF. Periodically preview the report layout template to verify it appears as designed.
Registering Report Layout Templates on page 114 Using the template views (Reports - Custom Templates or Reports - Standard Templates), in this step do the following:
a b c d e 6
Create a new report. Select a report layout template. Assign an integration object. Select an output file type. (Optional) Select a default language and locale, report access control, and so on.
(Optional) Adding Multiple Integration Objects to a Report on page 117 In this step, you add new integration objects to a report, and the generate sample XML.
(Optional) Sharing Report Layout Templates on page 118 In this step, you grant report access to others by adding positions.
(Optional) Defining Report Layout Templates for Selected Records on page 119 In this step, you click the Selected Records field to configure a report template to display only the currently selected records in a Siebel application view when a report is generated.
10 (Optional) Changing the Report Sequence Order in the Reports Menu on page 120
Using the Association View, in this step you can define the way reports are ordered or prevent them from appearing in the Reports menu.
108
a b c
Navigate to the Administration - BI Publisher Reports screen, then the relevant report template view (either the Reports - Custom Templates view or Reports - Standard Templates view). Select the report for which you want to add a new field. In the Primary Integration Object Name column, identify and make note of the integration object for this report. NOTE: Integration objects for reports begin with BIP.
a b
Log in to Siebel Tools. In the Object Explorer, select and expand Integration Object. TIP: Integration objects do not appear in the Object Explorer by default. Click the View menu, Options, and then the Object Explorer tab to add the integration objects to the Object Explorer view.
c d e
Query for the integration object associated with the report. Expand the Integration Component and Integration Component Field object types to view the existing fields associated with this integration component. Create a new integration component field record and copy the Name, Data Type, and Length properties from the underlying business component field whose data you want to display in the report. Set the XML-related properties to construct the XML file when data is extracted. NOTE: You must follow the convention for naming XML tags, that is, remove all spaces and special characters. However, it is not a requirement that you use the ss_ prefix convention.
10 9
Right-click the integration object you want to deploy, and then select Deploy to Runtime Database. NOTE: This action overrides the object definition in the SRF file.
c d e f
In the Siebel client, Navigate to the Administration - Web Services screen, then the Deployed Integration Objects view. Query for the integration object to verify it was deployed. Navigate to the Administration - Web Services screen, Inbound Web Services view. Click Clear Cache to update the run-time database.
The extended integration object is now available for generating a new sample data file. For information about generating sample data files, see Generating Sample XML Data Files for Siebel Reports on page 112. For more information about working with and deploying integration objects, see Integration Platform Technologies: Siebel Enterprise Application Integration.
110
Use the Integration Object Builder wizard to create the new integration object, making sure to name the new object definition with the prefix, BIP. By default, you must add the BIP prefix so that integration objects appear in the Sample Data File Generation view. NOTE: It is recommended that if you use this wizard for creating integration objects, that you deactivate only the required business component fields for the report. By default, the wizard automatically adds all business component fields in the integration component. A large amount of fields in an integration component might affect performance. Typically, you add to an integration component only the fields that are required in the report. You must also add to the integration component fields in the user interface that are required for querying and filtering the data before executing the report.
Deploy the integration object to the run-time database by doing the following:
a b c d 4
In the Object Explorer in Siebel Tools, select Integration Object. In the Integration Object list, right-click the integration object you want to deploy, and then select Deploy to Runtime Database. In the Siebel client, navigate to the Administration - Web Services screen, then the Inbound Web Services view. Click Clear Cache to invalidate the integration object and Web services definitions in the run-time database.
(Optional) Generate a new sample data file for the integration object for use when designing your report templates.
This newly created integration object is now available in the Sample Data File Generation view for creating custom reports. For information about generating sample data files, see Generating Sample XML Data Files for Siebel Reports on page 112. For more information about integration objects and deploying an integration object without compiling an SRF, see Integration Platform Technologies: Siebel Enterprise Application Integration.
11 1
112
Creating Report Layout Templates Using Oracle Business Intelligence Publisher Add-in for Microsoft Word
This topic describes how to create report layout templates for reports using Oracle Business Intelligence Publisher Add-in for Microsoft Word. This task is a step in Process of Creating Custom Reports on page 106. NOTE: It is recommended that you use Oracle Business Intelligence Publisher Add-in for Microsoft Word to create your custom RTF-formatted report layout templates. If you use other RTF-formatted templates for creating your reports, you must manually code the XSL statements and references to the data fields. Coding XSL is out of scope for this documentation. CAUTION: Oracle BI Publisher does not support report names containing special characters. The following are some situations in which you must create a new report layout template: When a layout template requires that you add new fields or design a different layout When a layout template requires association with a different integration component for the specified integration object When a layout template requires association with a different or multiple integration objects
The following procedure assumes you have installed Oracle Business Intelligence Publisher Add-in for Microsoft Word (also known as Oracle BI Publisher Desktop). This procedure provides only quick reference information for creating report layout templates. For detailed information, see Oracle Business Intelligence Publisher Users Guide, which is available from the Oracle BI Publisher Desktop program menu (click Start, Programs, Oracle BI Publisher Desktop, and then BI Publisher Users Guide).
To create a report layout template using Oracle Business Intelligence Publisher Addin for Microsoft Word 1 2 3
Start Microsoft Word. From the application-level menu in Microsoft Word, select Oracle BI Publisher, Data, and then Load Sample XML Data. In the Select XML Data window, select the XML data file. NOTE: Typically, the XML data files reside in the XMLP\DATA directory on which the Siebel Server is running.
Define the format of the report and the Siebel fields that you want to appear in the report, using the Template Wizard as follows:
a b c
From the Microsoft Word toolbar, choose Insert, Table/Form, and then Wizard. In the Template Wizard, choose the report format, and then click Next. You can choose one of the following: Table, Form, or Free Form. (Optional) Change the XML data grouping, and then click Next.
11 3
d e f g
Select the Siebel fields that you want to appear in your report, and then click Next. If the data is to appear in Table format, decide the grouping and sorting, and then click Next. Label the Siebel fields as you want them to appear in the new report, and then click Finish. Save the report layout template in RTF format. The following files are created and stored in the Siebel File System for retrieval by the Siebel application as follows:
The report layout template (RTF) and XLIFF files in connected mode The XSL and XLIFF files in disconnected mode
In Microsoft Word, open the RTF template file (if not already open). NOTE: Typically, the template files are stored in SIEBSRVR_ROOT\XMLP\TEMPLATES.
From the application-level menu, select Oracle BI Publisher, Preview Template, and then choose the output file format. The report appears in the chosen format with the data substituted.
c d
(Optional) Continue to preview different output file formats. Save the file in RTF format.
If you are currently creating a report for which you want to use this report layout template, you must register the report layout template in the Siebel application, see Registering Report Layout Templates on page 114. NOTE: Additional report template creation information is provided in Oracle Business Intelligence Publisher Report Designer's Guide in the Oracle Business Intelligence Publisher Documentation Library 10.1.3.4 available on Oracle Technology Network (OTN). Not all features mentioned in the Oracle Business Intelligence Publisher documentation are currently supported in Siebel Reports; only the features documented in this guide.
114
In connected mode, the Oracle BI Publisher Server requires the RTF and XLIFF files in its folder structure. If the files are not available, the report is not generated. When the upload is successful, a new folder structure is created in the Oracle BI Publisher repository. This folder has the same name as the report selected and contains the report layout template (RTF), XLIFF, and .xdo files. The Oracle BI Publisher Server creates the XSL file during run time. In disconnected mode, the RTF, XLIFF, and XSL files must be made available (by uploading the files to the Oracle BI Publisher XDO Engine) before the reports are generated. For more information about uploading report layout templates to the Siebel application, see Workflow for Uploading Report Layout Templates to a Siebel Application on page 102. NOTE: If you are uploading new or modified report layout templates in a multiple Siebel Server environment, see also Uploading New or Modified Report Layout Templates for Multiple Siebel Server Environments on page 70. If you are uploading multilingual reports, see also Example of Uploading Multilingual Reports to the Siebel Application on page 78.
a b
Click Start, Programs, and then Oracle - BIPHomeX. Choose Start BI Publisher. A command window appears. NOTE: You must leave this command window open while the Oracle BI Publisher Server is running.
In the Siebel application, navigate to the Administration - BI Publisher Reports screen, then one of the following template views:
3 4
In the appropriate templates list, click New. Register the report layout template for the report by doing the following:
a b c d e
Type a report name and optionally a description. Select a report layout template. Select an output type. (Optional) Select an existing XLIFF file. (Optional) Assign a position or positions in the Report Access field. NOTE: The Report Access field is available only in the Reports - Custom Templates view to allow for sharing of generated reports.
11 5
Fill in the rest of the fields. The fields are described in the following table. Field Start Date1 Description A start date and time for the report. For preconfigured reports that ship with Siebel Business Applications, there is no start date. For reports that you create, the Start Date field automatically populates with the current date and time when the report layout template was registered. However, you can change these values any time. End Date1 Primary Integration Object Name Template An end date for the report. After the end date passes, the report no longer appears in the Reports menu. By default, this field is NULL. The primary integration object for the report. This field is read-only and is automatically populated when you select an integration object in the report template Integration Objects subview. The RTF report layout template that is used to generate the report. Templates are stored in the following folder:
SIEBSRVR_ROOT\XMLP\TEMPLATES
Output Type The format of the generated report, which can be one of the following: PDF, HTML, RTF, XLS, PPT, MHTML, or All. NOTE: If a report is saved with only one report output type, the Report Output Type dialog box does not appear when the user selects that report in the Reports menu. Instead, the report begins generating in the assigned format. Typically, the output type is set to All. PPT is applicable only in connected mode. Default Language Default Locale XLIFF The default language for the template. The default locale for the template. XLIFF files contain the strings of the report column, field labels, and captions that are used for translation purposes. NOTE: If you change a report layout template and upload the template to a Siebel client, you must regenerate the report. Report Access Controls access to generated reports using positions. NOTE: The Report Access field is available only in the Reports Custom Templates view to allow for sharing of generated reports. Selected Records Indicates that only the currently selected records in a Siebel application view are included in the report at run time. For more information about how to use the selected records feature, see Defining Report Layout Templates for Selected Records on page 119.
1.
The start and end dates determine the period that a report is available for use. If you choose a start date, you must also choose an end date. Conversely, if you choose an end date, you must also choose a start date.
116
Associate a primary integration object with the report by doing the following:
a b
In the relevant Integration Objects subview, click New. Fill in the fields in the new record. The fields are described in the following table. Field Integration Object Name Search Specification Description The integration object that you want to associate with the report layout template. A query data filter. When you create a nonprimary integration object for a report, you must enter a search specification value. For example, the value of the search specification might be the following expression: [Status] = 'Closed' NOTE: This field is not required for primary integration objects, because queries are taken from the Siebel application views. For more information about multiple integration objects with regard to Siebel Reports, see About Reporting Across Multiple Siebel Business Objects on page 101. Primary Indicates that this integration object is the primary integration object. The Primary Integration Object Name field in the template views are automatically populated when you select a primary integration object. NOTE: The first integration object that you associate with a report is automatically indicated as the primary integration object.
c 6 7
(Optional) Click Generate Sample XML for use when designing reports.
(Optional) If you want to generate reports for multiple business objects, perform the tasks as described in Adding Multiple Integration Objects to a Report on page 117. (Optional) Assign a language or languages to the report layout template. For information about assigning languages to report layout templates, see Adding and Deleting Languages from Report Templates on page 79.
You must now associate the registered report with the views in which you want the report to be available. For more information on associating reports, see Associating Registered Reports with Siebel Application Views on page 120.
11 7
The following procedure assumes that you have registered or are in the process of registering a report layout template, as described in Registering Report Layout Templates on page 114.
2 3
In the relevant report template view, select a report (if not already selected). In the Integration Objects subview, click New. NOTE: Custom integration objects previously created appear as well as the preconfigured integration objects that ship with the Siebel application. One of the integration objects is indicated as primary. This Primary field is automatically indicated when associating an integration object with a report for the first time.
Fill in the fields in the new record. The fields are described in Step 5 in Registering Report Layout Templates on page 114.
5 6
Repeat Step 3 and Step 4 of this procedure for each additional integration object that you want to add. Click Generate Sample XML. One XML data file is generated for the multiple integration objects. NOTE: This step is similar to what occurs in Generating Sample XML Data Files for Siebel Reports on page 112, but in the Sample Data File Generation view, you can generate XML for only one integration object.
If you are currently creating a report, you must now associate the registered report with a Siebel application view. See Associating Registered Reports with Siebel Application Views on page 120.
118
Query for an existing report. Click New to register a new report. For information about registering a new report, see Registering Report Layout Templates on page 114.
a b
Click the Report Access field to display the Position dialog box. In the Position dialog box, select the positions that you want to grant access to the report, and then click Add. NOTE: You can select multiple positions by using the CTRL key.
You can define multiorganizational templates by adding a specific organization or organizations to the report template in the organizations multi-value group (MVG). You select multiple records using the shift or control keys. NOTE: By default, custom templates belong to the default organization. However, for standard templates, no default organization is defined. You must manually define visibility for standard templates.
In the appropriate templates list, select the report for which you want to enable the single or multiselect feature, and then click the Selected Records field.
11 9
a b c
Choose a report name and optionally a description. (Optional) Assign a sequence number. Click OK.
The report is now available in the Reports menu when a user is in a view with which the report is associated and the user has visibility to that view.
Test the newly created report by generating it. For information about generating reports, see Chapter 6, Generating Reports. NOTE: If a report encounters errors while generating, a log file is created that report developers and administrators can use to troubleshoot the problem. For more information about troubleshooting reports, see Chapter 12, Troubleshooting Siebel Reports.
120
Reports with a positive integer sequence value are sorted by the sequence value and ordered before any report with a NULL sequence value. If two or more records have the same sequence value, the records are sorted by name.
TIP: Because the Sequence field is a standard, numeric-business component field, you can add your own business logic for how reports appear in the application. For more information about configuring business components, see Configuring Siebel Business Applications.
12 1
122
Scheduling Reports
This chapter describes how to schedule reports in Siebel Business Applications from a user perspective. It includes the following topics: About Scheduled Reports on page 123 Scheduling Reports on page 124 Example of Scheduling an Opportunity Report on page 126 Monitoring and Viewing Scheduled Reports on page 127 Suspending and Resuming Scheduled Reports on page 128 Deleting Scheduled Reports on page 129
Related Topics Scheduling Reports on page 124 Example of Scheduling an Opportunity Report on page 126 Monitoring and Viewing Scheduled Reports on page 127 Suspending and Resuming Scheduled Reports on page 128 Deleting Scheduled Reports on page 129
12 3
Scheduling Reports
You schedule reports by selecting the Schedule Report menu item from the Reports menu while in a Siebel application view. If you have been granted scheduling privileges, you can schedule reports using various criteria. Report scheduling is available only in connected mode. For more information about the connection modes in relation to Siebel Reports, see About the Siebel Reports Architecture on page 27. CAUTION: If you are unable to schedule reports, you might not have the appropriate access controls assigned. Ask your administrator to grant you the XMLP_SCHEDULER responsibility. NOTE: You cannot schedule parameterized reports. For information about parameterized reports, see Chapter 11, Parameterized Reports.
To schedule a report 1 2
Navigate to the Siebel application view from which you want to schedule a report, and click Reports. From the Reports menu, select Schedule Report. A scheduling dialog box appears.
124
Enter the schedule criteria for the report, and then click Schedule. Some fields are described in the following table. Field Report Name Job Name Description The report you want to schedule. Enter a name for the job you are scheduling. NOTE: Any descriptive text for the job name is acceptable, the job name does not have to be unique. However, for search purposes, you might want to adopt a naming convention. Output Type Report Locale Report Language Frequency The output file format for the report. For information about the available output file types, see Siebel Reports Output File Types on page 22. The locale for the report. The language for the report. The recurrence of the report. Choices are: Run Immediately, Run Once, Run Daily/Weekly, or Run Monthly. If you choose to run the report: Immediately, the job is triggered as soon as you click Schedule. Only one time, you must enter the exact date and time to run the report. Daily or weekly, you must enter the day (or days) of the week, specify the run time for the selected day (or days), and a start and end date. Monthly, you must enter the month (or months), the day (or range of days) to run, and a start and end date.
See also Run Time below. Public Save Data Save Output Run Date Run Time If checked, the output of the job is viewable by all users. By default, this field is not checked. If checked, the XML data of the job is saved and is viewable in the Scheduled Reports view. By default, this field is checked. If checked, the output of the job is saved and is viewable in the Scheduled Reports view. By default, this field is checked. The date and time the report generates when you choose the run once frequency. The time the report generates when you choose a daily/weekly or monthly frequency. NOTE: For a run once frequency, time is converted to UTC (Coordinated Universal Time). For daily, weekly, or monthly frequencies, the date, time, and time zone are based on the Oracle BI Publisher Server.
12 5
Description If a date is set in either of these fields, then it restricts the dates for which scheduling is active. By default, the start date is the date you schedule the report and the end date is NULL. A start and end date are required for the daily/weekly and monthly frequencies. The day (or days) of the week or date range you want the report to generate when you choose a daily/weekly frequency. The month (or months) you want the report to generate when you choose a monthly frequency. The day (or days) of the week or date range you want the report to generate when you choose a monthly frequency.
A message appears indicating the report (with Job ID) has been scheduled.
4 5
(Optional) Schedule another report with different criteria. Click Close to exit the scheduling dialog box. NOTE: The scheduling dialog box remains open until you close it.
Navigate to the BI Publisher Reports screen, then the Scheduled Reports view. NOTE: The Scheduled Reports view is an embedded Web page from the Oracle BI Publisher Enterprise application.
Drill down on the Job Name for more information, and then click Back if you want to view additional scheduled reports.
Related Topics About Scheduled Reports on page 123 Example of Scheduling an Opportunity Report on page 126 Monitoring and Viewing Scheduled Reports on page 127 Suspending and Resuming Scheduled Reports on page 128 Deleting Scheduled Reports on page 129
126
Report Name is By Sales Rep Opportunity Job Name is <Enter a job name> Output Type is HTML Time is Run Daily/Weekly Day of the Week is Tuesday and Thursday Start Date is 8/2/2009 End Date is 8/15/2009 Run Time is 10:15:00 AM
For descriptions of these and other fields in this dialog box, see Scheduling Reports on page 124.
(Optional) Navigate to the BI Publisher Reports screen, then the Scheduled Reports view to monitor the scheduled report. For information about monitoring and viewing your scheduled reports, see Monitoring and Viewing Scheduled Reports on page 127.
Related Topics About Scheduled Reports on page 123 Scheduling Reports on page 124 Monitoring and Viewing Scheduled Reports on page 127 Suspending and Resuming Scheduled Reports on page 128 Deleting Scheduled Reports on page 129
12 7
Click the Schedules tab to view the report jobs you have scheduled and their status. Drill down on a report to view detailed information about the report job. Click the History tab to view a history of your report jobs.
Related Topics About Scheduled Reports on page 123 Scheduling Reports on page 124 Example of Scheduling an Opportunity Report on page 126 Suspending and Resuming Scheduled Reports on page 128 Deleting Scheduled Reports on page 129
2 3
Click the Schedules tab. Click the checkbox next to the applicable report, and then click Suspend or Resume.
Related Topics About Scheduled Reports on page 123 Scheduling Reports on page 124 Example of Scheduling an Opportunity Report on page 126 Monitoring and Viewing Scheduled Reports on page 127 Deleting Scheduled Reports on page 129
128
Related Topics About Scheduled Reports on page 123 Scheduling Reports on page 124 Example of Scheduling an Opportunity Report on page 126 Monitoring and Viewing Scheduled Reports on page 127 Suspending and Resuming Scheduled Reports on page 128
12 9
130
This chapter describes master-detail reports as well as how to create a master-detail layout template. It includes the following topics: About Master-Detail Reports Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template Creating a Master-Detail Layout Template in Microsoft Word
Figure 10. Example of a Master-Detail Service Request Activity (All) Report In this example, the master-detail reports provide master information for each service request, followed by a list of activities for that service request. Each service request begins on its own page. For further analysis of the Service Request Activity - All master-detail report, see Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template on page 132. A master-detail report can also have multiple detail elements. In this case, a list of detail records appears for several business components for each master record. For example, the Account Service Profile report provides three lists for each account master record: customer survey responses, opportunities, and service requests. A report with two detail elements is described in Creating a Master-Detail Layout Template in Microsoft Word on page 136. Many of the preconfigured reports that ship with Siebel Business Applications are master-detail reports.
13 1
Using Master-Detail Reports Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template
A master detail report incorporates a parent business component and related child and grandchild business components as defined in the business object definition that the integration object is based on. When executing a report, the UI context is captured and passed to the primary integration component of the integration object. If a multivalue field (MVF) is included in a report, only the first record is displayed. To display all the records from an MVF in the report, an integration object must have been created in Siebel Tools under the associated integration object based on the business component that contains the MVF to be displayed. This information is also valid for indirect MVFs. For example, consider the case where the business address (an MVF) of an account associated with an opportunity appears in the report. The business addresses in the MVF are not directly related to the opportunity, but they are related to the account that it is associated with it. To display all the records in the business address MVF as a detail section, first create a link between the Business Address business component and the Opportunity business component using Account Id as the source field. Include the Business Address business component under the Opportunity business object, and then create an integration object with the Business Address business component under the integration object, and include the necessary MVF. For more information about master-detail reports, see Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template on page 132 and Creating a Master-Detail Layout Template in Microsoft Word on page 136.
Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template
This topic gives one example of how master-detail reports work by comparing a specific layout template with its corresponding report. You might use the feature differently, depending on your business model. This example compares the Service Request Activity (All) report and its corresponding layout template.
To compare the Service Request Activity (All) report in Siebel Service with its corresponding layout template 1
Generate the Service Request Activity (All) report in Siebel Service by performing the tasks:
a b c d e
Open the Siebel Service application. Navigate to the Service screen, then All Service Requests across Organizations view. NOTE: My Service Requests is the default view. In the All Service Requests across Organizations list, select an account, click Reports, and then from the Reports menu, select Service Request Activity (All). Choose a report output type, and then click Submit. In the File Download dialog box, select Open. The Service Request Activity (All) report appears in the browser window. To view this report, see Figure 10 on page 131.
132
Using Master-Detail Reports Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template
Open the layout template for the Service Request Activity (All) report using Microsoft Word:
Navigate to the \XMLP\TEMPLATES folder (or the equivalent on your computer), and then open srvreqaa.rtf. Notice the following features of this template as shown in the following figure:
There is a table (form) for the master record. There is a table (list) for each set of child records. There is a for-each loop (over all master records) that includes the parent form and all the child lists. There is a condition on the IF statement (<?if:current-group()//ssAction?>) for the Activity section, which prevents the Activity section from displaying header information if there are no activities for the service request.
NOTE: To identify the layout template associated with a report, use the appropriate Template view (either Reports - Custom Templates or Reports - Standard Templates in the Administration - BI Publisher Reports screen).
From the Oracle BI Publisher menu, select Tools, Field Browser, and then Show All. The Field Browser dialog box appears, which allows you to view and modify the template logic.
For more information, see Syntax and Description of the Fields for an Example Template on page 134.
13 3
Using Master-Detail Reports Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template
Table 8. Syntax If
Oracle BI Publisher Syntax and Field Definitions for the Service Request Activity (All) Report Template Oracle BI Publisher Code <?if://ssServiceRequest?> Description An IF condition that checks for service request records. If there are no service request records, no records are displayed. The start of a group section which iterates for each record in the Service Request data set. Field mappings
<?for-eachgroup:ssServiceRequest; position()?> <?ssSrNumber?> <?ssAccount?> <?ssStatus? <?if://ssCreated?> <?formatdate:psfn:totext(ssCreated, "yyyy-MM-dd'T'HH:mm:ss", "MM/dd/yyyy hh:mm:ss"); 'SHORT_TIME'?> <?end if?> <?ssSeverity?> <?ssDescription?> <?if://ssClosedDate?> <?formatdate:psfn:totext(ssClosedDa te,"yyyy-MM-dd'T'HH:mm:ss", "MM/dd/yyyy hh:mm:ss"); 'SHORT_TIME'?> <?end if?> <?ssPriority?> <?ssCustomerRefNumber?> <?ssOwner?> <?for-each:currentgroup()?>
If condition that does not display the ssCreated field if null. Field formatting
If condition that does not display the ssClosedDate field if null. Field formatting
Start of a group section, iterating for each record in the current group (for example, Service Request).
134
Using Master-Detail Reports Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template
Table 8. Syntax If
Oracle BI Publisher Syntax and Field Definitions for the Service Request Activity (All) Report Template Oracle BI Publisher Code <?if:current-group()// ssAction?> <?for-each:ssAction?> <?if://ssCreated?> <?formatdate:psfn:totext(ssCreated, "yyyy-MM-dd'T'HH:mm:ss", "MM/dd/yyyy hh:mm:ss"); 'SHORT_TIME'?> <?end if?> <?ssCreatedByName?> <?ssOwnedBy?> <?ssType?> <?ssStatus?> <?ssDescription?> <?end for-each?> <?end if?> <?end for-each?> <?split-by-page-break:?> <?end for-each-group?> <?end if?> <?if:not(// ssServiceRequest)?> <?end if?> Description Condition to check for Action records. If there are no records, do not display the section. Beginning of the repeating element group for Action. If condition that does not display the ssCreated field if null. Field formatting
for-each:ssAction If ssCreated
End ssCreatedByN ssOwnedBy sssStatussType ssDescription end for-each:ssAction End if end for-each page break end for-each-group: ssServiceRequest End If
End of the repeating element group for Action. The end of the if condition End of current-group() repeating group section. Page break after the end of the group section. End of Service Request group section End if statement for conditional check on Service Request records If condition that prints "No Data Found" at the bottom of the report if there are no records. End if statement for above condition.
End
You can view additional information about the integration object definition (and related integration components) in Siebel Tools. For information about viewing integration object definitions in Siebel Tools, see Using Siebel Tools.
13 5
For more information about Oracle BI Publisher syntax, see Oracle Business Intelligence Publisher Report Designer's Guide, Release 10.1.3.4 available on Oracle Technology Network (OTN). For more information about creating master-detail templates, see Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template on page 132 and Creating a Master-Detail Layout Template in Microsoft Word on page 136.
a b
Insert a master data section manually, or by using the Insert menu option from the Oracle BI Publisher Desktop menu. Select the master data section, and add a for-each-group section:
NOTE: This process embeds the for loop within the table and does not replicate the location of the controls in the preconfigured examples.
c 6
(Optional) If you want to view descriptive text for the inserted sections, click Tools, Options, Build, and then Descriptive.
136
b c 7 a b c 8
From the Oracle BI Publisher menu, click Insert, and then Repeating Group. Select the defaults, and then click OK.
Insert a page break after the final detail section by doing the following: Select the Oracle BI Publisher properties of the entire group. Navigate to Create, Group, and then Properties. Select a page break option.
Add the additional formatting features and conditions. For more information on adding features, see Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template on page 132.
After testing the report, register the report layout template in the usual manner. For information about registering report layout templates, see Registering Report Layout Templates on page 114.
For more information about master-detail reports, see About Master-Detail Reports on page 131 and Example of Comparing the Service Request Activity (All) Report with its Corresponding Layout Template on page 132.
13 7
138
10 Migrating Reports
This chapter describes how to migrate reports from a development, test, or production environment to another. The tasks in this chapter are performed by the system administrator and are for disconnected mode only. This chapter includes the following topics: Requirements for Migrating Reports on page 139 Process of Packaging and Migrating Reports on page 140 Process of Migrating an Integration Object for a Report on page 144 Process of Migrating New Reports after Creating New Integration Objects on page 145
1 2
In the source environment, make sure the reports are finalized and ready to migrate. Perform the following in the source environment:
a b
Install Perl software (version 5.0 or later). Make sure you include the Application Deployment Manager (ADM) component group as part of the Siebel Server installation process. For more information about installing Siebel Servers, see Siebel Installation Guide for the operating system you are using.
Set up ADM for your particular deployment needs. In particular, you must have a Siebel Management Server and Siebel Management Agents installed. For more information on setting up ADM, see Siebel Installation Guide for the operating system you are using.
13 9
1 2 3 4 5
Make sure you have met the necessary requirements for migrating reports. For information about these requirements, see Requirements for Migrating Reports on page 139. Packaging the Report Files in the Source Environment on page 140 Migrating the Report Files to the Target Environment on page 141 Packaging Report Database Records in the Source Environment on page 142 Migrating Report Database Records to the Target Environment on page 143
SharedFolder\PackageName\file\siebsrvr\XMLP\<subdirectory_name>
where: SharedFolder is a shared folder on the deployment computer. PackageName is the name of the ADM package folder that contains the report files to be migrated. file is the type of file, such as database, repository, and so on.
140
Copy the RTF and XSL files to the following directory: SharedFolder\PackageName\file\AppServer\XMLP\TEMPLATES
Run the following command to generate a descriptor file for the package: admpkgr generate "shared folder\package name" where: SharedFolder\PackageName is the shared folder and package name in which the packages to be migrated reside.
Run the following command to call the deploy.bat file to load the package to the server database: deploy_enterprise load username password PackageName where:
deploy_enterprise is of the form deploy_enterprise, where enterprise is replaced by the enterprise name given by the user at the time of the configuration.
14 1
username and password are the username and password account of the Siebel user who is deploying the package. PackageName is the name of the package for which the descriptor was created in Step 2 on page 141.
Run the following command to create a session for the deployment: deploy_enterprise create username password PackageName
Run the following copy command to complete the deployment of the sample package: deploy_enterprise copy username password PackageName
In the destination Siebel Server folder ( siebsrvr\XMLP), verify that the files you placed in the deployment package (as described in Step 1 on page 140) are available in the appropriate folders.
In the Deployment Filter field in the Deployment Project data type list, create search expressions for the data types to filter only those items of a data type that match the condition for migration. Save each filter. For example, if you create a report in the source environment and that report is:
Named Test Account List Based on the BIP Accounts - Current Query integration object
142
You enter the following filter information to migrate the data types to the target environment: Data Type BIP Sample Data Generation BIP Report Template Registration BIP View Association BIP Report Template Translations Filter [Name]=' BIP Accounts - Current Query' [Report Name]=' Test Account List' [Name]=' Account List View' [Report Name]=' Test Account List'
NOTE: If the data type of interest is not available, it might be set as Inactive. Make sure the Active field for the data type is checked in the Data Type Details view. This step allows you to query the reports being migrated to the target environment.
a b
Navigate to the Deployment Projects view. In the Deployment Projects list, select the draft deployment. The Status field of the draft deployment project record appears as Draft.
ADM populates the Status field with Enabled and the Publication Date/Time field with the date and time of the report project activation.
a b c d
Navigate to the Application Deployment Manager screen, then the Deployment Sessions view. Select the newly enabled report project, and make sure the Export to File and the Deployment Lock fields are checked. Enter a shared location to store the XML files that contain the database records. Click Deploy.
The database record XML files are exported to the shared location.
14 3
2 3
Click the Deployment Sessions Menu button, and select Deploy from File. In the Deploy from File dialog box, enter the file paths from which to migrate the database records by doing the following:
a b c
Enter the file path for the XML file that contains the Sample Data Generation file, and then click Import. Enter the file path for the XML file that contains the Report Template Registration file, and then click Import. Enter the file path for the XML file that contains the View Association file, and then click Import.
NOTE: Make sure to specify the shared location where the database records are stored. For example, you might enter the following shared locations:
In the target environment, make sure the data was migrated correctly by verifying that the report appears in the Reports menu. For example, in Step 4 on page 142 in the Packaging Report Database Records in the Source Environment you created a report named Test Account List. To verify that report migrated correctly, navigate to the Accounts screen, and then the Account List view. Click Reports to verify the Test Account List report appears in the Reports menu.
Create and export a SIF file for the integration object by doing the following:
a b c d
Log in to Siebel Tools. In the Object Explorer, select Integration Object. In the Integration Object list, right-click the integration object for which you want to create the SIF file, and then click Add to Hot Fix. In the Generate Hot-Fix dialog box, enter a label, and then click Export. A directory containing this SIF file is placed in the Tools\ADM directory.
144
Migrating Reports Process of Migrating New Reports after Creating New Integration Objects
Copy the SIF and descriptor files in the repository folder of the ADM package that was created when you ran the admpkgr init command. For more information about generating the command, see Packaging the Report Files in the Source Environment on page 140.
Perform the steps as described in Packaging the Report Files in the Source Environment on page 140. NOTE: If there is no report for this integration object and there are no plans to move a report for this integration object, you can skip Step 1 on page 140.
Verify that the integration object was moved to the target environment, perform the following:
a b c
Log in to the target environment computer. Navigate to the Administration - BI Publisher Reports screen, then the Sample Data File Generation view. Make sure the integration object appears in the Sample Data File Generation list.
1 2 3
Perform the procedure in Process of Migrating an Integration Object for a Report on page 144. Generate the XML data file for the report as described in Generating Sample XML Data Files for Siebel Reports on page 112. Copy the database record files in the related package folder along with the SIF file, and then migrate them.
14 5
Migrating Reports Process of Migrating New Reports after Creating New Integration Objects
146
11 Parameterized Reports
This chapter describes parameterized reports and how to create them. It is intended only for those who have report developer or administrator privileges. The topics in this chapter include: About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152 Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
Related Topics About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152
14 7
Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
Table 9.
Report Parameter Types Behavior Displays a simple checkbox Boolean parameter. Displays a text box where the user can enter a date value and an associated calendar control which can be invoked using an icon. The date format is based on the user preferences. Displays a picklist where the user selects a value from a list. You can define any application list of values (based on Picklist Generic BC). Dynamic list of values are not possible. An LOV must exist in the list of application list of values. The LOV parameter type supports MLOV translation. The list of values available are restricted based on the business object of the view the report is associated with. Hierarchical LOVs are not possible. NOTE: The picklist name chosen from the UI determines whether it is bounded or not. If the selected picklist is bounded, then the LOV parameter is bounded, but if the selected picklist is not bounded, then the LOV parameter is not bounded. Picklist Values Appear in UI? No No
LOV
Yes
Displays a text box where the user can enter a string value. Displays a text box where the user can enter a numeric value. The number control invokes the standard calculator widget. Displays a text box where the user can enter a date and time value and an associated calendar control which can be invoked using an icon. The calendar control includes time and time zone options. The date format is based on the user preferences.
No No No
148
Table 9.
Report Parameter Types Behavior This parameter type is simple text that you can use as descriptive text for a section separator. There is no control type related to this parameter. The only applicable property for this type is the Display Value and the Order attribute. All parameter display values align from the right, therefore, a very large Label Display value will extend the applet on the left side. NOTE: It is not possible to define font face, size, color, style, or alignment or wrap the Display Value with HTML formatting codes in order to determine the run time appearance of labels. Picklist Values Appear in UI? Yes
TextArea
Displays a text area (with small scrollbar) where the user can enter a large string value.
No
Related Topics About Parameterized Reports on page 147 About Referencing Parameters in the Report Layout Template on page 149 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152 Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
14 9
Render data rows in different colors by defining a user-specified field (such as ACTIVE_STATUS).
TIP: To test that the parameters are passed through correctly, you can display user input directly on the report. In this manner, you can verify Oracle BI Publisher received the correct user input, but there is no impact on the report layout controls. NOTE: You can also use parameters to filter data in a template, but this action is not recommended for performance reasons. It is more efficient to filter records in the user interface using a query than in the report layout template. You must define template parameter definitions at the beginning of an RTF report layout template using the following syntax: <?param@begin: Param1> NOTE: Default values are now defined in the user interface (in previous releases, default values were defined in the report layout template). For more information about defining default values, see Defining Report Parameters in the Siebel Application on page 153.
Related Topics About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152 Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
150
The following bullet points provide information about parameter definitions and how to use them: In the Parameters list in the Templates views, you can:
Define parameters using the New button. NOTE: It is recommended that you do not copy parameters using the Copy Record functionality.
Make a parameter required by setting the Required field to Y. A red asterisk appears next to the parameter at run time. Define the order in which parameters appear at run time by setting values in the Order field. Parameters must have a unique Order value. If the order values are left blank, then the parameters appear in the user interface after any other values.
The parameter choices a user can select at run time is displayed as a single list. Because of this, it is recommended that you do not specify a large number of parameters (limit to no more than 25) because the appearance of the list becomes too large and impedes the ability to select values correctly. For each data type, the appropriate validation occurs at run time to check that a user has entered a correct value. Each parameter value a user enters at run time is passed to the Oracle BI Publisher Server as string values when the report is generated. Therefore, certain data types, such as Date, must address the appropriate functions for the value to be recognized as an official date value. For example, you can use the canonical date functions to convert a string value into a date value. The minimum and maximum validation (date values entered within a set range) and validation or defaults using date functions, such as Today()-7 and conditional value logic (a display of one parameter that depends on another value) are not currently possible. In the Parameter Translations list in the Templates views, you can associate a language translation by setting a Display Value.
NOTE: Although possible, it is recommended that you do not use parameters to filter data in a report layout template. Doing so can negatively impact performance. About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149 About Report Parameter Validation on page 152 Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
15 1
For information about when to perform parameter validation, see Defining Report Parameters in the Siebel Application on page 153.
Related Topics About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149 About Defining Report Parameters in the Siebel Application on page 150 Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
Create parameter definitions (or make sure the definitions exist) in the report layout template. For example, you might have the following definition: <?param@begin: Param1?> For information about parameter definitions in report layout templates, see About Referencing Parameters in the Report Layout Template on page 149.
Related Topics About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149
152
About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152 Defining Report Parameters in the Siebel Application on page 153 Example of Generating a Parameterized Report on page 155
15 3
Scroll down to the Parameters list, click New, and then fill in the applicable fields. The following table describes some of the fields. Field Label Name Order Type Description Descriptive text for the parameter. You can use this field for translations. The name of the parameter. This field references the same in the report layout template. The order in which parameters appear at run time. The type of parameter. Choices are: Checkbox, Date, LOV, Text, Number, DateTime, Label, and TextArea. For a description of each parameter, see About Report Parameter Types and Attributes on page 148. Use this field to provide the default value for the parameter. This default value appears in the Report Parameter dialog box and is passed to the Oracle BI Publisher Server for report generation. This field is used for translations. The name of the picklist from which users choose values in the parameter dialog box. Use this field for LOV parameter types. A value of Y indicates the parameter is required. If required, a value must be entered in the user interface.
Default
NOTE: Each parameter name value you define must have a correlating parameter definition in the report layout template. For example, if you define a parameter named Param1, the definition of Param1 must appear in the report layout template.
If there are translations, add the following information for each language:
Click Validate to check for inconsistencies between the template definitions you defined above and the report layout template. For more information about this feature, see About Report Parameter Validation on page 152.
Related Topics About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152 Process of Creating Parameterized Reports on page 152 Example of Generating a Parameterized Report on page 155
154
From the parameter pop-up applet, select the parameter values for the report, and then click Submit. NOTE: If the report does not have a default output type defined, you must select the output file type, and then click Submit again.
The report is generated by the Oracle BI Publisher Server, and then transferred to the Siebel application screen. For more information about generating reports, see Generating Reports on page 89.
Related Topics About Parameterized Reports on page 147 About Report Parameter Types and Attributes on page 148 About Referencing Parameters in the Report Layout Template on page 149 About Defining Report Parameters in the Siebel Application on page 150 About Report Parameter Validation on page 152 Process of Creating Parameterized Reports on page 152 Defining Report Parameters in the Siebel Application on page 153
15 5
156
NOTE: Oracle Business Intelligence Publisher (Oracle BI Publisher) for Siebel Business Applications logs all exceptions and debug level information.
Setting the Log Level for the XMLP Report Server Component Using the Server Manager UI
Use the following procedure to set the log level for the XMLP Report Server component using the Server Manager UI.
To set the log level for the XMLP Report Server component using the Server Manager UI 1 2
Navigate to the Administration-Server Configuration screen, Servers, and then the Components view. In the Component field, query for XMLP Report Server, and then click the Events view tab.
15 7
Troubleshooting Siebel Reports Enabling Logging for Siebel Reports in the Siebel Application
3 4 5 6 7
In Events list, query for XMLP Report Log, and then set the log level value to 5. Click the Component tab. In the Component field, query for your AOM (Application Object Manager), for example, Call Center Object Manager (ENU), and then click the Events tab. In the Events list, query for XMLP Report Log, and then set the log level value to 5. Stop and restart the XMLP Report Server and AOM server components. For more information about restarting the Siebel Server, see Siebel System Administration Guide.
Setting the Log Level for the XMLP Report Server Component Using Server Manager
Use the following procedure to set the log level for the XMLP Report Server component using Server Manager (srvrmgr).
To set the log level for the XMLP Report Server component using Server Manager 1
Run the following command to connect to the Siebel Server Manager: srvrmgr /g <gateway machine name:port number> /s <xmlp siebel server name> /e <enterprise> /u <user name> /p <password> where: gateway machine name:port number is the name of the physical computer on which the Siebel Gateway Name Server is running and the port number on which the Gateway Name Server is listening. NOTE: The colon and port number are optional if using an optional default port. xmlp siebel server name is the name of the server on which the XMLP Report Server component is enabled. user name is the login name of the administrator. password is the password for the administrator. For example, you might use the following command: srvrmgr /g <gateway machine name>:2330 /s <xmlp siebel server name> /e Siebel /u SADMIN /p MSSQL
Run the following command to change the event log level: change evtloglvl XMLPReportLog=5 for comp xmlpreportserver where 5 is the event log level that you want to change. For example, to get details for a call to a business service, run the following command: change evtloglvl ObjMgrBusServiceLog=5 for comp xmlpreportserver
158
Troubleshooting Siebel Reports About Enabling Logging for the Oracle BI Publisher Server
Shut down the XMLP Report Server component and then restart this component to make sure logging changes take effect.
Place the file in the jre\lib directory used by the Siebel client (for example, C:\Program Files\Java\jre1.6.0_07\lib) and make sure that the directory specified by the LogDir parameter exists. The resulting log files from the report generation will be created at this location.
If an error occurs while generating reports in disconnected mode, an xdo.log file is created and saved to the path specified in the .cfg file. Use this log file for troubleshooting.
15 9
Troubleshooting Siebel Reports Guidelines for Resolving Class Not Found Errors When Previewing Reports in Microsoft Word
Guidelines for Resolving Class Not Found Errors When Previewing Reports in Microsoft Word
This topic provides guidelines for resolving class not found errors when previewing reports in Microsoft Word.
Guidelines for Resolving Class Not Found Errors When Previewing Reports in Microsoft Word
Observe and adhere to the following guidelines when resolving class not found errors: Make sure there are no spaces or new line character after the -Xbootclasspath/a: string. For example, this string might appear as follows: set_JAVA_OPTIONS=-Xbootclasspath/a:C:\81DQSSIA\client\classes To check the syntax, turn off word wrapping in the editor you are using so that set_JAVA_OPTIONS is a single line. You must have three distinct lines in your batch file if word wrapping is turned off. Check the path to Microsoft Word that the batch file references. Search for winword.exe from C:\Program Files to find the path. The %1 in the batch file is an argument to represent a document that is typically opened in Microsoft Word (RTF files). Do not use set _JAVA_OPTIONS as a system environment variable because this prevents you from previewing reports in the Siebel client.
For instructions for resolving, see Resolving Class Not Found Errors When Previewing Reports in Microsoft Word on page 161.
160
Troubleshooting Siebel Reports Resolving Class Not Found Errors When Previewing Reports in Microsoft Word
Resolving Class Not Found Errors When Previewing Reports in Microsoft Word
Errors can occur when previewing reports with Microsoft Word that use preconfigured RTF (Rich Text Format) templates. To resolve these types of errors, you create a custom batch file to launch Microsoft Word and load the required template libraries before opening the RTF template. NOTE: In your batch file, replace the explicit drive and folder locations with those on your own computer based on where you installed the Siebel Web Client. It is not necessary to associate .doc extensions with this batch file.
To resolve class not found errors when previewing reports in Microsoft Word 1 2
Navigate to C:\Program Files. Create a MSWordForBIPub.bat file containing the following code to set the _JAVA_OPTIONS environment variable before launching Microsoft Word. echo %1 set _JAVA_OPTIONS=-Xbootclasspath/a: C:\81DQSSIA\client\classes\SiebelXMLP.jar;C:\81DQSSIA\client\ classes\siebel.jar;C:\81DQSSIA\client\classes\XSLFunctions.jar;C:\81DQSSIA\ client\classes\SiebelCustomXMLP.jar;C:\81DQSSIA\client\classes\SiebelCustomXMLP _SIA.jar "C:\Program Files\microsoft office\Office\Winword.exe" %1 TIP: Create a shortcut to the MSWordForBIPub.bat batch file and move it to your desktop.
If you want to make sure this batch file is always executed when opening a preconfigured report layout template, you associate the RTF files with the .bat file by doing the following:
a b c d
Navigate to the template files in your Siebel client environment. (For example, C:\Siebel\client\XMLP\TEMPLATES) Sort the templates files by Type. Right-click on a RTF file (or select all) and Select Open With to choose an text editor. Click Browse to find the .bat file, and then open it.
16 1
Check the Always use the selected program to open this kind of file checkbox, and then click OK. This associates the selected RTF file or files with the batch file created in Step 2 on page 161. The batch file sets an environment variable needed for publishing Oracle BI Publisher reports from within Microsoft Word.
NOTE: This workaround automatically associates the RTF file with the batch file. Now, when you double-click a RTF file, you see a command prompt window (running the batch file) automatically run at the same time. Alternatively, you can go to the desktop shortcut icon and run the shortcut to the .bat file to test the report preview. Many standard RTF files in the Siebel client Templates directory (C:\siebel\client\XMLP\TEMPLATES) are set to read only. Before previewing reports from this directory, go to Properties for the applicable template and remove the Read-only attribute to avoid run-time errors.
Table 10.
Resolving Siebel Reports Error Messages Description and Solution This error occurs when you fail to upload the template to the Oracle BI Publisher Server. To resolve, see Troubleshooting Errors While Running Siebel Reports (SBL-OMS-00203) on page 167. This error occurs after clicking Submit to generate a report. To resolve, see Troubleshooting Error After Clicking Submit to Generate a Report (SBLSRQ-00103) on page 167. This error occurs when the path settings in the configuration files are incorrect. To resolve, see Troubleshooting Errors That Occur Due to Incorrect Configuration File Settings (SBL-DAT-00322) on page 167. Connection Mode Connected and disconnected
Error Message or Symptom SBL-OMS-00203: Error <?> invoking method "<?>" for Business Service "<?>"
"Unable to find definition for component XMLPReportServer(SBLSRQ-00103)" error when I clicked on the Submit button to generate the report." The specialized method 'GetFileToDir' is not supported on Business Component 'Report Template BC' used by Business Object 'Report Administration'. (SBL-DAT-00322)
162
Table 10.
Resolving Siebel Reports Error Messages Description and Solution This error occurs when users forget to provide a sample XML data file for generating an XLIFF file. To resolve, see Troubleshooting XLIFF File Errors on page 168. Connection Mode Disconnected only
Error Message or Symptom SBL-RPT-50504: Error occurred while saving the record. No data file provided for XLIFF generation.
This error occurs when Oracle BI Publisher or the JAR files are not loaded. To resolve, set the classpath, see Troubleshooting the CLASSPATH Settings Using Siebel Server Manager on page 169.
Disconnected only
Verify that SiebelCustomXMLP.jar, SiebelXMLP.jar are under SIEBSRVR_ROOT\classes. Make sure that the Oracle BI Publisher Server path is: $OC4J_PATH\j2ee\home\applications\ xmlpserver\xmlpserver\WEB-INF\lib For Siebel Industry Applications, make sure the following files are in both paths: SiebelCustomXMLP_SIA.jar SiebelXMLP.jar
Connected only
This error appears in the Oracle BI Publisher log file or console when generating a report when the JAR files have not been copied to the Oracle BI Publisher Server, or the required Disable External Reference parameter attribute has not been set to FALSE. To resolve, see Starting and Stopping OC4J and Oracle BI Publisher on page 49.
Not applicable
Verify the BIP Server Userid and Password. (SBL-RPT-50529) or Failed to log into BI Publisher: invalid username or password.
This error message appears in the XMLP log file, because the user has not provided the correct User ID and password for the Oracle BI Publisher Server in the XMLP Report Server component parameters. To resolve, see Troubleshooting Oracle BI Publisher Server Login Errors on page 169.
Connected only
16 3
Table 10.
Resolving Siebel Reports Error Messages Description and Solution Verify whether the temp\xmlp directory exists in the Siebel Server root directory (SIEBSRVR_ROOT). If it does not, create one. Also make sure the Siebel File System is set appropriately. For information about setting the Siebel File System, see Siebel System Administration Guide. Make sure that the report name does not contain the following special characters: Forward slash (/) Backslash (\) Double quote (") Single quote (') Tilde (~) Ampersand (&) Asterisk (*) Plus sign (+) Left angle bracket (<) Right angle bracket (>) Percent sign (%) Connected only Connection Mode Connected and disconnected
PublicReportService::executeCreate Report Failure: due to Report Name contains special characters for report
Connected only
SBL-EAI-04308: Operation 'runReport' of Web Service 'http:// xmlns.oracle.com/oxp/service/ PublicReportService.PublicReportSer viceService' at port 'PublicReportService' failed with the following explanation: "oracle.apps.xdo.webservice. exception.OperationFailedException: PublicReportService:: generateReport failed: due to oracle.apps.xdo.servlet. CreateException: Report definition not found:/SiebelCRMReports/ <Report Name>/<Report Name>.xdo".
This error occurs when you execute a report that has missing bits on the Oracle BI Publisher Server (such as the .xdo file). To resolve, upload the layout template from Oracle BI Publisher using the Report Template Registration view. For more information about uploading layout templates, see Registering Report Layout Templates on page 114.
164
Table 10.
Resolving Siebel Reports Error Messages Description and Solution The problem occurs when the table header row and the data row are composed of two different tables with no space between them. HTML, and sometimes EXCEL, might generate output with alignment issues. NOTE: There are two tables, one for Table Header and one for Data Row. But they look like one single table, because there is no space between the two tables. To resolve, see Troubleshooting Alignment Problems in HTML Output on page 169. Connection Mode Connected and disconnected
Error Message or Symptom Alignment issues with columns with HTML file output type
The PPT output type for Japanese (JPN) is distorted in generated reports. Create the font mappings for the Oracle BI Publisher Server to make sure that the HTML output appears correctly. To resolve, see Troubleshooting Japanese Font Errors on page 169.
Connected only
16 5
Table 10.
Resolving Siebel Reports Error Messages Description and Solution This error occurs while uploading files to Oracle BI Publisher. To resolve, verify the following: JAVA_HOME variable is set correctly. The following JAR files (Siebel.JAR, SiebelXMLP.JAR, XSLFunctions.JAR, SiebelCustomXMLP.JAR, and SiebelCustomXMLP_SIA.JAR) are copied from the following directory: Connection Mode Not applicable
Error Message or Symptom SBL-EAI-05010: Class name incorrect or does not extend SiebelBusinessService : com/siebel/ data/SiebelPropertySet -- JVM Exception:java.lang.NoClassDefFoun dError: com/siebel/data/ SiebelPropertySetObjMgrBusService Log Object manager error: ([0] Class name incorrect or does not extend SiebelBusinessService : <?>
siebelroot\classes\original
Then make sure they are copied to the following directory: ORACLE_HOME\j2ee\home\ applications\xmlpserver\xmlpserve\ WEB-INF\lib The CLASSPATH variable is set correctly in the JVMSubSys profile. The JVM SubSystem Name parameter for XMLPReportServer is set to XMLPJvmSubsys. NOTE: If this value is JAVA, override it.
SBL-EAI-04308: Operation 'uploadReport' of Web Service 'http:/ /xmlns.oracle.com/oxp/service/v11/ PublicReportService.PublicReportSer viceService' at port 'PublicReportService_v11' failed with the following explanation: "oracle.apps.xdo.webservice.excepti on.InvalidParametersException: PublicReportService::executeUpload Report Failure: Due to Report with Path [/SiebelCRMReports/Application Activity/Application Activity.xdo] already exist!".
This error occurs while uploading files to Oracle BI Publisher. This error indicates that the Oracle BI Publisher Server already has a copy of the file that is currently being uploaded. The uploadReport method does not support uploading a new version of an existing file. To resolve, the administrator must either rename or delete the folder for the existing instance of the report on the Oracle BI Publisher Server. The Oracle BI Publisher Server stores the report layout templates in: ORACLE_HOME\xmlp\XMLP\Reports\ SiebelCRMReports
Not applicable
166
Restart the Siebel Server. For information about restarting the Siebel Server, see Siebel System Administration Guide.
Troubleshooting Errors That Occur Due to Incorrect Configuration File Settings (SBL-DAT-00322)
Use one of the following procedures to correct errors that occur due to incorrect configuration file settings (error message SBL-DAT-00322).
16 7
a b c d e 2 3 4 5 6
Navigate to the Administration - Server Configuration screen, Servers, and then the Components view. Query for the Callcenter Object Manager (or other application specific Object Manager, like Siebel Sales or Siebel Service). Click the Parameters view tab, and then query for FileSystemManager, and then click Advanced. In Siebel File System field, provide the path as \\<machine name>\fs. Make sure that the fs directory exists in the D: drive and also that it is shared.
Restart the Siebel Server. Verify that the File System component is running. Verify that CLASSPATH is set in the JVMSubSys profile parameter. Verify that all the required JAR files are included and available in the CLASSPATH. Verify that the CLASSPATH separator is in the correct format for Windows or UNIX. In UNIX, the CLASSPATH separator is a colon (:). In Windows, the CLASSPATH separator is a semicolon (;).
To check whether the file system path is set properly, try to register the template. If registering the template is successful, you can drill down on the generated XLIFF file. If either browsing the template fails or the drilldown fails, this means that the file system path is not set appropriately.
168
16 9
2 3 4 5 6
Restart OC4J (Oracle Application Server Containers for Java Platform, Enterprise Edition). Launch the Oracle BI Publisher Server URL. Log in to Oracle BI Publisher Server. Navigate to Admin, Runtime configuration, and then Font Mappings. Create the following two font mappings:
170
17 1
172
Index
A
administering reports 69
C
copying JAR files to the Oracle BI Publisher Server 47 custom reports creating new integration objects for 110 creating, process of 106 extending integration objects for Siebel Reports 109 process of creating, diagram of 107
G
generating reports 92 about 89 example of 94 monitoring the status of 94 scenario for 90 workflow for connected mode 28 workflow for generating in disconnected mode 29 generating reports (diagram) 92
D
debugging disabling for Siebel Reports in disconnected mode 160 enabling for Siebel Reports in disconnected mode 159 deleting scheduled reports 129 deploying reports to the Siebel Web Client from a disconnected client 69 description of 104 directory structure for Siebel Reports DATA directory, described 31 FONTS directory, described 31 REPORTS, directory described 31 TEMPLATES directory, described 31 xliff directory, described 31 disabling external file references for the Oracle BI Publisher Server 48 documentation, where to find previous versions of Siebel Reports 38
I
integrating Oracle BI Publisher with Siebel Business Applications guidelines for 37 preparation tasks for 43 process of installing and configuring Oracle BI Publisher 44 roadmap for 40 integration objects for Siebel Reports creating new 110 extending to add new fields to a report 109
J
JAR files for the Oracle BI Publisher Server, adding an explicit reference to 58
L
languages adding to report layout templates 79 deleting from report layout templates 79 logging for Siebel Reports enabling logging for in the Siebel application 157 setting log levels for using the GUI 157 setting log levels for using the Server Manager (srvrmgr) 158 logging for the Oracle BI Publisher Server about enabling 159
E
enabling and configuring report scheduling, process of 61 error messages, troubleshooting for reports 162 Extensible Markup Language See XML Extensible Stylesheet Language See XSL Extensible Stylesheet Language Transformation
17 3
Index M
M
master-detail reports about 131 creating master-detail layout templates in Microsoft Word 136 example of comparing the Service Request Activity (All) report with its corresponding layout template 132 using 131 migrating reports migrating an integration object for a report 144 migrating new reports after creating new integration objects 145 migrating the report files to the target environment 141 moving database records to the target environment 143 packaging and migrating reports, process of 140 packaging database records in the source environment 142 packaging the report files in the source environment 140 requirements for 139 multilingual reports about working with 75 adding and deleting languages from report layout templates 79 designing 77 uploading to the Siebel application, example of 78
Oracle BI Publisher Enterprise, installing 44 Oracle BI Publisher repository about 33 changing the location of for Siebel Reports 73 Oracle BI Publisher Server about 32 adding an explicit reference to JAR files 58 copying JAR files to 47 disabling external file references for 48 Oracle BI Publisher-Siebel application interaction 33 Oracle Business Intelligence Publisher Addin for Microsoft Word about using with Siebel Reports 24 advantages of using 25 Excel Analyzer feature 26 installing 46 menu and toolbar, example of 25 Template Builder feature 26 Template Viewer feature 26 using to create report layout templates 113
P
parameter type Checkbox, described 148 Date, described 148 DateTime, described 148 Label, described 149 LOV, described 148 Number, described 148 Text, described 148 TextArea, described 149 parameter validation, about 152 parameterized reports about 147 about defining parameters in the report template 149 about referencing parameters in the report layout template 149 creating, process of 152 example of generating 155 how they are generated 147 purging reports automatically purging from the Siebel File System 71 from the Oracle BI Publisher Server 72 purging scheduled reports 72
O
OC4J, starting and stopping 49 optimization enabling scalable mode for Siebel Reports 84 increasing EAI HTTP transport sleep time for 87 optimizing performance for large data volumes, process of 84 setting a temporary directory on the Oracle BI Publisher Server for 86 setting concurrency parameters for 82 setting the report execution wait time for 81 setting the server request processor wait time for 82 Oracle BI Publisher starting and stopping 49 Oracle BI Publisher Add-in for Microsoft Word See Oracle Business Intelligence Publisher Add-in for Microsoft Word
R
registering report layout templates, about 104 report execution modes comparison,
174
Index S
diagram of 34 report layout template views 104 report layout templates creating using Oracle BI Publisher Add-in for Microsoft Word 113 defining for selected records 119 diagram for uploading to a Siebel application 102 registering 114 registering and sharing, about 104 sharing 118 workflow for uploading to a Siebel application 102 report parameters about defining in the Siebel application 150 report sequence order, changing in the Reports Menu 120 report templates about multiorganizational templates 104 visibility across organizations, scenario for 105 report translation, about 80 reports about generating 89 about parameterized reports 147 adding multiple integration objects to 117 associating registered reports with application views 120 creating 99 deleting 97 determining the report language at run time 76 determining whether to modify existing or creating custom 105 generating 92 generating an opportunity report, example of 94 generating sample XML data files for 112 generating, diagram of 92 parameter types and attributes, about 148 registering and sharing report layout templates, about 104 registering report layout templates 114 reporting across multiple Siebel business objects 101 scenario for creating custom 99 setting language and locale user preferences 97 troubleshooting 157 uploading report layout templates to a Siebel application, workflow for 102 using master-detail reports 131 viewing previously generated reports 96 Reports Business Service
about 171 configuring 172 Reports menu changing the report sequence order 120 sample diagram of 89 using to generate reports 89
S
scenario creating custom reports 99 scheduled reports about 123 deleting 129 enabling and configuring, process of 61 example of 126 monitoring and viewing 127 procedure for 124 sharing report layout templates, about 104 Siebel application-Oracle BI Publisher interaction 33 Siebel Reports about 21 about integration objects for 100 about using 22 administering 69 architecture, described 27 development environment, described 27 directory structure, described 31 file types, described 32 overview of 21 report execution in connected mode 35 report execution in disconnected mode 35 report output files types 22 upgrading, roadmap for 65 uploading preconfigured reports to the Oracle BI Publisher Server 60 users, described 23 using Oracle Business Intelligence Publisher Add-in for Microsoft Word with 24 workflow for generating reports in connected mode 28 workflow for generating reports in disconnected mode 29
T
testing integration configurations for Siebel Reports 64 troubleshooting reports alignment problems in JPN and PSJ environments 165 class name incorrect errors 163 class not found errors when previewing reports in Microsoft Word 161
17 5
Index U
class not found errors when previewing reports in Microsoft Word, guidelines for 160 column alignment problems in HTML and EXCEL 165 custom Java classes 163 error after clicking Submit to generate a report 162 error due to special character violations 164 error messages for 162 error while uploading files to Oracle BI Publisher 166 errors relating to the Siebel File System or XMLP directory 164 errors while running 162 incorrect path settings in configuration files 162 Oracle BI Publisher run-time errors 163 Oracle BI Publisher Server login errors 163 report definition errors 164 XLIFF errors 163
uploading files to Oracle BI Publisher error SBL-EAI-04308 166 SBL-EAI-05010 166 user preferences, setting language and locale for reports 97 using Siebel Reports, requirements for 38
W
Web service PublicReportService Web service, about 33 workflow generating reports in connected mode 28 generating reports in disconnected mode 29
X
XLIFF (XML Localization Interchange File Format), described 32 XML (Extensible Markup Language), described 32 XPath (XML Path Language), described 32 XSL (Extensible Stylesheet Language), described 32 XSL-FO (Extensible Stylesheet LanguageFormatting Objects), described 32 XSLT (Extensible Stylesheet Language Transformation), described 32
U
upgrading Oracle BI Publisher to version 10.1.3.4.1 from 10.1.3.4.0 66 Siebel Reports, roadmap for 65
176