Professional Documents
Culture Documents
Pneumatic Conveying
The pneumatic conveying process, enclosed and dustfree, ensures material transfer complies with stringent COSHH and other international regulations for industry and is less harmful to the environment than traditional mechanical methods.
Standard Fabrication
DensPhase vessel assemblies supplied complete with Dome Valve, electro-pneumatic controls and air supply piping, strainer, pressure regulation and control equipment pre-piped and pre-wired ready for connection to isolated air and electric supplies. Vessels can be manufactured to most international pressure vessel codes and for a working pressure of 7 barg standard. Specific details are available on request. Vessels are free standing, special foundations are not required. Optional isolating valve and adapter are shown for reference only. Final working dimensions to be confirmed by certified drawings.
Clyde PD Pump
The DensPhase system is a simple, effective and highly reliable method of conveying material from a single collection point to either single or multiple reception hoppers. The DensPhase PD Pump is a batch transfer vessel, similar in concept to the standard DensPhase Pump, with additional capabilities. Developed for maximum economy, the system utilises small bore pipelines operating at low conveying pressures, with reduced air flow and power consumption. Highly efficient conveying allows rates of up to 75 t/hr over conveying distances of 500 metres or more, making this system particularly suitable for transfer of dry, fluidisable materials.
S PN10
Material inlet
Vent
BS
B1 0<200C / B2 200<350C
A1 0<200C / A2 200<350C
Pneumatic panel IP 66
45
04
ve nt
PN 10
Material outlet
G1 G2
V 1 1 2 2 3 20 30 30 40 24 24 20 20 25
J M
50mm to 150mm standard BS4504 PN10 above 150mm CPC alignment BS4504 PN10
Note: 1 Water cooling connections for Dome valves above 200C not shown. 2 Models 50, 70 and 100 vessel shells have 4 no. support legs. 3 Model 3/4/2 has a pinch type vent valve. 4 Design pressure : 7 Bar Maximum conveying pressure 4.5 Bar 5 OBCR : Outlet Bend Cleaning Ring
Dimensions - (mm) : Apply to PHO - 100C maximum & PHV - 200C maximum Model 3/4/2 8/8/3 12/8/4 20/12/5 30/12/6 37/12/7 50/12/8 70/12/10 A1 1018 1590 1843 2156 2480 2696 2986 3052 A2 1038 1610 1863 2168 2492 2708 2998 3064 3285 B1 1238 1835 2088 2426 2750 2966 3256 3322 3543 B2 1258 1855 2108 2438 2762 2978 3268 3334 3555 C 486 826 826 1126 1126 1126 1126 1126 1126 D 303 465 467 670 577 289 602 690 849 E 1071 1582 1837 2062 2444 2687 2977 3069 3294 F BSP 50 50 80 80 80 80 100 100
no OBCR
no OBCR
1306 100PN10 1390 100 PN10 1466 100 PN10 1851 100 PN10
100/12/12 3273
Clyde Materials Handling Limited Carolina Court, Lakeside Doncaster DN4 5RA UK Tel: +44 (0) 1302 321 313 Fax: +44 (0) 1302 554 400 solutions@clydematerials.co.uk
www.clydematerials.com