Professional Documents
Culture Documents
In-Line Circulators
Taco In-Line Circulators are designed to efficiently circulate heated or chilled water in residential or light commercial Hydronic Systems. These circulators may also be used for zoning large installations and are available in bronze construction for domestic hot water applications. In-Line Circulators demonstrate proven performance, dependablity, quiet operation and long lasting performance.
AA BB
D
110, 111, 112, 113 & 120
3 FLOW M /H
8
3
10
12
14
20
4 6 3 2 1 0
15 113
5 4 3 2 1
10 5 110
FLOW GPM
111
120
(2)
FLANGE SIZE 4", 1", 114", 112" 4", 1", 114", 112" 4", 1", 114", 112" 4", 1", 114", 112" 2"
A IN.
30
DIMENSIONS 40 50 B IN.
60
MM IN.
70
MM
0 APPROX.
125 psi 125 psi 125 psi 125 psi 125 psi
1458 371.5 1258 320.7 778 200.0 6516 160.3 1614 412.8 1378 352.4 1014 260.4 834 222.3 1612 419.1 1412 368.3 778 200.0 638 161.9 1614 412.8 14 355.6 1018 257.2 812 215.9 11 279.4 1678 428.6 1414 362.0 1312 342.9
8 3 8 6
(1) When specifying all bronze construction, add letter B after model number (i.e. 110B). (2) Motors are available with other electrical characteristics consult your Taco representative. (3) 240 Intermittent; 200 Continuous.
Accessories & Options Available in all bronze construction Companion Freedom flanges available in: 34, 1, 1-14, 1-12 sizes Freedom Shut-off flanges available in: 34, 1, 1-14 and 1-1/2 sizes Allow easy isolation and service
FLOW M /H 2 4 6 8 10 12 14
25
20
15 113
5 7
Alloy steel shaft Cupro-Nickel shaft sleeve Mechanical Seal Two piece carbon/ceramic seal is standard Sealide-C/viton available for high temperature and aggressive water applications Body & Flanges Available in cast iron or bronze In-Line configuration Companion flanges provided in 2-12 or 3 Impeller Dynamically and hydraulically balanced Enclosed type cast iron or bronze Drive Coupling Rugged flexible rubber construction absorbs angular and parallel misalignment
Rugged Motor Available in single and three phase, and all standard voltages . . . open-drip proof enclosure Equipped with sleeve bearings for quiet operation Resilient mounted Built-in overload protector on single phase models Factory Tested Every pump is built to Hydraulic Institute standards and operated before shipment Easy Low-Cost Service No special tools required One cartridge bearing assembly fits all models replace cartridge only . . . not bracket One mechanical seal fits all models
A B
10
121-138
20
40
60
FLOW G P M
MOTOR 60C/AC
1 1 1
(2)
DIMENSIONS A RPM 1725 1725 1725 1725 1725 1725 IN. MM IN. B MM IN. C MM IN. D MM
SHIPPING WEIGHT LBS. 72 72 95 108 113 118 KG 32.7 32.7 43.1 49.0 51.3 53.5
1 PH
1818 460.4 1578 403.2 1414 362.0 1118 282.6 1818 460.4 1578 403.2 1358 346.1 1118 282.6 1914 489.0 1534 400.1 2112 546.1 18 457.2 16 16 16 16 406.4 1358 346.1 406.4 1358 346.1 406.4 1358 346.1 406.4 1358 346.1
2 HP, 115/230 V or 230/460/60/3 or 200/60/3 3 4 HP, 115/230 V or 230/460/60/3 or 200/60/3 1 HP, 115/230 V or 230/460/60/3 or 200/60/3
(1) When specifying all bronze construction, add letter B after model number (i.e. 132B). When specifying bronze fitted construction, add letter C after model number (i.e. 132C) (2) Motors are available with other electrical characteristics consult your Taco representative.
300
Taco Inc., 1160 Cranston Street. Cranston, RI 02920 / (401) 942-8000 / Fax (401) 942-2360 Taco (Canada) Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) 564-9422 / Fax (905) 564-9436 www.taco-hvac.com