You are on page 1of 5

Industrial Pumps Centrifugal Monoblock Pumps BP series

Description Specification Features MOC

C.R.I. Centrifugal monoblock pumps volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift characteristics. Most modern and highly sophisticated machinery and technology are engaged in manufacturing these pumps, using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pumps are powered by a totally enclosed fan cooled A.C. Induction two pole motor or four pole motor, suitable for uninterrupted duty. Motor stator is made with low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in single-phase motors. These pumpsets require an adequate motor protection control panel. Power Frequency/Speed Versions Maximum flow rate Maximum total head Degree of insulation Class of insulation Direction of rotation Type of duty Maximum suction lift in meter Maximum liquid temperature Maximum ambient temperature Nominal pump size in mm (Suction x delivery) 2.2kW 15kW (3.0HP 20HP) 50Hz / 2880 rpm Three Phase, 380-415V, 50Hz, A.C Supply 33.3lps (120m3/h) 75 metres (7.5 bar) IP 54 F Clockwise viewed from driving end S1 (Continuous) 8 33o C 40o C 50 x 40, 65 x 50, 80 x 65, 100 x 80, 100 x 100 mm

Dynamically balanced rotating pumps Designed for extensive voltage fluctuations Back pull out deign for easy maintenance Usage of Mechanical seal ensures leak proof operation Pumps available with Bronze & CI Impeller Material Cast Iron Cast Iron Cast Iron / Bronze S.S 410 Mechanical Seal (Carbon & Ceramic)

Part Name Pump Casing Motor Frame Impeller Shaft Sealing

Industrial Pumps Centrifugal Monoblock Pumps - CTS series

Description Specification MOC

C.R.I. Centrifugal monoblock pumps volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift characteristics. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pumps are powered by a totally enclosed fan cooled A.C. Induction two pole motor or four pole motor, suitable for continuous duty . Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in single-phase motors. These pumpsets required an adequate motor protection control panel. Power Range Speed Degree of Protection Class of insulation Versions Direction of Rotation Type Nominal Suction and Delivery Sizes Maximum Head Maximum Suction Lift Maximum liquid Temperature Maximum Ambient Temperature Maximum Working Pressure Pump Casing Motor Frame S.S 304 Aluminum 3.5 bar 0.75 kW, 1.5 kW & 1.85 kW 2900 rpm IP 54. B Single Phase 220V / Three Phase 380V415V, 50Hz, AC Clock wise viewed from driving end. S1 32 mm x 25 mm, 40 mm x 25 mm & 40 mm x 32 mm 35.5 m 8m +5o C - +60o C 40o C

Impeller Shaft Sealing

S.S 304 S.S 304 Mechanical Seal (Carbon & Ceramic)

Industrial Pumps Centrifugal Jet Self-priming Pumps JTS series

Description Specification MOC

C.R.I. Centrifugal Jet Self - Priming pumps volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellows mechanical seal made of carbon & ceramic is fitted over the shaft, which is ground to close tolerance. These pumps are powered by a totally enclosed fan cooled A.C. Induction two pole motor, suitable for continuous duty. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations and increase the life of the bearings and seal. The windings are of high - grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in all singlephase motors. All single-phase pumps require an adequate starter / motor protection control panel. Power Range Speed Degree of Protection Class of insulation 0.55 kW & 0.75 kW 2900 rpm IP 54 B

Versions

Single Phase 220V / Three Phase 380V-415V, 50Hz, AC

Direction of Rotation Type of Duty Nominal Suction and Delivery Sizes Maximum head Maximum Suction lift Maximum liquid Temperature Maximum Ambient Temperature Maximum Working Pressure Pump Casing Motor Frame Impeller Shaft Sealing

Clock wise viewed from driving end S1 25mm x 25 mm 45 m 8m +5o C - +60o C 40o C 4.5 bar S.S 304 Aluminum S.S 304 & Optional Noryl S.S 304 Mechanical Seal (Carbon & Ceramic)

You might also like