Professional Documents
Culture Documents
CANISTER FUSES
For new orders, integral air insulated, canister style current limiting fusing is available for systems through 23kV. Canister style fused switches feature compact, dead-front construction with mechanical or key interlocking arrangements preventing access to the fuses unless the switch is in the open position. Safe, quick fuse replacement is accomplished using conventional tools and without exposing switch dielectric or current carrying parts to environmental contamination. Two fuses can be connected in parallel to double the capacity rating of the switch. The general purpose fuses are ANSI C37.473.C rated and can interrupt both high and low level fault currents while limiting the available fault current on the system.
LOAD SIDE INTERFACE 200A or 600A (8.3kV unit only) Bushing Well IEEE Std. 386-1995
Elbow mounted fuses attach directly to the 600 A bushing interface on the switch.
brackets. Stainless steel mounting brackets with and without parking stands are available. An interlock provision is also available which includes a padlockable hinged stainless steel cover providing a mechanical interlock to prevent access to fuses unless the operating handle is in the open position. Contact your local G&W sales representative for more information.
Voltage class measured line-to-line. * Fuses rated above 25 Amps are required to be nongassing fuses.
Page 30 Page 30
Page 30
FA U LT I N T E R R U P T I N G S W I T C H E S
FUSED ROTARY PUFFER STYLE, TWO POSITION
Circular Tank Design
G&Ws circular tank RP switch incorporates all bushings and operating apparatus on the top of the switch for easy access from above ground if required. Switches are rated through 25kV, 200A. Two way and three way configurations are available for either single, two or three phase applications. Two way and three way configurations are available for either single, two or three phase applications. Single and parallel fuse holders are available.
Interlock Arm (1 per Operating Handle)
One-line Diagram
Approx.
Wt. w/SF6
lbs (kg)
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
8FRPR1W 8FRPR2W 8FRPR3W 15FRPR1W 15FRPR2W 15FRPR3W 23FRPR1W 23FRPR2W 23FRPR3W 8FRPRL1W 8FRPRL2W 8FRPRL3W 15FRPRL1W 15FRPRL2W 15FRPRL3W 23FRPRL1W 23FRPRL2W 23FRPRL3W
29 (737) 29 (737) 29 (737) 29 (737) 29 (737) 29 (737) 29 (737) 29 (737) 29 (737) 35 (889) 35 (889) 35 (889) 35 (889) 35 (889) 35 (889) 35 (889) 35 (889) 35 (889)
31 (787) 31 (787) 31 (787) 31 (787) 31 (787) 31 (787) 33 (838) 33 (838) 33 (838) 31 (787) 31 (787)
160 (73) 170 (77) 180 (82) 160 (73) 170 (77) 180 (82) 160 (73) 170 (77) 180 (82) 200 (91) 210 (95)
15
2 3 1
23
2 3
1 2 3 1 2 3 1 2 3
31 (787) 220 (100) 31 (787) 31 (787) 33 (838) 33 (838) 200 (91) 210 (95) 200 (91) 210 (95)
1 3
15
23
1 2 3 1
2 4 6 2 4 6 2 4 6
31 (787) 31 (787)
15
2 3 1 2 3
23
B
* Suffix W denotes 200A deepwell bushings. Replace W with D for 200A deadbreak bushings or deepwell bushings with deadbreak inserts, Q for 600A QuikChange bushings or A for 600A apparatus bushings.
For standard components and options, see typical specifications pages 21 and 30. For cable entrances, see pages 41-42.
Mechanical interlock prevents fuse access if the switch is in the closed position.
Page 31
Page 31 Page 31
FA U LT I N T E R R U P T I N G S W I T C H E S
FUSED LINEAR PUFFER AND ROTARY BLADE STYLE, TWO POSITION
Rectangular Tank Design G&Ws rectangular tank linear puffer (PI) and Rotary Blade (SF) switches are available in two-way through six-way configurations. Bushings and operating apparatus can be front, top, bottom or side mounted. Wall mounting channels and various frame options are available.
One-line Diagram
Voltage Switch Class Style
Catalog Number*
(kV)
PI PI
40 40 80 80 40 80 80
26.2 (667) 49 (1236) 52 (1321) 61.5 (1562) 69.5 (1765) 72.5 (1842) 80.5 (2045)
600 (273) 850 (386) 725 (330) 970 (440) 1550 (704) 1600 (727) 1750 (795)
15
1 2 3
PI 15 PI SF 15
SF PI
15
1 2 3
15
1 2 3 4
PI
2FFRAM44-376M-40PI
80
89.5 (2273)
1900 (862)
15
1 2 3 4
SF 2FFGRAM44-376M-40SF
80
105 (2667)
2000 (907)
15
1 2 3 4 5
PI
FFRAM55-376M-40PI
80
72.2 (1835)
1550 (702)
SF
FFRAD31-376-40SF
80
51 (1295)
1000 (454)
For standard components and options, see typical specifications pages 22 and 30. For cable entrances, see pages 4142.
* Catalog number suffix: PI = Linear Puffer, SF = Rotary Blade For PI switches, optional 6-1/2" phase spacing (SRA style) is available and will increase tank depth by three inches. ** For PI switches: tank depth = 26" (584mm), tank height = 28" (711mm). Dimensions are approximate and do not include entrances, gauges, frames, operators or mounting channels. ** For SF switches: tank depth = 26" (660mm), tank height = 28" (711mm). Dimensions are approximate and do not include entrances, gauges, frames, operators or mounting channels.
HEIGHT
Page 32 Page 32