You are on page 1of 13

ASTM Standards

1.Ferrous Metals

-A6 Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Pilling.

-A20 Specification for General Requirements for Steel Plates for Pressure Vessels.

-A36 Specification for Carbon Structural Steel.

-A47 Standard specification for Ferritic Malleable Iron casting.

-A48 Standard specification for Gray iron castings E1-1998.

-A53 Specification for Pipe, Steel, Black and Hot-Dipped, Zink-Coated Welded and Seamless.

-A105 Specification for Carbon steels forging for piping applications.

-A106 Specification for seamless carbon steel pipe for high-temperature service.

-A126 Standard specification for Gray iron castings for valves, flanges and pipe fittings.

-A134 Standard specification for Pipe, steel, electric-fusion (Arc).

-A135 Standard specification for Electric-resistance-welded steel pipe.

-A139 Standard specification for Electric-Fusion (Arc) –welded steel pipe (NPS 4 and over).

-A161 Specification for seamless low-carbon and carbon-molybdenum steel still tubes for refinery service.

-A167 Specification for stainless and heat-resisting chromium-nickel steel plate sheets and strip.

-A176 Specification for stainless and heat-resisting chromium steel plate sheets and strip.

-A178 Specification for electric-resistance-welded carbon steel and carbon-manganese steel boiler tubes.

-A179 Specification for seamless cold-drawn low-carbon steel heat exchanger and condenser tubes.

-A181 Specification for carbon steel forging for general purposes piping.

-A182 Specification for forged or rolled alloy-steel pipe flanges, forged fittings, and valves and parts for high-
temperature.

-A192Specification for seamless carbon steel boiler tubes for high-temperature service.

-A193 Specification for alloy-steel and stainless steel bolting materials for high pressure service.

-A194 Specification for carbon and alloy steel nuts for bolts for high pressure and high temperature service.

-A197Standard specification for Cupola malleable iron.

-A200 Specification for seamless intermediate alloy steel chromium manganese silicon.

-A202 Specification for pressure vessel plates, alloy steels chromium manganese silicon.

-A203 Specification for pressure vessel plates, alloy steel, nickels.

-A204 Specification for pressure vessel plates, alloy steels molybdenum.

-A209 Specification for seamless carbon-molybdenum alloys steel boiler and superheated tubes.

-A210 Specification for seamless medium-carbon steel boiler and superheated tubes.
-A213 Specification for seamless ferritic an autenitic alloy-steel boiler, superheater, and heat exchanger tubes.

-A214 Specification for electric resistance welded carbon steel heat exchanger and condenser tubes.

-A216 Specification for steel castings, carbon, suitable for fusion welding, for high temperature service.

-A217 Specification for steel castings, martensitic stainless and alloy for pressure containing parts suitable for high
temperature service.

-A220 Specification for pearlitic malleable iron.

-A225 Specification for pressure vessel plates, alloy steel, manganese vanadium nickels.

-A226 Specification for electric resistance welded carbon steel boiler and superheater tubes for high-pressure
service.

-A229 Specification for steel wire, oil tempered for mechanical springs.

-A234 Specification for piping fittings of wrought carbon steel and alloy steel for moderate and elevated temperatures.

-A240 Specification for heat resisting chromium and chromium nickel stainless steel plate, sheet, and strip for
pressure vessels.

-A249 Specification for welded austenitic steel boiler superheater, heat exchanger, and condenser tubes.

-A250 Specification for electric resistance welded ferritic alloy steel boiler and superheater tubes.

-A252 Specification for seamless steel pipe piles.

-A262 Practice and detecting susceptibility to intergranular attack in autenitic stainless steels.

-A263 Specification for corrosion resists chromium steel-clad plates sheet and strip.

-A264 Specification for stainless chromium nickel steel clad plate sheet and strip.

-A265 Specification for nickel and nickel base alloy clad steel plate.

-A266 Specification for carbon steels forging for pressure vessel components.

-A268 Specification for seamless and welded ferritic and martensitic stainless steel tubing for general service.

-A269 Specification for seamless and welded austenitic stainless steel tubing for general service.

-A271 Specification for seamless austenitic chromium nickel steel tubes for refinery service.

-A276 Specification for stainless steel bars and shapes.

-A278Standard specification for Gray iron castings for pressure containing pipe for temperature up to 650F.

-A283 Specification for low and intermediate tensile strength carbon steel plates.

-A285 Specification for pressure vessel plates, carbon steel, lows and intermediates tensile strength

-A297 Specification for steel castings, iron chromium and iron chromium nickel, heat resistant for general application.

-A299 Specification for pressure vessel plates, carbon steel, manganese-silicon.

-A302 Specification for pressure vessel plates, alloy steel, manganese – molybdenum and manganese molybdenum
nickel.

-A307 Standard specification for Carbon steel bolts and studs, 60000-psi tensile strength.

-A312 Specification for seamless and welded austenitic stainless steel pipes.
-A320 Specification for alloy steel bars, carbon, quenched and tempered.

-A325 Standard specification for Structural bolts, steel, heat-treated, 120/105 ksi minimum tensile strength.

-A333 Specification for seamless and welded steel pipe for low-temperature service.

-A334 Specification for seamless and welded carbon and alloy steel for low temperature service.

-A335 Specification for seamless ferritic alloy steel pipe for high temperature service.

-A336Specification for alloys steel forging for pressure and high temperature parts.

-A350Specification for carbon and low alloy steel forging.

-A351Specification for castings, austenitic, austenitic ferritic for pressure containing parts.

-A352Specification for steel casting, ferritic and martensitic for pressure containing parts, suitable for low temperature
service.

-A353Specification for pressure vessel plates, alloy steel 9% nickel, double normalized and tempered.

-A354

Specification for quenched and tempered alloy steel bolts, studs and other externally threaded fasteners.

-A358

Specification for electric fusion welded austenitic chromium nickel alloy steel pipe for high temperature service.

-A369

Specification for carbon and ferritic alloy steel forged and bored pipe for high temperature service.

-A370

Test method and definition for mechanical testing of steel products.

-A372

Specification for carbon and alloy steel forging for thin walled pressure vessels.

-A376

Standard specification for seamless austenitic steel pipe for high temperature central station service.

-A381

Standard specification for metal arc welded steel pipe for use with high-pressure transmission system.

-A387

Specification for pressure vessel plates, alloy steel chromium molybdenum.

-A388

Practice for ultrasonic examination of heavy steel forging.

-A395

Standard specification for ferritic ductile iron pressure retaining castings for use at elevated temperature.
-A403

Standard specification for wrought austenitic stainless steel piping fittings.

-A409

Standard specification for Welded large diameter austenitic steel pipe for corrosive or high temperature service.

-A420

Specification for piping fittings of wrought carbon steel and alloy steel for low temperature service.

-A426

Standard specification for Centrifugal cast ferritic alloy steel pipe for high temperature service.

-A435

Specification for straight beam ultrasonic examination of steel plates.

-A437

Standard specification for Alloy steel turbine type bolting material specially heat-treated for high temperature service.

-A450

Specification for general requirements for carbon, ferritic alloy, and austenitic alloy steel tubes.

-A451

Specification for centrifugal cast austenitic steel pipe for high temperature service.

-A452

Specification for centrifugal cast austenitic steel cold-wrought pipe for high temperature service. (Not available)

-A453

Specification for bolting materials, high temperatures 50 to 120 ksi yield strength, with expansion, with exanpsion
coefficients comparable to austenitic steels.

-A479

Standard specification for Stainless and heat resisting steel bars and shapes for use in boilers and other pressure
vessels.

-A487

Standard specification for Steel castings suitable for pressure service.

-A494

Standard specification for Castings nickels and nickel alloy.

-A508

Standard specification for Quenched and tempered vacuum-treated carbon and alloy steel forging for pressure
vessels.

-A515

Specification for pressure vessel plates, carbon steel, for intermediate and higher temperature services.
-A516

Specification for pressure vessel plates, carbon steel, for moderate and lower temperature services.

-A517

Specification for pressure vessel plates, alloy steels, high strength, quenched and tempered.

-A524

Standard specification for seamless carbon steel pipe for atmospheric and lower temperatures.

-A530

Specification for general requirements for specialized carbon and alloy steel pipe.

-A537

Standard specification for Pressure vessel plates, heat-treated, carbon manganese silicon steel.

-A540

Specification for alloy steel bolting materials for special applications.

-A541

Specification for quenched and tempered carbon and alloy steel forging for pressure vessel components.

-A542

Specification for pressure vessel plates; alloy steel quenched and tempered chromium-molybdenum and chromium
molybdenum vanadium.

-A553

Standard specification for Structural carbon steel plates of improved toughness.

-A563

Standard specification for Carbon and alloy steel nuts.

-A570

Standard specification for Steel, sheet and strip, carbon, hot rolled structural quality.

-A571

Standard specification for austenitic ductile iron castings for pressure containing parts suitable for low temperature
service.

-A577

Specification for ultrasonic angle-beam examination of steel plates.

-A578

Specification for straight beam ultrasonic examination of plain and clad steel plates for special applications.
-A587

Standard specification for electric resistance welded low carbon steel pipe for the chemical industry.

-A645

Standard specification for Pressure vessel plates, five percent nickel alloy steel, specially heat-treated.

-A671

Standard specification for Electric fusion welded steel pipe for atmospheric and lower temperatures.

-A672

Standard specification for Electric fusion welded steel pipe for high-pressure service at moderate temperatures.

-A675

Standard specification for Steel bars, carbon, hot wrought, special quality, and mechanical properties.

-A688

Specification for welded austenitic stainless steel feed water heater tubes.

-A691

Specification for carbon and alloy steel pipe, electric fusion welded for high-pressure service at high temperature.

-A694

Specification for carbon and alloy steel forgings for pipe flanges, fittings, valves and parts for high-pressure
transmission service.

-A723

Standard specification for Alloy steel forging for high strength pressure component application.

-A789

Standard specification for Seamless and welded Ferritic/Austenitic stainless steel tubing or general service.

-A790

Standard specification for Seamless and welded Ferritic/Austenitic stainless steel pipe.

-A815

Standard specification for Wrought Ferritic and Ferritic/Austenitic stainless steel piping fittings.

2.Nonferrous Metals

-B21

Standard specification for naval brass rod, bar, and shapes.

-B26

Standard specification for Aluminum alloy sand castings.

-B36
Specification for brass plate, sheet, strip, and rolled bar.

-B42

Standard specification for seamless copper pipe, standard sizes.

-B43

Standard specification for seamless red brass pipe, a standard size.

-B61

Standard specification for Steam or valve bronze castings.

-B62

Standard specification for Compositions bronze or ounce metal castings.

-B68

Standard specification for seamless copper tube, bright annealed.

-B75

Standard specification for seamless copper tube.

-B88

Standard specification for seamless copper water tube.

-B96

Standard specification for Copper silicon alloy plate, sheet, strip, and rolled bar for general purposes and pressure
vessels.

-B98

Standard specification for Copper silicon alloy rod, bar, and shapes.

-B111

Specification for copper and copper alloy seamless condenser tubes and ferrule stock.

-B122

Specification for copper-nickel-tin alloy, copper-nickel-zinc alloy (nickel silver) and copper-nickel alloy plate, sheet,
strip, and rolled bar.

-B127

Specification for nickel-copper alloy plate, sheets and strip.

-B148

Standard specification for Aluminum bronze sand casting.

-B150

Standard specification for Aluminum bronze rod, bar, and shapes.

-B152
Standard specification for Copper sheet, strip, plate, and rolled bar.

-B160

Standard specification for Nickel rod and bar.

-B161

Standard specification for Nickel seamless pipe and tube.

-B162

Standard specification for Nickel plate, sheets, and strip.

-B163

Specification for seamless nickel and nickel alloy condenser and heat exchanger tubes.

-B164

Standard specification for Nickel copper alloy rod, bar, and wire.

-B165

Standard specification for Nickel copper alloy seamless pipe and tube.

-B166

Standard specification for Nickel chromium iron alloys and nickel chromium cobalt molybdenum alloy rod, bar, and
wire.

-B167

Standard specification for Nickel chromium iron alloy seamless pipe and tube.

-B168

Standard specification for Nickel chromium iron alloys and nickel chromium cobalt molybdenum alloy plate, sheet,
and strip.

-B169

Standard specification for Aluminum bronze sheet, strip, and rolled bar.

-B171

Specification for copper-alloy plate and sheet for pressure vessel condensers, and heat exchangers.

-B187

Standard specification for Copper bar, bus bar, rod and shapes.

-B209

Standard specification for Aluminum and aluminum alloy sheet and plate.

-B210

Standard specification for Aluminum and aluminum alloy drawn seamless tubes.

-B211

Standard specification for Aluminum and aluminum alloy bar, rod and wire.
-B221

Standard specification for Aluminum alloy extruded bars, rods, wire, shapes, and tubes.

-B241

Standard specification for Aluminum and aluminum alloy seamless extruded tube.

-B247

Standard specification for Aluminum and aluminum alloy die forging, hand forging and rolled ring forging.

-B265

Standard specification for Titanium and titanium alloy strip, sheet, and plate.

-B280

Standard specification for seamless copper tube for air conditioning and refrigeration field service.

-B283

Standard specification for copper and copper alloy die forging (hot passed)

-B333

Standard specification for Nickel molybdenum alloy plate, sheet, and strip.

-B335

Standard specification for Nickel molybdenum alloy rod.

-B337

Standard specification for Seamless and welded titanium and titanium alloy pipe. (Not available)

-B338

Standard specification for Seamless and welded titanium and titanium alloy tube for condensers and heat
exchangers.

-B345

Standard specification for Aluminum and aluminum alloy seamless pipe and seamless extruded tube for gas and oil
transmissions and distribution pipe system.

-B361

Standard specification for factory made wrought aluminum and aluminum alloy welding fittings.

-B363

Standard specification for Seamless and welded unalloyed titanium and titanium alloy welding fittings.

-B366

Specification for factory-made wrought nickel and nickel alloy fittings.

-B381

Standard specification for Titanium and titanium alloy forging.


-B407

Standard specification for Nickel iron chromium alloy seamless pipe and tube. (Not available)

-B409

Standard specification for Nickel iron chromium alloy plate, sheet, and strip.

-B423

Specification for nickel-iron-chromium-molybdenum-copper alloys seamless pipe and tube.

-B425

Specification for Ni-Fe-Cr-Mo-Cu alloy plate, sheet, and strip.

-B435

Standard specification for UNSN06002, N06230 and R30556 plate, sheet, and strip.

-B443

Standard specification for Nickel chromium molybdenum columbium alloy plate, sheet, and strips.

-B444

Standard specification for Nickel chromium molybdenum columbium alloys pipe and tube.

-B446

Standard specification for Nickel chromium molybdenum columbium alloy rod and bar.

-B462

Standard specification for Forged or rolled nickel alloy and austenitic stainless steel pipe flanges, forged fittings, and
valves and parts for corrosive high temperature service.

-B463

Standard specification for UNS N08020, UNS N08026, UNS N08024 alloy plate, sheet, and strip.

-B464

Standard specification for Welded UNS N08020, UNS N08026, and UNS N08024 alloy pipe.

-B466

Standard specification for seamless copper nickel pipe and tube.

-B467

Standard specification for Welded copper nickel pipe.

-B491

Standard specification for Aluminum and aluminum alloy extruded round tubes for general-purpose applications.

-B493

Standard specification for Zirconium and zirconium alloy.


-B494

Specification for primary zirconium alloy ingots.

-B514

Standard specification for Welded nickel iron chromium alloy pipe.

-B517

Standard specification for Welded nickel chromium iron alloy UNS N06025, UNS N06045.

-B523

Standard specification for Seamless and welded zirconium and zirconium alloy steel.

-B550

Standard specification for Zirconium and zirconium alloy bar and wire.

-B551

Specification for Zirconium and zirconium alloy strip, sheet, and plate.

-B564

Specification for nickel alloys forging.

-B574

Specification for low carbon nickel-molybdenum-chromium low carbon nickel-chromium-molybdenum-tungsten alloy


rod.

-B575

Standard specification for Low carbon nickel- molybdenum-chromium and low carbon nickel-chromium-molybdenum
alloy plate, sheet, and strip.

-B581

Standard specification for Nickel-Chromium-iron-molybdenum-copper alloy rod.

-B582

Standard specification for Nickel-chromium-iron-molybdenum-copper alloy plate, sheet, and strip.

-B584

Standard specification for Copper alloy sand castings for general applications.

-B619

Standard specification for Welded nickel and nickel-cobalt alloy pipe.

-B620

Standard specification for Nickel-iron-chromium-molybdenum alloy plate, Shetland strips.

-B621
Standard specification for Nickel-iron-chromium-molybdenum alloy rod.

-B622

Standard specification for Seamless Nickel and nickel-cobalt alloy pipe and tube.

-B625

Standard specification for Nickel alloy and austenitic stainless steel plate, sheet, and strip.

-B649

Standard specification for Nickel alloy and austenitic stainless steel bar and wire.

-B658

Standard specification for seamless and welded zirconium and zirconium alloy pipe.

-B675

Standard specification for UNS N08366 and UNS N08367 welded pipe.

-B688

Standard specification for Chromium-nickel-molybdenum-iron plate, sheet, and strip.

-B690

Standard specification for Iron-nickel-chromium-molybdenum alloys seamless pipe and tube.

-B705

Standard specification for Nickel alloy welded pipe.

-B725

Standard specification for Welded nickel and nickel copper alloy pipe.

-B729

Standard specification for Seamless UNS N08020, UNS N08024, UNS N08026 nickel alloy pipe and tube.

-B804

Standard specification for UNS N08367 and UNS N08926 welded pipe.

3. Ferrous Metals

-E112

Standard Test Methods for Determining Average Grain Size E1-2000

-E114

Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the

Contact Method

-E125

Standard Reference Photographs for Magnetic Particle Indications on Ferrous

Castings R (1997)
-E142

Standard Method for Controlling Quality of Radiographic Testing

-E186

Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in.)

(51 to114mm)) Steel Castings

-E213

Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing

-E272

Standard Reference Radiographs for High-Strength Copper-Base and

Nickel-Copper Alloy Castings

-E280

Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in.

(114 to 305-mm)) Steel Castings

-E709

Standard Guide for Magnetic Particle Examination

Done By: S. Murugan

You might also like