Professional Documents
Culture Documents
414-14B
ASSEMBLY, OPERATION
AND PARTS MANUAL
ROTO-MIX
P.O. BOX 1724
3305 E. Wyatt Earp Blvd.
Dodge City, Kansas 67801
(620) 225-1142
03/07
Printed in U.S.A.
TABLE OF CONTENTS
PAGE NO.
WARRANTY ---------------------------------------------------------------------------------------- 1
SCALES WARRANTY & SERVICE POLICY ---------------------------------------------- 2
OPERATOR QUALIFICATIONS -------------------------------------------------------------- 3
SAFETY -------------------------------------------------------------------------------------------- 4-14
OPERATION --------------------------------------------------------------------------------------15-21
LUBRICATION-------------------------------------------------------------------------------------22
SPECIFICATIONS---------------------------------------------------------------------------------23
PTO CHART ----------------------------------------------------------------------------------------24
DIMENSIONS ------------------------------------------------------------------------------------25-28
REPAIR PARTS ----------------------------------------------------------------------------------29-75
WARRANTY
ROTO-MIX LLC, warrants to the original purchaser all products manufactured by it to be
free from defects in material and workmanship under normal use and service.
ROTO-MIXs obligation under this warranty is limited to repairing or replacing, as the
company may elect, free of charge and without charge for installation, at the place of
business of a dealer or distributor authorized to handle the equipment covered by this
warranty or at a ROTO-MIX plant, any parts that prove, in the companys judgment, to be
defective in material and workmanship within one (1) year after delivery to the original
purchaser, and still owned by the original purchaser.
It is a condition of this warranty that the original purchaser must fill out the warranty card
furnished by ROTO-MIX and that it be returned to ROTO-MIX and be recorded in
ROTO-MIXs owner file for this warranty to be valid. In the event an owners card is not on
file at the ROTO-MIX office, the warranty period will extend only from date equipment was
picked up or delivered from the ROTO-MIX plant.
It is a condition of this warranty that if within the aforesaid period of time, said equipment,
product or parts are determined by the original purchaser to be defective as herein provided, then such defective part or parts must be delivered by or through a dealer and/or
distributor to ROTO-MIX at its factory with transportation prepaid or warranty shall be of
no force or effect and shall be waived by the purchaser. If ROTO-MIX, or its duly authorized representative, shall find that such returned part or parts are defective and such defects, or defect, are included in and covered by said warranty, then such defective part or
parts shall promptly be replaced without charge to the purchaser, F.O.B. the ROTO-MIX
plant.
This warranty shall not apply to any item, manufactured in whole or in part by ROTO-MIX,
which shall have been operated in a manner not recommended by ROTO-MIX nor which
shall have been repaired, altered, neglected, tampered with, or used in anyway which in
the companys opinion adversely affects its performance.
This warranty shall in no way make ROTO-MIX liable to anyone for personal injuries or
damages, loss of time, or expense of any kind either direct or indirect resulting from part
failure or defect.
This warranty is subject to acts of God, fire and existing conditions of supply and demand,
or production, or ability or inability to deliver, or for any other valid reason beyond the reasonable control of ROTO-MIX, to obtain materials, manufactured replacement parts, or
make delivery thereof.
No distributor, dealer, agent, or employee of ROTO-MIX is authorized to extend any other
or further express or implied warranty or incur any additional obligation on ROTO-MIXs
behalf in connection with the sale of this product.
ROTO-MIX reserves the right to make changes in design, or additions to, or improvements in its equipment without obligation to install such changes, additions, or improvements in equipment previously manufactured.
OPERATOR QUALIFICATIONS
Operation Of this mixer/feeder shall be limited to competent and experienced
persons. In addition, anyone who will operate or work around a mixer/feeder must use
good common sense. In order to be qualified, he or she must also know and meet all
other qualifications, such as:
1. Some regulations specify that no one under the age of sixteen (16) may
operate power machinery. It is your responsibility to know what these
regulations are in your area and/or situation.
2. Current OSHA regulations state in part: At the time of initial assignment and
at least annually thereafter, the employer shall instruct EVERY employee in
the safe operation and servicing of all equipment with which the employee is,
or will be involved.
3. Unqualified persons are to STAY OUT OF THE WORK AREA.
4. A person who has not read and understood all operating and safety
instructions is not qualified to operate the machinery.
SAFETY
SAFETY
SAFETY
READ BEFORE
YOU FEED
READ BEFORE
YOU FEED
READ BEFORE
YOU FEED
SAFETY
TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS
MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING
YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS. FAILURE TO
FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.
SAFETY FIRST
REMEMBER: The careful operator is the best operator. Most accidents are caused by human
error. Certain precautions must be observed to prevent the possibility of injury or death.
A. Check to see that no obstructions are present in the mixer prior to start
up.
B. Before loading, run the mixer empty and check all operations.
C. Do not overload the mixer, as the mixing efficiency may be reduced
and unit damage may occur. (See loading instructions).
D. Remove all moisture drain plugs if the mixer is going to set in the rain
or snow.
E. Be sure all shields are in place before operation.
F. Use common sense when operating.
SAFETY
READ BEFORE
YOU FEED
SAFETY
READ BEFORE
YOU FEED
SAFETY
READ BEFORE
YOU FEED
SAFETY
READ BEFORE
YOU FEED
PTO SPEED
540 RPM
1000 RPM
DIMENSION (A)
14 inches (356 mm)
16 inches (406 mm)
SAFETY SIGNS
FORAGE
EXPRESS
10
SAFETY SIGNS
FORAGE
EXPRESS
11
SAFETY SIGNS
FORAGE
EXPRESS
FRONT VIEW
FORAGE
EXPRESS
REAR VIEW
12
SAFETY
READ BEFORE
YOU FEED
13
SAFETY
READ BEFORE
YOU FEED
REMEMBER
Your best assurance against accidents is a careful and responsible
operator. If there is any portion of this manual or function you do not
understand, contact your dealer or the ROTO-MIX plant.
BEFORE OPERATION:
Carefully study and understand this manual.
Do not wear loose-fitting clothing which may catch in moving parts.
Always wear protective clothing and substantial shoes.
Keep wheel lug nuts or bolts tightened to specified torque.
Assure that agricultural implement tires are inflated evenly.
Give the unit a visual inspection for any loose bolts, worn parts or cracked
welds, and make necessary repairs. Follow the maintenance safety
instructions included in this manual.
Be sure that there are no tools lying on or in the mixer/feeder.
Do not use the unit until you are sure that the area is clear, especially
children and animals.
Because it is possible that this mixer/feeder may be used in dry areas or the
presence of combustibles, special precautions should be taken to prevent
fires and fire fighting equipment should be readily available.
Dont hurry the learning process or take the unit for granted. Ease into it and
become familiar with your new mixer/feeder.
Practice operation of your mixer/feeder and its attachments. Completely
familiarize yourself and other operators with its operation before using.
Securely attach to towing unit. Use a high strength, appropriately sized hitch
pin with a mechanical retainer.
Do not allow anyone to stand between the tongue or hitch and the towing
vehicle when backing up to the mixer/feeder.
14
SAFETY
READ BEFORE
YOU FEED
DURING OPERATION:
Beware of bystanders, particularly children! Always look around to make
sure that it is safe to start the engine of the towing vehicle or move the unit.
This is particularly important with higher noise levels and quiet cabs, as you
may not hear people shouting.
NO PASSENGERS ALLOWED - Do not carry passengers anywhere on, or
in, the tractor or equipment, except as required for operation.
Keep hands and clothing clear of moving parts.
Do not clean, lubricate or adjust your mixer/feeder while it is moving.
Be especially observant of the operating area and terrain - watch for holes,
rocks or other hidden hazards. Always inspect the area prior to operation.
Do not operate near the edge of drop-offs or banks.
Do not operate on steep slopes as overturn may result.
Operate up and down (not across) intermediate slopes. Avoid sudden
starts and stops.
Pick the levelest possible route when transporting across fields. Avoid the
edges of ditches or gullies and steep hillsides.
Be extra careful when working on inclines.
Periodically clear the equipment of brush, twigs or other materials to prevent
buildup of dry combustible materials.
Maneuver the tractor or towing vehicle at safe speeds.
Avoid overhead wires or other obstacles. Contact with overhead lines could
cause serious injury or death.
Avoid loose fill, rocks and holes; they can be dangerous for equipment
operation or movement. Allow for unit length when making turns.
Do not walk or work under raised components or attachments unless
securely positioned and blocked.
Keep all bystanders, pets and livestock clear of the work area.
Operate the towing vehicle from the operators seat only.
Never stand alongside of the unit with engine running. Never attempt to start
engine and/or operate machine while standing alongside of unit.
15
SAFETY
READ BEFORE
YOU FEED
16
SAFETY
READ BEFORE
YOU FEED
17
SAFETY
READ BEFORE
YOU FEED
18
19
OPERATION:
Trailer mounted mixers can be furnished with single tractor controls or dual controls.
Dual controls are standard unless specified.
1. Single controls operate as follows: Spout goes down first - door opens
second. Door closes first - spout goes up second.
2. The disadvantage of the single control is that it does not let you adjust
the spout height without first closing the door.
ROTO-HAY PROCESSOR
The ROTO-HAY PROCESSOR is designed for processing hay into the mixer. This
eliminates the need for grinding hay, which saves the time and expense of grinding
and can save up to 18% loss from wind and handling.
THE ROTO-HAY PROCESSOR MUST BE PROPERLY USED
ALWAYS USE DRY HAY
Drain rain water out of mixer before use. 1 of rain in a 354-12 equals (54 gal) 440
lbs. of water which will increase the moisture in 1000 lbs. of dry hay (12%) to 38%
moisture or 500 lbs. of dry hay to 53% moisture.
The ROTO-HAY PROCESSOR will handle small amounts of damp hay, but this is
done at your own risk. ROTO-MIX will not warranty bent or broken rotor tubes, bent or
broken augers, or bent hay pans caused from misuse, wet hay, foreign objects, and/or
overloading.
HAY PREPARATION:
1. SMALL BALES - (60 to 150 lbs., 2 or 3 wire) Remove twine or wire from
bales and break bales apart by pushing into a pole with a front end
loader.
2. LARGE SQUARE BALES - (3 x 4 x 8 or 4 x 4 x 8)
A. Position bale so you can et to end of bale with front end loader.
B. Remove twine or wrapping.
C. With front end loader, pull a 12 flake away from the bale so it can
be picked up with loader bucket - or - by adding 3 or 4 teeth (12
long) to the top of your loader bucket, you can stab the end of the
bale and pick up a 12 flake to lay on the mixer hay pan.
3. ROUND BALES
A. Remove twine or wrapping.
B. Cut bale with a ROTO-BALE CUTTER a minimum of 5 times to part
the bale into a minimum of 12 chunks. More times may be desired
for ease of handling.
C. Break bales apart by pushing into a pole with a front end loader so
the hay can be loaded in quantities of approximately 200 lbs. at a
time.
20
MIXER INFORMATION
The mixer trailers are equipped with recapped tires with a new tread cap.
21
LUBRICATION CHART
DISENGAGE PTO & SHUT OFF POWER BEFORE LUBRICATING THE MACHINE.
LOOSE OR FLOPPY CLOTHING SHOULD NOT BE WORN BY THE OPERATOR.
OIL BATH: Fill the oil bath with 30 weight motor oil to sight plug level.
GREASE BANK: Grease every 100 hours.
FRONT END BEARINGS: Grease every 100 hours.
INPUT BEARINGS: One (1) on input shaft beneath mixer/feeder. Grease every 100
hours.
PTO SHAFTS & U-JOINTS: Grease every 10 to 20 hours.
GEARBOX: Prior to operation, remove the uppermost plug and replace with vent plug
provided. After the first 100 hours of operation, drain the initial oil,
preferably warm. Flush the gear case with an approved non-flammable,
non-toxic solvent and refill with oil. Thereafter oil should be changed
every 2500 hours or every 12 months, whichever occurs first. Fill the
gearbox with 1-1/2 pints of either AGMA 5 EP or GL 90 lube.
SAFETY
SAFETY
SAFETY
READ BEFORE
YOU FEED
READ BEFORE
YOU FEED
READ BEFORE
YOU FEED
22
414-14 SPECIFICATIONS
Capacity (Cu. ft.) .......................................... 410
Struck level capacity (Cu. ft.) ....................... 470
Top Auger Bearing (Front) ........................... 1-3/4 4-Bolt
Top Auger Bearing (Rear)............................ 2-1/2 4-Bolt
Bottom Auger Bearing (Front)...................... 2-3/16 4-Bolt
Bottom Auger Bearing (Rear) ...................... 3 4-Bolt
Rotor Bearing (Front) ................................... 2-7/16 4-Bolt
Rotor Bearing (Rear).................................... 3-1/2 4-Bolt
Top Auger Sprockets ................................... 100 B 21H & 80 B 70
Bottom Auger Sprockets .............................. 100 B 13H & 100 B 45
Rotor Sprocket ............................................. 100 B 112
Jackshaft Sprockets..................................... 60 B 54 & 80 B 17H Trk & Stat 1000 PTO
60 B 42 & 80 B 17H - Trl 540 PTO
Drive Sprockets............................................ 60 B 17H - Trk & Stat 1000 PTO
60 B 25H - Trl 540 PTO
Top Auger Flighting...................................... 3/8 x 20OD RH 14 Pitch
Bottom Auger Flighting ................................ 1/2 x 20OD RH & LH Full Pitch
Tub Bottom Construction ............................. 3/8 Steel
Auger Bottom Construction.......................... 3/8 Steel
Right Side Sheet Construction..................... 10GA (1/8) Steel
Left Side Sheet Construction ....................... 7GA (3/16) Steel
Front End Sheet Construction...................... 7GA (3/16) Steel
Rear End Sheet Construction ...................... 7GA (3/16) Steel
23
PTO CHART
414-14
PTO
(% ENGINE SPEED)
GAS
STANDARD
TRANS
GAS
AUTOMATIC
TRANS
DIESEL
STANDARD
TRANS
40
45
50
55
85
2:1 Gearbox
50
55
60
65
70
75
INPUT
SPROCKET
JACKSHAFT
SPROCKET
17 Tooth
15 Tooth
17 Tooth
15 Tooth
42 Tooth
42 Tooth
54 Tooth
54 Tooth
16 Tooth
42 Tooth
18 Tooth
16 Tooth
15 Tooth
18 Tooth
17 Tooth
15 Tooth
42 Tooth
42 Tooth
42 Tooth
54 Tooth
54 Tooth
54 Tooth
DIESEL
AUTOMATIC
85
2:1 Gearbox
21 Tooth
42 Tooth
TRANS
STANDARD TRANSMISSIONS: REQUIRE OPPOSITE ENGINE ROTATION PTO &
DRIVELINE KIT #650015.
AUTOMATIC TRANSMISSIONS: REQUIRE ENGINE ROTATION PTO, 2:1
GEARBOX, & DRIVELINE KIT #650069.
1000
TRACTOR
17 Tooth
54 Tooth
DRIVE
(OPTIONAL)
540
TRACTOR
DRIVE
(STANDARD)
25 Tooth
42 Tooth
17 Tooth
54 Tooth &
17 Tooth
17 Tooth
54 Tooth &
17 Tooth
17 Tooth
54 Tooth &
17 Tooth
BELT RATIO
30 HP 5V-3 Groove 16 &
5V-3 Groove 6.3
3 Belts 5VX-1000
STATIONARY
1750 RPM
ELECTRIC
24
22 1/2"
40"
OPTIONAL HAY
PROCESSOR
64 3/4"
53 1/2"
24 5/8"
2"
13 3/8"
47 1/2"
24"
20 1/2"
185 1/2"
2 1/2"
168"
17"
4 3/4"
2"
125"
25"
15"
112"
31"
12 3/8"
198"
All Dimensions & Specifications are Approximate and Subject to Change Without Notice
25
100 1/2"
92"
APPROXIMATE WEIGHT
414-14B ON TRAILER .......10,400 lbs
W/HAY PROCESSOR.........11,120 lbs
*INCREASE DIMENSIONS BY 4
WHEN OPTIONAL RISER
BLOCKS ARE INSTALLED.
DECREASE DIMENSIONS BY 3
WHEN OPTIONAL 255R70 X 22.5
TIRES ARE INSTALLED.
12
SPOUT
17
SPOUT
36
34
39
37
14
19
11
16
22 1/2"
OPTIONAL HAY
PROCESSOR
40"
2"
*A *B
*42"
CL
46"
92"
D
C
185 1/2"
2 1/2"
168"
4 1/2"
2"
125"
**17"
THRU 21"
79 5/16"
155 5/16"
242"
All Dimensions & Specifications are Approximate and Subject to Change Without Notice
26
OPTIONAL HAY
PROCESSOR
22 1/2"
2"
42"
CL
46"
92"
39" - 41"
CONVEYOR WEIGHT
24................... 330 LB.
36................... 415 LB.
48................... 500 LB.
50" - 52"
60" - 62"
AUGER SIDE
OF PEDESTAL
46"
11"
All Dimensions & Specifications are Approximate and Subject to Change Without Notice
27
98 1/2"
92"
22 1/2"
OPTIONAL HAY
PROSESSOR
APPROXIMATE WEIGHT
414-14B ON TRUCK.............. 9,700 LB.
WITH HAY PROCESSOR ..... 10,420 LB.
12
SPOU
T
17
SPOU
T
46
44
49
47
13
18
10
15
40"
106"
52"
D
A
96"
183"
168"
2 1/2"
4 3/4"
2"
125"
112"
4"
CL
CL
12"
CL
40"
120"
32"
414-14B TRUCK
MOUNTING DIMENSIONS
All Dimensions & Specifications are Approximate and Subject to Change Without Notice
28
PARTS PAGES
TABLE OF CONTENTS
PAGE NO.
TRUCK HYDRAULIC SCHEMATIC --------------------------------------------------------30
JOYSTICK ASSEMBLY -------------------------------------------------------------------------31
WIRING SCHEMATIC FOR DISCHARGE DOOR---------------------------------------32
SPOUT RUBBER-----------------------------------------------------------------------------------33
17 SPOUT ASSEMBLY -------------------------------------------------------------------------34
SPOUT MAGNET ASSEMBLY ----------------------------------------------------------------35
CHAIN CONVEYOR ASSEMBLY ------------------------------------------------------------36
CHAIN CONVEYOR HYDRAULIC ASSEMBLY -----------------------------------------38
STAGGERED ROTOR ASSEMBLY ----------------------------------------------------------39
3 ARM ROTOR ASSEMBLY -------------------------------------------------------------------40
5 ARM ROTOR ASSEMBLY -------------------------------------------------------------------41
STANDARD TOP & BOTTOM AUGER ASSEMBLY ------------------------------------42
OPTIONAL TOP & BOTTOM AUGER ASSEMBLY-------------------------------------43
FRONT END ASSEMBLY -----------------------------------------------------------------------44
OIL BATH DOOR ASSEMBLY ----------------------------------------------------------------45
DISCHARGE DOOR ASSEMBLY-------------------------------------------------------------46
HAND WHEEL ASSEMBLY--------------------------------------------------------------------47
LUBRICATION ASSEMBLY -------------------------------------------------------------------48
SCALE INDICATOR ASSEMBLY ------------------------------------------------------------49
TRUCK LOAD CELL SCALE FRAME ASSEMBLY -------------------------------------50
TRUCK WEIGH BAR SCALE FRAME ASSEMBLY-------------------------------------51
TRUCK WEIGH BAR SADDLE BRACKET------------------------------------------------52
TRUCK LOAD CELL SADDLE BRACKET ------------------------------------------------53
TRAILER WEIGH BAR SCALE FRAME ASSEMBLY----------------------------------54
STATIONARY LOAD CELL SCALE FRAME ASSEMBLY----------------------------55
STATIONARY WEIGH BAR SCALE FRAME ASSEMBLY ---------------------------56
STATIONARY FLOOR MOUNT SCALE ASSEMBLY ----------------------------------57
TRAILER FRAME ASSEMBLY ---------------------------------------------------------------58
TRAILER HUB & SPINDLE ASSEMBLY---------------------------------------------------59
TRAILER DRIVELINE ASSEMBLY ---------------------------------------------------------60
TRUCK DRIVELINE ASSEMBLY (STANDARD)-----------------------------------------61
TRUCK DRIVELINE ASSEMBLY (AUTOMATIC) --------------------------------------62
STATIONARY SINGLE ELECTRIC MOTOR DRIVE ASSEMBLY -----------------63
TRAILER DRIVELINE (STANDARD) -------------------------------------------------------64
TRAILER DRIVELINE WITH CV JOINT (OPTIONAL) -------------------------------65
TRUCK DRIVELINE REAR AUTOMATIC TRANS -----------------------------------66
TRUCK DRIVELINE REAR STANDARD TRANS -------------------------------------67
TRUCK DRIVELINE FRONT----------------------------------------------------------------67
DRIVE ASSEMBLY -------------------------------------------------------------------------------68
GEARBOX ASSEMBLY -------------------------------------------------------------------------70
LOWER AUGER FLOAT ASSEMBLY ------------------------------------------------------71
HAY PROCESSOR ASSEMBLY---------------------------------------------------------------72
HAY PROCESSOR (CABLE OPTION) ASSEMBLY -------------------------------------73
HAY PROCESSOR (HYDRAULIC OPTION) ASSEMBLY -----------------------------74
FENDERS & MUD FLAPS ----------------------------------------------------------------------75
29
NOTE C
NOTE D
1
4
REF. NO
1
2
3
4
PART NO.
362152
781068
781066
781309
DESCRIPTION
QTY.
12V DC HYDRAULIC POWER UNIT VALVE ......................1
3/8 x 71 HYD HOSE ASSY - 3/8MP x 1/4MP...................1
3/8 x 60 HYD HOSE ASSY - 3/8MP x 1/4MP...................1
3/8 x 71 HYD HOSE ASSY - 1/4MP x 1/4MP...................2
30
JOYSTICK ASSEMBLY
BOTTOM
TOP
TO 12 VOLT
3
BROWN
RED
YELLOW
BROWN
RED
GREEN
YELLOW
GREEN
1
REF. NO
1
2
3
PART NO.
781056
185575
357705
DESCRIPTION
QTY.
SWITCH WIRE ASSEMBLY....................................................1
JOYSTICK BRACKET..............................................................1
JOYSTICK SWITCH .................................................................1
31
RED
BROWN
GREEN
YELLO
4
GREEN
7
YELLO
5
TO BATTERY
HYDRAULIC VALVES
STARTER
3
2
7
REF. NO
1
2
3
4
5
6
7
8
9
BROWN
RED
HYDRAULIC VALVES
PART NO.
780081
362152
368010
781247
781055
358025
358299
358031
358223
DESCRIPTION
QTY.
JOYSTICK SWITCH PANEL ASSEMBLY .............................1
12V DC HYDRAULIC POWER UNIT VALVE ......................1
90o 1/4MP X 1/4FPSW - 1/8 ORIFICE ................................4
12V DC HYDRAULIC UNIT WIRE ASSEMBLY ..................1
TRUCK TO MIXER WIRE ASSEMBLY .................................1
4GA BATTERY CABLE X 10.................................................1
4-6GA COPPER CRIMP RING - 3/8 STUD ...........................2
16GA WIRE (RED) 22 AMP. - 18 ...........................................1
14-16GA 1/4 RING CONNECTOR .........................................1
32
SPOUT RUBBER
REF. NO
1
2
3
PART NO.
150161
150150
187274
DESCRIPTION
QTY.
SPOUT RUBBER.......................................................................1
SPOUT RUBBER END PLATE ................................................2
SPOUT BACK-UP ANGLE.......................................................1
33
17 SPOUT ASSEMBLY
#75002817........................ SPOUT ASSY WITH MAGNET
#75002917........................ SPOUT ASSY NO MAGNET
4
2
5
8
5A
3
1A 1B
5B
6
REF. NO
PART NO.
1A
1B
2
3
4
5
5A
5B
6
7
8
850084
850085
150160
187274
850050
750019
400712
850053
400205
402005
407021
DESCRIPTION
QTY.
34
1
7
8
5
4
6
2
4
REF. NO
PART NO.
1
2
3
4
5
6
7
8
850084
150159
375004
400205
402005
402405
407021
407022
DESCRIPTION
QTY.
35
36
REF. NO
PART N O.
1
2
3
4
5
6
7
8
9
10
11
12
160025
188412
188413
340316
402006
405652
400205
402005
407021
409916
188390
874114
874110
874118
874116
874112
874120
188304
188302
188417
188418
874115
874111
874119
341323
400210
400810
13
14
15
16
17
18
19
20
21
DESCRIPTION
QTY.
37
326
38
DESCRIPTION
QTY.
15
15
90
90
90
60
60
60
10
39
1
8
3
13
9
2
6
10
4
7
11
4
12
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
850556
872563
850007
150344
189373
150346
189374
410005
405765
400910
405654
401106
850502
781417
DESCRIPTION
QTY.
40
9
1
8
3
10
2
13
7
11
5
4
12
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
850557
872563
850007
150344
189373
150346
189374
410005
405765
400910
405654
401106
850502
781417
DESCRIPTION
QTY.
41
1
5
2
4
10
6
BOTTOM AUGER
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
850559
382026
382024
150126
850500
850561
382023
382022
150411
850501
DESCRIPTION
QTY.
42
2
1
3
6
TOP AUGER
4
5
11
8
12
9
10
BOTTOM AUGER
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
850570
382026
150126
850570B
382026
381625
382023
150126
850571
382021
382020
150411
DESCRIPTION
QTY.
1
2
REF. NO
PART NO.
1
2
3
340427
340437
340436
DESCRIPTION
QTY.
44
13
1
11
4
5
6
10
12
7
8
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
351056
370323
370316
370322
370321
370320
370319
850574
850575
370317
189503
850576
850573
DESCRIPTION
9
QTY.
45
5
6
2
4
10
9
3
1
7
8
REF. NO
PART NO.
1
2
3
4
5
6
7
8
850019
850020
150049
404350
404003
402512
184267
780109
364055
364954
364400
184259
150385
A
B
C
9
10
DESCRIPTION
QTY.
46
11
1
2
13
9
12
6
11
10
3
5
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
850079
850077
872030
872349
189105
189106
407047
410305
189112
150387
340216
150244
185114
DESCRIPTION
QTY.
47
1
5
1
1
1
3
6
2
REF. NO
PART NO.
1
2
3
A
B
4
C
D
5
E
6
F
7
G
356001
310750
185045
185547
150212
150211
185341
DESCRIPTION
QTY.
48
6
3
REF. NO
PART NO.
1
2
3
4
5
6
7
184283
402205
850048
405661
401106
185493
850047
DESCRIPTION
5
QTY.
49
6
5
4
2
REF. NO
PART NO.
1
2
3
4
5
6
7
8
870527
182998
870519
870501
872053
182915
185997
182881
DESCRIPTION
QTY.
50
2
1
3
4
REF. NO
PART NO.
850080
850274
182998
185609
872169
2
3
4
DESCRIPTION
QTY.
51
1
TRUCK FRAME
2
3
REF. NO
PART NO.
1
2
3
4
5
6
189294
873122
860088
850359
150938
150939
DESCRIPTION
QTY.
52
TRUCK FRAME
REF. NO
PART NO.
1
2
3
4
872150
185567
450860
185569
DESCRIPTION
QTY.
53
2
1
REF. NO
PART NO.
1
2
3
872169
850070
185609
DESCRIPTION
QTY.
54
6
2
6
2
1
REF. NO
PART NO.
1
2
3
4
5
6
7
872019
870519
182915
185124
182881
870501
871053
DESCRIPTION
QTY.
55
1
3
REF. NO
PART NO.
1
2
3
850076
872169
185609
DESCRIPTION
QTY.
56
REF. NO
PART NO.
1
2
3
4
5
450863
850524
151016
404280
404281
DESCRIPTION
QTY.
57
3
2
1
REF NO.
PART NO.
651024
374100
374101
374002
780904
850578
850565
850564
750018
850055
441405
404210
750006
781248
2
3
4
5
6
7
8
372425
372625
8A
781209
372422
372614
DESCRIPTION
QTY.
58
5
7
1
3
6
4
2
11
10
14
12
8
13
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
342209
342210
342211
342212
150117
372209
372306
372308
400102
401820
402911
404003
405625
407724
DESCRIPTION
QTY.
59
6
5
4
12
11
8
2
2
3
2
2
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
338230
185480
151093
185299
341024
340225
150511
150551
150509
780601
338029
685599
338440
12
DESCRIPTION
QTY.
60
9
13
8
7
14
12
9
9
3
5
2
11
11
10
1
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
332610
335024
188043
332611
320720
187306
340225
850265
185483
780494
340221
183319
185504
780486
DESCRIPTION
QTY.
61
11
10
14
8
7
2
12
4
6
5
1
13
2
3
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
332610
335024
188043
332611
320720
150704
340228
850265
338042
344022
183251
185483
780486
150706
DESCRIPTION
QTY.
62
10
3
7
1
2
4
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
330654
330607
340228
150716
150229
850072
850074
781001
320611
330807
DESCRIPTION
8
QTY.
A
B
C
D
E
324023
336138
324022
336030
325100
63
10
3
1
REF. NO
1
A
B
2
3
4
5
6
7
8
9
10
11
12
11
PART NO.
338444
338442
338443
338473
338450
338747
338467
338452
338463
338486
338487
338488
338489
12
DESCRIPTION
QTY.
64
11
12
13
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
338468
338469
338470
338473
338443
338452
338463
338489
338486
338501
338502
338508
338509
7
6
DESCRIPTION
QTY.
65
REF. NO
PART NO.
1
2
3
4
5
6
7
8
338451
338443
338473
338450
338448
338447
338452
338449
DESCRIPTION
QTY.
66
3
REF. NO
PART NO.
1
2
3
338053
338422
338435
DESCRIPTION
QTY.
1
3
4
REF. NO
PART NO.
1
2
3
4.
338053
338420
338435
338422
DESCRIPTION
QTY.
48
10
47
11
12
13
12
4
13
14
15
11
45
46
41
10
40
4
44
5
39
38
37
35
43
16
36
42
35
31
29
33
4
16
26
32
25
30
34
20
21
19
28
18
17
REF. NO
PART NO.
1
2
3
4
187154
412412
850065
410851
27
16
DESCRIPTION
24
23
22
QTY.
68
PART NO.
DESCRIPTION
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
410008
150224
850151
187153
185487
412416
873054
187159
187157
410012
410852
405754
850129
189723
850508
321145HT
342048
150075
340427
151097
150276
150271
330642
320611HT
412428
188043
330807
150275
340528
183616
340229
330625
780015
150700
850054
850510
850545
850507
321075HT
320820HT
342040
185329
850567
187316
340556
41
42
43
44
45
46
47
48
QTY.
69
1
2
11
4
5
6
2
2
3
7
4
8
10
9
4
3
2
1
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
344214
344215
344211
344210
344217
344213
344209
344223
344216
344212
344218
DESCRIPTION
QTY.
70
1
3
11
2
5
7
3
8
10
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
850155
850154
150418
405752
405656
405655
402406
402010
402006
400210
400206
9
11
DESCRIPTION
QTY.
71
5
7
8
4
2
6
9
11
10
12
REF. NO
PART NO.
1
2
3
4
5
6
7
8
9
10
11
12
850058
850237
850063
150198
850300
850057
872354
850299
150141
150814
385002
150223
DESCRIPTION
QTY.
72
2
3
5
4
REF. NO
PART NO.
1
2
3
4
5
6
7
8
850090
150088
150189
412204
150669
850066
850067
412325
DESCRIPTION
QTY.
73
9
10
6
7
4C
4A
9
4B
REF. NO
PART NO.
1
2
3
4
188226
357702
362207
780109
368007
364954
364055
364
781055
850060
872357
A
B
781072
781320
A
B
10
781330
781319
368010
A
B
C
D
5
6
7
8
DESCRIPTION
QTY.
74
4
1
3
2
5
REF. NO
1
2
3
4
5
PART NO.
872108
872120
183087
370202
370200
DESCRIPTION
QTY.
FENDER WELDMENT........... .................................................2
MUD FLAP BRACKET WELDMENT.....................................2
MUD FLAP STRAP...................................................................4
FRONT MUD STRAP................................................................2
REAR MUD STRAP ..................................................................2
75