You are on page 1of 17

A PROPOSAL ON THE SUBJECT OF TECHNICAL PRODUCT SPECIFICATION

THE SUBJECT OF NORMATIVE DOCUMENT DEVELOPMENT

Date of proposal: Author of proposal:


THE PROPOSAL of Technical Specification

Secretariat of Organization TCs WGs

Title of proposal: "Dimensions of special product of residential area manhole cover, of round opening, of cast iron construction, size DN.615mm or 24.30in (D.615/620), and up to 125 kN loading class." Material: - cast iron - of grade to fit the loading class in compliance with thicknesses of pieces.

The document proposal comes to settle up a dimensional based normative document (as case, a publication / deliverable) in the form of a technical product specification concerning the dimensions of special product of a residential area manhole cover - in order to complete with requirements of one or more regional basic standard(s) of cast/ductile iron manhole covers, - e.g. the regional CEN standard "EN124 - Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control", - or, with other basic standard concerning street, or residential area, manhole covers - as long as the basic standard (e.g. as the EN124 is) does not apply for dimensions of special products of manhole covers. Thus, the proposed normative document (norm) aims to specify the main dimensions for a special product of a grey/ductile iron residential area manhole cover of rated dia DN.615mm / 24.30in round opening; - and must, as case may be, completed with other standards which refers to testing, marking, quality control. (e.g. the EN124 CEN standard).
Short description of design related to product and main dimensions:

= Square frame (at top side) with round opening; - overall dia. of lid piece: 615/616mm (~24.25in), - top opening of frame: dia. 620mm (24.4in), - round, - top length of frame: 725mm, (~28.5in), square - lower opening of base of frame: > round base frame, (with square top side), - dia. 795, - over the flange, to fit a 800mm dia. of round manhole top opening (entry). > square frame (at base and top), 725x725 or 767x767mm, to fit a 700x700mm (~28x28in) or a 750x750mm (~30x30in) square manhole top entry. - clearance (clear opening) of frame, - about 575mm (~22.63in), - a key hole of about 1...1.25sq.cm. clear opening which allows an easy opening using common tools, - optional, on designs of lid and frame - a hinge or locking system may be added.

The product which the subject of standardization consists in, may be useful for outdoor networks water supply, as well sewerage or storm water manholes, - in residential areas.
The type of public standardization document, considering the proposal may later transform into:

> concerning the terminology of EN45020:2006 description: - prestandard (3.3), technical specification (3.4), - in order to complete with CEN standard EN124, which is a basic standard (5.1). > concerning the terminology of ISO/CEI-2:2004: - technical specification (3.4), technical report (3.5), publicly available specification (3.7).

LID Piece DN.615 - D.615(616)/620 - Loading class, up to 125 kN

Top plane view - anti-skid pattern details

20 x 26 = 520

A1

A1

A2

Overall

R TI CRIPTION I S INS SERVE N R D RE

A2

26

in-between sequent slots

O 615(616)

LID Piece - DN.615

Top plane view - Anti-skid pattern with central part detail

LID Piece - DN.615

Grated LID Piece - DN.615 - loading class, - 125 kN

Top plane view

Grated LID Piece - DN.615 - loading class, - 125 kN

Section A - A

C + B = 64 > C = 38 ; B = 26 40 ; 24 42 22

Grated LID Piece - DN.615 - loading class, - 125 kN

Bacside partial view

FRAME Piece D.615/620-S.725


- Loading class, up to 125 kN

Front side effective plane view - anti-skid pattern details only

24 x 28 = 672

in-between opposite slots

O e ram ff go nin pe po To

0 62

28 in-between sequent slots

Top side of frame

725

FRAME Piece - DN.615 (D.615/620)


- square top and square base structure only, without front-side anti-skid pattern - loading class, - 125 kN

Top plane view

O 620 at top 725 at top Overall

FRAME Piece - DN.615 (D.615/620) - 750x750


- square top and square base structure, without front-side anti-skid pattern - Loading class, - 125 kN - Applicable on 700x700 square manhole entry

Section A - A

FRAME Piece - DN.615 (D.615/620) - 750x750


- square top and square base structure only, without front-side anti-skid pattern - Loading class, - 125 kN - Applicable on 750x750 square manhole entry

Section A - A

FRAME Piece - DN.615 (D.615/620)


- square top and round base structure only, without front-side anti-skid pattern - loading class, - 125 kN

Top plane view

FRAME Piece - DN.615 (D.615/620)


- square top and round base structure only, - loading class, - 125 kN

Side (the right half) plane view

FRAME Piece - DN.615 (D.615/620) - D.800


- Loading class, - 125 kN

Section A - A
- square top and round base structure, without front-side anti-skid pattern - Applicable on 800 dia. round manhole entry

FRAME Piece - DN.615 (D.615/620) - D.800


- square top and round base structure, - Loading class, - 125 kN - Applicable on 800 dia. round manhole entry

Backside plane view

You might also like