Professional Documents
Culture Documents
APPLICATION
For large diameter extra heavy duty style augers.
*A029927
C41
*2429926
C4/U44
A001532
RCDS05
For drilling and tunnel boring in the most extreme hard rock and concrete.
*2429930
C7
A000789
DS05
For drilling and tunnel boring in the most extreme hard rock and concrete. For drilling in soft to medium-hard cutting conditions. Sharp nose profile for maximum penetration. For drilling in soft to medium-hard abrasive cutting conditions. Snap ring attached.
A001536
RC4SHF
*A001402
RC4SSF
PART NO.
2429927 2429926 A001532 2429930 A000789 A001536 A001402
DESCRIPTION
TOOTH,C41 TOOTH,C4 TOOTH,RCDS05 TOOTH,C7 TOOTH,DS05 TOOTH,RC4SHF TOOTH,RC4SSF
STYLE
STEP STEP STEP STEP STEP STEP STEP
PER LBS LBS / KGS / PCS/ LBS / KGS / BUCKET EACH BUCKET BUCKET PALLET PALLET PALLET
15 15 15 15 12 15 10 2.58 2.60 2.52 2.30 2.52 2.55 2.54 40.05 40.25 39.05 35.15 30.51 39.30 25.95 18.17 18.26 17.71 15.94 13.87 17.83 11.77 750 750 750 750 600 750 500 2002.50 2012.50 1952.50 1757.50 1576.00 1965.00 1297.50 908.32 912.86 885.64 797.19
891.31 588.54
Notes: 1. Full pallet of teeth contains 50 buckets * These teeth use A000679 snap ring RETURN TO TABLE OF CONTENTS
ph: 1.800.447.2781
email: augertools@terex.com
Effective Date: August 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
714.86
APPLICATION
For medium to hard drilling conditions with added collar to prevent material from entering block and stopping tooth rotation. For drilling in soft to medium-hard cutting conditions. Sharp nose profile for maximum penetration. Extra long gauge length for added penetration. Heavy duty design accepts all step shank tools. Welded with 7018 or 8018 low-hydrogen rod. For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.
*A001401
RC4LSF
*A001639
RC450F
70796
RC4
A001406
RC4F
PART NO.
A001401 A001639 70796 A001406
DESCRIPTION
TOOTH,RC4LSF TOOTH,RC450 BLOCK, RC4 BLOCK,RC4F
STYLE
STEP STEP STEP STEP
PER LBS LBS / KGS / PCS LBS / KGS / BUCKET EACH BUCKET BUCKET PALLET PALLET PALLET
10 15 10 8 3.09 2.20 3.60 2.43 31.55 34.25 35.80 20.45 14.31 15.54 16.24 9.28 500 750 500 400 1577.50 1712.50 1790.00 1022.50 715.54 776.78 811.93 463.80
Notes: 1. Full pallet of teeth contains 50 buckets *These teeth use A000679 snap ring
ph: 1.800.447.2781
email: augertools@terex.com
Effective Date: August 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.