Professional Documents
Culture Documents
0003
Midea CAC
Air Cooled Screw Chiller (Reversed M type condenser)
- New Product Notice
We are pleased to announce the new developments on our Midea Air Cooled Screw Chiller product range resulting on various applications.
PRODUCT FEATURES
After years of marketing validation and factory testing, Midea launched the New Generation air cooled screw product to the market. The new generation products are the premium solution for industrial and commercial applications where installers, consultants and building owners require optimal performances and optimized quality. The chillers are designed to meet current and future requirements in terms of reliability, energy efficiency and intelligent control with the latest technologies available today. Comparing the old generation air cooled product the new generation product use the reversed M type condenser to increase the heat exchanger area and leave more space for servicing and adding other accessories required in the future such as heat recovery and hydraulic module etc. -Environmentally friendly refrigerant R134a. -High efficiency twin-screws type compressor. -Low-noise&vibration high efficiency fans, high-efficiency rifled pipe with aluminum finned heat exchanger. -Touchable screen PLC control system with user-friendly operator interface. Open protocol of RS485 with is BMS compatible. -Each unit is completely assembled, factory wired, evacuated, charged, tested and comes complete and ready for installation.
PRODUCT ADVANTAGES
-Environmental Care -Outstanding Reliability -Simple Structure Easy Installation -Economical Operation Cost -State of Technique, Accuracy Control -Lower Operating Noise and Vibration
EXV REAL PID MODULATION
No. of Compressors
1 1 1 2 2 2
No. of Fans
6 8 10 12 14 16
Running range
T1 Condition: 515 Rating flow volume 20% 8 0.086 380/400V-3N-50Hz as standard 415V-3N-50Hz as an option Rating Voltage 10% 2 Rating frequency 2% Delta-Star 1.0MPa 4 times High corrosive environment and high humidity should be avoid. The height of dropsy should not be higher than the base of the unit on the spot 2143
PRODUCT SPECIFICATION
Unit Model Cooling kW capacity Power supply Rated power kW consumption Type Compressor Quantity Energy adjustable range% Type Refrigerant chargekg Type Fans Quantity Air Volume m3/h Motor input kW Type Water Side Heatexchanger Water Volume m3/h Water pressure dropkpa Inlet/outlet Pipe diameter mm
2.
LSBLGCW360A
LSBLGCW450A
LSBLGCW600
364 113
1
450
380/400V/3P/50Hz
594 184
1
138
Semi- hermetic, twin screw compressor
1
25%,50%,75%,100% 4-step ( 50%~100% stepless as option) R134a
80
122
125
23000 6 2.8 6
23000 8 2.8 8
Shell-and-tube heat-exchanger
20000 10 1.8 10
62.6
50 DN125
77.4
55 DN125
102 60 DN125
/kW)
Dimension mm Length mm widthmm heightmm Shipping weightkg Running weightkg 3730 2280 2370 3320 3520
0.086
4730 2280 2370 4325 4530 5700 2280 2400 5000 5200
1) Nominal cooling capacities are based on the following conditions: Chilled water inlet/outlet temp: 12/7; Outdoor temp (DB/WB):35/24. 2) The applicable ambient temperature range of R134a air-cooled screw units is 21 ~ 43,
PRODUCT SPECIFICATION
Unit Model Descriptions Cooling capacity Power supply Rated power consumption compressor LSBLGCW720A LSBLGCW800A LSBLGCW900A
kW
kW
729 227 2
810
380/400V/3P/50Hz
902 278 2
251
Semi- hermetic, twin screw compressor
Type Quantity Energy adjustive range% Type Refrigerant chargekg Type Fans Quantity Air Volumem3/h Motor inputkW Type Water Side Heatexchanger Water Volume m3/h Water pressure drop kPa Inlet/outlet Pipe diametermm
2.
80*2
80+122
122*2
Reversed M sharp Heat exchanger, High efficient exchanger tube + aluminum fins
12 23000 12 2.8 12
14 23000 14 2.8 14
Shell-and-tube heat-exchanger
16 23000 16 2.8 16
125 65 DN150
7425 2280 2430 6700 7000
155 80 DN150
9425 2280 2430 8900 9200
Water side fouling factor (m /kW) Lengthmm widthmm Dimensionmm heightmm Shipping weightkg Running weightkg
1) Nominal cooling capacities are based on the following conditions: Chilled water inlet/outlet temp: 12/7; Outdoor temp (DB/WB):35/24. 2) The applicable ambient temperature range of R134a air-cooled screw units is 21 ~ 43,
PROMOTION MATERIAL:
Product introduction presentation ---Available Product catalogue---Available in the end of March 2011. IOM(Users manual)--- Available in the end of April 2011.
PRICE INFORMATION:
Get the price information from Midea local office or Branch Company
AHRI Certification under process for the selection software and except to be ARI approved in the end of 2011.