Professional Documents
Culture Documents
ENABLING OBJECTIVES
Identify and explain the effect of various forces, both controlled and uncontrolled, on an underway vessel. Identify a pivot point and explain factors affecting it. Identify and explain purpose of different lines aboard a moored vessel.
SHIPHANDLING
Mark of distinction for the professional mariner. As much of an art as it is a science. Must understand the theory before you can effectively grasp the lessons of practical exercises.
FORCES
Forces effect a ships movement. Two types:
Controllable Uncontrollable
UNCONTROLLABLE FORCES
Those forces acting on a vessel which are out of the shiphandlers control: Wind Current
The force of one knot of current on a vessel is equivalent to approximately 30 Knots of wind.
Visibility
CONTROLLABLE FORCES
Propeller Rudder Lines Anchor Bow Thruster or Azimuth Thruster
INERTIA -- MOMENTUM
Inertia: vessels tendency to remain at rest. Momentum: vessels tendency to remain in motion when in motion. Displacement: the volume or weight of water displaced by the hull (equaling the weight of the ship)
INERTIA -- MOMENTUM
The greater the vessels displacement
the greater the inertia and momentum the greater the friction of water against the hull the more power is needed to overcome underwater and above water resistance the longer it takes the vessel to accelerate or decelerate the lower the speed required to maintain maneuverability.
BANK SUCTION
What is Bank Suction? The bodily movement of a ship toward the near bank due to the decrease in pressure as a result of increased velocity of flow of water past the hull in a restricted channel.
BANK CUSHION
What is Bank Cushion? In a restricted channel, especially one with steep banks, bank cushion tends to force the bow away from the bank due to increase in the bow wave on the near side.
PROPULSION CONFIGURATIONS
Single Screw Twin Screw outboard Twin Screw inboard Controllable pitch propellers
PROPELLERS
Right / Left handed Propeller thrust: resultant force transferred to ship from rotation of propeller. What does a propeller do?
Pressure differences Thrust
PROPELLERS
Side Force: moves or walks the stern of the vessel to one side or the other. Propeller moves and a force is created moving the stern in the direction of the rotating screw. Maximum effect when overcoming inertia Least effect when momentum is gained.
SCREW CURRENT
The flow of water away from a turning propeller. Produces a large force against the rudder. Results in a large force against the rudder as well as the force created by the propeller to move the vessel fore or aft.
RUDDER EFFECT
The force generated by the pressure of water against the flat surface of the rudder. Used to maintain or come to a desired heading. Rudder effect depends on: a. Amount of rudder applied b. Vessel speed c. Rudder size The slower the ship's speed, the more rudder is needed to maintain course.
PIVOT POINT
The point on the center line which the ship pivots when the rudder is put over. The point of the ship upon which it turns and which scribes the turning circle When going ahead located about 1/3 the vessel's length aft of the bow.
TURNING CIRCLE
The path used by a vessel when completing a 360 degree turn with constant rudder angle. Diameter will decrease with increased rudder angle or speed. Advance Transfer Tactical Diameter Final Diameter
TURNING CIRCLE
The rudder is put over to start a turn the stern is forced away from the direction of the turn. The ship has to overcome the inertia resisting rotational acceleration - a few lengths of the ship passes before there is an effect Momentum causes the ship to continue in the original direction while coming to new course
Lines
GETTING UNDERWAY
Take in breast lines Take in quarter spring Put rudder over to side of pier Use bow spring line to assist in kicking stern out Rudder amidship Take in bow spring
MOORING
Assess conditions for mooring Make approach between 10-15 degrees off pier face (adjust as necessary for set) Put over spring line Take all way off Pivot onto pier Put over and secure all lines
MAN OVERBOARD
RECOVERY METHODS
Shipboard pickup, person in the water. Windward or Leeward side?
Shipboard Pickup
Anderson Turn (Destroyer Turn) Williamson Turn Racetrack Turn Y-Backing Delayed Turn
Williamson Turn
Used in low visibility because it makes good the original track. Used if it is believed that a person fell overboard some time ago and is not in sight.
Racetrack Turn
Y-Backing
Delayed Turn
Review Objectives
What 2 kinds of forces affect a ship? Define the following:
Propeller thrust Side force Screw current Rudder effect Shallow Water Effect
QUESTIONS??