Professional Documents
Culture Documents
Professional Audio
Sefa
TOA's history with audio started as far back as 1934 and expanded into the CCTV field in 1983. The wealth of experience accumulated over the years made it possible for TOA to offer the most sophisticated video, audio and innovative products to fulfill diverse monitoring and surveillance applications for any environment. TOA's extensive product range makes it easy for end users to configure a system that precisely meets specific requirements for systems ranging from small to complex, for applications from basic to extremely sophisticated. TOA makes it possible to create high-performance, cost-effective solutions featuring TOA's acclaimed total reliability. Featuring such leading edge products such as digital video recorders, IP network intercom systems, and network camera systems, TOA continues to refine its current CCTV, security intercom and audio product lines as well. Increasing demands for better security and safety today drive TOA to continually advance its technologies that serve society's needs.
Digital Video Recorders 3 6p Combination Dome Camera System 7 10p Wide Dynamic Range Color Camera 11 12p Compact Color Cameras 13p Vandal Resistant Day/Night Camera 14p Lens/Bracket 15p Housing/Other 16p Multiplexer 17p 1-Channel Digital Video Recorder 18p Switcher/Other 19p Coaxial Multi-Transmission Unit 20p Network Camera System 21 22p Network Intercom System 23 25p Network Audio Adapter 26p Voice Security Intercom System 27 28p Index 30p
C-DR161-08
(HDD 80GB)
C-DR161D1
(HDD 160GB with DVD)
C-DR161-1
(HDD 160GB)
C-DR161D3
(HDD 320GB with DVD)
C-DR161-3
(HDD 320GB)
C-DR161D6
(HDD 600GB with DVD)
C-DR161-6
(HDD 600GB)
C-DR091-08
(HDD 80GB)
C-DR091D1
(HDD 160GB with DVD)
C-DR091-1
(HDD 160GB)
C-DR091D3
(HDD 320GB with DVD)
C-DR091-3
(HDD 320GB)
C-DR091D6
(HDD 600GB with DVD)
C-DR091-6
(HDD 600GB)
The TOA C-DR161/091 Series is made up of 16 DVR (digital video recorder) units, offering a wide range of video input, HDD storage and DVD burning capabilities. Up to eight DVR units can be linked in cascade configurations to form a large-scale system with a maximum of 128 cameras connected. By linking as many as four C-RM1000 remote control units, a sophisticated zone-based security system can be configured. Operational efficiency and economy are greatly enhanced because there is no need for additional special equipment.
A network can be set up for live surveillance and playback, with web browser control, and email transmission to report alarm. A high picture quality of 720 x 240 pixels and high frame rate of 100 IPS(Image Per Second) are provided. Each camera can have individual recording rate and picture quality settings. There is a wide selection of recording and search modes, as well as backup to a built-in DVD-R or external USB memory. PC viewer software is also automatically created. Password and USB key corresponding to the operation level protects the DVR system from unauthorized access.
Utilizing the new DVR C-DR161/091 Series makes it possible to assemble large-scale systems using up to eight DVR units in cascade configuration. Each DVR unit can have two external HDD expansion units and the system can be efficiently operated using up to a maximum of 4 remote controllers. Such large systems allow connecting up to 128 cameras with HDD expanded externally by up to 4.8TB per DVR unit. Configuring systems as needed can be performed efficiently as well as economically as special or dedicated devices are not required.
software .
Recorded data can be backed up to the built-in DVD-R drive or external USB memory. Whenever a backup copy is made, viewer software that allows image viewing on a PC is also copied to the backup medium.
A DVR from the C-DR161/091 Series offers remote surveillance, search and playback of recorded images via a 10/100 BASE-T network. Remote surveillance can be performed just with unit controls without dedicated software and control can be performed via a web browser such as Internet Explorer. In addition, there is an e-mail transmission function to report alarm.
operation.
The C-RM1000 remote controller can control the new DVR CDR161/091 Series in addition to TOA combination dome cameras via the DVR. A single remote controller can control up to eight DVR units and when the maximum eight DVRs are cascaded, controlling 128 combination dome cameras becomes possible.
efficiency.
Effective surveillance is accomplished by dividing surveillance into multiple zones for security purposes, and this is desirable for many sites including factories, commercial facilities, schools and buildings. The new DVR also makes it possible to group using the C-RM1000 remote controller, helping to easily configure optimal, sophisticated systems.
C-RM1000
Remote Control Unit
The C-RM1000 Remote Controller is used to remotely control the 9-CH/16-CH Digital Video Recorder (C-DR161/091 Series). It can also control combination cameras connected to the Digital Video Recorder. A-built in 3-axis joystick allows main operations to be performed with one hand.
Digital Video Recorder's recording and playback operation can be remotely controlled by the Remote Controller. It is also possible to display the Digital Video Recorder's menu to change settings. Camera images can be viewed in full-screen, 4-segment, 9-segment, or 16-segment split screen displays or in sequential displays. (Monitor 2 output can provide only fullscreen, 4-segment split screen, and sequential displays.) The Combination Dome Camera's pan, tilt, and zoom operation, as well as focus and iris adjustments can be remotely controlled. It is also possible to display the Combination Dome Camera's menu to change settings. The Combination Dome Camera's preset positions can be easily programmed. Images set to the preset position can also be displayed on the monitor screen. Digital video recorder numbers, camera numbers, and position numbers can be programmed into a function key (F1 F4) or number (1 508). Pressing the programmed key or number permits the corresponding camera image to be displayed on the full screen. Functions, such as Auto-focus, Auto operation, and electronic zoom, can be programmed into a function key (F1 F4) or number (1 508). Two or more cascade-connected Digital Video Recorders can be grouped, allowing images of all Digital Video Recorders in the group to be displayed on one master monitor. Further, multiple Digital Video Recorders can be viewed in sequential order through group sequence. Accessible functions can be restricted by setting a password. There are 3 operation levels and different passwords can be set for each level. Operations of the Digital Video Recorder's Monitor Outputs 1 and 2 can be individually restricted. This function is convenient if two or more Remote Controllers are connected in the system.
C-RF1000
Interface Unit
The C-RF1000 Interface Unit is used to operate the 9-CH/ 16CH Digital Video Recorder (C-DR091/161 Series) with multiple remote controllers (up to 4 remote controllers can be connected). Equipped with on RS-232C terminal, the C-RF1000 can connect to a PC.
Function Programming
Password Setting
Monitor Locking
Web Functions
The Digital Video Recorder is equipped with a variety of web-accessible functions. Connecting to the unit using a PC over a LAN cable allows the video recorder remotely to monitor camera outputs, or to search and/or play back recorded images using a web browser. The following specific functions can be accessed on a connected PC using the web interface:
Simultaneous operation of 3 client PCs Viewing of live images Control of combination dome cameras Search and/or playback of recorded images Operation duplicating that of the keys mounted on the Digital Video Recorder's front panel
System Requirements
PC OS: Windows 2000/XP CPU: Celeron, 600 MHz or more Memory: 64 MB of more Available HDD space: No limit Browser Internet Explorer 5.5 or later Java Sun JRE 1.4 or later
System chart - 2
Camera Camera Camera
LAN
S-ATA Video (BNC) Video (BNC) RS-485 Interface unit C-RF-1000 Output 1 (BNC) RS-485 RS-485
1
Live only
C-DR091 C-DR161 Series RS485 (Buss wiring) RS485 (Buss wiring) Output 2 (BNC)
8 C-DR091 C-DR161 Series
Video (BNC)
Link input(BNC)
Output 1 (BNC)
RS-485
LAN
System chart - 3
Remote Controller C-RM1000
3F
4 5
2F
1 2 3
1F
Interface unit C-RF1000
Janitor's room
FEATURES
Higher resolution delivers better images.
Horizontal resolution of 540 lines. (C-CC774/574)
Electronic Image Stabilizer (C-CC774/574). Intelligent image optimizing using the Wide
Three auto focus modes.
C-CC774
OUTDOOR USE
Protecting privacy.
Privacy Masking function (maximum 8 areas).* Restricting camera movement.
255 preset positions + Home position 420X zoom (optical 35X, electronic 12X) Electronic Image Stabilizer Tilt rotation range +5 to -185(using Auto-Flip function) Pan rotation range continuous 360 Pan/tilt maximum rotating speed is 360/sec 1/4 type CCD image device 540 lines high resolution Wide dynamic range Autofocus High-sensitivity function (color and B/W modes) Preset sequency function Privacy masking function Restricting camera movement Auto-trace function Auto-tour function Motion detection function Auto-pan function Preset image freeze function Dust/Water Protection: IP66 RS-485 protocol compatible
alarm input. Preset operation start with Timer program function. Software for maintenance. Flexible installation options. Titling options. Other functions.
Tilt (vertical) range: +5 to 185.* Auto flip function* Rotation speed can be varied to match lens zooming ratio in manual operation mode. Freeze preset function* Flicker-free operation Alarm input and auxiliary contact output. RS-485 protocol control.
*C-CC774/764/574/564 only.
C-CC574
INDOOR USE
255 preset positions + Home position 420X zoom (optical 35X, electronic 12X) Electronic Image Stabilizer Tilt rotation range +5 to -185 (using Auto-Flip function) Pan rotation range continuous 360 Pan/tilt maximum rotating speed is 360/sec 1/4 type CCD image device 540 lines high resolution Wide dynamic range Autofocus High-sensitivity function (color and B/W modes) Preset sequency function Privacy masking function Restricting camera movement Auto-trace function Auto-tour function Motion detection function Auto-pan function Preset image freeze function RS-485 protocol compatible
C-CC764
OUTDOOR USE
C-CC714
OUTDOOR USE
255 preset positions + Home position 276X zoom (optical 23X, electronic 12X) Tilt rotation range +5 to -185(using Auto-Flip function) Pan rotation range continuous 360 Pan/tilt maximum rotating speed is 360/sec 1/4 type CCD image device 480 lines high resolution Wide dynamic range Autofocus High-sensitivity function (color and B/W modes) Preset sequency function Privacy masking function Restricting camera movement Auto-trace function Auto-tour function Motion detection function Auto-pan function Preset image freeze function Dust/Water Protection: IP66 RS-485 protocol compatible
255 preset positions + Home position 264X zoom (optical 22X, electronic 12X) Tilt rotation range +5 to -90 Pan rotation range continuous 360 Pan/tilt maximum rotating speed is 360/sec 1/4 type CCD image device 480 lines high resolution Autofocus High-sensitivity function (color mode) Preset sequency function Restricting camera movement Auto-trace function Auto-tour function Auto-pan function Dust/Water Protection: IP66 RS-485 protocol compatible
C-CC564
INDOOR USE
C-CC514
INDOOR USE
255 preset positions + Home position 276X zoom (optical 23X, electronic 12X) Tilt rotation range +5 to -185 (using Auto-Flip function) Pan rotation range continuous 360 Pan/tilt maximum rotating speed is 360/sec 1/4 type CCD image device 480 lines high resolution Wide dynamic range Autofocus High-sensitivity function (color and B/W modes) Preset sequency function Privacy masking function Restricting camera movement Auto-trace function Auto-tour function Motion detection function Auto-pan function Preset image freeze function RS-485 protocol compatible
255 preset positions + Home position 264X zoom (optical 22X, electronic 12X) Tilt rotation range +5 to -90 Pan rotation range continuous 360 Pan/tilt maximum rotating speed is 360/sec 1/4 type CCD image device 480 lines high resolution Autofocus High-sensitivity function (color mode) Preset sequency function Restricting camera movement Auto-trace function Auto-tour function Auto-pan function RS-485 protocol compatible
C-A711DM C-BC711P
Ceiling Suspension Bracket
The C-BC711P is exclusively designed to be used to suspend TOA's outdoor combination camera from a ceiling or eaves.
C-BC711PM
Pole Mounting Bracket
Using the optional YS-60B and C-BC711W, the C-BC711PM can mount the outdoor combination camera on a pole.
C-BC711W
Wall Mounting Bracket
The C-BC711W is designed to be used to mount TOA's outdoor combination camera on a wall.
C-BC511C
Ceiling Mount Cover
The C-BC511C is a camera installation cover designed solely for mounting TOA's Combination Cameras. The cover is used when mounting the Combination camera directly to a ceiling or wall or suspending it from the ceiling. The cover is used to make it difficult for individuals to see the camera's orientation.
C-BC511C-S
Ceiling Mount Cover (Smoked)
The C-BC511C-S is a camera installation cover designed solely for mounting TOA's Combination Cameras. The cover is used when mounting the Combination camera directly to a ceiling or wall or suspending it from the ceiling. The cover is used to make it difficult for individuals to see the camera's orientation.
C-BC511U
Flush Ceiling Mounting Bracket
The C-BC511U bracket is designed to be exclusively used for flush ceiling mounting of TOA's combination camera. Use this bracket when mounting the camera to the ceiling surface where the fixing screws cannot be securely installed, such as on the plaster panel of the dual-construction ceiling. Also, use this bracket to minimize the exposure of the camera.
C-BC511U-S
Flush Ceiling Mounting Bracket (Smoked)
The C-BC511U-S bracket is designed to be exclusively used for flush ceiling mounting of TOA's combination camera. Use this bracket when mounting the camera to the ceiling surface where the fixing screws cannot be securely installed, such as on the plaster panel of the dual-construction ceiling. Also, use this bracket to minimize the exposure of the camera. The bracket is used to make it difficult for individuals to see the camera's orientation.
C-BC511W
Wall Mounting Bracket
The C-BC511W Wall Mounting Bracket is specially designed to mount TOA's Combination Cameras to wall surfaces. Install the unit only in a location that can structurally support weight of the unit and camera.
C-BC511P
Ceiling Suspension Bracket
The C-BC511P is a Ceiling Suspension Bracket designed solely for suspending TOA's Combination Cameras from the ceiling.
C-BC511A
Anchor Bracket
The C-BC511A is specially designed to mount TOA's Combination Cameras directly on the ceiling. The bracket facilitates mounting of the camera on the plasterboard in the double ceiling or other locations where the mounting screws cannot be installed securely.
System Example
Sensor max. 8 Combination Dome Cameras C-CC564 C-MS161D max. 3 C-CC514 Monitor max. 3 C-CC764 Sensor Multiplexer
RS-232C
Alarm Unit
10
FEATURES
New Wide Dynamic Range
Provides a new level of performance with natural looking images even in backlight condition.
Day/Night operation
Clear images are provided even in unsatisfactory light by B/W mode.
Backlight compensation
Allows optimal viewing of dark areas in a backlight condition.
C-RU10
Remote Control Interface
Camera function settings, and color and brightness adjustments can be remotely controlled with ease by connecting the C-RU10 to a camera featuring camera remote function. The C-RU10 permits control signals to be superimposed over the camera video signal by connecting cameras with a single coaxial cable, and motion detection or alarm signals from the camera to be received. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipment rack (1 unit size). Power source: 220 240V AC.
Alarm input Sensor
Newly developed DSP Easy focusing without using the ND filter Alarm input Motion detection Fully automatic operation mode shift Easy menu-driven setup 2X Electric Zoom Screen Reverse function (Horizontal/Vertical)
SYSTEM EXAMPLE
Alarm output
C-RU10
Monitor
Conventional Method
CCD output CCD output
1/100sec 1/50sec
Electronically combining the images taken using both low-speed and high-speed shutter gives single clear image.
11
Backlight compensation
TOA'S Wide Dynamic Range cameras have been designed to overcome the problems encountered by conventional CCD cameras. Most of these problems originate from trying to accurately focus when the area of coverage includes areas with varying brightness. Because cameras in some cases are affected by the bright areas they are monitoring, there are some hard-to-see dark areas. When backlight compensation mode is selected, the camera divides an image into 48 segmented areas and compares the brightness in each area, to automatically adjust the required amount of backlight compensation for the desired segments.
48 segmented areas
Pattern 1
Pattern 2
The user selects the image area that is most important for viewing by segments. The backlight function then works to adjust light conditions concentrating on the selected image area, providing optimal view for effective monitoring. The 3 segment selection options for compensation are: Pattern 1 that selects segments located in the center and lower half of the screen. Pattern 2 for a user-defined single area. Manual for precise user-defined control for selecting one or more segments that will be backlight-compensated.
* Backlight compensation is switched off when the wide dynamic range function is used.
Sensitivity boost allows cameras to provide good color image quality for dark areas.
(color image)
12
FEATURES
Easy power requirements
TOA compact color cameras operate on 24V AC or 12V DC.
High-performance CCDs
Each camera incorporates a 1/4 CCD with a resolution of 440,000 pixels resulting a high horizontal resolution that exceeds 470 lines.
C-CV14-CS
INDOOR USE
C-CV14-2
INDOOR USE
2X varifocal lens
To easily allow on-site adjustment for the viewing angle, each camera is fitted with a 2X manual varifocal lens having an auto iris.
Backlight compensation
To cope with varying lighting conditions, backlight compensation can be switched on or off as required.
C-BC20U
Flush Ceiling Mounting Bracket
C-CV24-2
INDOOR USE
C-CV44-3
OUTDOOR USE
13
FEATURES
High resolution (horizontal: 500 lines)
1/3" CCD with a resolution of 440,000 pixels (PAL) (NTSC: 380,000 pixels)
High sensitivity
0.5lx in color mode and 0.05lx in B/W mode, with electronic sensitivity boost of up to 4X
Day/Night operation
Clear monochrome image is provided even under poor lighting conditions.
Backlight compensation
Allows optimal viewing of dark areas in a backlight condition.
C-CV854D-3
OUTDOOR/INDOOR USE
Easy viewing
Flicker-free function Noise reduction function
Easy installation
3-axis (horizontal, vertical and rotational) adjustment mechanism Direct output to the monitor
C-A854H
Heater Unit
The C-A854H heater unit is designed to be used in conjunction with the C-CV854D-3 Vandal resistant day/night camera. Installing this heater unit in the camera allows the camera to be used in locations exposed to extremely low ambient temperatures.
Why will correct focus set during the day go off at night?
Thats because focus has not been precisely set. Shooting with an auto-iris lens, the amount of light during the day makes the lens iris opening stay small. This results in a deep depth of field. But as day turns to night, the lens iris opens to get more light, the depth of field is reduced and the focus goes off. To adjust the focus, it is necessary to open the lens iris and reduce the depth of field. When using an auto-iris lens, the ND filter must be used to approximate nighttime light conditions so that the lens iris stays open and depth of field is reduced before adjusting the focus. * Neutral Density (ND) Filter: A filter which reduces light coming through the camera lens without any effect on the lights color temperature.
ND Filter
The depth of field will change depending on the focal length of the lens, the iris of the lens and the shooting distance. And in surveillance cameras, the lens iris has an effect on focusing. As the diagram makes clear, the wider the lens iris opening size, the shallower will be the depth of field.
TOA Compact Cameras do not require an ND filter for adjusting focus. By just setting the focus adjustment switch on the camera to ON, the lens iris opens and a shallow depth of field is maintained. To achieve perfect focus simply and easily, just set the adjustment switch ON, adjust ON OFF focus and then set the switch OFF.
14
Lens/Bracket
CT-0312GA
Ultra-Wide-Angle Lens
CT-0412GA
Wide-Angle Lens
CT-0812GA
Standard-Angle Lens
CT-10VFG
CT-2ZMGA
2 Varifocal Lens
CT-R5VFG
CT-R3VFG
C-BC31
Camera Mounting Bracket
C-BC21 C-BC11
Camera Mounting Bracket Camera Mounting Bracket
15
Housing/Other
C-CH100
Outdoor Camera Housing
C-CH100FH
Outdoor Camera Housing with a fan and a heater
C-BC100K
Wall Mounting Bracket for C-CH100 and C-CH100FH
C-BC200K C-CH210FH
Outdoor Camera Housing with a fan, a heater, a defroster and a wiper
C-CH200
Outdoor Camera Housing
C-CH200FH CC-6000A
Indoor Camera Housing Outdoor Camera Housing with a fan and a heater
C-BC200H
Housing Fixing Stand for C-CH200, C-CH200FH and C-CH210FH
CC-4901
BNC Plug (Set: 10 pieces)
BNC plug that allows solderless connection with coaxial cables. Compatible with 3C-2V or 5C-2V coaxial cables.
CC-4902
BNCJ-RCAP Plug
(Set: 10 pieces)
CC-4903
BNC-BNCJ Plug
(Set: 10 pieces)
CC-4904
BNC T-Shape Connector
(Set: 10 pieces)
CC-P5BB
Coaxial Cable with BNC Plugs (0.5m) (Set: 10 cables)
Cord for 0.5 m 3C-2V coaxial cables and double-ended BNC plugs
CC-01BB
Coaxial Cable with BNC Plugs (1m) (Set: 10 cables)
Cord for 1 m 3C-2V coaxial cables and double-ended BNC plugs
CC-05BB
Coaxial Cable with BNC Plugs (5m) (Set: 5 cables)
Cord for 5 m 3C-2V coaxial cables and double-ended BNC plugs
16
Multiplexer
FEATURES
Special Video Signal Processor Optimizes split-screen displays Digital Filter V-SYNC Position Compensation Circuit Multiple Split Screen Display
Live monitoring and DVR playback can be seen in all split screen options (16 segment only with C-MS161D).
16-segment 10-segment 9-segment
C-MS161D
16-Channel Duplex Multiplexer
1 5 9 13
2 6 10 14
3 7 11 15
4 8 12 16
1 1 5 2 6 3 7
2 4 8
1 4 7
2 5 8
3 6 9
C-MS91D
9-Channel Duplex Multiplexer
4-segment
1- segment
1 3
2 1 4
For live camera monitoring segments, cameras can be assigned to the desired position. With camera selection, a required camera can be assigned priority to always be shown (camera 1 selected).
"Seamless Operation" by Connecting 2 DVRs. Electronic Zoom, Auto Tilt and Auto Panning
Features Included.
Multi-Language Ability Summer Time (daylight savings) Remote control by C-RM500 Key-lock function
For example, when wishing to detect a person but not wishing to detect a dog, set the object size to be larger than the dog and smaller than a person. If the object size is set for 2 horizontal x 5 vertical frames, such as in the figure at right, a person's motion can be detected, but motion of the dog will not be detected.
C-MS161D * * * *
Live C-MS91D * * *
Motion Detection Area setting The full screen is divided into 16 areas (4 horizontal x 4 vertical) and motion detection can be set to activate in any of the 16 areas. For example, when wishing to eliminate constantly moving portions such as trees swayed by wind from the motion detection area, set the corresponding area to OFF(- -).
ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
1 area
ON ON ON ON ON ON ON ON
The multiplexer detect the change of brightness in the area that is larger than the set object size in the activated areas. Sensitivity Setting To minimize detection errors, five levels of sensitivity settings are provided to allow fine adjustment control. Alarm Recording The number of recording frames for the camera that detected motion can be set to increase.
17
C-DR0105: HDD 500GB (2 x 250GB) C-DR0101: HDD 240GB (2 x 120GB) Recording Functions
500GB storage with 250GB x 2 HDDs built-in
(C-DR0105)
Other Functions
Network connectability Logging Useful status indication Summer Time (Daylight Savings Time) Key-lock function Compact single rackmount (1U) size
Pre- and Post-Alarm recording Time Lapse recording Audio recording Mirroring enhances reliability
Playback Functions
Time Search Block Search Time Shift Search
Picture quality
18
Switcher/Other
Manual Switcher
These manual mechanical lock-type switchers can manage up to six (CC-3011B) or twelve (CC-3021B) camera inputs from a single output. Both units can also be mounted in a rack using an optional bracket.
CC-3011B
CC-3021B
Cable Compensator
Increase CCTV operational flexibility by off-setting video signal transmission line losses between camera and monitor. A 4-step cable selector and a semi-fixed output level controller are available to help provide the clearest possible on-screen images. System settings are based on cable type and cable running distance. Power sourse: 220/240V AC.
CC-3331B
CC-3350B
Video Distributor
The TOA's C-VD6 video distributor adds versatility to CCTV operation by distributing one video signal to six video outputs, or two different video signals each to three outputs. The unit is compact and lightweight and can be mounted on a standard rack cabinet with an optional bracket. Power sourse: 230V AC.
C-VD6
BASIC CONNECTIONS
Monitor Monitor
1 input, 6 distributions
BNC
2 input, 3 distributions
A
A
BNC
BNC Camera
C-VD6
Video distributor
BNC
B
Camera
C-VD6
Video distributor
BNC
19
FEATURES
Transmit video, audio and control signals
on one coaxial cable.
Video signal (simplex) Audio signal (duplex) Control signals (4 contacts/duplex)
Speaker output
1W (8 ohms) amplifier
C-AP105
Coaxial Multi-Transmission Unit (2 units in every set)
SYSTEM EXAMPLE
Video Camera Audio Audio Control Monitor
Sensor Max. 4
C-AP105
Control
C-AP105
Microphone
Speaker
Speaker
Microphone
20
Products Linup
(Lens is optional)
N-CC2564
All-in-one model equipped with 23X optical and 12X electronic zooms, capable of 255 preset camera positions. Rotation range: horizontal 360 continuous; vertical +5 to 185. High-speed horizontal and vertical rotations of up to 360 /sec. Maximum of 8 locations can be designated for privacy masking. Protocol for absolute coordinate designation. Bi-directional audio transmission (line input 1; line output 1) Alarm input x 8; Auxiliary contact output x 2 Power source: 24V AC
21
FEATURES
Transmits MPEG-4 and JPEG simultaneously (dual stream).
Monitors with smooth-movement images and records high-quality still images. Image output sizes and frame rates can be varied as required to satisfy bandwidth limitations of LAN and WAN networks.
MPEG-4
LAN WAN
MPEG-4ASP QVGA low-resolution images JPEG VGA high-resolution images
JPEG
Recording of High-quality JPEG Images
N-DR2000
System configuration
Speaker
Network Cameras
N-CC2360 Speaker N-VT2010
N-VR2010
Amplifier
Remote Controller
Microphone
Amplifier N-CC2564
IP Network
Headset Microhone
CCTV system
22
FEATURES
Exchanges, Multi Interface units and IP Stations can be
distributed over a data communications network. Can be connected to an existing local area network (LAN) or wide-area network (WAN). The system can also be easily connected to fiber-optic networks without restrictions on operating distance. Two types of exchanges are available: N-8000EX: 4 internal and 8 external speech links with PA paging output. N-8010EX: 1 internal and 2 external speech links without PA paging output. Up to 16 stations per exchange. System configured employing IP stations make communications possible without having to use an exchange unit. (IP Door Stations alone cannot be configured into systems without incorporating a IP Master Station.) The dedicated software program enables centralized control with a personal computer. System maintenance (verifying operation log and Line supervision) can also be performed with a personal computer and Internet browser. Can be connected to the Exchange of the EXES-2000 or EXES-6000 Intercom System by a tie-line, or the PBX exchange via the E&M lead signaling interface. The Multi Interface unit can interlock with an electronic lock system or CCTV surveillance system by way of contact input/output control function.
N-8000EX
IP Network Intercom Exchange (Internal: 4 links/External: 8 links)
The IP Network Intercom Exchange uses paket audio technology to permit connection of up to sixteen N-8000 Series stations, and features two outputs for public address paging. Simultaneous hand-free conversation is possible between staions. Moreover, the exchange is equipped with a networking interface, allowing up to 80 exchanges to be connected over a network using additional network intercom exchanges. The Exchange can be mounted in an EIA standard rack (1-unit size) or to a wall using the supplied bracket. Power source: 230V AC.
N-8010EX
IP Network Intercom Exchange (Internal: 1 link/External: 2 links)
The IP Network Intercom Exchange uses paket audio technology to permit connection of up to sixteen N-8000 Series stations. Simultaneous hand-free conversation is possible between stations. Moreover, the exchange is equipped with a networking interface, allowing up to 80 exchanges to be connected over a network using additional network intercom exchanges. The Exchange can be mounted in an EIA standard rack (1-unit size) or to a wall using the supplied bracket. Power source: 230V AC.
N-8000MI
Multi Interface Unit
The N-8000MI is a multi-interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Connecting the multi-interface to a local area network permits the ideal system for in-house or wide-area information transmission applications, such as paging, periodical broadcasts, and background music broadcasts, to be built between the multi-interface and IP intercom exchange or other multi-interface unit. The contact bridge function can be realized through contact input and output control. The N-8000MI also features the tie-line function to be connected the EXES-2000 intercom system or the EXES-6000 system. A total of up to 80 multi-interface units and IP intercom exchanges can be connected to a network. The unit can be mounted in an EIA standard rack (1-unit size) or to a wall using the supplied bracket. Power source: 230V AC.
23
MASTER STATION
N-8000MS
Multifunctional Master Station
N-8010MS
Standard Master Station
N-8011MS
Standard Hands-Free Master Station
N-8020MS
Industrial-Use Master Station
DOOR STATION
IP STATION
RS-191
Optional Handset Unit
N-8031MS
Flush-Mount Hands-Free Master Station
N-8540DS N-8050DS
Door Station IP Door Station
N-8500MS
IP Multifunctional Master Station
The N-8500MS is an IP multifunctional master station employing packet audio technology. Connecting the N-8500MS to a network (LAN or WAN) conversation of high sound quality to be made between the N-8500MS and intercom stations connected to the IP Intercom Exchange, or between the N8500MS units. Besides, the N-8500MS can be used in conjunction with the Multi Interface units through a network. In addition to the functions of the standard Master Station, Power can be supplied from the PoE (Power over Ethernet) switching hub. (In this case, an AC adapter is not required)
The N-8540DS is an IP door station employing packet audio technology. Connecting the N-8540DS to an IP network (LAN or WAN) conversation of high sound quality to be made between the N-8540DS and intercom station connected to the IP Intercom Exchange, or between the N-8540DS and IP multifunctional master station. Besides, the N8540DS can be used in conjunction with the Multi Interface units through a network. It is in full conformity with IP54 water-proof and dust-proof standards.
N-8031SB
Hands-Free Master Station Board Unit
N-8050SB
Hands-Free Substation Board Unit
AD-1210P (CE)/(CU)
AC Adapter for IP Station
BRACKET/OTHER
Surface Mount Back Box Flush Mount Back Box
YC-280 YC-290
(for N-8011MS) (for N-8000MS, N-8010MS and N-8020MS)
YS-13A
(for N-8050DS and N-8540DS)
YC-251
(for N-8031MS)
YC-150
(for N-8050DS and N-8540DS)
E-7000TB YC-241
(for N-8031MS)
Terminal Board
24
FUNCTIONS
Exchange Basic Functions
Conversation Hands-free conversation Handset conversation PTT conversation Call Individual call Redialing Recall Voice calling Group call Master call Incoming Call Selection Automatic connection Continuous call Speed Dialing Auto-dialing One-touch dialing Hold Mic Off Call hold Call transfer Automatic Transfer Group hunting Absence transfer Call forwarding Remote Response Executive Priority Paging Zone paging Paging All-call paging Paging Response Automatic response Zone number response Scan Monitor Door Remote Control (Door Station only) Time-out Group blocking Station Speaker Output Setting Ambient Noise Control
To LAN
N-8050DS
N-8010MS RS-191
N-8031MS
N-8011MS N-8000MS
N-8020MS
25
FEATURES
Real time transmission of high quality audio signals
over IP networks.
NX-100
wide frequency range from 50 Hz up to 14 kHz Multi transmission modes available LANs and dedicated lines as well as transmitting audio over the internet. Sophisticated autofocus modes add versatility. Equipped with the Voice Packet Loss Recovery and sampling frequency adjustment functions Simultaneous multi-location broadcasting and two-way communication capabilities widen scope of applications. 8 channels of contact inputs/outputs are provided. The RS-232C port on the NX-100 can be used to send serial data to and from remote areas. Software-driven operation or through input terminals. Simplified setup and maintenance using supplied setup software or web browser.
Front
Rear
NX-100S
Front
Rear
Comparison Table
Power source RS-232C port Input signal LED Input peak level LED Phantom power supply IPv6-compatible NX-100 AC adapter or 24V DC Yes No No No Yes NX-100S AC adapter only No Yes Yes Yes No
PC
Base
Dedicated line
LAN
Network Audio Adapter
equipment
Amplifier
MIXER
Dedicated line
PC
LAN
Network Audio Adapter
Router
Internet Amplifier
ASDL or ISDN
Modem router
LAN
Network Audio Adapter
Speaker
NOTES:
Note 1: Voice packet size Voice packet size other than for Line band of 1.5 Mbps or higher is for data of 1024 bytes. Voice packet size for Line band of 1.5 Mbps or higher is for data of 256 bytes (PCM)/32 bytes (Sub-Band ADPCM) data. Note 2: Voice Packet Loss Recovery Voice Packet Loss Recovery is a processing method when a voice packet cannot be received due to communication interference. Silence: Method of processing lost sectors as silence. Redundancy: Method of accurately outputting continuous losses of up to 8 packets. Resend: Method of accurately outputting continuous losses of up to 15 seconds. Note 3: Required band Required band represents the frequency band required for voice transmission. When it is necessary to transmit serial data, a transmission band is separately required.
136 369 68 92 34 51
26
MASTER STATION
MS-900
Master Station
SYSTEM FEATURES
System Capacity
Single Exchange 4 Master stations (enlargement unit: 2) 64 Substations (enlargement unit: 16) Up to 16 Exchanges 64 Master stations 1,024 Substations
FUNCTIONS
CALL-RELATED FUNCTION
Group Call TRANSFER-RELATED FUNCTION Call Transfer CALL FORWARDING-RELATED FUNCTIONS Call Forwarding Time-Based Call Forwarding N0-Answer Call Forwarding Busy Call Forwarding MONITOR-RELATED FUNCTION Scan Monitor PAGING-RELATED FUNCTIONS Zone Paging All-Zone Paging Emergency Paging External Source Distributiln Paging Time-Out Paging Redial TELEPHONE-RELATED FUNCTIONS Outging Telephone Calls Incoming Outside Line Calls (Direct-In Line) Incoming Outside Line Calls (Direct-In Dialing) Outside Line Connection Time-Out Outside Line Conversation Recording Outside Line Call Forwarding Time-Based Outside Line CallI Forwarding CONFERENCE-RELATED FUNCTIONS Three-Party Conference (Individual Call Conference) Emergency Conference (Up to 4 parties)
SYSTEM CONFIGURATION
VS-900MF Main Frame VS-900MS
Master Station Interface Card Telephone Interface Card Substation Interface Card Substation Interface Card for RS-190
VS-900AL
VS-900RS VS-910RS
Tie-Line Interface Card Direct Select Control Card Direct Select I/O Card
VS-900DI VS-910DI
VS-900SC Site Connector MS-900 Master station RS-150 Substation (Indoor Type) RS-160 Substation
(Indoor Vandal-Resistant Type) RS-170 Substation (Outdoor Vandal-Resistant Type) RS-180 Substation (Outdoor Vandal-Resistant Type with Control Output) RS-190 Full-Duplex Substation (Indoor Type with Control Output)
Paging Interface
16 control outputs 1 voice output
Option Handset
27
SUBSTATION
RS-150
Substation (Indoor Type)
RS-170
Substation (Outdoor Vandal-Resistant Type)
RS-190
Full-Duplex Substation (Indoor Type with Control Output)
RS-191
Option Handset for RS-190
RS-160
Substation (Indoor Vandal-Resistant Type)
RS-180
Substation (Outdoor Vandal-Resistant Type with Control Output)
SYSTEM EXAMPLE
Outside line PC (for programming and system maintenance)
SYSTEM SPECIFICATIONS
Exchange Method: PCM and space division Control Method: Common stored program control Maximum Cable Length Exchange to Master station: 1.5km (22AWG) Exchange to Substation: 800m (22AWG) (RS-190: 1.5km) Exchange to telephone: less than 500 (loop impedance) Exchange to Exchange: 1.0km (22AWG) (total extension length) Wiring Master station: 2 twisted pairs Substation: 2-core shielded (RS-190: 2 twisted pairs) Telephone: 1 twisted pair Exchange to Exchange: 2-core shielded for Data, 2 twisted pairs for Audio (per link) Frequency Response: 300 3,400Hz
Speaker
Speaker
VS-900 Exchange
Substations Master stations Speaker
Conversation Method Substation to Master station: Voice Switch or PTT-activated talk-back Master station to Master station: Full-duplex handset communication Power Requirements Exchange: AC mains (PU-200) or 24V DC VS-900DI/VS-910DI: 24V DC Operating Temperature Exchange and Master station: 0 to 40C Substation: 10 to 50C
* Substation paging needs an external amplifier. ex: TOA A-1031 or similar amplifier. Matching transformer such as the TOA MT-502U needed (Part Number 514-04-013-20).
28
Index
A C-A
C-B
C-C
AD-1210P C-A711DM C-A854H C-AL80 C-AP105 C-BC100K C-BC100T C-BC11 C-BC200H C-BC200K C-BC21 C-BC31 C-BC41 C-BC511A C-BC511C C-BC511C-S C-BC511P C-BC511U C-BC511U-S C-BC511W C-BC711P C-BC711PM C-BC711W C-CC364 C-CC514 C-CC564 C-CC574 C-CC714 C-CC764 C-CC774 C-CH100 C-CH100FH C-CH200 C-CH200FH C-CH210FH C-CV14-2 C-CV14-CS C-CV24-2 C-CV44-3 C-CV854D-3
24p 9p 14p 10p 20p 16p 16p 15p 16p 16p 15p 15p 15p 9p 9p 9p 9p 9p 9p 9p 9p 9p 9p 11p 8p 8p 7p 8p 8p 7p 16p 16p 16p 16p 16p 13p 13p 13p 13p 14p
C-D
C-V CC-
CT-
C-DA1000-1 C-DA1000-2 C-DR0101 C-DR0105 C-DR091-08 C-DR091-1 C-DR091-3 C-DR091-6 C-DR091D08 C-DR091D1 C-DR091D3 C-DR091D6 C-DR161-08 C-DR161-1 C-DR161-3 C-DR161-6 C-DR161D08 C-DR161D1 C-DR161D3 C-DR161D6 C-IF500 C-MS161D C-MS91D C-RF1000 C-RM1000 C-RM500 C-RU10 C-VD6 CC-01BB CC-05BB CC-3011B CC-3021B CC-3331B CC-3350B CC-4900 CC-4901 CC-4902 CC-4903 CC-4904 CC-6000A CC-P5BB CT-0312GA CT-0412GA CT-0812GA CT-10VFG CT-2ZMGA CT-R3VFG CT-R5VFG
5p 5p 18p 18p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 3p 10p 17p 17p 5p 5p 11p 11p 19p 16p 16p 19p 19p 19p 19p 16p 16p 16p 16p 16p 16p 16p 15p 15p 15p 15p 15p 15p 15p
EMSN-
NXRS-
VS-
YC-
YS-
E-7000TB MS-900 N-8000EX N-8000MI N-8000MS N-8010EX N-8010MS N-8011MS N-8020MS N-8031MS N-8031SB N-8050DS N-8050SB N-8500MS N-8540DS N-CC2360 N-CC2564 N-DR2000 N-SD2000 N-VR2010 N-VT2010 NX-100 NX-100S RS-150 RS-160 RS-170 RS-180 RS-190 RS-191 VS-900AF VS-900AL VS-900CO VS-900DI VS-900MF VS-900MS VS-900RS VS-900SC VS-900TI VS-910DI VS-910RS YC-150 YC-241 YC-251 YC-280 YC-290 YC-302 YC-303 YS-13A
24p 27p 23p 23p 24p 23p 24p 24p 24p 24p 24p 24p 24p 24p 24p 21p 21p 21p 21p 21p 21p 26p 26p 27, 28p 27, 28p 27, 28p 27, 28p 27, 28p 27, 28p 27p 27p 27p 27p 27p 27p 27p 27p 27p 27p 27p 24p 24p 24p 24p 24p 27p 27p 24p
29
ST
ERED
* TOA has been granted the ISO 9001 (BS 5750) registration in the 9000 Series of Quality Assurance Standards by the International Organization for Standardization (ISO).
FI
RM
REG
30
Specifications are subject to change without notice. Printed in Japan (0609) 833-53-021-30 u