Professional Documents
Culture Documents
10
Q1) Draw the symbol and state the name of the component shown in figure.
2
Name: ………………………………... Symbol: ……………………………….
Q2)
I) – Draw the symbols of the following:
a– fixed resistor b – Variable resistor
………………………………... (0.5) ………………………………. (0.5)
2 kΩ = Ω 3.5MΩ = Ω
2
4700 Ω = KΩ 500000Ω = MΩ
Q4) Calculate the resistance value of resistors indicated by the Colour codes in the
table below.
R5 black 1Ω +20%
1
Inductor and Capacitor
10
Q1) Draw the Symbol of the following components:
1.5
1) ……………………………………………………….
2) ………………………………………………………. 2
3) ……………………………………………………….
4) ……………………………………………………….
Q5) What is the function of Capacitor.
………………………………………………………………………………………………………
……………………………………………………………………………………………………… 1.5
Q6) What is the function of inductor
………………………………………………………………………………………………………
……………………………………………………………………………………………………… 1
2
Cathode Ray Oscilloscope
10
Q1)
I) What is the meaning of C.R.O?
…………………………………………………………………………(0.5)
II) What is the abbreviation of cathode ray tube? 1.5
…………………………………………………………………………(1)
Q2) State The quantities that C.R.O can measure?
…………………………………………………………………………
1
Q3) What is the main parts of C.R.T?.
…………………………………… ……………………………………
…………………………………… ……………………………………
…………………………………… …………………………………… 2.5
Q4)
I) Peak to peak voltage can be measured by:
a) Vertical squares (Y_direction). b) Horizontal squares (X_direction).
……………………………………………………… 2
……………………………………………………… 2 cm time
………………………………………………………
1
………………………………………………………
3
Soldering & Telephone
10
………………………………………………………………….…………………………………………….
1.5
………………………………………………………………….…………………………………………….
………………………………………………………………….…………………………………………….
………………………………………………………………….…………………………………………….
………………………………………………………………….……………………………………………. 1.5
………………………………………………………………….…………………………………………….
………………………………………………………………….…………………………………………….
………………………………………………………………….……………………………………………. 1.5
………………………………………………………………….…………………………………………….
………………………………………………………………….…………………………………………….
………………………………………………………………….…………………………………………….
1.5
………………………………………………………………….…………………………………………….
………………………………………………………………….…………………………………………….
1.5
………………………………………………………………….…………………………………………….
4
Diode& Zener diode
10
Q1) State two semiconductor materials are used to manufacture diode.
1) 2) 2
Q2) Draw the symbol of the following components and label their terminals:
I I
V V
5
System approach
Q1) Name the block diagram of systems shown below.
10
Input Output Input Output
Light Indicator
(Lamp/LED)
Q4) Draw the input and out put waveform for the following system.
Input Output 2
Full-wave
rectifier
Fig (6)
Q3)
a) Draw the input and out put waveform of the following system:
Input Output
Half wave
rectifier
2
Fig (5)
b) The half wave rectifier rectifies only …………………… of ……input waveform.
6
Transistor and Integrated circuits
10
Q1) Draw the symbol of the two types of transistors and label their terminals.
2.5
Symbol
2- ………………………………………………………………….. (0.5) 1
Q3)
I) State the two types of IC groups.
1- ………………………………………………………………….. (0.5)
2- ………………………………………………………………….. (0.5)
II) State two advantages of transistors.
2
1- ………………………………………………………………….. (0.5)
2- ………………………………………………………………….. (0.5)
Q4) Draw the two types of signals and label them.
2
1- …………………………………………… 2- ……………………………………………