You are on page 1of 2

PAINT MASTER WATER BASED GLOSS

TECHNICAL DATA SHEET June 11

Product Description Application Areas

Product Features

Product Data

Paint Master Water Based Gloss Trim Paint is a new generation all Acrylic water based Semi Gloss Trim Point for those areas where traditionally, a Solvent based Gloss/Eggshell Enamel has been used (Window, Door Frames, Doors, Skirting Boards Etc} Primed Wooden/Metal Window Frames, Skirting Boards Cupboards etc Primed Cement or Metal down Pipes Previously painted substrates. Interior or Exterior This Water based Gloss is designed to replace Solvent based products. Extremely durable and UV resistant for the harsh Lowveld climate. Highly water resistant. Excellent adhesion/Flexibility Excellent, no mess application properties. Low odour. Quick drying 2 coats can be applied in one day. If correctly applied to a properly prepared substrate, the product has a life expectancy of 5-7 Years , possibly longer. The use of a special polymer not only improves Durability but also properties like block resistance and long term flexibility Self Cross Linking Acrylic resin emulsion Resin Base Touch dry: 1 hour Drying Time Hard dry: 4-6 hours 35-40 microns per coat Film Thickness 8-10 SQM per 1 litre Spreading Rate Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 7-9 square meters per litre for the first coat and 9-11 square meters per litre for subsequent coats and for when applied to sealed, previously painted substrates. Always stir well before use with a flat paddle. Brush, This Product is ready for use un-thinned; thinning with water will reduce its hiding power. Application equipment clean up is with clean tap water. Stir well before use. With brush apply a generous coat of Paint Master WB Gloss to the area that needs protecting. Allow to dry 6-8 hours before recoating. With brush apply a second generous coat. 2 Coats of this Product are used for best results. This Product is ready for use un-thinned; thinning with water will reduce its hiding power. Clean tools immediately after use with clean tap water. Do not apply before 09:00 and after 16:00 in the winter. Do not apply exterior if it looks like rain will occur with in 4-6 hours of application. Affected areas need to be cleaned back to bright metal and spot primed with Water based Metal Primer. Remove collected sand and dust from the area. Apply two coats of Paint WB Gloss

Application Details
Mixing Application Method Thinning Cleaning Application

Surface Preparation
Rusted Metal

MARTIN VOSLOO PAINTS

WB GLOSS TDS ISSUE 1 APRIL 11

Page 1 of 2

PAINT MASTER WATER BASED GLOSS


TECHNICAL DATA SHEET June 11

New Metal

Wood Uncoated cement Plaster surfaces Fibre Cement Surfaces (Uncoated, Weathered or New) Previously Painted Surfaces

Degrease surfaces with Galvanized Iron Cleaner to remove the manufacturers grease protective layer. This process is repeated until the surface is water break free. Rinse well with potable water. Prime the Clean Degreased Metal with Water Based Metal Primer Apply two coats of Paint Master WB Gloss Apply Paint Master Universal Undercoat Lightly Sand, wipe off dust Apply two coats of Paint Master WB Gloss to the Under Coated area Remove dust, foreign material, fungal and algae growth. Fill all visible cracks and seal with Paint Master Bonding Liquid Apply two coats of Paint Master WB Gloss Remove dust, foreign material, fungal and algae growth. If friable or powdery, seal with Paint Master WB Plaster Primer Apply two coats of Paint Master WB Gloss t to the primed area

Colour Range and Quantities Precautions Disclaimer

Make sure old paint coatings are firm and solid. Remove all loose, flaking and bubbling paint. Remove all dust, grease, foreign material, fungal and algae growth. Allow to dry. If then powdery or friable, seal with Paint Master WB Plaster Primer Apply two coats of Envirolast Semi Gloss Trim Paint to the primed area This Product is available in white and a large range of Pastel Colours from the Paint MasterTinting system Available in 1 litre and 5 litres. This Product is not flammable, contains no toxic substances and only low levels of VOC (EU regulations). Martin Vosloo Paints can not be held liable if the product fails due to improper surface preparation or application.

Martin Vosloo Paints


011-7083166/083-2671122 martinvosloo@mweb.co.za

MARTIN VOSLOO PAINTS

WB GLOSS TDS ISSUE 1 APRIL 11

Page 2 of 2

You might also like