Professional Documents
Culture Documents
Declaration of Quality
COPYRIGHT © SULZER PUMPS FINLAND OY
20060307 / en / N15715 / Page 1 (2) / 2.0
We certify that AHLSTARUP pump has been manufactured, tested and inspected according to the
following international standards (if no other specified requirements exist):
• EN ISO 5199:2002 Technical specifications for centrifugal pumps -- Class II
• EN 22858:1993 (ISO 2858:1975) End-suction centrifugal pumps (rating 16 bar) --
Designation, nominal duty point and dimensions (standard's range up to size 44-200)
• EN ISO 9001:2000 Quality management systems -- Requirements
2 Materials
Materials have been manufactured according to the standard specificated in order specification and
part list.
4 Hydrostatic test
All pressure containing parts (eg. casing, casing cover etc.) including their fasteners have been
hydrostatically tested with clean water at ambient temperature (15 °C minimum for carbon steel).
The hydrostatic test has been considered satisfactory when the test pressure is maintained for at
least 10 min. without visible leakage. The hydrostatic pressure is 1.5 times the design pressure.
5 Performance test
Performance test has been done according to the EN ISO 9906 grade 2.
During performance tests the pump vibration, bearing temperature and visually the shaft seal have
been checked.
AHLSTARUP Process Pumps
Declaration of Quality
COPYRIGHT © SULZER PUMPS FINLAND OY
20060307 / en / N15715 / Page 2 (2) / 2.0
6 Final inspection
A final inspection has been done so, that the scope of supply is correct and complete according to
the purchase order, including component identification, painting and preservation and technical
documentation.
Mänttä 7.3.2006
Matti Rikka
Vice President, Production