Professional Documents
Culture Documents
PRODUCT DESCRIPTION
The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Crees history of innovation in LEDs for lighting applications with wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path. XLamp XP-G LEDs are the ideal choice where for high lighting light applications output and
FEATURES
Available in white, outdoor white and 80-CRI, 85-CRI and 90-CRI white ANSI-compatible chromaticity bins Maximum drive current: 1500 mA Low thermal resistance: 6C/W Wide viewing angle: 125 Unlimited floor life at 30C/85% RH Reflow solderable - JEDEC J-STD-020C Electrically neutral thermal path RoHS and REACH-compliant UL-recognized component (E326295)
TABLE OF CONTENTS
Flux Characteristics.................... 2 Characteristics .......................... 3 Relative Spectral Power Distribution............................... 4 Relative Flux vs. Junction Temperature ......................................... 4 Electrical Characteristics ............. 5 Thermal Design ......................... 5 Relative Flux vs. Current ............ 6 Typical Spatial Distribution .......... 6 Reflow Soldering Characteristics .. 7 Notes ....................................... 8 Mechanical Dimensions .............. 9 Tape and Reel ......................... 10 Packaging ............................... 11
maximum efficacy are required, such as LED light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting.
WWW. CREE.COM/XLAMP
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300
Color
Order Code
Notes: Cree maintains a tolerance of 7% on flux and power measurements and 2 on CRI measurements. Typical CRI for Cool White and Neutral White (3,700 K - 10,000 K CCT) is 75. Typical CRI for Outdoor White (4,000 K - 5,300 K CCT) is 70. Typical CRI for Warm White (2,600 K - 3,700 K CCT) is 80. Minimum CRI for 80-CRI White is 80. Minimum CRI for 85-CRI White is 85. Minimum CRI for 90-CRI White is 90.
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
CHARACTERISTICS
Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) Temperature coefficient of voltage ESD classification (HBM per Mil-Std-883D) DC forward current Reverse voltage Forward voltage (@ 350 mA) Forward voltage (@ 700 mA) Forward voltage (@ 1000 mA) LED junction temperature mA V V V V C 3.0 3.2 3.3 150 Unit C/W degrees mV/C Minimum Typical 6 125 -2.1 Class 2 1500 5 3.75 Maximum
* The increase of maximum forward current to 1500 mA for XLamp XP-G Cool White is retroactive and applies to all XLamp XP-G Cool White LEDs produced by Cree. The increase is the result of more extensive qualification testing that was performed after the initial product launch.
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
100
80
60
20
Wavelength (nm)
80% 70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
1500
1400 1300
1200
400 300
200
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
1600 1400
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
50% 0% 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
120
100
80
60
40
20
Angle ()
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25C to Peak Temperature
Lead-Based Solder 3C/second max. 100C 150C 60-120 seconds 183C 60-150 seconds 215C 10-30 seconds 6C/second max. 6 minutes max.
Lead-Free Solder 3C/second max. 150C 200C 60-180 seconds 217C 60-150 seconds 260C 20-40 seconds 6C/second max 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Moisture Sensitivity
In testing, Cree has found XLamp XP-G LEDs to have unlimited floor life in conditions 30C / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85C / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006.
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
3.3
C
6
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 3.2 CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC.
3
REV
DESC
Re
2.3
D
2
DRAWN BY
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 SURFACE FINISH:
1.6
D. Seibel
CHECK
3.453.45 8/28/09
DATE DATE DATE TITLE
2.00
A
3.30
0.58
B. Stanton
APPROVED
.73
2.30
.50
MATERIAL
C
25.000
DRAWING NO.
2601-00005
SHEET OF
REV.
B
1 /1
3.453.45
Top View
3.3 .50 2.3 0.5
Side View
1.30 .65
0.6 3.2 2.4
Bottom View
.60 1.20 .60
.50
B
0.5
3.3
1.65
0.4
1.60
.40 .50
0.4 1.3 0.5
A
.40 .40
0.4 0.4 1.2
3.20
RECOMMENDED STENCIL PATTERN UNLESS OTHERWISE SPECIFIED (HATCHED AREA IS OPENING) DIMENSIONS ARE IN
3.30
PCB SOLDER PAD
DRAWN BY
DATE
D. Seibel
CHECK
8/28/09
DATE
MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5
APPROVED
DATE
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo marks of Cree, Inc.
6 5 4 3
FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 and XLamp are registered .XXX .25 X .5 SURFACE FINISH:
1.6
MATERIAL
trade-
1.5.1
+.3 12.0 .0
Anode Side (denoted by + and circle) User Feed Direction END START
Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.)
Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction
Cover Tape
Pocket Tape
13mm 7"
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
10
Dessicant Desiccant (inside bag) (inside bag) PACKAGING Humidity Indicator Humidity Indicator Card (inside bag) (inside bag)
Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag
Label with Cree Bin CREE Bin Code & Barcode Label # Code, Qty, Lot Label with CREE Bin Code Cree Bin & Barcode Label Code, Qty, Lot # Labelwith CustomerBin Label with Cree P/N, Qty, Lot Lot # Code, Qty, #, PO # Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO Code, Qty, Lot# #
Patent Label Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO #
Copyright 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
11