Professional Documents
Culture Documents
1. DATE (YYMMDD)
051003
Public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 222024302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503.
L05S3082
3. DODAAC
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSES. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT / PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.
4. ORIGINATOR
a. TYPED NAME (First, Middle Initial, Last)
5. CLASS OF ECP
ANDREW SCHOLL
8. ECP DESIGNATION
a. MODEL / TYPE b. CAGE CODE
I
6. JUST. CODE 7. PRIORITY
C
9. BASELINE AFFECTED
FUNCTIONAL ALLOCATED
R X
PRODUCT
Cal .50 M2 MG
d. ECP NO.
19200 AS051003
F
Rev. SCN
N/A
CAGE Code
X
Number
NO
11. SPECIFICATIONS AFFECTED CAGE Code a. SYSTEM b. DEVELOPMENT c. PRODUCT 13. TITLE OF CHANGE Specification/Document No.
SEE ATTACHMENT A
DEFINE BOLT AND BREECH LOCK HARDNESS TEST POINTS AND DATE OF MANUFACTURE MARKINGS 15. PROCURING CONTRACTING OFFICER
a. NAME (First, Middle Initial, Last) SHERYL GROSS b. CODE c. TELEPHONE NO. 4857
17. IN PRODUCTION
YES
NO
Define the hardness test points for the bolt and breech lock. Add a date of manufacture marking for the bolt and breech lock. Add a test method for the destructive test with a specified sampling method and a defined lot size. See attached NORs for details.
20. NEED FOR CHANGE
Ensure hardness requirements on bolt and breech lock drawings are met. Ensure maximum wear life of bolt and breech lock. Ensure retention of weapon headspace.
N/A
23. RETROFIT
a. RECOMMENDED ITEM EFFECTIVITY
NONE
b. SHIP / VEHICLE CLASS AFFECTED
FUTURE CONTRACTS
c. ESTIMATED KIT DELIVERY SCHEDULE
N/A
d. LOCATIONS OR SHIP / VEHICLE NUMBERS AFFECTED
N/A
24. ESTIMATED COSTS / SAVINGS UNDER CONTRACT
N/A
25. ESTIMATED NET TOTAL COSTS / SAVINGS
b. CLASS II
APPROVED DISAPPROVED
c. CLASS II
CONCUR IN CLASSIFICATION OF CHANGE DO NOT CONCUR IN CLASSIFICATION OF CHANGE
d. GOVERNMENT ACTIVITY
e. SIGNATURE
f. j.
AMSRD-AAR-AIS-CM AMSRD-AAR-AIC-F
g. APPROVAL
APPROVED DISAPPROVED
h. GOVERNMENT ACTIVITY
TIMOTHY D. KARCHER
i.
SIGNATURE
Chief, Configuration TIMOTHY D. KARCHER Management Division CHIEF, CONFIGURATION MANAGEMENT DIVISION
20060228
369/100
L05S3082
ATTACHMENT A
NOR NO. 01 02 03 04 DRAWING NO. 6528256 6147463 7161302 6147463 DESCRIPTION BOLT, ALTERNATE FEED BOLT SUBASSEMBLY LOCK, BREECH QUALITY ASSURANCE PROVISIONS CAGE CODE 19205 19205 19205 19200
1. DATE (YYYYMMDD)
20051003
Public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the date needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503.
L05S3082
3. DODAAC 6. NOR NO.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSES. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT / PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.
5. CAGE CODE
ANDREW SCHOLL
9. TITLE OF DOCUMENT
19200
7. CAGE CODE
01
8. DOCUMENT NO.
19205
6528256
11. ECP NO.
AS051003
NOR SHEET
1 of 4
ADD SHEET 8 TO PROVIDE SUGGESTED 53-59 HRC HARDNESS TEST METHOD AND PROCEDURE. UPDATE THE REVISION STATUS OF SHEETS BOX ON SHEET 1 TO INCLUDE NEW SHEET 8. CHANGE NOTE 5B (SHEET 1) FROM: LOCAL INDUCTION HARDEN ZONE A (C4 SHEET 6). DOUBLE TEMPER 1HR + 1HR, 400-450F TO ROCKWELL C53-59. TO: LOCAL INDUCTION HARDEN ZONE A (C4 SHEET 6). DOUBLE TEMPER 1HR + 1HR, 400-450F TO ROCKWELL C53-59. SHEET 8 PROVIDES A SUGGESTED TEST METHOD FOR THE ROCKWELL C 53-59 HARDENED ZONE A.
14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by this NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR c. TYPED NAME (First, Middle Initial, Last) GOVERNMENT AMSRD-AAR-AIS-CM TIMOTHY D. KARCHER d. TITLE e. SIGNATURE
TIMOTHY D. KARCHER
Chief, Configuration Management Division
15.a. ACTIVITY ACCOMPLISHING REVISION b. REVISION COMPLETED (Signature)
20060228
c. DATE SIGNED (YYMMDD)
DD 1695
ANDREW SCHOLL
US ARMY ARDEC(R) AMSRD-AAR-AIS-CMD ROCK ISLAND, IL 61299-7300 DESCRIPTION OF REVISION
01
ECP NO.
6528256 L05S3082
Change FROM:
LENGTH
Change TO:
LENGTH
REMOVED the .12 to .38 dimension and the attached Transition Zone. REMOVED the .19 2 PLACES dimension and attached note from view and add to Section W-W, sheet 6. CHANGED: *1.50 MAX dimension to *1.50 MAX LENGTH
DD 1695-2
ANDREW SCHOLL
US ARMY ARDEC(R) AMSRD-AAR-AIS-CMD ROCK ISLAND, IL 61299-7300 DESCRIPTION OF REVISION
01
ECP NO.
6528256 L05S3082
20051003
Change TO:
C4
E-8
ADDED the Transition Zone, attached note, and dimensions. ADDED .19 MIN 2 PLS dimension and attached note from View S on sheet 6. CHANGED dimension From *.750 MAX To *.750 MAX LENGTH CHANGED from .16 2 PLS TO .16 MIN 2 PLS
DD 1695-2
C-4
C-4
E-8
1. DATE (YYYYMMDD)
20051003
Public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the date needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503.
L05S3082
3. DODAAC 6. NOR NO.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSES. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT / PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.
5. CAGE CODE
ANDREW SCHOLL
9. TITLE OF DOCUMENT
19200
7. CAGE CODE
02
8. DOCUMENT NO.
19205
6147463
11. ECP NO.
AS051003
NOR SHEET
1 of 1
7. INSCRIBE PART NUMBER, MANUFACTURER'S CODE IDENT, MONTH AND YEAR OF MANUFACTURE, AND LOT NUMBER .062 +/-.010 HIGH X .005 +.015 DEEP IN AREA INDICATED, OPPOSITE SIDE. INSCRIPTION MAY BE APPLIED AT COMPONENT LEVEL.
14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by this NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR c. TYPED NAME (First, Middle Initial, Last) GOVERNMENT AMSRD-AAR-AIS-CM TIMOTHY D. KARCHER d. TITLE e. SIGNATURE
TIMOTHY D. KARCHER
Chief, Configuration Management Division
15.a. ACTIVITY ACCOMPLISHING REVISION b. REVISION COMPLETED (Signature)
20060228
c. DATE SIGNED (YYMMDD)
DD 1695
1. DATE (YYYYMMDD)
20051003
Public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the date needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503.
L05S3082
3. DODAAC 6. NOR NO.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSES. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT / PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.
5. CAGE CODE
ANDREW SCHOLL
9. TITLE OF DOCUMENT
19200
7. CAGE CODE
03
8. DOCUMENT NO.
19200
7161302
11. ECP NO.
LOCK, BREECH
12. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIES
AS051003
NOR SHEET
1 of 2
In Zone B3, delete the 125 Surface Finish In Zone C4, delete Part Number Marking Inscription Information from that view.
ADD LEFT VIEW OF BREECH LOCK WITH HARDNESS TEST POINTS AND MARKING AREA DIMENSIONS:
ROCKWELL HARDNESS TEST POINTS
SEE NOTE 7
X X X
ADD NOTE 7 AS FOLLOWS 7. MARKING NOTES: FOLLOWING DATA SHALL BE INSCRIBED .062 +/- .015 HIGH X .005 + .015 DEEP. A. PART NO. 7161302 B. MANUFACTURER'S IDENTIFICATION MARK C. MONTH AND YEAR OF MANUFACTURE (MM/YYYY)
14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by this NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR c. TYPED NAME (First, Middle Initial, Last) GOVERNMENT AMSRD-AAR-AIS-CM TIMOTHY D. KARCHER d. TITLE e. SIGNATURE
TIMOTHY D. KARCHER
Chief, Configuration Management Division
15.a. ACTIVITY ACCOMPLISHING REVISION b. REVISION COMPLETED (Signature)
20060228
c. DATE SIGNED (YYMMDD)
DD 1695
ANDREW SCHOLL
US ARMY ARDEC(R) AMSRD-AAR-AIS-CMD ROCK ISLAND, IL 61299-7300
03
ECP NO.
7161302 L05S3082
FROM: HEAT TREATMENT: HEAT AT 1500-1575F. OIL QUENCH. TEMPER 1 HOUR MINIMUM TO HARDNESS SPECIFIED. NO DECARBURIZATION ALLOWED. TO: HEAT TREATMENT: HEAT AT 1500-1575F. OIL QUENCH. TEMPER 1 HOUR MINIMUM TO HARDNESS SPECIFIED. NO DECARBURIZATION ALLOWED. ENSURE ROCKWELL HARDNESS TEST POINTS ARE NOT CLOSE TO EDGES.
DD 1695-2
1. DATE (YYYYMMDD)
20051003
Public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the date needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503.
L05S3082
3. DODAAC 6. NOR NO.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO EITHER OF THESE ADDRESSES. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT / PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM.
5. CAGE CODE
ANDREW SCHOLL
9. TITLE OF DOCUMENT
19200
7. CAGE CODE
04
8. DOCUMENT NO.
19200
6147463
11. ECP NO.
AS051003
NOR SHEET
1 of 1
CHANGE INSPECTION B: BOLT, ALTERNATE FEED, 6528256 CHANGE FROM MAJOR Characteristic 125. 53-59 HRC HARDNESS TO: MAJOR Characteristic 125. ZONE A 53-59 HRC HARDNESS (Special Sampling Plan per Drawing 6528256, Sheet 8) ADD: CRITICAL Characteristic 101. 53-59 HRC SURFACE HARDNESS.
14. THIS SECTION FOR GOVERNMENT USE ONLY a. (X one) X (1) Existing document supplemented by this NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR c. TYPED NAME (First, Middle Initial, Last) GOVERNMENT AMSRD-AAR-AIS-CM TIMOTHY D. KARCHER d. TITLE
e. SIGNATURE
20060228
b. REVISION COMPLETED (Signature) c. DATE SIGNED (YYMMDD)
DD 1695