Professional Documents
Culture Documents
PS 30 / PS 35 Ferrodetectors
Applications Glazing, windows and storefronts Racking and shelving Ledgers Inside railing Seismic braces Formwork and tilt-up braces Sill plates Perimeter walls
Drill. Drive. Done. KWIK HUS and KWIK HUS-EZ Screw Anchors
KWIK HUS and KWIK HUS-EZ take screw anchor technology to the next level. Experience the ease and speed of setting, superior load values, and comprehensive approvals that are unique to Hilti. The KWIK HUS anchor line is the direct result of decades of jobsite experience combined with the most sophisticated research and development in the industry.
Quick and easy to install, with no Optimized thread design for best
torque wrench required in-class setting performance and superior load values For use with standard ANSItolerance drill bit; no matched tolerance drill bits are required KWIK HUS-EZ 1/4" to 3/4": ICC-ES for cracked and uncracked concrete, lightweight concrete over metal deck, and in seismic conditions ICC-ES for grout-filled CMU pending Technical data for KWIK HUS in concrete available in accordance with AC 193, appendix D IBC 2003, 2006 and 2009 compliant Fully-removable anchoring solution Suitable for reduced edge distances and spacing Attractive head with integrated washer and clear indication of length and size
KWIK HUS-EZ KWIK HUS-EZ offers one solution for every zone: cracked concrete, uncracked concrete, concrete over metal deck and grout-filled CMU blocks in seismic and nonseismic zones. KWIK HUS-EZ is a reliable, easy-to-set and fully-removable fastening solution developed to fulfill all your needs with a comprehensive cracked concrete and seismic ICC-ES approved portfolio from 1/4" to 3/4" and an ICC-ES approval pending for grout filled CMU blocks. With the launch of the KWIK HUS-EZ, Hilti introduces the only 1/4" anchor with a ICC-ES approval in cracked concrete.
KWIK HUS KWIK HUS offers you speed and ease of installation in a fully-removable screw anchor solution. With published technical data evaluated to AC 193 and an ICC-ES report for grout-filled CMU blocks pending, the KWIK HUS drives productivity while offering the approvals you need to get the job done.
KH-EZ 1/4" x 2-5/8" KH-EZ 1/4" x 3" KH-EZ 1/4" x 3-1/2" KH-EZ 3/8" x 3" KH-EZ 3/8" x 3-1/2" KH-EZ 3/8" x 4" KH-EZ 3/8" x 5" KH-EZ 1/2" x 2-1/2" KH-EZ 1/2" x 3-1/2" KH-EZ 1/2" x 4" KH-EZ 1/2" x 4-1/2" KH-EZ 1/2" x 6" KH-EZ 5/8" x 4" KH-EZ 5/8" x 5-1/2" KH-EZ 5/8" x 6-1/2" KH-EZ 3/4" x 4-1/2" KH-EZ 3/4" x 5-1/2" KH-EZ 3/4" x 7" KH-EZ 3/4" x 9"
00418045 00418046 00418047 00418057 00418058 00418059 00418061 00418070 00418072 00418073 00418075 00418077 00418079 00418080 00418081 00418083 00418084 00418085 00418087
KWIK HUS
Description Hole Diameter 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 3/4" Total Length without Anchor Head 2-1/8" 3" 3-1/2" 4" 3" 4" 4-1/2" 5" 6" 4" 5-1/2" 4-1/2" 5-1/2" 7" Minimum Embedment Depth 1-5/8" 2-1/2" 2-1/2" 3-1/4" 2-1/4" 3" 4-1/4" 4-1/4" 4-1/4" 3-1/4" 5" 4" 4" 6-1/4" Qty (pcs) Box 50 50 50 50 30 25 25 25 25 15 15 10 10 10 Item No.
KH 3/8" x 2-1/8" KH 3/8" x 3" KH 3/8" x 3-1/2" KH 3/8" x 4" KH 1/2" x 3" KH 1/2" x 4" KH 1/2" x 4-1/2" KH 1/2" x 5" KH 1/2" x 6" KH 5/8" x 4" KH 5/8" x 5-1/2" KH 3/4" x 4-1/2" KH 3/4" x 5-1/2" KH 3/4" x 7"
00434436 00434437 00434438 00434439 00434441 00434443 00434444 00434445 00434446 00434447 00434448 00434450 00434451 00434452
Only Hilti has everything you need to get the job done TE 4-A18 Cordless Rotary Hammer Drill, TE-CX Drill Bits, SIW 18T-A Cordless High Torque Impact Wrench, HUS Anchors and sockets
Note: More sizes available than shown in this publication. Please check our 2011 catalog or Hilti Online: www.us.hilti.com or www.hilti.ca
PS 30 / PS 35 Ferrodetectors
Applications PS 30 Applications Locate rebar, copper or EMT in concrete Locate copper or EMT in brick walls PS 35 Applications Locate rebar, copper or EMT in concrete, CMU, or brick Locate copper or EMT in brick walls Determine the position and depth of existing rebar for post-installed rebar connections Check concrete cover over reinforcement for trouble-free anchor setting Outperform and Outlast
Easy-to-read red and green LED Single button operation Durable rubber casing, designed to
withstand tough jobsite conditions Unrivaled accuracy indicator lights
FLEET MANAGEMENT
Order Information
Description PS 30 Ferrodetector PS 35 Ferrodetector Package Contents Includes tool, hand strap, pouch, 2 markers, (4) AAA batteries and operating instructions in cardboard box Includes tool, hand strap, pouch, 2 markers, (4) AAA batteries and operating instructions in an impactresistant plastic tool box Item No. 00407920 00407960
Technical Data
Accuracy Max. depth (in) for rebar detection Max. depth (in) for non-ferrous metal detection (e.g. copper, aluminium) Protection class Battery life Operating temperature Dimensions (L x W x H) Weight (incl. batteries)
PS 30
3/8 in (10 mm) 4-3/4 in at > #3 rebar diameter (120 mm) 3 in (80 mm)
PS 35
3/8 in (10 mm) 4-3/4 in at > #3 rebar diameter (120 mm) 3 in (80 mm)
Rugged and reliable lasers. PMP 45 Plumb and Square Laser, PML 42 Line Laser and PMP 42 Plumb Laser
With one-button tool operation and Pulse Power technology, the latest Hilti lasers drive productivity and maximize versatility. Hiltis innovative Impact Protection System provides assurance that your PML 42, PMP 42 and PMP 45 lasers will outperform even under the toughest jobsite conditions. And since Hilti offers the industrys best service, including laser calibration, you can be confident that your Hilti laser is both rugged and reliable.
Outperform PMP 42 and PMP 45: ideal shape and brightness of beam provides maximum visibility PMP 42 and PMP 45: fixed foot with integrated magnets attach to drywall tracks Hilti calibration service for highest tool accuracy PMP 45: five laser beams for maximum versatility PML 42 / PMP 42: two laser beams for ease of use PML 42 / PMP 42: small, pocket-sized design ideal for use in tight spots PML 42: brightest beam on the market for maximum visibility Outlast
Rugged housing for greater Impact Protection System helps Order Information
Description PMP 45 Plumb and Square Laser PMP 42 Plumb Laser PML 42 Line Laser Package Contents Includes: tool, removable foot, pouch, (4 ) AA batteries and operating instructions in a cardboard box Includes: tool, pouch, (4 ) AA batteries and operating instructions in a cardboard box Includes: tool, pouch, (4 ) AA batteries and operating instructions in a cardboard box Item No. 00411281 00411282 00411283
durability
protect the core of the tool and maximizes durability; laser module protected 100% of the time Supported by Hilti Lifetime Service which includes 2 year No Cost Coverage
Technical Data
Laser functions Self-leveling range Dimensions (L x W x H) Weight Battery type Operating time with alkaline battery IP protection class (except battery compartment) Laser class Measuring distance Accuracy at 30 (10m) Self-leveling time Operating temperature range
PMP 45
Transferring vertical and horizontal points, plumbing, and squaring 5 4-1/5" x 2-1/2" x 3-3/4" (107mm x 65mm x 96mm) 14.56 ounces (413 grams) Alkaline 30 h IP 54 Class II Min / max 3' (1m)/100 (30m) 1/8 (3mm) <3 sec 14 F to + 122 F (10 C to + 50 C)
PMP 42
Transferring points 5 4-1/5" x 2-1/2" x 3-3/4" (107mm x 65mm x 96mm) 15.16 ounces (430 grams) Alkaline 50 h IP 54 Class II Min / max 3' (1m)/100 (30m) 1/8 (3mm) <3 sec 14 F to + 122 F (10 C to + 50 C)
PML 42
Leveling and aligning 5 4-1/5" x 2-1/2" x 3-3/4" (107mm x 65mm x 96mm) 15.16 ounces (430 grams) Alkaline 30 h IP 54 Class II Min / max 3' (1m)/100 (30m) 1/8 (3mm) <3 sec 14 F to + 122 F (10 C to + 50 C)
Applications Documented barrier integrity for occupant safety Outperform and Outlast Support compliance with code required life safety inspections Barrier database can be maintained and expanded throughout the life of facilities Integrated permitting process including photo documentation Accessible from any web-enabled device Accessible by multiple designated users
Order Information
Description Firestop Installation Tracking Software initial set up Quantity 1 Item No. 03470420
Outperform Round openings can be created via hole saws or core bits Spin on flanges promote fast product installation Cables do not need to be inserted in a uniform height to comply with the firestop detail Opening and closing the device is easy Constrictive smoke seal limits smoke migration Outlasts Robust smoke seal fabric tested to 250 open-close cycles
Technical Data
OD (device only) OD (flange) ID Total length Weight (device and flanges) Temperature resistance Intumescent activation Expansion ratio (unrestricted) Metal Plastic Fabric Approvals California State Fire Marshall City of New York Tested in accordance with:
2"
2.3" 4.7" 1.7" 12.4" 1.5 lbs 22F to 212F (-30C to 100C) Approx. 320F (160C) 1:40 Steel with zinc coating ABS Glass-fiber
4"
4.3" 6.7" 3.7" 12.4" 2.6 lbs 22F to 212F (-30C to 100C) Approx. 320F (160C) 1:40 Steel with zinc coating ABS Glass-fiber
Applications Repetitive anchor hole drilling in all directions in concrete and masonry. Overall drilling range 3/16" 3/4". Optimum drilling range 1/4" 5/8" Occasional drilling in wood, steel and plastics using optional chuck adapter Outperform
Best-in-class performance-to
weight ratio, ideal for drilling in all directions Efficient hammering mechanism for superior drilling performance up to 5/8 diameter Corded drilling performance in cordless tool High battery capacity drills more holes per battery charge than other cordless rotary hammers in the same class Superior working comfort due to Active Vibration Reduction (AVR) Virtually dustless drilling with the new TE DRS-6A dust removal accessory Perfectly matched with Hilti TE-C drill bits to provide accurate anchor holes
FLEET MANAGEMENT
*Some limitations apply. Contact Hilti for details.
Order Information
Description TE 6-A36 AVR Performance Package TE 6-A36 AVR Trade Package
Package Contents Includes tool, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger in an impact-resistant plastic tool box, plus the following TE-C3X drill bits: (1) 3/8" x 6", (1) 5/8" x 6" and (2) 1/2" x 6" Includes tool, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger in an impact-resistant plastic tool box, plus (1) TE-C3X Performance Bit Pack (3/16" x 6", 1/4" x 6", 5-16" x 6", 3/8" x 6", 1/2" x 6" and 5/8" x 8") Includes tool, TE DRS-6-A dust removal system, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger in an impact-resistant plastic tool box, plus the following TE-C3X drill bits: (1) 3/8" x 6", (1) 5/8" x 6" and (2) 1/2" x 6" Includes (1) TE 6-A36-AVR Cordless Hammer Drill, (1) WSR 18-A 18 V Reciprocating Saw, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger and (1) small Hilti tool bag, plus the following TE-C3X drill bits: (1) 3/8" x 6", (1) 5/8" x 6" and (2) 1/2" x 6"
03471837
Outlast
03471838
High efficiency motor for longer life CPC battery technology helps
protect the battery, switch and motor for increased durability Robust battery cells for longer battery life Supported by Hilti Lifetime Service which includes 2-year NoCost Coverage
TE 6-A36-AVR and WSR 36-A 36V Combo
03471839
Technical Data
Rated voltage Hammering speed under no load Drilling speed Single impact energy Drilling range Optimum drilling range Dimensions (L x W x H) Weight Battery capacity
TE 6-A36-AVR
36 V Li-Ion 5283 blows/min 1040 rpm 1.5 ft-lb 3/16" 3/4" 1/4" 5/8" 13.5" x 3.7" x 8.5" 8.8 lbs 3.0 Ah
Applications
Optimal performance-to-weight
designed for superior drilling performance up to 5/8 Perfectly matched with Hilti TE-CX drill bits to provide accurate anchor holes Outlast
FLEET MANAGEMENT
High efficiency motor for longer life Supported by Hilti Lifetime Service
which includes 2 year No-Cost Coverage
Order Information
Description TE 7 Performance Package TE 7 Grounded Performance Package TE 7 + DRS Performance Package Package Contents Includes tool in an impact resistant plastic tool box plus the following TE-C3X drill bits: (1) 1/4" x 6", (1) 3/8" x 6" and (2) 1/2" x 6" Includes tool in an impact resistant plastic tool box plus the following TE-C3X drill bits: (1) 1/4" x 6", (1) 3/8" x 6" and (2) 1/2" x 6" Includes tool, dust removal system (DRS) in an impact resistant plastic tool box plus the following TE-C3X drill bits: (1) 1/4" x 6", (1) 3/8" x 6" and (2) 1/2" x 6" Includes tool in an impact resistant plastic tool box and (1) TE-C3X Performance Bit Pack (3/16" x 6", 1/4" x 6", 5-16" x 6", 3/8" x 6", 1/2" x 6" and 5/8" x 8") Item No. 03471571
03471572
03471833
TE 7 Trade Pack
03471834
Technical Data
Rated input Hammer speed under no load Drilling speed Single impact energy Drilling range Optimum range Dimensions (L x W x H) Weight
TE 7
710 W 4980 blows/min 1050 rpm 1.33 ft-lb 3/16" - 1" 1/4" -5/8" 12.6" x 3" x 8.5" 6.4 lbs
Applications TE-YX Optimal for drilling in reinforced concrete Hammer drilling in concrete, reinforced concrete, masonry, and other natural materials Drilling anchor holes and doweling for structural work Penetrations for pipes, gas lines, conduits, and cables TE-Y Optimal for drilling in nonreinforced concrete Hammer drilling in concrete, reinforced concrete when rebar can be avoided, masonry, and natural stone Drilling anchor holes and doweling for structural work Penetrations for pipes, gas lines, conduits, and cables
Faster drilling with more durability. TE-YX and TE-Y Hammer Drill Bits
Hilti takes carbide hammer drill bits to the next level by radically improving our bestin-class TE-YX bits and introducing a completely new line of TE-Y bits. With a symmetrical full carbide head, the new TE-YX can take the punishment of repetitive rebar hits. With a newly designed fluting system, the TE-YX also removes dust quicker than ever and reduces the weight of the bit. This means your Hilti combihammer works even more efficiently and productively. If you dont expect to hit rebar, our new TE-Y line offers unparalleled drilling speed. With a contoured head and carbide blade, the TE-Y drill bit is designed to slice through concrete and get dust from the hole to the surface as quickly as possible. With these two new innovations, Hilti is putting the key to drilling productivity in your hands. TE-YX Hammer Drill Bit
Wear marks indicate anchor hole tolerance and drill bit warranty for easy replacement Full symmetrical carbide head reduces jamming on rebar Triple fluted helical for better dust removal and faster drilling
Convex connection end for optimal transfer of higher impact energies of Hilti combihammers
Contoured head and carbide blade allow immediate dust transfer from the hole to the flutes in hard and soft base materials such as concrete, CMU, limestone, and granite Rugged carbide blade placement allows for long bit life in materials without rebar
Steep flutes allow for better dust transportation and faster drilling
X-FS Formstop
Applications Position and alignment of concrete wall form panels Column positioning Outperform Four to five times faster installation than traditional drilling methods Easy installation using the DX 460 or DX 36 Powder-Actuated Tools Suitable for dynamic and static loads X-FS tophat design compensates for overdrive due to various base material hardness Outlast Polyethylene plastic will not corrode after concrete is poured Ribbed surface bonds well with concrete Top portion tapers inward to reduce overall stress on the X-FS body from panel impact and when concrete is poured High impact plastic withstands low temperatures
Order Information
Description X-FS C 52 Formstop device with pre-mounted X-C 52 (2" fastener). X-FS MX Formstop device without pre-mounted nail. For use with DX 460-MX 72 magazine tool for maximized productivity. X-FS C 52 Formstop Combo 1000 fasteners and cartridges DX 460-F8 Formstop (1K) Package Includes DX 460 tool and 1000 fasteners and cartridges DX 460-F8 Formstop (5K) Package Includes DX 460 tool and 5000 fasteners and cartridges DX 460-MX Formstop and X-CT Package* Includes DX 460-MX tool, 1000 X-FS MX Formstop, 1000 X-C 52 MX and 1000 X-CT 62 MX fasteners and cartridges X-FS MX Includes 1000 X-FS MX Formstop and 1000 X-C 52 MX fasteners and cartridges Qty 100 100 Item No. 00407346 00408022
03467566
Technical Data
Fastener length Formstop material
X-FS
2" (X-C 52) Polyethylene
*X-CT fastener is a unique, break away nail designed for formwork applications facilitating the simple installation and removal of 2x4 kicker plates.
11
Abrasives
Applications Cutting angle irons, pipes, rebar, metal stud, stock Grinding welds, beveling, deburing Cutting and notching: cleaning root pass, pipeline welds, light grinding Surface finishing, blending, grinding irregular shapes Serial cutting of rebar, studs, steel beams and rails Outperform Contaminant-free abrasives allow cutting in metal and stainless steel Consistent performance due to computer controlled abrasive grit size distribution Fast and precise start up thanks to multi-layers of fiber glass mesh Outlast Dense bond structure provides higher resistance against breakage Self-sharpening effect provides longer wheel life Rigorous quality control
Order Information
Cutting Abrasives Cut-off wheel 4-1/2" Cut-off wheel 6" Chop saw blade 12" Chop saw blade 14" Diameter 4.5" 6" 12" 14" Thickness 0.045" 0.045" 3/32" 3/32" Arbor 7/8" 7/8" 1" 1" Type 1 1 1 1 Pack qty 25 25 10 10 Item No. SP: 00436655 UP: 00436656 SP: 00436659 UP: 00436660 SP: 00436730 UP: 00436731 SP: 00436732 UP: 00436733 Item No. SP: 00436691 UP: 00436692 SP: 00436697 UP: 00436698 Item No.
Grinding Abrasives Grinding wheel 4-1/2" Grinding wheel 7" Grinding Abrasives with hub Grinding wheel 4-1/2" with hub Grinding wheel 7" with hub Finishing Abrasives
Type 27 27 Type
4.5" 7"
1/4" 1/4"
7/8" 7/8"
(hub) (hub)
27
SP: 00436701 UP: 00436702 SP: 00436707 UP: 00436708 Item No.
27
Diameter
Thickness
Arbor
Type
Pack qty 10 10
Flap disc 4-1/2" with hub Flap disc 5" with hub
4.5" 5"
G60 G60
5/8"11 5/8"11
(hub) (hub)
27
27
Hilti Online
www.facebook.com/HiltiNorthAmerica
www.youtube.com/HiltiNorthAmerica
Lifetime Service
Limitations
No-Cost Coverage excludes damage due to abuse, or use not in accordance with the tool operators manual. Lifetime Manufacturers Warranty and Lifetime Repair Cost Limit offered as long as replacement parts remain available. Refurbished batteries may be used as a no cost replacement part. * Pistons, spring clips and buffers for powder-actuated fastening tools are excluded from the no-cost wear and tear coverage.
Plus
An extended 6 month no cost period for tools with an initial 2 year No-Cost Coverage period, and 3 months for tools with an initial 1 year No-Cost cCoverage period No cost inbound shipping No cost calibration with laser tool repairs
2 Years
NO COSTS Lifetime
MANUFACTURERS
When a tool goes down, Hilti understands your need to get it back on the job quickly. That is why we strive to repair and return your tool in 5 working days or less.
WARRANTY
The process is simple: 1. Call Hilti Customer Service (U.S. 1-800-879-8000, Canada 1-800-363-4458, 2. Answer a few simple questions and your shipping documents/label will be faxed 3. Package your tool for shipping, your shipping documents/label, the box and
give the packaged tool to your delivery person or drop it off at the nearest shipping location. Shipping methods vary depending upon region. or emailed to you within minutes. Guam 1-671-646-0930, Puerto Rico 1-787-936-7060).
Fixed Monthly Costs No money upfront, while avoiding unexpected repair and replacement costs No-Cost Repairs Fast, quality repairs, free of charge for the entire period of use
Labeling and Tracking Personalized tools with total online transparency Timely Exchange Keeps you equipped with up-to-date tools for top productivity and safety Theft Coverage Reduces financial risk and makes replacement of tools easy in case of theft Loan Service* Loaner tools minimize downtime in the event of repairs
Contact your Hilti Account Manager today for a personalized Tool Fleet Management presentation or call toll free to schedule an appointment.
*Available for select tool models. Coming soon in Canada