Professional Documents
Culture Documents
Related catalogs
Additional documentation
SINAMICS G110/SINAMICS G120 D 11.1
Inverter Chassis Units You will find all information material, such as brochures, catalogs,
SINAMICS G120D manuals and operating instructions for standard drive systems
Distributed Frequency Inverters up-to-date on the Internet at the address
Order No.: http://www.siemens.com/micromaster/printmaterial
German: E86060-K5511-A111-A4
English: E86060-K5511-A111-A4-7600 You can order the listed documentation or download it in common
file formats (PDF, ZIP).
SINAMICS G130 D 11
Drive Converter Chassis Units Catalog CA 01 – Selection tool SD configurator
SINAMICS G150 The selection tool SD configurator is available in combination with
Drive Converter Cabinet Units the electronic catalog CA 01.
Order No.:
German: E86060-K5511-A101-A3
English: E86060-K5511-A101-A3-7600
MICROMASTER/COMBIMASTER DA 51.3
MICROMASTER 411 Inverters
COMBIMASTER 411
Distributed Drive Solutions
Order No.:
German: E86060-K5251-A131-A2
English: E86060-K5251-A131-A2-7600
Industrial Communication IK PI
for Automation and Drives
Part 6: ET 200 Distributed I/O
ET 200S FC Frequency Converter On CD 2 for the selection and configuring tools, you will find the
Order No.: SD configurators for low-voltage motors, MICROMASTER 4 inverters,
German: E86060-K6710-A101-B5 SINAMICS G110 and SINAMICS G120 inverter chassis units as well
English: E86060-K6710-A101-B5-7600 as SINAMICS G120D distributed frequency inverters and SIMATIC
ET 200S FC frequency converters for distributed I/O, complete with:
• Dimension drawing generator for motors
Low-Voltage Motors D 81.1
IEC Squirrel-Cage Motors • Data sheet generator for motors and inverters
Frame sizes 56 to 450 • Starting calculation
• 3D models in STP format
Order No.:
German: E86060-K5581-A111-A2 • Extensive documentation
English: E86060-K5581-A111-A2-7600 Hardware and software requirements
• PC with 500 MHz CPU or faster
Low-Voltage Motors D 81.1 • Operating systems
IEC Squirrel-Cage Motors News – Windows 98/ME
New Generation 1LE1 – Windows 2000
Frame size 100 to 160 – Windows XP
Order No.: – Windows NT 4.0
German: E86060-K5581-A121-A2 (Service Pack 6 or higher)
English: E86060-K5581-A121-A2-7600
• 256 MB work memory (minimum)
• Screen resolution 1024 x 768, graphic with more than 256 colors,
AC NEMA & IEC Motors D 81.2 small fonts
Further details available on the U.S./ • 150 MB spare hard disk space (after installation)
Internet at: Canada
• CD-ROM drive
• Windows-compatible sound card
http://www.sea.siemens.com/motors • Windows-compatible mouse
Installation
MOTOX D 87.1 You can install this catalog directly from the CD-ROM as a partial
Geared Motors version or full version on your hard disk or in the network.
Order No.:
German: E86060-K5287-A111-A1
English: Catalog available soon
Catalog CA 01 CA 01
The Offline Mall of Automation and Drives
Order No.:
CD: E86060-D4001-A100-C6 (Germ.)
CD: E86060-D4001-A110-C6-7600 (Engl.)
DVD: E86060-D4001-A500-C6 (Germ.)
DVD: E86060-D4001-A510-C6-7600 (Engl.)
A&D Mall
Internet:
http://www.siemens.com/automation/mall
© Siemens AG 2007
420/430/440 0
Inverters
0.12 kW to 250 kW
Catalog DA 51.2
2007/2008 MICROMASTER Overview
Supersedes:
Catalog DA 51.2 · 2005/2006
1
The products in this catalog are also included
in the electronic catalog CA 01.
Order No.:
E86060-D4001-A110-C6-7600 (CD-ROM)
E86060-D4001-A510-C6-7600 (DVD) MICROMASTER 420 0.12 kW to 11 kW
Contact your local Siemens representative “The universal”
for further information
© Siemens AG 2007
2
3
The products and sys-
tems described in this
catalog are manufac-
tured/distributed under
application of a certified
quality management
system in accordance MICROMASTER 440 0.12 kW to 250 kW
with DIN EN ISO 9001
“The all-purpose”
(Certified Registration
No. DE-000357 QM)
and DIN EN ISO 14001
(Certified Registration
No. 0813420 UM and
EMS 57390). The cer-
4
tificate is recognized by
all IQNet countries.
Appendix
s A
© Siemens AG 2007
Ethernet
Management Level
MES Manufacturing Execution Systems
Ethernet
SINUMERIK SIMOTION
Computer Numeric Control Motion Control System
PROFINET
Field Level
Industrial Ethernet
Totally HART
Integrated
Automation
SIMATIC IT
SIMATIC WinCC
SCADA System
Totally
Integrated
Power
KNX/EIB
GAMMA instabus
Inverter
MICROMASTER
1/2 Selection guide
1/4 Options
Overview
■ Selection guide
Section 2
1/2 Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 420/430/440
Overview
Section 3 Section 4
Siemens DA 51.2 · 2007/2008 1/3
© Siemens AG 2007
MICROMASTER 420/430/440
Overview
■ Options
Various options are available Assignment of operator panels and modules to the inverter ranges
for the MICROMASTER
inverters: Options Order No. MICROMASTER
410 1) 420 430 440
■ Filters
■ Chokes Operator panels
■ Operator panels OP 1) 6SE6400-0SP00-0AA0 %
■ PROFIBUS module BOP 6SE6400-0BP00-0AA0 % %
■ DeviceNet module
1 ■ CANopen module
BOP-2
AOP
6SE6400-0BE00-0AA0
6SE6400-0AP00-0AA1 %
%
%
■ Pulse encoder evaluation AAOP 6SE6400-0AP00-0AB0 % %
module CAOP 6SE6400-0AP00-0CA0 % %
■ Gland plates
Modules
■ Mounting kits, etc.
PROFIBUS 6SE6400-1PB00-0AA0 % % %
1) The MICROMASTER 410 is no DeviceNet 6SE6400-1DN00-0AA0 % % %
longer available. The model
will be discontinued as of CANopen 6SE6400-1CB00-0AA0 % % %
October 1, 2007. The Pulse encoder evaluation 6SE6400-0EN00-0AA0 % %
MICROMASTER 410 can then
only be ordered as a spare Maximum possible configuration: % Possible assignment
One pulse encoder evaluation module
part.
+ one communication module + one operator panel
Operator panels
Modules
Inverter
MICROMASTER 430
3/2 Description
3/10 Options
MICROMASTER 430
Description
MICROMASTER 430
Description
MICROMASTER 430
Circuit diagrams
PE
3 AC 380 - 480 V
SI
PE L/L1, N/L2,
+ 10 V
1 L3
or
0V
2 L1, L2, L3
ADC1+
≥ 4,7 k Ω AA/
3 BOP link
ADC1- DD
4
ADC2+ RS232
AA/
10 150.00
ADC2- DD
24 V external 11
BOP-2
DIN1 DIN1
5 5
DIN2 DIN2 ~
~
6 6
Opto isolation
DIN3 DIN3 ==
7 7
DIN4 DIN4 Frame sizes
8 8 C to F B+/DC+
DIN5 DIN5 DC-
16 16
DIN6 DIN6
+ 17 17 Output +24 V
PNP max. 100 mA
_ 24 V or 9 (isolated)
NPN Output 0 V Terminals only
max. 100 mA for measuring
28 28 (isolated) Frame sizes DCNA purposes
PTCA FX and GX
Motor DCPA
14 A
PTC/
PTCB D
KTY 84
3 15
DAC1+
CPU DCNS
DCPS
0 - 20 mA D
12
max. 500 DAC1- A
13 =
DAC2+
0 - 20 mA 26 D 3 ~
max. 500 DAC2- A
27
COM
20 NO Not 60 Hz
Relay 1 used 50 Hz
19 NC
1 2
18 DIP switch
(on control board)
COM
30 V DC/5 A (resistive load)
Relay 2 22 NO
250 V AC/2 A (inductive load)
21
ADC ADC
0 - 20 mA 1 2 DIP
COM current switch
25 NO 0 - 10 V (on I/O
Relay 3 voltage board)
24 NC 1 2
23
G_DA51_EN _00012
P+
29 RS485 COM link
N-
30
PE U, V, W
CB automatic M
option
MICROMASTER 430
Circuit diagrams
View A
Mains connections
Motor connections
View A
AIN1 AIN2 RL1-A RL1-B RL1-C RL2-B RL2-C RL3-A RL3-B RL3-C
G_DA51_EN_05107
S1 S2
18 19 20 21 22 23 24 25
DIP Switches:
0 mA to 20 mA
or Output relay contacts
0 V to 10 V
3
DAC1+ DAC1- PTC PTC DIN5 DIN6 DAC2+ DAC2- PE P+ N-
A B 0V
12 13 14 18
15 16 17 26 27 28 29 30
NPN *)
+10 V 0V ADC1+ ADC1- DIN1 DIN2 DIN3 DIN4 +24 V ADC2+ ADC2-
(DIN7) (DIN8)
1 2 3 4 5 6 7 8 9 10 11
PNP *)
MICROMASTER 430
Technical data
MICROMASTER 430
Technical data
■ Derating data
Pulse frequency
Operating temperature
100 1 0 0
Rated output current
R a te d o u tp u t c u rre n t
% 8 5
80 8 0
70 %
60 6 0
40 4 0
20 2 0 3
0 0
-10 0 10 20 30 40 °C 50 0 1 0 2 0 3 0 4 0 4 5 °C 5 5
Operating temperature O p e r a tin g te m p e r a tu r e
MICROMASTER 430
Technical data
100 100
Rated output current
40 40
20 20
0 0
0 1000 2000 3000 m 4000 0 1000 2000 3000 m 4000
Operational altitude Operational altitude
100 100
Mains voltage
Mains voltage
% %
80 80
77 77
60 60
40 40
20 20
0 0
0 1000 2000 3000 m 4000 0 1000 2000 3000 m 4000
Operational altitude Operational altitude
MICROMASTER 430
1) Supplementary conditions: 2) Supplementary conditions: 3) Use of MICROMASTER invert- 4) Acc. to EMC EN 61800-3 gen-
Input current at rated operating Input current at rated operating ers with internal filter is not per- erally suited to heavy industrial
point, applicable at short-cir- point, applicable at short-cir- missible on non-grounded applications. For details please
cuit voltage of the supply cuit voltage of the supply mains supplies. refer to Appendix on page A/4.
USC = 2 % with reference to the USC ⱖ 2.33 % with reference to
inverter rated power and rated the inverter rated power and
mains operating voltage of rated mains voltage of 400 V.
400 V without a line commutat-
ing choke.
MICROMASTER 430
Options
Variant dependent options
■ Overview
EMC filter, Class A The requirements are fulfilled LC filter and sinusoidal filter The LC filters/sinusoidal filters
using shielded cables with a can be used for all MICRO-
All 7.5 kW to 90 kW inverters The LC filter/sinusoidal filter
max. length of 25 m to 50 m MASTER 430 inverters of
are supplied with an internal limits the rate of rise of voltage
(depending on the type, de- frame sizes C to GX.
filter Class A. and the capacitive charge/
tails on request).
For inverters 110 kW to discharge currents which usu- • Frame sizes D to F:
250 kW, EMC filters Class A With this filter, the inverter ally occur with inverter opera- The LC filters, frame sizes D
are available. In this perfor- complies with the emission tion. This means that much to F, are designed for
mance range, the EMC filters standard EN 55 011, Class B longer shielded motor cables mounting upright in the con-
are only permitted to be used for conducted interference are possible when using LC trol cabinet. Due to leakage
in combination with a line emissions. filters/sinusoidal filters and the flux lines caused by physical
commutating choke. service life of the motor sources, a minimum dis-
Leakage currents:
achieves values similar to tance of 50 mm to adjacent
The requirements are fulfilled
The leakage currents of the in- those with direct mains opera- modules and metal parts is
using shielded cables with a
verters with/without filter (inter- tion. Use of an output choke recommended.
max. length of 25 m.
nal/external) may exceed isn’t required with that.
• Frame sizes FX and GX:
30 mA. Typical values in prac-
EMC filter, Class B Please note when using The sinusoidal filters, frame
tice are between 10 mA and
LC filters/sinusoidal filters: sizes FX and GX, are de-
Available for inverters 7.5 kW 50 mA. The exact values de-
signed for mounting upright
to 15 kW with an internal Class pend on the design, environ- • Only V/f, FCC control per-
in the control cabinet. Due to
A EMC filter. ment and cable lengths. Inter- missible
leakage flux lines caused by
ference-free operation with • Please observe the derating
The requirements are fulfilled physical sources, a mini-
residual current operated de- of 15 % when selecting the
using shielded cables with a mum distance of 100 mm to
vices with a trigger value of appropriate inverter
max. length of 25 m. adjacent modules and metal
30 mA cannot be guaranteed. • Operation only permissible
parts is recommended.
For inverters 18.5 kW to 90 kW with 4 kHz pulse frequency
However, operation with resid-
without filters, EMC filters of Note: Please observe derat-
ual current operated devices
Class B from Schaffner can be ing for frame sizes FX and
with a trigger value of 300 mA
used. GX.
is possible. Please refer to the
• The output frequency is lim-
Instruction Manual for details.
ited to 150 Hz
• Operation and commission-
ing only with connected mo-
tor as the LC filter/sinusoidal
filter is not idling-proof!
3
■ Technical data
LC filter and sinusoidal filter
MICROMASTER 430
Options
Variant dependent options
MICROMASTER 430
Options
Variant dependent options
■ Overview
Line commutating choke No limits are currently defined Output choke Gland plate
in the EN 61 000-3-2 standard
Line commutating chokes are Output chokes can be sup- Gland plates are available for
for professionally used devic-
used to smooth voltage peaks plied for reducing the capaci- inverters of frame size C. All
es with a connected load
or to bridge commutating tive compensation currents the other frame sizes have the
> 1 kW.
dips. and dV/dt in the case of motor shield connection for the con-
In addition, line commutating This means that the inverters cables >50 m (shielded) or trol cable integrated in the in-
chokes reduce the effects of with an output power > 100 m (unshielded). verter.
harmonics on the inverter and ³ 0.75 kW comply with the
For max. permissible cable The shield for the power cable
the power supply. If the line EN 61 000-3-2 standard.
lengths, see Technical Data. has to be connected external-
impedance is < 1 %, a line
However, in accordance with ly (e.g. in the control cabinet).
commutating choke must be
the regulations of EN 61000-3- Exception: Inverters of frame
used in order to reduce the
12 “Limits for harmonic cur- sizes D and E and frame size
current peaks.
rents > 16 A and £ 75 A per F with integrated class A filter.
phase” an approval is neces- In this case the shield con-
sary from the power supplier nection is integrated in the in-
for drives that are intended to verter.
be connected to the public
The gland plate facilitates the
low-voltage network. Please
shield connection of power
refer to the Operating Instruc-
and control cables and thus
tions for the values of the har-
ensures optimum EMC perfor-
monic currents.
mance.
■ Technical data
Max. permissible cable Note:
lengths from the motor to
Operation up to 150 Hz output
the inverter when using out-
frequency only!
put chokes
The following table shows the
maximum permissible cable
lengths from the motor to the
inverter when using output
chokes.
3
Frame size Output choke Max. permissible motor cable lengths (shielded/unshielded)
for a mains voltage of
(FS) Type 380 V to 400 V ± 10 % 401 V to 480 V ± 10 %
C 6SE6400-3TC03-2CD3 200 m/300 m 100 m/150 m
D to F 6SE6400-3TC . . -. . D0 200 m/300 m 200 m/300 m
FX 6SL3000-2BE32-1AA0 300 m/450 m 300 m/450 m
FX 6SL3000-2BE32-6AA0 300 m/450 m 300 m/450 m
GX 6SL3000-2BE33-2AA0 300 m/450 m 300 m/450 m
GX 6SL3000-2BE33-8AA0 300 m/450 m 300 m/450 m
GX 6SL3000-2BE35-0AA0 300 m/450 m 300 m/450 m
MICROMASTER 430
Options
Variant dependent options
■ Design
General installation instructions
■ A maximum of two footprint ■ The EMC filter must be
components plus inverter mounted directly below the
are permissible. frequency inverter if pos-
■ If an LC filter is used, it must sible.
be mounted directly on the ■ If mounted on the side, the
wall of the control cabinet line-side components are to
due to weight reasons. be mounted to the left of the
G_DA51_EN_05042c
If an LC filter of frame size C frequency inverter whereas
is used, therefore, only one the output-side compon-
footprint component is per- ents are to be mounted to
missible. If a line choke and the right of the frequency
LC filter are used, the line inverter. Position 2
choke must be located on
the left of the inverter.
Required distance between Position 1
line choke and inverter:
75 mm.
Frame size
C D E F G FX GX
Line commutating choke ✓ ✓ ✓
EMC filter ✓
LC filter
Output choke
✓
✓
3
Recommended combinations of inverters and options
MICROMASTER 430
Options
Variant dependent options
MICROMASTER 430
Options
Variant dependent options
MICROMASTER 430
Options
Variant independent options
■ Overview
Basic Operator Panel 2 PROFIBUS module CANopen module Start-up tools
(BOP-2)
For a complete PROFIBUS Using the CANopen commu- • STARTER
With the BOP-2, individual pa- connection with up to nications module, an inverter is a graphic start-up soft-
rameter settings can be made. £12 Mbaud. Remote control can be linked to the CANopen ware for guided start-up for
Values and units are shown on of the inverter is possible with fieldbus system and remote MICROMASTER 410/420/
a 5-digit display. the PROFIBUS module. Re- control is then possible. 430/440 frequency inverters
mote control and operation at under Windows 2000/
Remote control and operation
the inverter can be combined XP Professional. Parameter
at the inverter can be com-
using an operator panel lists can be read out, al-
bined using an operator panel
plugged onto the PROFIBUS tered, stored, entered and
plugged onto the CANopen
module. The PROFIBUS mod- printed.
module.
ule can be supplied by an ex-
• DriveMonitor
ternal 24 V DC power supply The module is connected to
is a start-up software for list-
and is thus also active when the bus system through a
oriented programming of
the inverter is disconnected 9-pin Sub-D connector.
frequency inverters. This
from the power supply.
program executes under
Connection kit for
Connection by means of a Windows 98/NT/2000/ME/
PC to inverter
9-pin Sub-D connector (avail- XP Professional.
able as an option). For controlling an inverter di-
Both programs are included
rectly from a PC if the appro-
Basic Operator Panel (BOP-2) on the Docu DVD which is pro-
DeviceNet module priate software has been in-
vided with every inverter.
stalled (e.g. STARTER).
A BOP-2 can be used for sev- For networking the inverters to
Isolated RS-232 adapter mod-
eral inverters. It can be direct- the DeviceNet fieldbus system
ule for reliable point-to-point
ly mounted on the inverter or in widely used on the American
connection to a PC. Includes a
a control cabinet door using a market. A maximum transmis-
Sub-D connector and an
mounting kit. sion rate of 500 kbaud is pos-
RS-232 standard cable (3 m).
sible. Remote control of the in-
verter is possible with the
Operator panel door mount-
DeviceNet module.
ing kit for single inverter
Remote control and operation
For mounting an operator pan-
at the inverter can be com-
el BOP-2 in a control cabinet
bined using an operator panel
door. Degree of protection
plugged onto the DeviceNet
3 module.
IP56. Contains a cable adapt-
er module with screwless ter- 1) A shielded cable of type
The connection to the minals for use with user's own Belden 8132 (28 AWG) is
DeviceNet bus system is RS-232 cables 1). recommended.
The maximum cable length is
made using a 5-pin connector 5 m for RS-232.
with terminal strip.
MICROMASTER 430
Options
Variant independent options
MICROMASTER 430
Options
Variant independent options
Documentation
1) The DVD contains operating Available on the Internet: STARTER at 2) Available on the Internet at
instructions, parameter list, DriveMonitor at http://support.automation. http://support.automation.
commissioning tools STARTER http://support.automation. siemens.com/WW/view/en/ siemens.com/WW/view/en/
and DriveMonitor, multilan- siemens.com/WW/view/en/ 10804985/133100 10804926/133300
guage. 10804984/133100
MICROMASTER 430
Dimension drawings
Drill pattern
204 (8.03)
ADA51-5009b
245 (9.65)
309 (12.16)
ADA51-5002d
174 (6.85)
Fixing with
(7 195
8)
4 x M5 bolts
.6
4 x M5 nuts
185 (7.28) 4 x M5 washers
Inverter frame size C Tightening torque with washers fitted:
3.0 Nm
Inverter frame size C
Ventilation clearance required at top with gland plate
and bottom: 100 mm
Drill pattern
Drill pattern
3
616.4 (24.27)
650 (25.59)
520 (20.47)
486 (19.13)
ADA51-5021b
ADA51-5020b
235 (9.25)
235 (9.25)
(9 245
5)
(9 245
5)
.6
MICROMASTER 430
Dimension drawings
Drill pattern
Drill pattern
1110 (43.70)
1150 (45.28)
850 (33.46)
810 (31.89)
ADA51-5023b
ADA51-5022b
(1 320
6)
6)
4 x M8 bolts 4 x M8 bolts
2.
2.
MICROMASTER 430
Dimension drawings
Drill pattern
Drill pattern
125 125
(4.92) (4.92)
125 125
(4.92) (4.92)
1508 (59.37)
1533 (60.35)
1375 (54.13)
1400 (55.12)
G_DA51_EN_05075
G_DA51_EN_05074
125 125
(4.92) (4.92)
3
125 125
1. 5
)
(4.92) (4.92)
46
(2 54
4. 6
)
06
(1 35
Fixing with
326 Fixing with 326 6 x M8 bolts
(12.83) 6 x M8 bolts (12.83) 6 x M8 nuts
6 x M8 nuts 6 x M8 washers
Inverter frame size FX 6 x M8 washers Inverter frame size GX
Tightening torque
Tightening torque with washers
with washers fitted: 13.0 Nm
fitted: 13.0 Nm Ventilation clearance
Ventilation clearance required:
required: at top: 250 mm
at top: 250 mm at bottom: 150 mm
at bottom: 150 mm in front: 50 mm
in front: 40 mm
MICROMASTER 430
Dimension drawings
■ EMC filter
38 185 (7.28)
(1.5) 156 (6.14)
4 x M4
219 (8.62)
232 (9.13)
245 (9.65)
204 (8.03)
G_DA51_EN_00063
55 (2.17)
174
(6.85)
b1
n4
b
c
n3
a
a1
G_DA51_XX_05103
MICROMASTER 430
Dimension drawings
■ LC filter
174 (6.85)
320 (12.6)
335 (13.19)
382 (15.04)
G_DA51_EN_05078a
G_DA51_EN_05081
156 (6.14)
(FS)
a b c n1 n2 kg
6SE6400-3TD03-7DD0 D 278 240 230 115 190 21.0
(10.94) (9.45) (9.06) (4.53) (7.48)
6SE6400-3TD04-8DD0 D 290 240 240 125 190 26.0
(11.42) (9.45) (9.45) (4.92) (7.48)
6SE6400-3TD06-1DD0 D 345 300 220 120 240 34.0
(13.58) (11.81) (8.66) (4.72) (9.45)
a
MICROMASTER 430
Dimension drawings
■ Sinusoidal filter
G_DA51_XX_00013
a
n1
c
n2 n3 n4
Sinusoidal filter for frame sizes FX and GX
b
G_DA51_XX_00014
a
3
n1
c
n2 n3 n4
Sinusoidal filter for frame size GX
MICROMASTER 430
Dimension drawings
c b c b
G_DA51_XX_00064
a
a
d
e
DA51-5051
Line commu- Dimensions Weight Line commutating Dimensions Weight
tating choke (max.) choke for (max.)
for a b c d e kg a b c kg
Frame size C 245 185 50 264 280 5.1 Frame size D 520 275 85 9.5
(9.65) (7.28) (1.97) (10.39) (11.02) (20.47) (10.83) (3.35)
Frame size E 650 275 95 17.0
(25.59) (10.83) (3.74)
Line commutating choke for frame size C Line commutating choke for frame sizes D and E
b
c
G_DA51_XX_05052
choke (max.)
Type 6SE6400- Frame size a b c n1 n2 kg
3CC11-.... F 228 240 141 95 185 25.0
(8.98) (9.45) (5.55) (3.74) (7.28)
n1
n2
b
c
MICROMASTER 430
Dimension drawings
■ Output chokes
c b
G_DA51_XX_05050a
(max.)
a b c kg
Frame size C 245 185 80 6.6
(9.65) (7.28) (3.15)
b
Output for inverter Dimensions Weight
c
choke Frame size (max.)
Type (FS) a b c n1 n2 kg
6SE6400-
G_DA51_XX_05052
b
Output for inverter Dimensions Weight
c choke Frame size (max.)
Type (FS) a b c n1 n2 kg
6SL3000-
2BE32-1AA0 FX 285 300 257 163 224 60.0
(11.22) (11.81) (10.12) (6.42) (8.82)
G_DA51_XX_05053
Output chokes
for inverters of size FX and GX