Professional Documents
Culture Documents
Ref: SCGR GW Issue No: 1 Issue Date: Mar 2010 Page No: 1 of 2
Scotgrip gangway treads incorporate the unique Scotgrip high-traction anti-slip safety surface which gives a sound foot-holding in the most extreme conditions. These tough and durable products are manufactured under bS EN iS0 9001:2008 quality controlled conditions comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip quality standard, these products are fire rated, spark and friction tested.
Marine gangways are renowned for being extremely dangerous, especially when the angle of the gangway is steep and the surface is wet or oily or both. Some gangways have metal or wooden spars across the surface which can be a trip hazard in itself. By installing Scotgrip Gangway treads not only is this slip hazard eliminated but the lifespan of the underlying material is greatly increased. Scotgrip Gangway treads have been designed in 3 different styles (stepped, bar and elliptical) to suit your individual location. These heavy duty products are easily fitted onto open grating/grille, chequered plate or wood. Eliminates Slips and Trips Cost effective High traction anti-slip safety products Tough and durable Standard sizes and custom made Fully guaranteed Fire rated, spark and friction tested Non corrosive Easy to fit over existing gangways Reflects positively on personnel performance
Call us with your requirements. Eliminate Slips and Trips on your gangways.
FQM
Facilitators Quality Management
No. 23136
No. 10041261
gangways
HigH-TRACTioN ANTi-SLiP
Scotgrip Gangway treads will provide a sound foot-holding even in the most extreme conditions and will eliminate Slips and Trips in your working environment. Surface grades: High Profile 6mm aggregate (1/4 approx.) Low Profile 3mm aggregate (1/8 approx.) Fine Profile 1mm aggregate (1/16 approx.)
HigHLy viSibLE
Colour coded in a wide range of colour schemes to suit individual locations. Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available please ask.
EASE oF iNSTALLATioN
Scotgrip Gangway treads are designed for quick and secure fitting, either by mechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip products are non-load bearing and must have a suitable underlying structure to be secured to.
For further advice or information contact: Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UK Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260 Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USA Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
Copyright 2010. Scotgrip is a registered trademark of Scotgrip (UK) Limited
Scotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip anti-slip safety products as part of a continuous programme of improvement and innovation.
gangways
Ref: SCGR GW
Issue No: 1
Page No: 2 of 2