Professional Documents
Culture Documents
Ref: SCGR Safegrip Issue No: 1 Issue Date: Mar 2010 Page No: 1 of 2
Scotgrip Safegrip stair nosings incorporate the unique Scotgrip high-traction anti-slip safety surface which gives a sound foot-holding. These tough and durable products are manufactured under bS EN iS0 9001:2008 quality controlled conditions comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip quality standard, these products are fire rated, spark and friction tested.
The leading edge of a step is the most dangerous part, especially if it has been damaged, worn smooth or rounded by constant use. By installing Scotgrip Safegrip stair nosings not only is this slip hazard eliminated but the lifespan of the step is greatly increased. These products are easily fitted onto open grating/grille, chequered plate, concrete or wood.
Eliminates Slips and Trips Cost effective High traction anti-slip safety products Tough and durable Standard sizes and custom made Fully guaranteed Fire rated, spark and friction tested Non corrosive Easy to fit over existing steps Reflects positively on personnel performance
Call us with your requirements. Eliminate Slips and Trips on your stairways.
FQM
Facilitators Quality Management
No. 23136
No. 10041261
Stairways - Safegrip
Code GSN
HigH-TRACTioN ANTi-SLiP
Scotgrip Safegrip stair nosings will provide a sound foot-holding and will eliminate Slips and Trips in your working environment. Surface grade: Fine Profile 1mm aggregate (1/16 approx.)
FiTTiNg dATA
Fitting onto: Open grating/grille Chequered plate Concrete Wood Method Type S fixings (saddle assemblies) Self tap screws or nut, bolt and washer HPS impact fixings screws or adhesive
HigHLy viSibLE
Colour coded in a wide range of colour schemes to suit individual locations. Colour codes are: safety yellow Other colours available please ask.
EASE oF iNSTALLATioN
Scotgrip Safegrip stair nosings are designed for quick and secure fitting, either by mechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip products are non-load bearing and must have a suitable underlying structure to be secured to.
STANdARd SizES
bREAdTH (dEPTH)
mm inches
40 11/2 18 24 30 36 48
80 3
100 4
130 5
160 6
200 8
260 10
LENgTH
For further advice or information contact: Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UK Tel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260 Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USA Tel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267
Copyright 2010. Scotgrip is a registered trademark of Scotgrip (UK) Limited
Scotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip anti-slip safety products as part of a continuous programme of improvement and innovation.
Stairways - Safegrip
Issue No: 1
Page No: 2 of 2