Professional Documents
Culture Documents
加工寸法の普通許容差
JIS B 0405(1991)
〔技術データ〕
Surface Treatments Available for Molds JIS B 0419(1991)より抜粋
Overall
Gas furnace
Electric furnace
⃝Much deformation 5. 真直度及び平面度の普通公差 JIS B 0419−1991 単位:mm
Structural alloyed steel quenching Salt bath ⃝Processing required after quen-ching
呼び長さの区分
Carbon tool steel Frame quenching
Partial ⃝Partial quenching is available 10以下 10 を超え 30 を超え 100 を超え 0300を超え 1000を超え
quenching Laser quenching 公差等級
Quenching Alloyed tool steel 30 以下 100 以下 300 以下 1000以下 3000以下
13Cr stainless steels ⃝Higher abrasion resistance and pressure resistant strength 真直度公差及び平面度公差
Vacuum quenching ⃝Glossy finish can be maintained. 技
High-speed steel ⃝Select air-cooling steel
H 0.02 0.05 0.1 0.2 0.3 0.4 術
デ
K 0.05 0.1 0.2 0.4 0.6 0.8 ー
Quenching and Quenching the material with high ⃝Most abrasion resistant タ
Surface treatment after quenching L 0.1 0.2 0.4 0.8 1.2 1.6
surface treatment tempering resitance till very hard ⃝Suitable to mass production and engineering plastic
Reference:KATA-GIJUTSU
(1989.10)
1119 1120