Professional Documents
Culture Documents
Laboratory Test No Date Tested Customer : TS20110927-1 : 27/09/2011 : PT JGC Indonesia Page No : 1 Total Page : 3
PO/ Order No. Your Ref Date of Receipt of Test Items Reference Code Subject (as received)
: 0-5151-P-2120-001-AJ10 : : 26/09/2011 : ASTM A320 / A370 : Received grade L43 with heat number of 02006 to perform mechanical test as per A370 which are tensile strength, chemical composition charpy and hardness. Size M22 Tensile Test: Test Temperature: 23.8C ; Test Method: A370 Type of Test Specimen: Test Specimen Measured Diameter (mm) Measured Thickness(mm) Measured Width (mm) Effective Area (mm2) Yield Load (kN) Yield Stress (N/mm2) Ultimate Tensile Load (kN) Ultimate Tensile Stress (N/mm2) Gauge Length(mm) Elongation (%) Reduction of area (%) Chemical Analysis: Test Method: Sample Identification Test sample Average Test Conducted By Test Witnessed By Remarks Equipment Used C 0.392 0.383 0.388 Si 0.305 0.265 0.285 Elements Analysed (%) P S Mn Cr 0.0081 0.0241 0.768 0.796 0.0068 0.0208 0.757 0.788 0.0074 0.0224 0.762 0.792 Base Metal 12.53
Approved Signatory;
Control Form No: SBN/TR/0000, Date of Issue: . This results reported herein have been performed in accordance with the laboratory's terms of accreditation under Laboratory Accreditation Scheme of Malaysia. This report shall not be reproduced except in full, without the written approval of the laboratory.
TEST REPORT
Laboratory Test No Date Tested Customer : TS20110927-1 : 27/09/2011 : PT JGC Indonesia Page No : 2 Total Page : 3
PO/ Order No. Your Ref Date of Receipt of Test Items Reference Code Subject (as received)
: 0-5151-P-2120-001-AJ10 : : 26/09/2011 : ASTM A320 / A370 : Received grade L43 with heat number of 02006 to perform mechanical test as per A370 which are tensile strength, chemical composition charpy and hardness. Size M22
Charpy Impact Test Test Method: ASTM A370 Specimen Dimension (mm) V-Notch Position 10 x 10 x 55mm / Testing Temparature : -101C Impact Energy Lateral Shear Percentage Specimen No (J) Expansion (mm) (%) 1 35.16 NA NA 2 31.73 3 34.18 Average 33.69
Remarks
Longitudinal Specimen
Approved Signatory
Control Form No: SBN/TR/0000, Date of Issue: . This results reported herein have been performed in accordance with the laboratory's terms of accreditation under Laboratory Accreditation Scheme of Malaysia. This report shall not be reproduced except in full, without the written approval of the laboratory.
TEST REPORT
Laboratory Test No Date Tested Customer : TS20110927-1 : 27/09/2011 : PT JGC Indonesia Page No :3 Total Page : 3
PO/ Order No. Your Ref Date of Receipt of Test Items Reference Code Subject (as received)
: 0-5151-P-2120-001-AJ10 : : 26/09/2011 : ASTM A320 / A370 : Received grade L43 with heat number of 02006 to perform mechanical test as per A370 which are tensile strength, chemical composition charpy and hardness. Size M22
Approved Signatory
Control Form No: SBN/TR/0000, Date of Issue: . This results reported herein have been performed in accordance with the laboratory's terms of accreditation under Laboratory Accreditation Scheme of Malaysia. This report shall not be reproduced except in full, without the written approval of the laboratory.
TEST REPORT
Laboratory Test No Date Tested Customer : TS20110927-1 : 27/09/2011 : PT JGC Indonesia Page No : 1 Total Page : 3
PO/ Order No. Your Ref Date of Receipt of Test Items Reference Code Subject (as received)
: 0-5151-P-2120-001-AJ10 : : 26/09/2011 : ASTM A320 / A370 : Received grade L43 with heat number of 04007 to perform mechanical test as per A370 which are tensile strength, chemical composition charpy and hardness. Size M25 Tensile Test: Test Temperature: 23.6C ; Test Method: A370 Type of Test Specimen: Test Specimen Measured Diameter (mm) Measured Thickness(mm) Measured Width (mm) Effective Area (mm2) Yield Load (kN) Yield Stress (N/mm2) Ultimate Tensile Load (kN) Ultimate Tensile Stress (N/mm2) Gauge Length(mm) Elongation (%) Reduction of area (%) Chemical Analysis: Test Method: A751 Sample Identification Test sample Average Test Conducted By Test Witnessed By Remarks Equipment Used C 0.393 0.39 0.392 Si 0.266 0.257 0.261 Elements Analysed (%) P S Mn Cr 0.0138 0.0321 0.765 0.762 0.0074 0.0184 0.766 0.766 0.0106 0.0252 0.766 0.764 Base Metal 12.52
Approved Signatory;
Control Form No: SBN/TR/0000, Date of Issue: . This results reported herein have been performed in accordance with the laboratory's terms of accreditation under Laboratory Accreditation Scheme of Malaysia. This report shall not be reproduced except in full, without the written approval of the laboratory.
TEST REPORT
Laboratory Test No Date Tested Customer : TS20110927-1 : 27/09/2011 : PT JGC Indonesia Page No : 2 Total Page : 3
PO/ Order No. Your Ref Date of Receipt of Test Items Reference Code Subject (as received)
: 0-5151-P-2120-001-AJ10 : : 26/09/2011 : ASTM A320 / A370 : Received grade L43 with heat number of 04007 to perform mechanical test as per A370 which are tensile strength, chemical composition charpy and hardness. Size M25
Charpy Impact Test Test Method: ASTM A370 Specimen Dimension (mm) V-Notch Position 10 x 10 x 55mm / Testing Temparature : -101C Impact Energy Lateral Shear Percentage Specimen No (J) Expansion (mm) (%) 1 39.79 NA NA 2 40.18 3 37.53 Average 39.16
Remarks
Longitudinal Specimen
Approved Signatory
Control Form No: SBN/TR/0000, Date of Issue: . This results reported herein have been performed in accordance with the laboratory's terms of accreditation under Laboratory Accreditation Scheme of Malaysia. This report shall not be reproduced except in full, without the written approval of the laboratory.
TEST REPORT
Laboratory Test No Date Tested Customer : TS20110927-1 : 27/09/2011 : PT JGC Indonesia Page No :3 Total Page : 3
PO/ Order No. Your Ref Date of Receipt of Test Items Reference Code Subject (as received)
: 0-5151-P-2120-001-AJ10 : : 26/09/2011 : ASTM A320 / A370 : Received grade L43 with heat number of 04007 to perform mechanical test as per A370 which are tensile strength, chemical composition charpy and hardness. Size M25
Approved Signatory
Control Form No: SBN/TR/0000, Date of Issue: . This results reported herein have been performed in accordance with the laboratory's terms of accreditation under Laboratory Accreditation Scheme of Malaysia. This report shall not be reproduced except in full, without the written approval of the laboratory.